Beruflich Dokumente
Kultur Dokumente
Series|DCS05
Excavator weight class: 1 - 2 t
Two-shell excavation grab
84
30
650
840
790
E
690
Technical specifications|DCS05
Excavator weight class: t 1 – 2
Max. load bearing capacity t Grab: 1/rotary motor 2.5
Bulk weight up to t/m³ 2
Max. operating pressure bar 250 (gripping and slewing
function)
Max. closing force kN 20
|Use: Miniexcavator and truck loading crane
Multipurpose excavation grab for typical hydraulic
excavator tasks such as excavation and digging
natural soil, digging ditches and cable trenches,
loading dirt, gravel and sand.
|Design features
• The shells are exchangeable within the entire
series
• Continuously rotatable hydraulic compact
rotary motor
• Complete shell made of high-strength fine-
grained steel (HB 450)
• Forged 2-hole screw-on teeth
• Horizontal, protected lifting cylinder
• Hose hoop guard for the hose connections
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|DCS1
Excavator weight class: 1 - 5 t
Two-shell excavation grab
Technical specifications|DCS1
Excavator weight class: t 1 – 5
Max. load bearing capacity t Grab: 1/rotary motor 2.5
Bulk weight up to t/m³ 2
Max. operating pressure bar 250 (gripping and slewing
function)
Max. closing force kN 24
|Use: Miniexcavator and truck loading crane
Multipurpose excavation grab for typical hydraulic
excavator tasks such as excavation and digging na-
tural soil, digging ditches and cable trenches, loading
dirt, gravel and sand.
|Design features
• The shells are exchangeable within the entire
series
• Continuously rotatable hydraulic compact
rotary motor
• Complete shell made of high-strength fine-
grained steel (HB 450)
• Forged 2-hole screw-on teeth
• Hose hoop guard for the hydraulic
connections on the rotary motor
Series|DCS2
Excavator weight class: 5 - 9 t
Two-shell excavation grab
84
30
1285
970
1300
E
1180
Technical specifications|DCS2
Excavator weight class: t 5 - 9
Max. load bearing capacity t Grab: 2/rotary motor 4
Bulk weight up to t/m³ 2
Max. operating pressure bar 300 (gripping and slewing
function)
Max. closing force kN 20
|Use: Miniexcavator and truck loading crane
Multipurpose excavation grab for typical hydraulic
excavator tasks such as excavation and digging
natural soil, digging ditches and cable trenches,
loading dirt, gravel and sand.
|Design features
• The shells and shell carriers are
exchangeable with a 3-point plug-in system
within the entire series
• Continuously rotatable hydraulic compact
rotary motor
• Base and side edges made of high-strength
fine-grain steel (HB 450)
• Forged 2-hole screw-on teeth
• Piston rod protection, hose hoop guard for
the hydraulic connections on the rotary
motor
|Available accessories and equipment
• Hose set and mounting for all known
excavator manufacturers
• Mounting with pendular brake
• Ejector, grab extension
• Load hooks, bucket teeth
• Special shells according to customer
specifications
• Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|DCS3
Excavator weight class: 9 - 15 t
Two-shell excavation grab
115
70
1465
1820
1445 E
1295
Technical specifications|DCS3
Excavator weight class: t 9 - 15
Max. grab load bearing capacity t Grab: 2 / slewing gear: 10
Bulk weight up to t/m³ 2
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. closing force kN 40
|Use: Mobile and chain excavators
Multipurpose excavation grab for typical hydraulic
excavator tasks such as excavation and digging na-
tural soil, digging ditches and cable trenches, loading
dirt, gravel and sand, lifting objects of all kinds.
|Design features
• The shells and shell carriers are
exchangeable with a 3-point plug-in system
within the entire series
• Continuously rotatable hydraulic rotary drive
• Side and base edges made of high-strength
fine-grain steel (HB 450)
• Forged 3-hole screw-on teeth, piston rod
protection, hose protective plate for the
hydraulic connections on the slewing gear
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|DCS4
Excavator weight class: 13 - 21 t
Two-shell excavation grab
115
70
1585
2075
1690
E
1490
Technical specifications|DCS4
Excavator weight class: t 13 - 21
Max. grab load bearing capacity t Grab: 4 / slewing gear: 10
Bulk weight up to t/m³ 3
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. closing force kN 67
|Use: Mobile and chain excavators
Multipurpose excavation grab for typical hydraulic
excavator tasks such as excavation and digging na-
tural soil, digging ditches and cable trenches, loading
dirt, gravel and sand, lifting objects of all kinds.
|Design features
• The shells and shell carriers are
exchangeable with a 3-point plug-in system
within the entire series
• Continuously rotatable hydraulic rotary drive
• Side and base edges made of high-strength
fine-grain steel (HB 450)
• Forged 3-hole screw-on teeth, piston rod
protection, hose protective plate for the
hydraulic connections on the slewing gear
Series|DCS5
Excavator weight class: 22 - 30 t
Two-shell excavation grab
115
70
1825
2415
2005
1720 E
Technical specifications|DCS5
Excavator weight class: t 22 - 30
Max. grab load bearing capacity t Grab: 6 / slewing gear: 15
Bulk weight up to t/m³ 3
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. closing force kN 95
|Use: Mobile and chain excavators
Multipurpose excavation grab for typical hydraulic
excavator tasks such as excavation and digging na-
tural soil, digging ditches and cable trenches, loading
dirt, gravel and sand, lifting objects of all kinds.
