Beruflich Dokumente
Kultur Dokumente
Eng Br. Inj Pr. Lubrication Cooling Engine Timing Air Charging R Color Code for Schematic line
Fuel Filter schematic lines description
VW 24V Vehicle Build Event
Mangmt Mangmt System System System System
EFP BCP ICP EOT EOP ECT CKP CMP EBP MAT MAP
Red
Purple
24 Volts (VBatt)
48 Volts (Vinj )
ENGINE HARNESS P/N 1846133
No IMPORTANT NOTES:
Blue
Green
5 Volts (VREF)
Signal Circuit
INJECTOR HARNESS P/N 1846154
NOTE:
Connection y This drawing is for reference only.
y This drawing does NOT necessarily All Connector views are
Dotted Green
Brown
Frequency or switch function
Data Communication Link
24Vdc IDM P/N 1846431
Stow on
Engine
convey accurate vehicle side information. looking into the Black Circuit Ground
24Vdc ECM P/N1846577
Vehicle data should be collected from VW. harness side connector
y Determining accuracy is the responsibility
of the user of this drawing.
16 X3-10
97VG
1
1 2
X3-30 X3-16 SRC
+5Vdc (Hall) 12 CRANK (START)
N/C
7 Mot V 7 4 3 21 OFF
Connector X3-7 X3-12 CANH Batt
8 Mot U 6 Cover Connection X3-27 X3-13 CAN Bus ACCESORY
IPR CANL
Stow on X3-8 X3-9 EFAN SP 1 A1 NOTE:
Mitsubishi Brake X3-4, 23 Design Protect for
Mitsubishi Engine X3-22 EFAN SP 2 A2 NOTE:
EGR Valve Solenoid SREA X3-24, 25 dual speed fan
EGR Valve KL.15 is high when
Controller Eng Br Inj Pr Turbo Optional X3-22,26
X3-1,2,3
X3-8 DDS +24V NOTE: switch is on Accesory, In-Cab Switch Detail
Control Control Control MAIH X3-28
X3-10 PBA
RAS
3 4
Gnd
+24V
"C" Sample PBA Run or Crank Applies to: PBA
Revison C: 06/03/2004
¾ Corrected Diagnostics Connector drawing
¾ Bolded and put in RED wires that are different from Zero (+) samples
to B-Sample modules for ease of updating the vehicle wiring harnesses
Revison D: 07/20/2004
¾ Added possible two speed fan clutch wires for discussion purposes
¾ Added note on C-Sample change on PBA to +24V input
¾ Corrected pin out of Hella Pedal
¾ Added views of chassis side connectors
¾ Added pin numbers on switchs on chassis side
Revison E: 07/22/2004
¾ Added CAN calibration and monitor connector. (Required for
calibration and EMI test monitoring.)
¾ Added detail to starter to be more accurate
Revison F: 08/02/2004
¾ Added Transmission Neutral Switch (ZF) on low side of the starter
relay.
Revison G: 09/09/2004
¾ Changed part numbers of wire harnesses to reflect latest I313
changes
Revison H: 10/04/2004
¾ Reversed the ATA (+) and ATA (-) pins on the ECM
PROGRAM NAME
International Truck and Engine
I6 Volkswagan (24V) Confidential and Proprietary - Departmental Use Only
Approvals Date TITLE
DRAWN A. Merrick 3/4/2004 I6 for Volkswagan Titan Truck Application
CHECKED System Schematic (24V B-Sample Modules)
ENGR A. Merrick 3/4/2004 SIZE DRAWING NO. REV.
DESIGN ACTIVITY B 545-20462 H
SCALE DATE SHEET
PRODUCT GRP.
10/042004 2 of 2