Sie sind auf Seite 1von 12

Leica GPS1200+ Series

High performance
GNSS System
Best GNSS and Fully waterproof,
Leica GPS1200+ RTK technology incredibly robust
Fast satellite acquisition, GPS1200+ receivers are
The only high accuracy measure-
ments, tracking to low ele-
designed to work anywhere
under the roughest

future proof GNSS vations, the world’s first


phase multipath mitigation
conditions imaginable.
They float, withstand
technology, jamming resist- falls, jolts and vibrations,
ant, high up-date rate, low operate in rain, dust, sand
When it says future proof GNSS, it means maximum productiv- latency, and fast, reliable, and snow, at temperatures
ity and reliability. More satellites, more GNSS signals. Today and long-range RTK. from –40°C to + 65°C.
tomorrow! With Leica GPS1200+ you can be certain that you’re
ready for the future. Invest today in future proof GNSS tech- GNSS/TPS: Totally versatile
nology and be sure that your equipment can track all satellites standardized interface GPS1200+ can be used as
today and tomorrow. GPS1200+ is the only future proof GNSS Keyboard and touch a reference or rover in any
System. screen, intuitive interface, mode from static to RTK.
powerful data manage- Small, light, and supporting
ment, on-board routines all formats and communi-
and programs: all easy to cation devices, it can be
use and identical for GNSS used on a pole, in a mini-
and TPS. pack, on a tripod, or even
on a construction machine,
SmartRover – survey boat or aircraft.
extremely light weight
SmartRover weighs just For all applications
2.7 kg for a complete You can use GPS1200+ for
cable free all on the pole everything: control, topo,
RTK GNSS rover. Work the engineering, cadastre,
complete day in comfort stake out, monitoring,
and enjoy full compatibility seismic – whatever you
with SmartStation and want.
SmartPole.

Combine GNSS and TPS. Use them in the same way.


Change easily from one to the other.
FUNCTION Work faster, more accurately and more efficiently.
Enjoy all the freedom, flexibility and power of System 1200.
integrated
Leica SmartStation Leica GPS1200+

TPS1200+ with integrated Unites top GNSS technology


GNSS. All TPS1200+ can be with powerful data
ugraded to Smart Station. management. Perfect for
all GNSS applications.
Leica System 1200

GNSS and TPS


Working together
For all applications
Today and in the future

Designed and built to The new high-tech GNSS


the most stringent and TPS instrument of the
standards with the latest System 1200 series with
measurement technologies, identical operation enable
Leica System 1200 you to do every type of
instruments are extremely job, faster, more accurately
efficient and reliable, and and more efficiently than
stand up to the severest ever before.
environments.
And most important, you
A highly intuitive reduce your costs and
user interface, a multitude increase your profits.
of functions and features,
powerful data management,
and user-programming
capabilities are common
to both System 1200 GNSS
and TPS instruments.

Operators can switch


instantly between GNSS and
TPS and use whichever is
the most convenient and
suitable; extra training is
not required.

Leica TPS1200+ Leica SmartPole Leica SmartWorx Leica Geo Office

Top performance, high Save time with SmartPoles’ SmartWorx TPS/GNSS Everything you need in a
accuracy total stations setup On-the-fly and application software is single package for TPS and
do everything you want easily swap between GNSS both easy-to-use and GNSS: import, visualization,
and much more. and TPS when needed. extremely powerful. conversions, quality control,
processing, adjustment,
reporting, export etc.
GPS L5
GALILEO
GALILEO
GLONASS
GLONASS