|Design features
• The shells and shell carriers are
exchangeable with a 3-point plug-in system
within the entire series
• Continuously rotatable hydraulic rotary drive
• Side and base edges made of high-strength
fine-grain steel (HB 450)
• Forged 3-hole screw-on teeth, piston rod
protection, hose protective plate for the
hydraulic connections on the slewing gear
|Available accessories and equipment
• Hose set and mounting for all known
excavator manufacturers
• Mounting with pendular brake
• Load hooks, bucket teeth
• Compact motor
• Ejector, grab extension
• Special shells (such as round hole shells, HD
design)
• Special shells according to customer
Fig.: DCS5 with integrated motor specifications
• Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|DC2.5 - RW
Excavator weight class: 13 - 21 t
Two-shell excavation grab
|Design features
• Short design especially for rail construction with a
2-way excavator
• The shells and shell carriers are exchangeable with
a 3-point plug-in system within the entire series
• Continuously rotatable hydraulic rotary drive
• Side and base edges made of high-strength fine-
grain steel (HB 450)
• Forged 3-hole screw-on teeth
• Piston rod protection, hose protective plate for the
hydraulic connections on the slewing gear
|Available accessories and equipment
• Hose set and mounting for all known excavator
manufacturers
• Mounting with pendular brake
• Grab extension
• Compact motor
• Load hooks, bucket teeth
• Special shells (such as round hole shells, HD
design)
• Special shells according to customer
specifications
• Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|RCS4
Excavator weight class: up to 30 t
Two-shell loading grab
Technical specifications|RCS4
Excavator weight class t up to 30
Max. grab load bearing capacity t Grab: 4 / slewing gear: 15
Bulk weight up to t/m3 2
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 18
|Use: Mobile and chain excavators
Optimized grabs for the easy transfer of flowing
bulk materials such as gravel, sand, pebbles,
grain, feed, fertilizer, ore, coal, etc.
|Design features
• The shells are exchangeable within the entire
series
• Continuously rotatable hydraulic rotary drive
• Lifting cylinder with dampened end position
• Side and base edges of high-strength fine-
grained steel (HB 450) and reinforced with
weld-on profiles (HB 500)
• Piston rod protection
• Hose protective plate for the hydraulic
connections on the slewing gear
• Sealed shell and synchronized bearings
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|RCS5
Excavator weight class: up to 60 t
Two-shell loading grab
Technical specifications|RCS5
Excavator weight class t up to 60
Max. load bearing capacity t Grab: 8/rotary motor 15
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 12
|Use: Mobile and chain excavators
Optimized grabs for the transfer of bulk materials
such as gravel, sand, pebbles, grain, feed, fertilizer,
ore, coal, etc.
|Design features
• The shells are exchangeable within the entire
series
• Continuously rotatable hydraulic rotary drive
• Lifting cylinder with dampened end position
• Side and base edges of high-strength fine-
grained steel (HB 450) reinforced with weld-
on profiles (HB 500)
• Hose protective plate for the hydraulic
connections on the slewing gear
• Piston rod protection
• Sealed shell and synchronized bearings
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|RCS6
Excavator weight class: up to 80 t
Two-shell loading grab
Technical specifications|RCS6
Excavator weight class t up to 80
Max. grab load bearing capacity t Grab: 12 / slewing gear: 35
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 10
|Use: Mobile and chain excavators
Optimized grabs for the easy transfer of flowing
bulk materials such as gravel, sand, pebbles,
grain, feed, fertilizer, ore, coal, etc.
|Design features
• The shells are exchangeable within the entire
series
• Continuously rotatable hydraulic rotary drive
• Lifting cylinder with dampened end position
• Side and base edges of high-strength fine-
grained steel (HB 450) reinforced with weld-
on profiles (HB 500)
• Piston rod protection
• Hose protective plate for the hydraulic
connections on the slewing gear
• Sealed shell and synchronized bearings
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|RCS7
Excavator weight class: up to 100 t
Two-shell loading grab
Technical specifications|RCS7
Excavator weight class t up to 100
Max. grab load bearing capacity t Grab: 15 / slewing gear: 40
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 8
|Use: Mobile and chain excavators
Optimized grabs for the easy transfer of flowing
bulk materials such as gravel, sand, pebbles,
grain, feed, fertilizer, ore, coal, etc.
|Design features
• The shells are exchangeable within the entire
series Continuously rotatable hydraulic rotary
drive
• Lifting cylinder with dampened end position
• Side and base edges of high-strength fine-
grained steel (HB 450) reinforced with weld-
on profiles (HB 500)
• Piston rod protection
• Hose protective plate for the hydraulic
connections on the slewing gear
• Sealed shell and synchronized bearings
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|RGF4
Excavator weight class: up to 30 t
Two-shell loading grab
Technical specifications|RGF4
Excavator weight class t up to 25
Max. grab load bearing capacity t Grab: 4 / slewing gear: 15
Bulk weight up to t/m3 2
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 18
|Use: Mobile and chain excavators
Optimized grabs for the easy transfer of light flo-
wing bulk materials such as grain, feed, fertilizer,
etc.
|Design features
• The shells are exchangeable within the entire
series
• Continuously rotatable hydraulic rotary drive
• Lifting cylinder with dampened end position
• Side and base edges of high-strength fine-
grained steel (HB 450) reinforced with weld-
on profiles (HB 500)
• Hose protective plate for the hydraulic
connections on the slewing gear
• The hydraulic lines run protected in the arm
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|RGF5
Excavator weight class: up to 70 t
Two-shell loading grab
Technical specifications|RGF5
Excavator weight class t up to 70
Max. grab load bearing capacity t Grab: 6 / slewing gear: 26
Bulk weight up to t/m3 2
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 12
|Use: Mobile and chain excavators
Optimized grabs for the easy transfer of light flo-
wing bulk materials such as grain, feed, fertilizer,
etc.
