Beruflich Dokumente
Kultur Dokumente
Approved By Approved By
Rev. Date Description Prepared By Reviewed By
(Alderly FZE) (CLIENT)
CONTENTS
1. INTRODUCTION / SCOPE.......................................................................... 4
2. REFERENCES ............................................................................................ 4
3. ATTACHMENTS.......................................................................................... 4
ATTACHMENT 1 RT PROCEDURE (INS/LME-576/ASME/B31.3/RT/001 REV 00) ..5
1. INTRODUCTION / SCOPE
This Procedure describes the general requirements for radiography examination (RT)
according to related approved weld map for process piping Butt weld Joints. This
Procedure is only applicable for pre-fabricated piping spools by Links Middle East
Technical Services LLC (hereafter LME) at our ICAD III Facility, Abu Dhabi.
This radiographic testing procedure provides the material, equipment, calibration,
personnel qualification, examination process, evaluation, records and acceptance
standards for Flow Met which will be fabricated in LME.
LME shall be appointing M/s Intertek INSPEC as a NDE sub-Contractor for RT.
2. REFERENCES
Reference shall be made to following documents:
3. ATTACHMENTS
Attachment 1: RT Procedure (INS/LME-576/ASME/B31.3/RT/001 Rev 00) B
Attachment 1