Beruflich Dokumente
Kultur Dokumente
: CON-MR-05 Rev A
METHOD STATEMENT
FOR
ERECTION OF STEEL STRUCTURE
Page 1 of 2
Ref. No.: 18/0186/SS/0001
Reference No. (Project Code /Type of Construction Work/Series No.)
Form No.: CON-MR-05 Rev A
METHOD STATEMENT
OF
ERECTION OF STRUCTURE ON ATTIC FLOOR
1. Work Description:
3. Work Execution:
Mobilize a lorry crane for erect steel structure.
2 workers will measure and mark the location of the anchoring point of bolt and nut
for the steel column base plate on the concrete.
After marking a hole will be drill on the concrete and place in the bolt.
2 worker will be assign to carry up the main external steel column to it vertical
position from below section and supported by external temporary cross bracing.
2 worker install full rafer on the ground.
After installation of rafter beam as per drawing lift up whole frame using lorry
carne on top of column.
2 worker will secure rafter beam with column using tag wel.
Check alignment of structure.
After 2 worker will full weld as per drawing meantion.
After welding complet 2 worker will clean welding area using power brush.
After power brush 2 will paint welding area.
Page 2 of 2
Ref. No.: 18/0186/SS/0001
Reference No. (Project Code /Type of Construction Work/Series No.)