Fig.: RGF5 Woodchip shape
|Design features
• The shells are exchangeable within the
entire series
• Continuously rotatable hydraulic rotary
drive
• Lifting cylinder with dampened end
position
• Side and base edges of high-strength fine-
grained steel (HB 450) and reinforced with
weld-on profiles (HB 500)
• Hose protective plate for the hydraulic
connections on the slewing gear
• The hydraulic lines run protected in the arm
|Available accessories and equipment
• Hose set and mounting for all known
excavator manufacturers
• Grab extension
• Load hooks
• Shell seal/cover
• Exchangeable cutting edge
• Special shells according to customer
specifications
• Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|FRCS6
Excavator weight class: up to 45 t
Two-shell loading grab
Technical specifications|FRCS6
Excavator weight class t up to 45
Max. grab load bearing capacity t Grab: 8 / slewing gear: 26
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 12
|Use: Mobile and chain excavators
Optimized grabs for the easy transfer of flowing
bulk materials such as gravel, sand, pebbles,
grain, feed, fertilizer, ore, coal, etc.
|Design features
• Extremely flat closing curve for the special
context of unloading ships and rail cars
• The shells are exchangeable within the entire
series
• Continuously rotatable hydraulic slewing gear
• Lifting cylinder with dampened end position
• Side and base edges of high-strength fine-
grained steel (HB 400) reinforced with weld-
on profiles (HB 500)
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|TG1
Excavator weight class: up to 7 t
Wood loading grab
TG1-350 0.35 235 1190 1115 100 885 1950 470 / 520 800
Technical specifications|TG1
Excavator weight class t up to 7
Max. grab load bearing capacity t Grab: 4 / slewing gear: 4
Max. operating pressure bar 250 (grab function) /
250 (turning function)
Max. speed RPM 12
|Use: Miniexcavator
Orange peel grab for logs and round timber. Due
to the shape of the tines, the TG1 wood grab
can easily pick up one or more logs of different
diameter from the ground, a stack or truck and
confidently hold and handle them.
|Design features
• Continuously rotatable hydraulic
compact rotary motor
• Complete grip made of high-strength
fine-grained steel (HB 450)
• Flat, compact design
• Hose hoop guard for the hydraulic
connections on the slewing gear
• The hydraulic lines and synchronized
control run protected in the arm
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|TG2
Excavator weight class: up to 14 t
Wood loading grab
Technical specifications|TG2
Excavator weight class t up to 14
Max. grab load bearing capacity t Grab: 5 / slewing gear: 5
Max. operating pressure bar 250 (grab function) /
250 (turning function)
Max. speed RPM 12
|Use: Mobile and chain excavators
Orange peel grab for logs and round timber. Due
to the shape of the tines, the TG2 wood grab
can easily pick up one or more logs of different
diameter from the ground, a stack or truck and
confidently hold and handle them.
|Design features
• Continuously rotatable hydraulic compact
rotary motor
• Complete grip made of high-strength fine-
grained steel (HB 450)
• Flat, compact design
• Hose hoop guard for the hydraulic
connections on the slewing gear
• The hydraulic lines and synchronized control
run protected in the arm
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|TG4
Excavator weight class: up to 25 t
Wood loading grab
TG4-650-B 0.65 1015 660/520 6 2540 2050 150 900 1950 2090 114 70
TG4-1000-B 1.0 1145 860/660 3 2820 2190 210 1150 2445 2610 114 70
Technical specifications|TG4
Excavator weight class t up to 25
Max. grab load bearing capacity t Grab: 4 / slewing gear: 15
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 12
|Use: Mobile and chain excavators
Orange peel grab for logs and round timber. Due
to the shape of the tines, the TG4 wood grab
can easily pick up one or more logs of different
diameter from the ground, a stack or truck and
confidently hold and handle them.
|Design features
• Continuously rotatable hydraulic compact
rotary motor
• Complete grip made of high-strength fine-
grained steel (HB 450)
• Flat, compact design
• Hose protective plate for the hydraulic
connections on the slewing gear
• The hydraulic lines and synchronized control
run protected in the arm
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|TG4.6
Excavator weight class: up to 35 t
Wood loading grab
TG4.6-1000-B 1.0 1480 840/700 8 2950 2265 90 1150 2540 2745 114 70
TG4.6-1250-B 1.25 1530 840/700 6 3080 2310 110 1260 2765 3000 114 70
TG4.6-1750-B 1.75 1715 840/700 4 3310 2400 150 1500 3190 3450 114 70
TG4.6-2000-B 2.0 1915 840/700 3 3435 2435 240 1660 3390 3665 114 70
Technical specifications|TG4.6
Excavator weight class t up to 35
Max. grab load bearing capacity t Grab: 6 / slewing gear: 15
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 12
|Use: Mobile and chain excavators
Orange peel grab for logs and round timber. Due
to the shape of the tines, the TG4.6 wood grab
can easily pick up one or more logs of different
diameter from the ground, a stack or truck and
confidently hold and handle them.