Leica GPS1200+
GPS

GPS

Fast, accurate, GPS L5

rugged and reliable

GNSS technology SmartCheck+ SmartRTK


GPS1200+ means newest Continuously checking pro- With Leica Geosystems
GNSS technology. The third vides the highest possible SmartRTK and RTCM 3.1
generation of SmartTrack+ reliability. A unique, built-in correction data, performance
measurement engine tracks integrity monitoring system and peace-of-mind is guaran-
all existing satellite signals checks all results immediately. teed. Never again you will
and those planned for the SmartCheck+ processes all need to worry about loosing
future. This includes GPS available GNSS measurements consistency and traceability
L5, Galileo, GAGAN, WAAS, simultaneously for centimeter- because of a moving virtually
EGNOS, MSAS and accuracy, 20 Hz RTK at 40 km computed reference station.
Compass signals. More and more. Initialize within SmartRTK uses fixed refer-
satellites means higher seconds and survey in ence station monuments that
productivity, accuracy and obstructed areas with a surveyors can trust. SmartRTK
reliability. SmartTrack+ GX1230+ (GPS only) sensor does not only give benefits
acquires satellites within or increase productivity with a with RTCM 3.1, the new
seconds and is ideal in GX1230+ GNSS/ATX1230+ atmospheric decorrelator
urban canyons and GNSS (support all available technology provides precise
obstructed areas where GNSS systems). positioning in all Networks
other receivers often fail. regardless of the correction
Uniquely, older GPS1200 data.
receivers can be upgraded
with the new SmartTrack+
measurement engine.

High contrast RTK/DGPS communication


touch screen Radio modems, GSM, GPRS
The high quality 1/4 VGA and CDMA modules fit
(11 lines by 32 characters) in waterproof housings
with optional colour option attached to the receiver.
(RX1250) touch screen Attach either one or
guarantees perfect clarity two devices for RTK/DGPS
and contrast. Whether in reference and rover
Exceptionally rugged Immune to bad weather fading light or bright sun- applications.
Don’t worry about how your Designed for temperatures shine, you can always read
crews handle GPS1200+. from –40° C to +65° C the display perfectly. Oper- With Bluetooth® Wireless-
It’s built to MIL specs to (storage +80° C), GPS1200+ ate using the touch screen Technology built in to the
withstand the roughest shrugs off arctic cold and or the QWERTY keyboard, RX1250 controller com-
use. With its strong, preci- blistering heat. which-ever you prefer. plete cable free operation
sion-machined magnesium Fully waterproof – withstands and connectivity to com-
housing, GPS1200+ stands immersion to 1 m – sand and With or without patible wireless products
up to drops and falls and dustproof, it operates controller is available.
the jolts and vibrations of perfectly in any conditions Connect the controller to
machines. from tropical rainfall to the receiver when you
desert sandstorms. need to input information
GPS1200+ just keeps on and make full use of the
working. on-board functions and
programs.
28
Number of Satellites

26

24

22

20
GPS + GLONASS + Galileo
18

16

14
GPS + GLONASS
12

10

8
GPS only
6

0
0:00 2:00 4:00 6:00 8:00 10:00 12:00 14:00 16:00 18:00 20:00 22:00 0:00
Time

GNSS Modernization GPS1200+ receivers: SmartStation with  Light, modular


When is the right time to GX1230+ GNSS/ ATX1230+ SmartAntenna equipment
invest in a new hybrid GNSS GNSS SmartStation is a TPS1200+ Use it the way that
receiver? The answer is when  Triple frequency with a ATX1230+ GNSS suits you best.
the investment brings signifi-  GPS/ GLONASS/ Galileo/ SmartAntenna. All GNSS  All on the pole
cant productivity gains. Compass1 and TPS operations are Light weight with excellent
GLONASS has already proven  120 Channels controlled from the TPS balance. Ideal for stakeout
such gains. GPS L5 and  L1/L2/L5 GPS keyboard, all data are in on construction sites and
Galileo will bring even more  L1/L2 GLONASS the same database, all other demanding condi-
advantages, such as allowing  E1/ E5a/ E5b /Alt-BOC Galileo information is shown on tions.
instantaneous ambiguity  4 SBAS the TPS screen. Touch the  Pole and minipack
resolution and longer baseline  Full Real Time RTK GPS key, let RTK deter- Minimum weight in your
ranges. An investment in  Use as rover or reference mine the position to cen- hand when surveying
GPS1200+ effectively increases GX1230+/ GX1220+ timeter accuracy, then for hours on end.
the value of your equipment -  Dual frequency, GPS survey and stake out with  On a tripod or pillar
a receiver guaranteed to track only geodetic receiver the total station. You can For geodetic control
all satellite signals of today  Easily upgradeable do anything with Smart- and reference stations.
and tomorrow will remain to GNSS receiver Station. You can also use  All in the minipack
competitive well into the  16 L1 + 16 L2 GPS SmartAntenna indepen- For 30 cm DGPS, GIS
future.  4 SBAS dently on a pole with a and seismic surveys.
 Real-Time RTK (or DGPS option) RX1250 controller.
 GPS L5 and Galileo ready

