Beruflich Dokumente
Kultur Dokumente
Workshop Technology
3. In lathe machine
a. job is stationary and tool rotate c. both job and tool rotate
b. tool is stationary and job rotate d. both a and b
5. Tail stock
a. is situated at right hand end of the bed
b. Supports the work when turning on centre.
c. is used for holding and feeding the tools such as drills, reamers, tap etc.
d. all of the above
7. The tool used to make the threads inside the drilled hole is called
a. Reamer c. Tap
b. Die d. None of the above
10. The process of reducing diameter of the work piece in lathe operations is called
a. Facing c. Turning
b. Spinning d. Rolling
13. The property of material to be flattened into thin sheets without cracking by cold or hot
working is called
a. Ductility c. Malleability
b. Resilience d. Toughness
14. Maximum stress that a material can withstand before destruction is called
a. Breaking strength
b. Ultimate strength
c. Yield strength
d. Tensile strength
17. In the following type of welding process heat is produced for welding by chemical
reaction:
a. Resistance Welding c. Thermit welding
b. Forge Welding d. Gas welding