|Design features
• Continuously rotatable hydraulic slewing gear
• Entire grip made of high-strength Welldox 700,
base edges (HB 500)
• Hydraulic cylinder with dampened end position
• Hose protective plate for the hydraulic
connections on the slewing gear
• Ram protection for the cylinder hydraulics
• Clamshell shape B ( box ) – Vertical inner claws
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|TG5.6
Excavator weight class: up to 80 t
Wood loading grab
TG5.6-1500-B 1.5 2240 840/700 8 3405 2525 120 1390 3055 3320 149 80
TG5.6-1750-B 1.75 2300 840/700 8 3520 2565 140 1510 3275 3550 149 80
TG5.6-2500-B 2.5 2470 840/700 6 3900 2695 170 1810 4000 4250 149 80
Technical specifications|TG5.6
Excavator weight class t up to 80
Max. grab load bearing capacity t Grab: 12 / slewing gear: 26
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 10
|Use: Mobile and chain excavators
Orange peel grab for logs and round timber. Due
to the shape of the tines, the TG4.6 wood grab
can easily pick up one or more logs of different
diameter from the ground, a stack or truck and
confidently hold and handle them.
|Design features
• Continuously rotatable hydraulic slewing gear
• Base edges made of high-strength fine-grain
steel (HB 500)
• Lifting cylinder with dampened end position
• Hose protective plates for the hydraulic
connections on the slewing gear
• Ram protection for the cylinder hydraulics
• Clamshell shape B ( box ) – Vertical inner
claws
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|TGR5.6
Excavator weight class: up to 80 t
Short lumber grab
TGR5.6-3000-C 3.0 2980 800 5.5 3380 1650 2580 2020 4590 149 80
TGR5.6-3200-C 3.2 3020 800 5.0 3460 1670 2655 2110 4730 149 80
Technical specifications|TGR5.6
Excavator weight class t up to 80
Max. grab load bearing capacity t Grab: 15 / slewing gear: 35
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 10
|Use: Mobile and chain excavators
Orange peel grab for a short lumber.
|Design features
• Continuously rotatable hydraulic slewing gear
• Base edges made of high-strength fine-grain
steel (HB 450)
• Base edges reinforced with weld-on profile
(HB 500)
• Hydraulic cylinder with a double dampened
end position
• Hose hoop guard for the hydraulic
connections on the slewing gear
• Insert chains to keep individual logs from
slipping
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|FMT4 -4
Excavator weight class: up to 30 t
Orange peel grab, 4-arm
FMT4-400-4 400 2.0 1210 1275 1675 1360 1540 2265 1700
FMT4-600-4 600 2.0 1270 1345 1765 1405 1540 2420 1810
FMT4-800-4 800 2.0 1345 1435 1860 1430 1560 2640 1970
Series|FMT4 -5
Excavator weight class: up to 30 t
Orange peel grab, 5-arm
FMT4-600-5 600 2.0 1520 1610 1730 1370 1540 2420 2230 4020
FMT4-800-5 800 2.0 1610 1720 1860 1430 1560 2640 2430 4180
Technical specifications|FMT4 -5
Excavator weight class t up to 30
Max. grab load bearing capacity t Grab: 4 / slewing gear: 15
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 18
|Use: Mobile and chain excavators
Special transfer and sorting grab for large and
bulky material such as found in quarries, scrap
sorting, garbage dumps and recycling facilities.
|Design features
• The shells are exchangeable within the entire series
• 5 shells made entirely of high-strength fine-grained steel
(HB 450) , 3-shell and 4-shell versions are available
• Shell tips of high-strength manganese steel
• Arm made entirely of high-strength fine-grained
steel (HB 450)
• Continuously rotatable hydraulic slewing gear
• Lifting cylinder with dampened end position
• flat, compact design - all hydraulic supply lines run
protected in the steel structure
• Hose protective plate for the hydraulic connections
on the slewing gear
|Available accessories and equipment
• Hose set and mounting for all known excavator
manufacturers
• Lifting eyes
• Customized and special shells according to
customer specifications
• Additional special equipment upon request
• Customized and special shells according to
customer specifications such as W-shaped shell
(railcar unloading) – vertical outer claws
• Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|FMT4.1 -4
Excavator weight class: up to 45 t
Orange peel grab, 4-arm
FMT4.1-800-4 800 2.0 1520 1595 1950 1570 1730 2600 1950
Technical specifications|FMT4.1-4
Excavator weight class t up to 45
Max. grab load bearing capacity t Grab: 8 / slewing gear: 25
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 18
|Use: Mobile and chain excavators
Special transfer and sorting grab for large and
bulky material such as found in quarries, scrap
sorting, garbage dumps and recycling facilities.