Seamless dataflow

Keyboard illumination CompactFlash cards


Switch on the display and Same CompactFlash cards
keyboard illumination when for GNSS and TPS.
working at night. All the
keys light up. Choice of RTK pole Plug-in Li-lon batteries
Carbon fiber or aluminum For reliable, long-lasting
Use GPS1200+ for pole with adjustable, power, GPS1200+ uses
everything ergonomic handgrip. the best, high-capacity
 For RTK, DGPS, and static batteries available. Work
data logging Leica Geo Office for up to 17 hours with
 As a rover or reference Software support package just two plug-in, Lithium-
 On a pole, tripod, pillar, for GNSS and TPS with ion batteries.
or in a minipack tools and components for
 On construction import, visualization, con- TPS1200+ Total Stations
machines, survey boats, versions, quality control, GNSS and TPS use the
or planes processing, adjustment, same CompactFlash cards,
 For every type of reporting, export etc. formats and data manage-
application ment. Transfer cards from
one to the other and
1
The Compass signal is not finalized, although, test signals have been tracked with continue working in the
GPS1200+ receivers in a test environment. As changes in the signal structure may still same way.
occur, Leica Geosystems cannot guarantee full Compass compatibility.
Leica GPS1200+
Extremely powerful
Yet very easy to use
GPS1200+ is loaded with a multitude of features and
functions to meet the many different needs of users all
over the world, yet it is remarkably easy to use.

GPS1200+’s graphical Even better, you’ll notice


operating concept is self- that GPS1200+ and TPS1200+
explanatory and guides are fully compatible with the
you straight to what you same CompactFlash cards,
need. data management, displays
and keyboards.
You can use the default
settings or, if you prefer, Depending on the jobs you
you can set GPS1200+ to do, you can switch easily
operate, display and out- from GNSS to TPS and
put data in exactly the continue working in
way you require. exactly the same way.

When you use GPS1200+, Operate GPS1200+ using the


you’ll find that everything QWERTY keyboard or the large
is very easy to understand. graphic touch screen, whichever
you prefer.

Graphic view mode Coding and plan Data export in


of your work any format

Graphic views show your Define points, lines and Data can be exported
work. Zoom in for details areas to build up a plan in directly from GPS1200+
and out for the entire the display as you survey. or via Leica Geo Office in
survey. Use the touch You see immediately what various standard formats
screen or keyboard to you’ve done. Attach the or in your own userdefined
access data related to codes, attributes and formats for direct input
points and objects. information needed for into any type of processing,
input into your office or office, CAD or mapping
With graphical views you mapping software. software.
can check quickly in the
field for completeness System 1200 has all System 1200 interfaces
and correctness. types of tools and is easily to third-party
incredibly versatile. software packages.
Status icons Configurable user menu Program menu Touch screen
Indicate the current Set up your own user menu Direct access to all loaded The controller’s touch
measurement and opera- for the way you and your application programs screen provides immediate
tion modes, recording and crews operate. Show what such as survey, stakeout, access without using the
battery status, instrument you need and hide the rest. COGO etc. and optional keyboard. You can view
settings etc. application programs. data and information
QWERTY keyboard related to points and
Definable function keys The standard QWERTY Large graphic display objects and call up all
Allocate commands, layout of the controller key- 1/4 VGA high-resolution types of functions directly
functions, displays etc. to board facilitates fast, easy LCD with optional colour via the screen. Use the
these keys for immediate input of alphanumeric display (RX1250), easy to touch screen and/or the
access. data and information. read in any light. Display keyboard whichever you
and keyboard light up for prefer.
work in the dark.

