Beruflich Dokumente
Kultur Dokumente
SUMMARY SHEET
Date: 06-07-2017
R3
SL.
DESCRIPTION OF WORKS AMOUNT IN RS.
No.
1.00 FLOORING
1.01 MARBLE FLOORING - WILLIAM GREY sqm 110.00 8,600.00
Reception
Providing, cutting and laying 18-20mm thick machine cut and polished
approved Marble in pattern as indicated in drawing set in cement slurry
over 1:4 cement mortar bed of 25mm average. Joints in the flooring to
be filled with approved grout of approved shade as per manufacturers
specifications.
Quoted rate to include the cost of wastages, lead and lift, curing,
protection with 3mm Celloboard joined with Masking Tape, one coat of
stone guard till hand-over & cleaning.
Quoted rate to include the cost of chipping the floor (if required) to lay
the new flooring, and catering away the debris from site.
1.02 VITRIFIED TILE FLOORING - 600 x 600mm- TY-01 sqm 210.00 2,060.00
Cafeteria/corridor towards toilet
Providing and laying vitrified tile flooring with 3mm Spacers over 1:4
cement mortar set in cement slurry. Joints between tiling to be filled
with approved Epoxy grout of approved shade as per manufacturers
specifications. Rate to include cost for laying tiles to approved pattern,
design as directed by Architect, including curing, acid wash, etc.
Quoted rate to include the cost of Chipping and removing the Existing
Flooring , along with shifting the Debris from Site
1.03 VITRIFIED TILE FLOORING - 600 x 600mm- TY-02 sqm 75.00 1,650.00
Potwash/cutlery store/food holding area/tuck shop/ bainemarie
Providing and laying vitrified tile flooring with 3mm Spacers over 1:4
cement mortar set 20mmthk average in cement slurry. Joints between
tiling to be filled with approved Epoxy grout of approved shade & make
to match the color of the tile as per manufacturers specifications. Rate
to include cost for laying tiles to approved pattern, design as directed by
Architect, including curing, acid wash, etc.
Quoted rate to include the cost of Chipping and removing the Existing
Flooring , along with shifting the Debris from Site
Supplying & applying the GFX flooring with the following specifications.
Step -01: Providing & applying Damp proofing Membrane over existing
screed concrete/Cement concrete flooring of approved make.
Step- 02: Providing & applying Epoxy primer over the Damp proofing
membrane with Quartz Sand Broad Cast layer of 1 coat.
Step- 03: Providing & applying micro Concrete GFX 3-5mm thk as per
manufactures specification.
Cost to include provididng and laying Self levelling screed 3-5mm thk
under the vinyl flooring.
Cost to include provididng and laying Self levelling screed 3-5mm thk
under the vinyl flooring.
Cost to include provididng and laying Self levelling screed 3-5mm thk
under the Epoxy flooring.
1.14 CARPET TILE FLOORING - Cut pile Carpey ( Fluffy Carpet) sqm 31.00 3,800.00
Reception
Flammability:
Pill Test (CPSC FF1-70): PASS
FHA DATA UM44D Certification Number: 52248
Type: I
Class: 1&2
Texture: F
Warranties:
SOFTBAC PLATINUM - 10 YEAR NO WRINKLE GUARANTEE
CLEARTOUCH WARRANTIES
CRI Certification: 15508078
Green Label Plus: GLP8078
Durability Rating: 3.50
Consider basic rate of Carpet at Rs. 2900/Sqm.(excluding tax).
Mode of Measurement : Laid area will be measured for payment.
Note: floor surface needs to be grinded if required as per site condition.
Rate to include cove to profile, cut-outs for light fixtures, spot lights,
smoke detectors, Pelmets, Vertical risers as shown in dwg. and all
services cut outs as required. complete as directed by Project manager /
Architect.
Note: for Light fittings, Grills, diffusers and other cut-outs have to be
made with a frame of perimeter channels of size 20mm x 27mm x
30mmx 0.55mm thk, supported suitably. Quoted rate shall also to
include the Engineered system made up of primary sections in
galvanized steel of 21x35x3600mm in 0.75 bmt gauge. with top cross
rails and the system shall be used at 1200mm apart where direct
suspenders cannot be used due to over head ducting or any other
services.