|Design features
• The shells are exchangeable within the entire
series
• 4 shells made entirely of high-strength fine-grained
steel (HB 450) , 3-shell and 5-shell versions are
available
• Shell tips of high-strength manganese steel
• Arm made entirely of high-strength fine-grained
steel (HB 450)
• Continuously rotatable hydraulic slewing gear
• Lifting cylinder with dampened end position
• flat, compact design - all hydraulic supply lines run
protected in the steel structure
• Hose protective plate for the hydraulic
connections on the slewing gear
|Available accessories and equipment
• Hose set and mounting for all known
excavator manufacturers
• Lifting eyes
• Customized and special shells according to
customer specifications
• Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|FMT4.1 -5
Excavator weight class: up to 40 t
Orange peel grab, 5-arm
FMT4-600-4 600 2.0 1270 1345 1765 1405 1540 2420 1810
Technical specifications|FMT4.1 -5
Excavator weight class t up to 40
Max. grab load bearing capacity t Grab: 8 / slewing gear: 25
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 18
|Use: Mobile and chain excavators
Special transfer and sorting grab for large and
bulky material such as found in quarries, scrap
sorting, garbage dumps and recycling facilities.
|Design features
• The shells are exchangeable within the entire
series
• 5 shells made entirely of high-strength fine-
grained steel (HB 450) , 3-shell and 4-shell
versions are available
• Shell tips of high-strength manganese steel
• Arm made entirely of high-strength fine-grained
steel (HB 450)
• Continuously rotatable hydraulic slewing gear
• Lifting cylinder with dampened end position
• flat, compact design - all hydraulic supply lines
run protected in the steel structure
• Hose protective plate for the hydraulic
connections on the slewing gear
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|MT3.6 -4
Excavator weight class: up to 30 t
Orange peel grab, 4-arm
MT3.6-600-4 600 1280 1410 2230 1850 1375 2300 1730 2070
MT3.6-800-4 800 1320 1510 2330 1900 1470 2500 1870 2250
Technical specifications|MT3.6 -4
Excavator weight class t up to 30
Max. grab load bearing capacity t Grab: 4 / slewing gear: 15
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. bulk density t/m³ 2.0
Max. speed RPM 18
|Use: Mobile and chain excavators
Special transfer and sorting grab for large and
bulky material such as found in quarries, scrap
sorting, garbage dumps and recycling facilities.
|Design features
• The shells are exchangeable within the
entire series
• 4 shells made entirely of high-strength fine-
grained steel (HB 450) , 3-shell and 5-shell
versions are available
• Sealed shell bearings
• The bottom boom section is entirely made of
fine-grain steel (HB 450)
• Continuously rotatable hydraulic slewing gear
• Lifting cylinder with dampened end position
• Piston rod protection
• Hose protective plate for the hydraulic
connections on the slewing gear
|Available accessories and equipment
• Hose set and mounting for all known
excavator manufacturers
• Ramming protection
• Lifting eyes
• Special shells according to customer
specifications
• Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|MT3.6 -5
Excavator weight class: up to 30 t
Orange peel grab, 5-arm
MT3.6-600-5 600 1430 1550 2230 1850 1375 2300 2100 2100
MT3.6-800-5 800 1460 1600 2330 1900 1465 2490 2275 2275
Technical specifications|MT3.6 -5
Excavator weight class t up to 30
Max. grab load bearing capacity t Grab: 4 / slewing gear: 15
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. bulk density t/m³ 2.0
Max. speed RPM 18
|Use: Mobile and chain excavators
Special transfer and sorting grab for large and
bulky material such as found in quarries, scrap
sorting, garbage dumps and recycling facilities.
|Design features
• The shells are exchangeable within the entire
series
• 5 shells made entirely of high-strength fine-
grained steel (HB 450) , 3-shell and 4-shell
versions are available
• Sealed shell bearings
• The bottom boom section is entirely made of
fine-grain steel (HB 450)
• Continuously rotatable hydraulic slewing gear
• Lifting cylinder with dampened end position
• Piston rod protection
• Hose protective plate for the hydraulic
connections on the slewing gear
|Available accessories and equipment
• Hose set and mounting for all known
excavator manufacturers
• Ramming protection
• Lifting eyes
• Special shells according to customer
specifications
• Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|MT4.6 -4
Excavator weight class: 55 t
Orange peel grab, 4-arm
MT4.6-600-4 600 2.0 1600 1790 2270 1820 1360 1500 2320 1755 2070
MT4.6-800-4 800 2.0 1685 1930 2405 1865 1540 1640 2600 1935 2280
Technical specifications|MT4.6-4
Excavator weight class t up to 55
Max. grab load bearing capacity t Grab: 8 / slewing gear: 15
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 18
|Use: Mobile and chain excavators
Special transfer and sorting grab for large and
bulky material such as found in quarries, scrap
sorting, garbage dumps and recycling facilities.
|Design features
• The shells are exchangeable within the entire
series
• 4 shells made entirely of high-strength fine-
grained steel (HB 450) , 3-shell and 5-shell
versions are available
• Sealed shell bearings
• The bottom boom section is entirely made of
fine-grain steel (HB 450)
• Continuously rotatable hydraulic slewing gear
• Lifting cylinder with dampened end position
• Piston rod protection
• Hose protective plate for the hydraulic
connections on the slewing gear
|Available accessories and equipment
• Hose set and mounting for all known
excavator manufacturers
• Ramming protection
• Lifting eyes
• Customized and special shells according to
customer specifications
• Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|MT4.6 -5
Excavator weight class: up to 55 t
Orange peel grab, 5-arm
MT4.6-600-5 600 2.0 1910 2035 2270 1820 1360 2320 2120 2180
MT4.6-800-5 800 2.0 1960 2140 2405 1865 1540 2600 2380 2420
MT4.6-1000-5 1000 0.8 2040 2290 2515 1900 1680 2800 2565 2635
Technical specifications|MT4.6 -5
Excavator weight class t up to 55
Max. grab load bearing capacity t Grab: 8 / slewing gear: 15
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 18
|Use: Mobile and chain excavators
Special transfer and sorting grab for large and
bulky material such as found in quarries, scrap
sorting, garbage dumps and recycling facilities.