User definable displays Data management Application programs

With GPS1200+ you can The powerful database GPS1200+ is supplied with
define different display manages data, files, jobs, many useful programs
masks so that the quality checks etc. You can such as Survey, Stakeout,
system shows exactly view, edit, delete, and COGO. Other programs
what you and your crews search with or without such as RoadRunner,
want to see when filters. Coordinates of Reference Line and DTM
surveying in the field. points measured more Stakeout are optional.
Set the displays according than once are averaged You can also write your
to the jobs you do and provided that they lie own programs for special
the information required. within specified tolerances. applications in Geo C++.

GPS1200+ adapts Surveying is much easier Most programs run on


perfectly to your needs. and more reliable with both GNSS and TPS.
System 1200.
Leica GPS1200+
Superb measurement
and RTK performance
SmartTrack+ SmartCheck Reference stations

World leading GNSS Fast, self-checking GPS1200+ at CORS sites


technology +40km RTK
Low noise, reliable, high The SmartCheck+ algo- Organizations in many
accuracy code and phase rithms process all available countries are establishing
measurements are the signals and deliver fast, GNSS reference stations.
basis of all satellite survey- accurate RTK. GPS1200+ with a
ing work. The better the Centimeter accuracy SmartTrack+ antenna or
raw data and the more positions are available IGS/Dorne & Margolin chok-
satellites being tracked, the continuously at rates of ering antenna is ideal for a
better the performance and up to 20 Hz. Integrity Continuously Operating
the results. GPS1200+’s monitoring runs in the Reference Station (CORS).
completely new background resolving the It logs data, streams data,
SmartTrack+ measurement ambiguities and verifying outputs RTK and DGPS for
engine and triple frequency the coordinates. Reliability transmission to RTK and GIS
antenna are matched with is phenomenal – 99.99% rovers, and is perfect for use
120 channels perfectly to for baselines up to 40 km with GNSS SPIDER, Leica’s
each other for the best – and the range is reference station software.
possible receiver outstanding.
performance: As GPS1200+ accepts all
Whatever the work, formats (Leica, CMR, RTCM)
 Acquisition within whether the receiver is on and outputs all standard
seconds a pole or vehicle, you’ll messages (NMEA),
 Excellent signal strength find GPS1200+ RTK to be GPS1200+ RTK rovers work
 Tracking to low the perfect tool: perfectly with all reference
elevations station services all over the
 Suppresses phase and  Initializes within world.
code multipath seconds
 Jamming resistant  Measures amongst trees  With single
 Top quality GNSS and obstructions reference stations
measurements  Position updates every  With networks of stations
 Perfect tracking in 0.05 second (20 Hz)  With MAX and i-MAX
dynamic environments  Latency less than  With area corrections
 Totally reliable 0.03 second (FKP) and virtual
 Consistent cm-accuracy reference stations (VRS)
 Total reliability
Everything you need
for all applications
SmartRover SmartStation SmartPole

