Beruflich Dokumente
Kultur Dokumente
EXAMPLE DESCRIPTION
The frame object moment and shear strength is tested in this example.
A simply supported beam is laterally restrained along its full length and is
subjected to a uniform factored load of 69 kN/m and a factored point load at the
mid-span of 136 kN. This example was tested using the BS 5950-2000 steel
frame design code. The moment and shear strengths are compared with
independent hand calculated results.
L=6.5 m
RESULTS COMPARISON
Percent
Output Parameter SAP2000 Independent Difference
CONCLUSION
The results show an exact comparison with the independent results.
HAND CALCULATION
Properties:
Material:
E = 205000 MPa
Ys = 275 MPa
ρ y = 1.0 • Ys = 275 MPa
Section: UB533x210x92
Ag = 11,700 mm2
D = 533.1 mm, b = 104.65 mm
t = 10.1 mm, T = 15.6 mm
d = D − 2t = 533.1 − 2 • 10.1 = 501.9 mm
Z33 = 2,072,031.5 mm3
S33 = 2,360,000 mm3
Loadings:
Paxial = 0
wu = (1.4wd + 1.6wl) = 1.4(15) + 1.6(30) = 69 kN/m
Pu = (1.4Pd + 1.6Pl) = 1.4(40) + 1.6(50) = 136 kN
wu l 2 Pu l 69 • 6.52 136 • 6.5
Mu = + = +
8 4 8 4
M u = 585.4 kN-m
wu l + Pu 69 • 6.5 + 136
=Fv =
2 2
Fv = 292.25 kN
Section Compactness:
P
=r1 = 0 (since there is no axial force)
dt ρ y
P
=r2 = 0 (since there is no axial force)
Ag ρ y
275 275
=ε = = 1
ρy 275
=
λ 6.71 < =
λ p 9 , No localized flange buckling
Flange is Class 1.
=λ 49.69 <=
λ p 80 , No localized web buckling
Web is Class 1.
Section is Class 1.
Pv 2 = 888.4 kN
M c = 649 kN-m