|Design features
• The shells are exchangeable within
the entire series
• 5 shells made entirely of high-strength
fine-grained steel (HB 450) , 4-shell version
is available
• Sealed shell bearings
• The bottom boom section is entirely made
of fine-grain steel (HB 450)
• Continuously rotatable hydraulic slewing gear
• Lifting cylinder with dampened end position
• Piston rod protection
• Hose protective plate for the hydraulic
connections on the slewing gear
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|MT5.6 -4
Excavator weight class: 70 t
Orange peel grab, 4-arm
MT4.6-1250-5 1000 2.0 2345 2585 2610 2100 1670 1830 2850 2175 2520
MT5.6-1500-4 1500 2.0 2475 2830 2750 2150 1880 2120 3150 2385 2830
Technical specifications|MT5.6-4
Excavator weight class t up to 70
Max. grab load bearing capacity t Grab: 10 / slewing gear: 26
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 15
|Use: Mobile and chain excavators
Special transfer and sorting grab for large and
bulky material such as found in quarries, scrap
sorting, garbage dumps and recycling facilities.
|Design features
• The shells are exchangeable within the entire
series
• 4 shells made entirely of high-strength fine-
grained steel (HB 450) , 3-shell and 5-shell
versions are available
• Sealed shell bearings
• The bottom boom section is entirely made of
fine-grain steel (HB 450)
• Continuously rotatable hydraulic slewing gear
• Lifting cylinder with dampened end position
• Piston rod protection
• Hose protective plate for the hydraulic
connections on the slewing gear
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|MT5.6 -5
Excavator weight class: 70 t
Orange peel grab, 5-arm
MT5.6-800-5 800 2.0 2580 2740 2500 2065 1600 2850 2425 2485 2070
MT5.6-1000-5 1000 2.0 2710 2870 2610 2100 1670 3150 2620 2675 2280
Technical specifications|MT5.6-5
Excavator weight class t up to 70
Max. grab load bearing capacity t Grab: 10 / slewing gear: 26
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 15
|Use: Mobile and chain excavators
Special transfer and sorting grab for large and
bulky material such as found in quarries, scrap
sorting, garbage dumps and recycling facilities.
|Design features
• The shells are exchangeable within the entire
series
• 4 shells made entirely of high-strength fine-
grained steel (HB 450) , 3-shell and 5-shell
versions are available
• Sealed shell bearings
• The bottom boom section is entirely made of
fine-grain steel (HB 450)
• Continuously rotatable hydraulic slewing gear
• Lifting cylinder with dampened end position
• Piston rod protection
• Hose protective plate for the hydraulic
connections on the slewing gear
|Available accessories and equipment
• Hose set and mounting for all known
excavator manufacturers
• Ramming protection
• Lifting eyes
• Customized and special shells according to
customer specifications
• Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|MT6.6 -5
Excavator weight class: 100 t
Orange peel grab, 5-arm
MT6.6-3000-5 3000 2.0 4060 4475 3440 2580 2285 4100 3730 3810
MT6.6-3500-5 3500 2.0 4160 4665 3505 2600 2420 4220 3860 3960
Technical specifications|MT6.6-5
Excavator weight class t up to 100
Max. grab load bearing capacity t Grab: 15 / slewing gear: 35
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 10
|Use: Mobile and chain excavators
Special transfer and sorting grab for large and
bulky material such as found in quarries, scrap
sorting, garbage dumps and recycling facilities.
|Design features
• The shells are exchangeable within the entire
series
• 5 shells made entirely of high-strength fine-
grained steel (HB 450), 3-shell and 4-shell
versions are available
• Sealed shell bearings
• The bottom boom section is entirely made of
fine-grain steel (HB 450)
• Continuously rotatable hydraulic slewing gear
• Lifting cylinder with dampened end position
• Piston rod protection
• Hose protective plate for the hydraulic
connections on the slewing gear
|Available accessories and equipment
• Hose set and mounting for all known
excavator manufacturers
• Ramming protection
• Lifting eyes
• Customized and special shells according to
customer specifications
• Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|MT7.6 -6
Excavator weight class: 220 t
Orange peel grab, 6-arm
MT7.6-4000-6 4000 2.0 7450 7900 4010 3325 2850 4570 4020 4020
MT7.6-5000-6 5000 2.0 7575 8160 4100 3360 3050 4740 4180 4180
MT7.6-8000-6 8000 0.8 7865 8800 4370 3480 3400 5300 4660 4660
Technical specifications|MT7.6-6
Excavator weight class t up to 220
Max. grab load bearing capacity t Grab: 15 / slewing gear: 40
Max. operating pressure bar 350 (grab function) /
140 (turning function)
Max. speed RPM 8
|Use: Mobile and chain excavators
Special transfer and sorting grab for large and
bulky material such as found in quarries, scrap
sorting, garbage dumps and recycling facilities.