SmartRover – GNSS & TPS perfectly Instantly switch


extremely light weight combined between GNSS & TPS
SmartRover weighs just TPS1200+ total station Every survey site is different.
2.7 kg for a complete with GNSS SmartAntenna Some sites are best suited
cable free all on the pole combined in one easy-to-use to TPS and others to GNSS.
RTK GNSS rover. Work the instrument. Ideal for With SmartPole both TPS
complete day in comfort measuring to points that and GNSS are available
and enjoy full compatibility cannot be occupied by an simultaneously. When GNSS
with SmartStation and RTK rover. Eliminates need is restricted by overhead
SmartPole. for control points, traverses obstructions use TPS; when
and resections when using a no TPS line-of-sight is avail-
SmartRover is fully com- total station. Set up Smart- able use GNSS. No longer
patible with SmartStation Station and let RTK fix the is it necessary to identify
and SmartPole through position to centimeter control points in the office
the interchangeable accuracy, then survey and and search for control in the
SmartAntenna. Using stake out with the TPS. Once field.
Bluetooth® Wireless- SmartStation is positioned,
Technology, the new light use the SmartAntenna on a SmartPole is fully compatible
weight RX1250 colour dis- pole with controller and with System 1200. The
play controller communi- sensor as an RTK rover. same light-weight GNSS
cates with the Smart- SmartAntenna can be used
Antenna to provide RTK  Use TPS and GNSS together with a TPS1200+
positioning to centimeter together as a SmartStation, together
accuracy. SmartRover  Fix the position with RTK, with a RX1250 controller as
delivers many benefits: then survey with TPS a SmartRover or together
 Survey easier and faster with the unique light-weight
 Weighs just 2.7 kg  Do any type of job 360° reflector and RX1250
 Interchange  Increase productivity controller as a SmartPole.
SmartAntenna between and profits
SmartStation, SmartPole  Higher accuracy &
and SmartRover consistency of GNSS control
 Cable free all on the  Save time in planning and
pole set-up is ideal executing the survey
for construction applica-  Maximum flexibility and
tions hence productivity
Leica GPS1200+
Technical specifications
and system features

GPS1200+ receivers GX1230+ GNSS/ ATX1230+ GNSS GX1220+ GNSS GX1230+ GX1220+ GX1210+
GNSS technology SmartTrack+ SmartTrack+ SmartTrack SmartTrack SmartTrack
Type Triple frequency Triple frequency Dual frequency Dual frequency Single frequency
Channels 120 channels 120 channels
L1/L2/L5 GPS L1/L2/L5 GPS 16 L1 + 16 L2 GPS 16 L1 + 16 L2 GPS 16 L1 GPS
L1/L2 GLONASS L1/L2 GLONASS 4 SBAS 4 SBAS 4 SBAS
E1/E5a/ E5b/ Alt-BOC Galileo E1/E5a/ E5b/ Alt-BOC Galileo (with DGPS option) (with DGPS option)
Compass1 Compass1
4 SBAS 4 SBAS
(with DGPS option)
Upgrade to
GX1230+ GNSS - Yes Yes Yes Yes
RTK SmartCheck+ No SmartCheck No No
Status indicators 3 LED indicators for GX1200+: power, tracking, memory

GPS1200+ receivers GX1230+ (GNSS)/ GX1220+ (GNSS) GX1210+ ATX1230+ GNSS


Ports 1 power port, 3 serial ports, 1 controller port, 1 antenna port 1 power/controller port,
Bluetooth® Wireless-Technology port
Supply voltage, Nominal 12 VDC Nominal 12 VDC
Consumption 4.6 W receiver + controller + antenna 1.8 W
Event input and PPS Optional: Optional:
1 PPS output port 1 PPS output port
2 event input ports 2 event input ports
Standard antenna SmartTrack+ AX1203+ GNSS SmartTrack AX1201 SmartTrack+ ATX1230+ GNSS
Built-in groundplane Built-in groundplane Built-in groundplane Built-in groundplane

The following apply to all receivers except where stated.


Power supply Two Li-Ion 4.4 Ah/7.4 V plug into receiver. One Li-Ion Temperature Operation: Receiver –40° C to +65° C
2.2 Ah/7.4 V plugs into ATX1230+ GNSS and RX1250. ISO9022 Antennas –40° C to +70° C
Plug-in Li-Ion batteries Power receiver + controller + SmartTrack antenna MIL-STD-810F Controllers –30° C to +65° C
Same for GNSS and TPS for about 17 hours (for data logging). Controller RX1250c –30° C to +50° C
Power receiver + controller + SmartTrack Storage: Receiver –40° C to +80° C
antenna + low power radio modem or phone for Antennas –55° C to +85° C
about 11 hours (for RTK/DGPS). Controllers –40° C to +80° C
Power SmartAntenna + RX1250 controller for Controller RX1250c –40° C to +80° C
about 6 hours (for RTK/DGPS) Humidity Receiver, antennas and controllers
External power External power input 10.5 V to 28 V. ISO9022, MIL-STD-810F Up to 100 % humidity.
Weights Receiver 1.20 kg. Controller 0.48 kg (RX1210) and Protection against Receiver, antennas and controllers:
0.75 kg (RX1250). SmartTrack antenna 0.44 kg. water, dust and sand Waterpoof to 1 m temporary submersion.
SmartAntenna 1.12 kg. Plug-in Li-Ion battery IP67, MIL-STD-810F Dust tight
0.11 kg (2.2 Ah) and 0.2 kg (4.4 Ah) Shock/drop onto Receiver: withstands 1 m drop onto hard surface.
Carbon fiber pole with SmartTrack antenna hard surface Antennas: withstand 1.5 m drop onto
and RX1210 controller: 1.80 kg. hard surface.
All on pole: carbon fiber pole with SmartAntenna, Topple over on pole Receiver, antennas and controllers:
RX1250 controller and plug-in batteries: 2.74 kg. withstand fall if pole topples over.
Vibrations Receiver, antennas and controllers:
ISO9022 withstand vibrations on large construction
MIL-STD-810F machines. No loss of lock.

