Beruflich Dokumente
Kultur Dokumente
MODIFIED BG LOADING-1987
BROAD GAUGE-1676 mm
Equivalent Uniformly Distributed Loads (EUDL) in kilo Newtons (tonnes) on
each track, and Coefficient of Dynamic Augment (CDA).
For Bending Moment, L is equal to the end of the span equal to the maximum SF
effective span in metres. For Shear, L is the developed under the standard loads at that
loaded length in metres to give the section.
maximum Shear in the member under NOTE:
consideration.
(1) Cross girders – The live load on a
The Equivalent Uniformly Distributed Load cross girder will be equal to half the
(EUDL) for Bending Moment (BM), for spans total load for bending in a length L,
upto 10m, is that uniformly distributed load equal to twice the distance over
which produces the BM at the centre of the centres of cross girders.
span equal to the absolute maximum BM
(2) L for Coefficient of Dynamic Augment
developed under the standard loads. For
(CDA) shall be as laid down in clause
spans above 10m, the EUDL for BM, is that
2.4.1
uniformly distributed load which produces
the BM at one-sixth of the span equal to the (3) When loaded length lies between the
BM developed at that section under the values given in the table, the EUDL for
standard loads. Bending Moment and Shear can be
interpolated.
EUDL for Shear Force (SF) is that uniformly
distributed load which produces SF at the
Impact Factor
L Total load for Bending
Total load for Shear Force CDA=
(m) Moment
0.15+8/(6+L)
kN t kN t
1 2 3 4 5 6
1.0 490 50.0 490 50.0 1.000
1.5 490 50.0 490 50.0 1.000
2.0 490 50.0 519 52.9 1.000
2.5 490 50.0 598 61.0 1.000
3.0 490 50.0 662 67.5 1.000
21
APPENDIX II (Contd…)
1 2 3 4 5 6
9.5 1070 109.1 1315 134.1 .666
10.0 1101 112.3 1377 140.4 .650
11.0 1282 130.7 1492 152.2 .621
22
APPENDIX II (Contd…)
1 2 3 4 5 6
85.0 6986 712.4 7470 761.8 .238
90.0 7391 753.7 7876 803.1 .233
95.0 7796 795.0 8281 844.4 .229
100.0 8201 836.2 8686 885.7 .225
105.0 8606 877.7 9091 927.0 .222
23
APPENDIX-XVII
BROAD GAUGE-1676 mm (5‟ 6”)
For Bending Moment, L is equal to the NOTE: Cross girders – The live load on a cross
effective span in metres. For Shear Force, L girder will be equal to half the total load
is the loaded length in metres to give the for bending in a length L, equal to twice
maximum Shear in the member under the distance over centres of cross
consideration. girders, increased by the impact factor
for the length L, as defined above.
Total load (tonnes) for Bending
Total load (tonnes) for Shear Impact Factor
L Moment
CDA=
(m) ML standard of BL standard ML standard of BL standard
20/(14+L)
1926 of 1926 1926 of 1926
1 2 3 4 5 6
1.0 45.8 34.6 45.8 34.6 1.000
1.5 45.8 34.6 45.8 34.6 1.000
2.0 45.8 34.6 52.4 39.6 1.000
2.5 45.8 34.6 60.4 45.5 1.000
3.0 46.9 35.4 65.5 49.5 1.000
67
APPENDIX-XVII (Contd…)
1 2 5 4 5 6
12.0 140.9 108.4 155.7 119.1 0.769
13.0 147.2 113.4 163.7 125.4 0.741
14.0 152.7 117.2 172.0 131.6 0.714
15.0 160.6 123.2 180.6 138.2 0.691
16.0 168.8 130.2 188.1 144.8 0.667
68
APPENDIX-XVII (Contd…)
1 2 5 4 5 6
85.0 703.5 539.0 750.4 570.8 0.202
90.0 742.0 568.0 789.8 597.8 0.192
95.0 780.0 591.6 827.8 624.6 0.183
100.0 820.0 616.0 868.6 651.2 0.175
105.0 858.0 642.5 906.2 677.2 0.168
69