|Design features
• The shells are exchangeable within the entire
series
• 6 shells made entirely of high-strength
fine-grained steel (HB 450), 3, 4 and 5-shell
versions are available
• Sealed shell bearings
• The bottom boom section is entirely made of
fine-grain steel (HB 450)
• Continuously rotatable hydraulic slewing gear
• Lifting cylinder with dampened end position
• Piston rod protection
• Hose protective plate for the hydraulic
connections on the slewing gear
|Available accessories and equipment
• Hose set and mounting for all known
excavator manufacturers
• Ramming protection
• Lifting eyes
• Customized and special shells according to
customer specifications
• Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|MP05 -3
Excavator weight class: 1 - 15 t
Universal grab
B
A
D
E
C
Max. grip operating pressure bar 250 250 250 300 300
Max. slewing operating pressure bar 250 250 250 250 250
Note: When positioning the grab, sorting or scissor hydraulics are required. (1 circuit
for positioning the grab (bucket cylinder), 1 circuit for gripping, 1 circuit for slewing)
|Use: Mobile and chain excavators
Multi-use grab for a wide range of applications for
handling different materials such as stone-setting
tasks, sorting construction scrap, loading and
sorting recycling materials, earth excavation and
loading course bulk goods, loading bushes and
shrubs.
Fig.: MP0.5
|Design features
• Continuously rotatable hydraulic compact rotary
motor
• flat, compact design - Grip hydraulic lines and
synchronized control run protected in the arm
• MP2 and MP3 with end position dampening in the
lifting cylinder
• MP1, MP2 and MP3 with locking valve in the cylinders.
This prevents the grip from the opening unintentionally
• MP1, MP2 and MP3 with mechanical opening and
closing stops
• Side part, floor panel and base edges of the shells
made of high-strength fine-grain steel (HB 450)
• MP05 and MP1 with screw-on tooth/ MP2 and MP3
with ESCO bucket tooth
• Hanging grab available
|Available accessories and equipment
• Hose set, adapter plates and mounting for all known
excavator manufacturers
• 6/2-way valve without hydraulic circuit
• Special shells according to customer specifications
• Hanging grab available
Fig.: MP1.5 • Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|MP3.5 -6
Excavator weight class: 15 - 40 t
Universal grab
B
A
D
E
C
|Design features
• Hydraulic rotary unit with high-strength axial and
radial bearings with slewing ring and rotary drive
• flat, compact design - Grip hydraulic lines and
synchronized control run protected in the arm
• With end position dampening in the lifting
cylinder
• Locking valves on the cylinder prevent the grip
from unintentionally opening
• mechanical opening and closing stops
• Side part, floor panel and base edges of the shells
made of high-strength fine-grain steel (HB 450)
• With ESCO bucket tooth system
• Hanging grab available
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|ROCA
Excavator weight class: 15 - 46 t
Rock grab
|Design features
• Hydraulic rotary unit with high-strength axial
and radial bearings with slewing ring and
rotary drive
• Flat, compact design - Grip hydraulic lines
and synchronized control run protected in the
arm
• Complete shell made of high-strength fine-
grained steel (HB 450)
• Hard grip nubs prevent rocks from sliding out
• The bottom boom section is entirely made of
fine-grain steel (HB 450)
• Lifting cylinders with dampened end
position/locking valves on the cylinder
prevent the grip from unintentionally opening
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|DG05 -3
Excavator weight class: 1 - 15 t
Demolition and sorting grab
B
A
E
C
Max. grip operating pressure bar 250 250 300 300 300
Max. slewing operating pressure bar 250 250 250 250 250
Note: When positioning the grab, sorting or scissor hydraulics are required. (1 circuit
for positioning the grab (bucket cylinder), 1 circuit for gripping, 1 circuit for slewing)
|Use: Mobile and chain excavators
Multi-use grab for a wide range of applications for
handling different materials such as demolition,
sorting scrap, loading and sorting and recycled
materials.
Fig.: DG2
|Design features
• Continuously rotatable hydraulic
• compact rotary motor
• flat, compact design - Grip hydraulic lines and
synchronized control run protected in the arm
• DG2 and DG3 with lifting cylinder with
dampened end position
• DG1 to DG3 with locking valve in the cylinders. This
prevents the grip from the opening unintentionally
• DG1 to DG3 with mechanical opening
• and closing stops
• Shells made of high-strengthfine-grain
steel (HB 450)
• DG1 to DG3 with a bolted exchangeable cutting edge
is made of high-strength fine-grain steel (HB 450)
•
|Available accessories and equipment
• Hose set, adapter plates and mounting for all
known excavator manufacturers
• 6/2-way valve without hydraulic circuit
• Special shells according to customer
specifications
• Hanging grab available
Fig.: DG1.5 • Additional special equipment upon request
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Series|DG3.5 -6
Excavator weight class: 15 - 40 t
Demolition and sorting grab
Max. grip operating pressure bar 300 350 350 350 350
Max. slewing operating pressure bar 140 140 140 140 140
Note: When positioning the grab, sorting or scissor hydraulics are required. (1 circuit
for positioning the grab (bucket cylinder), 1 circuit for gripping, 1 circuit for slewing)
|Use: Mobile and chain excavators
Multi-use grab for a wide range of applications for
handling different materials such as demolition,
sorting scrap, loading and sorting and recycled
materials.
