Beruflich Dokumente
Kultur Dokumente
Engine Performance
By Anish | In: Marine Electrical | Last Updated on October 9, 2017
FacebookTweetPinLinkedInEmail
Marine engine on ships are used for 2 main purposes – for propelling the ship and for
generating electricity, which assists in powering the ship’s propulsion plant.
The efficiency of any machinery on board ship is directly related to its performance. In
order to get the best out of marine engines, it is very important to monitor their
performances and take measures to achieve an efficient combustion.
Ensuring this will not only reduce generation of pollution from engines but also the
overall operating cost of the ship.
Credits:
Jürgen Burg/YouTube
Following are ways to monitor and measure the performance of the engine:
1. Measure the Peak Pressure by Mechanical Peak Pressure Gauge: This method is
normally applied in 4 stroke generator engine where a peak pressure gauge is used for
individual cylinder and pressure generated during combustion is noted. With the same
gauge, the compression pressure of the cylinder is also measured when the unit is not
firing. The variation in the peak pressures generated is then taken into account for
drawing out faulty units, adjusting fuel racks and overhauling combustion chamber parts
in order to achieve efficient combustion.
5. Monitoring of Engine Control Parameters: The engine control parameters like fuel
injection timing, exhaust valve timing, variable turbocharger vane opening angles,
lambda control etc. are monitored and any variation is set to achieve the best possible
efficient combustion.
6. Engine Parameters: The engine parameters are the best source for finding out any
fault or variation in the engine performance. Variation in temperature, pressure and
power produced by each cylinder must be frequently monitored and adjustment must be
done accordingly to achieve efficient combustion.
7. Log Book Monitoring: This is the most basic but commonly ignored method for
monitoring engine performance. The log book record for engine room machinery is kept
onboard for years on ship. The log book of current month and of previous months must
be compared for recorded parameters, which will give the exact variation of
engine parameters. If the variation figure is more, engine controls, parameters and parts
to be adjusted/ overhauled.
8. Engine Emission: The marine engine releases exhaust smoke as waste product
after the combustion. The color and nature of the exhaust should be monitored
continuously and engineers must know which exhaust trunk discharge is dedicated for
which engine. The change in exhaust smoke is a prominent indication of problem in the
combustion chamber.
Do you know any other important method to monitor and measure marine engine
performance? Let us know in the comments below.
Marine Insight’s Marine Engine eBooks