Beruflich Dokumente
Kultur Dokumente
Open Workstation and go to File --> New --> Virtual Machine the next screen will show:
Choose Custom and click next. The following screen will show:
Make sure Workstation 6.5-7.x is selected and click Next. The following screen will show:
Choose "Installer disc image file (iso):" and browse to the downloaded ISO file and select it. Click Next
and the following screen will show:
Make sure VMware ESX --> ESX Server 4 and click Next. The following screen will show:
Provide a name and location for the Virtual Machine and click Next. The following screen will show:
Select the right processor configuration and click Next (Most of the time default is OK). The following
screen will show:
Select the amount of memory available for the Virtual Machine and click Next. The following screen
will show:
Choose the network connection you want to use and click Next. The following screen will show:
Select the I/O comtroller you want to use (in most cases the recommended) and click Next. The
following screen will show:
Select a Disk (Create a new virtual disk) and click Next. The following screen will show:
Select the Virtual disk type (SCSI) and click Next. The following screen will show:
Specify Disk Capacity and Click Next. The following screen will show:
Specify the Disk File and click Next. The following screen will show:
Check the Virtual Machine settings and click Finish. The following screen will show:
Click with the mouse in the VM Screen an press Enter. The following screen will show:
Press Enter to Install. The following screen will show:
Press F11 to Accept and Continue. The following screen will show:
Press Enter to Continue. The following screen will show:
Press Enter to Reboot. After Reboot the following screen will show:
Press Enter to configure a new Root Password. The following screen will show:
Put the new Password in twice, and press enter. The following screen will show:
Select Configure Management Network and press Enter. The following screen will show:
Input the right IP Address, Subnet Mask and Default Gateway and press Enter. Select DNS config and
press Enter the following screen will show:
Put in the right DNS Settings and press enter and then Esc. to exit the Configure Management
Network settings. The following screen will show:
Press Continue to this website (not recommended). The following screen will show:
Click Download the vSphere Client and install the client. After install the following screen will show:
Put in the settings just set for the ESXi server and Login. The following screen will show:
Check the Install this certificate... box and press Ignore. The following screen will show:
Congratulations your done installing ESXi.