Fig.: DG3.5
|Design features
• Hydraulic rotary unit with high-strength axial and
radial bearings with slewing ring drive
• flat, compact design - Grip hydraulic lines and
synchronized control run protected in the arm
• With end position dampening in the lifting cylinder
• Locking valves on the cylinder prevent the grip
from unintentionally opening
• -Mechanical opening and closing stops
• Shells made of high-strength fine-grain steel (HB
450)
• Bolted exchangeable cutting edge made of high-
strength
• fine-grain steel (HB 450)
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Slewing gear|DWP-10
Technical specifications|DWP-10
Weight kg 25
max. axial load t 10
Max. operating pressure bar 350 (rotating union) /
140 (turning function)
Torque (100 bar) Nm 1665
Max. speed RPM 20
Connections Slewing: 12L / Gripping: 25S
tie 0
3,3 23,5
f
n
°
72
5x
n270 5xM10
6
18 tief
230
n 20
n 1 20
326
183
n304
302
30° 30°
15°
25S
12L
R19
7
R115
00
n2
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Slewing gear|DWP-15B
7 6 5 4 3
Technical specifications|DWP-15B
Weight kg 225
max. axial load t 15
Max. operating pressure bar 350 (rotating union) /
Werkstoff
140 (turning function)
Datum Technische Refe
Torque (100 bar) Nm 2565 24.03.2015 LKO
Max. speed RPM 20
HGT
Connections Slewing: 12L / Gripping: 25S
Hydraulikgreifer-Techno
GmbH
Also available as a dual motor version
7 6 5 4 3
3,1 9,90
f
ti e
n2
°
72
5x
18
5xM12
n340 18
20 tief
n 29
2
n1
40
391
252
n380
344
30°
n22-16 tief für Connexstift
30° 60
° 25S
R2
22
,5
12L
30°
R 15 0
15°
n2
55
30°
9xM16
30° 60°
30°
145
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Slewing gear|DWP-15-2
Technical specifications|DWP-15-2
Weight kg 255
max. axial load t 15
Max. operating pressure bar 350 (rotating union) /
140 (turning function)
Torque (100 bar) Nm 4100
Max. speed RPM 20
Connections Slewing: 12L / Gripping: 25S
29,90
3,1 tief
°
72
18
5x
18 5xM12
340
20 tief
2
92
140
8x 22 für Zylinderschraube M20
442
252
380
360
30°
30°
25S
60
°
12L
30°
2
55
30°
°
30° 60 9xM16
30°
145
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
Product Description
Slewing gear DWP-15
10/2015
The slewing gears DWP-15 and DWP15-2 were designed for use on hydraulic attachments for hydraulic
excavators as well as for mobile and stationary handling machines.
The DWP-15 / 15-2 perform three functions for operating the attachment:
The slewing gear is mounted as a complete unit, which allows the component to be quickly mounted and
dismounted. All three functional units work largely independently of each other. This makes it possible to replace
individual components easily and economically in the case of wear or damage, which can be done by personnel
with standard metalworker's knowledge. In addition, the structure of the DWP-15 protects the hydraulic system
of the carrier against oil contamination from possible bearing wear, unlike compact rotators.
DWP-15 DWP-15-2
(double motor)
- Connection rotation: 12 L
1
Product Description
Slewing gear DWP-15
10/2015
9 2 1
7 8
3 4
2
Product Description
Slewing gear DWP-15
10/2015
1 2
7 4
6 5
3
Product Description
Slewing gear DWP-15
10/2015
Bearing description:
For supporting and transferring radial and axial loads applied to the attachment, the DWP-15 is equipped with
load-bearing sliding bearings.
The flange sleeve (2) attached to the retaining ring (1) absorbs the axial tensile forces as well as the lateral
radial forces. The large thrust washer (3) absorbs the axially occurring pressure forces.
3 2
4
www.hgt-greifer.de
Slewing gear|DWP-26
Technical specifications|DWP-26
Weight kg 260
max. axial load t 26
Max. operating pressure bar 350 (rotating union) /
140 (turning function)
Torque (100 bar) Nm 3620
Max. speed RPM 15
Connections Slewing: 12L / Gripping: 25S
Also available as a dual motor version
5xM12
4 5° 20 tief
,9
29 ef
n 1 ti
3,
°
72
5x
n465
6
27
n4 2
0
n1
50
8x4
5°
450
229
n165
2
n465
415
40°
25S
4 0° 40
°
12L
4 0°
n300
0
R 23
0
R17
9xM24
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Slewing gear|DWP-26-2
Technical specifications|DWP-26-2
Weight kg 320
max. axial load t 26
Max. operating pressure bar 350 (rotating union) /
140 (turning function)
Torque (100 bar) Nm 7000
Max. speed RPM 15
Connections Slewing: 12L / Gripping: 25S
29,9
3,1 tief
5xM12
20 tief
5°
8x4
°
72
5x
27
4
20
50
1
450
229
165
424
40°
° 25S
40 40
°
40°
12L
3
00
9xM24
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120
www.hgt-greifer.de
Slewing gear|DWP-40
Technical specifications|DWP-40
Weight kg 805
max. axial load t 40
Max. operating pressure bar 350 (rotating union) /
140 (turning function)
Torque (100 bar) Nm 8440
Max. speed RPM 8
Connections Slewing: 20L / Gripping: 38S
6x 18 für Zylinderschraube M16
6x6
00
4
0°
55
30x12°
55
65
8 5xM12
20 tief
50,8
3,1 tief
60°
50
1
0
8
733
1150
200
790
20S 20S
38S
HGT Hydraulikgreifer-Technologie GmbH · Handorfer Weg 19 · D-31241 Ilsede · Telephone +49 (0)5172.41009-0 · Fax +49 (0)5172.41009-120