1
The Compass signal is not finalized, although, test signals have been tracked with
GPS1200+ receivers in a test environment. As changes in the signal structure may still
occur, Leica Geosystems cannot guarantee full Compass compatibility.
SmartTrack+ Time needed to acquire all satellites after Controllers High contrast, 1/4 VGA display
Advanced GNSS switching on: typically about 50 seconds. with colour option (RX1250)
measurement Re-acquisition of satellites after loss of lock RX1210/RX1250 Touch screen, 11 lines x 32 characters.
technology (e.g. passing through tunnel): Windows CE 5.0 on RX1250.
typically within 1 second. Full alphanumeric QWERTY keypad.
Very high sensitivity: acquires more than 99 % of all Function keys and user definable keys.
possible observations above 10 degrees elevation. Illumination for screen and keys.
Very low noise. Robust tracking. Can also be used with TPS1200+ for
Tracks weak signals to low elevations and alphanumeric input and extensive coding.
in adverse conditions. Operation with Via keypad and/or via touch screen.
Multipath mitigation. Jamming resistant. controller Graphical operating concept.
Measurement precision: Same for GNSS and TPS Function keys and user definable keys.
Carrier phase on L1: 0.2 mm rms. All information displayed.
On L2: 0.2 mm rms. Displayed information All information displayed: status, tracking,
Code (pseudorange) on L1 and L2: 20 mm rms. data logging, database, RTK, DGPS, navigation,
SmartCheck+ Initialization typically 8 seconds. survey, stakeout, quality, timer, power,
Advanced, long range Position update rate selectable up to 20 Hz. geographical, cartesian, grid coordinates etc.
RTK technology Latency < 0.03 secs. Graphical display Graphical display (plan) of survey. Zooming.
Range 40 km or more in favorable conditions. of survey Can access surveyed points directly via
Self checking. Same for GNSS and TPS touch screen.
Accuracies Kinematic Stakeout display Graphical with zoom.
Horizontal: 10 mm + 1 ppm Same for GNSS and TPS Digital, polar and orthometric.
Vertical: 20 mm + 1 ppm Accuracy: 10 mm + 1 ppm at 20 Hz (0.05 sec)
Static (ISO 17123-8) update rate. No degradation with
Horizontal: 5 mm + 0.5 ppm high update rates.
Vertical: 10 mm + 0.5 ppm Operation Automatic on switching on.
Reliability: 99.99 % for baselines up to 40 km. without controller LED status indicators.
Formats supported for transmission and reception: GX1200+ only For reference stations and static measurements.
Leica proprietary (Leica, Leica 4G), CMR, CMR+, Data logging On CompactFlash cards: 256 MB and 1 GB
RTCM V2.1/2.2/2.3/3.0/3.1. Same cards used Optional internal receiver memory:
Reference station RTK rover fully compatible with Leica’s Spider for GNSS and TPS 256 MB.
networks i-MAX & MAX formats, VRS and Area Correction Capacity 64 MB sufficient for (30 % less for GPS/GLONASS):
(FKP) reference station networks. About 500 hours L1 + L2 data logging
DGPS DGPS, includes support of MSAS, WAAS, EGNOS at 15 sec rate.
and GAGAN. About 2 000 hours L1 + L2 data logging
GX1230+ (GNSS), RTCM V2.1/2.2/2.3/3.0/3.1. formats supported for at 60 sec rate.
ATX1230+ GNSS, transmission and reception. About 90 000 RTK points with codes.
GX1220+ (GNSS) – standard Baseline rms: typically 25 cm rms with suitable Data management User definable job management.
GX1210+ – optional reference station. Same for GNSS and TPS Point identifiers, coordinates, codes,
Position update rate Applies to RTK, DGPS and navigation positions. attributes etc.
and latency Update rate selectable from 0.05 sec (20 Hz) Search, filter and display routines.
to 1 sec. Multi point averaging.
Latency less than 0.03 secs. Five types of coding systems cover
NMEA output NMEA 0183 V3.00 and Leica proprietary. all requirements.
Post-processing with Horizontal: 10 mm + 1 ppm, kinematic Coordinate systems Ellipsoids, projections, geoidal models,
Leica Geo Office Vertical: 20 mm + 1 ppm, kinematic Same for GNSS and TPS coordinate, transformations, transformation
software Horizontal: 5 mm + 0.5 ppm, static parameters, country specific coordinate systems.
All GPS1200+ Vertical: 10 mm + 0.5 ppm, static Fully support of RTCM 3.1 coordinate system transfer.
receivers For long lines with long observations Application programs Standard: Full range of COGO functions.
Horizontal: 3 mm + 0.5 ppm, static Same for GNSS and TPS Hidden point.
Vertical: 6 mm + 0.5 ppm, static Optional: RoadRunner, Reference Line,
Notes on performance Figures quoted are for normal to favorable DTM Stakeout, Reference Plane, Area Division
and on accuracies conditions. Performance and accuracies can and X-Section Survey, DXF Export,
vary depending on number of satellites, LandXML Export and Volume Calculations
satellite geometry, observation time, ephemeris, Programmable User programmable in GeoC++.
ionosphere, multipath etc. Same for GNSS and TPS Users can write and upload programs for their
own special requirements and applications.
Communication One or two of the following devices can be
Data links connected: Radio modem, GSM, GPRS, CDMA.
Different frequencies and/or formats can be
received and transmitted.
Time slicing is supported.
Whether you want to survey a parcel of land or a construction site, a
facade or indoors to create as-built plans or carry out high-precision
measurements of bridge and tunnel constructions – Leica Geosystems’
surveying instruments provide the right solution for all measuring tasks.

