Beruflich Dokumente
Kultur Dokumente
Addresses
How can I configure DNS on a DC with two IP addresses?
One option is to leave the DNS server properties for the adapter empty.
Alternatively, if that’s not an option, following these instructions.
Now that I have stopped the unwanted address from registering itself with
DNS, I’ll configure the DNS server running on the DC to listen exclusively on
the 172.16.0.6 address.
Open a command prompt with domain administrative privileges from the Start
menu.
Type ipconfig /flushdns and press Enter. This command will clear any
cached DNS requests in the local DNS client.
Now type ipconfig /registerdns and press Enter to register the local NICs
with DNS. Only one NIC and IP address should register.
Type dcdiag /fix and press Enter to make sure DNS for AD is functioning
correctly with this domain controller.
Now ping your AD’s DNS domain name and you should get a reply on the
desired IP address.
Don’t forget that you will likely need to reboot clients and member servers to
make sure that they use the updated DNS configuration and don’t resolve to
the wrong address.