The System 1200 Series instruments as well as the software are designed
to meet the daily challenges of modern surveying. They all have
outstanding, easy to read and user-friendly interfaces. Their straight-
forward menu structures, their clearly outlined scope of functions and
high technology perfectly mate GNSS and TPS applications in the field.
Whether you use the advantages of both technologies combined or each
separately – due to the exceptional flexibility of Leica Geosystems
instruments, reliable and productive surveying is assured.

When it has to be right.

Illustrations, descriptions and technical specifications are not binding and may change.
Printed in Switzerland – Copyright Leica Geosystems AG, Heerbrugg, Switzerland, 2008.
738812en – XII.08 – RDV

Leica SmartPole Leica SmartStation Leica GRX1200+ Series


Measure non-stop Total Station High Performance
with setup On-the-Fly with integrated GNSS GNSS Reference Receivers

Total Quality Management –


our commitment to total
customer satisfaction.

Ask your local Leica Geosystems


dealer for more information
about our TQM program.

The Bluetooth® word mark and logos


are owned by Bluetooth SIG, Inc. and Leica SmartPole Leica Leica TPS1200+ Leica System 1200 Leica GRX1200+
any use of such marks by Leica Product brochure SmartStation Product brochure Software Product brochure
Geosystems AG is under license. Other Product brochure Product brochure
trademarks and trade names are
those of their respective owners.

Leica Geosystems AG
Heerbrugg, Switzerland
www.leica-geosystems.com

Das könnte Ihnen auch gefallen