General requisites :
GRIDS : The Main runners & 'C' Channels
Tile Specification :
Tile Type : Lay - in ceiling type
300 x 1200 x 19mm thickness, Micro-Perforated Mineral Fibre Tile.
Edge detail : GNSK
Light Relectance : Upto 90%
Humidity Relectance : Upto 95%
Colour : White similar to RAL 9010
Surface Burning characteristics : Class 0 BS 476: part7:1987
Class B1 as per DIN 4102 part 1
thermal Conductivity :0.052 - 0.057 W/mK
NRC : 0.70
thickness / Weight : 5.7Kg/sqm
Smoke Developed = 0 & Flame Spread = 5.
Tile Texture : Sand Textured
Ceiling Suspension System
Proprietary supplied ceiling suspension system to consist of 2mm or
3mm GI suspension rod/wire with adjustable adjustable threaded "J" bolt
of 3mm dia securely affixed to structural ceiling using soffit angle fixing
bracket and 10mm dia hook type anchor fastener. Ceiling suspension
system to be fixed at interval (grid) of 1200mm .
The grid system used shall be hot dipped galvanized steel sections, with
exposed surfaces chemically cleaned and capped prefinished in high -
gloss polyester enamel with two coat system on cold rolled steel.
Rate quoted to include all cut-outs required for light fixtures, smoke
detectors and other services cut-outs complete as directed by Architect.
Tile specification :
Tile type: Lay-in ceiling type
Tile size: 600mm X 600mm X 15mm thk.
Edge detail: Microlook Edge
Light reflectance: up to 0.84 ( 84% )
Humidity resistance: 99% RH
Color: White similar to RAL 9010
Surface burning characters: Class1, BS 476:Part 7:1987
Smoke Developed: 0 & Flame Spread = 5 as per UL
Thermal conductivity: 0.052 - .057 W/mk
NRC: 0.55 / 0.60
Thikness/Weight : 4.5 Kg/m2
CAC: 34 dB
Surface Pattern : Plain with random perforations
Ceiling Suspension System
Proprietary supplied ceiling suspension system to consist of 2mm or
3mm GI suspension rod/wire with adjustable adjustable threaded "J" bolt
of 3mm dia securely affixed to structural ceiling using soffit angle fixing
bracket and 10mm dia hook type anchor fastener. Ceiling suspension
system to be fixed at interval (grid) of 1200mm in both directions.
The grid system used shall be hot dipped galvanized steel sections, with
exposed surfaces chemically cleaned and capped prefinished in high -
gloss polyester enamel with two coat system on cold rolled steel.
Rate quoted to include all cut-outs required for light fixtures, smoke
detectors and other services cut-outs complete as directed by Architect.
TOPIQ Element :
• Single layer mineral wool soft acoustic board. Third party certified bio-
soluble bio-degradable mineral wool.
• Total thickness 40mm
• Surface texture : Fleece coat on all sides
• Shape : Circular
• Floating effect due to set-back fixing points
Mineral wool acoustic panel:
• Soft mineral wool acoustic panel. Third party certified bio-soluble bio-
degradable mineral wool.
• Fire protection class according to DIN EN 13501-1: A2-s1, d0
• Sound absorption: EN ISO 354
• Humidity resistance: up to 95% relative humidity
2.07 HERA DESIGN WOOD WOOL BOARD CEILING - TRIANGULAR Nos 40.00 12,000.00
SPECIFICATIONS FOR NRC =1.00 with 2000 x 600 x 25mm
thickness Triangular Suspended Heradesign tiles :
Specification :
TCH ( Totoal construction height) - 25mm
Size: 1200 * 600 * 25mm thickness
Back Filling 40 MM mineral wool : Type: DP-5 ( Gross density = 50 kg/m3 )
Light Reflectance : upto 90%.
Humidity Resistance : 95%.
Colour : As
Reaction to fire acc to EN 13501-1: B-s1,d 0
Sound absorption value: NRC upto to 1.00
Thickness/Weight : 11.3 Kg/m2
Tile Name : HERADESIGN SUPERFINE SPECIAL TRI-ANG-LE Series
Basic Price of the Board: 9750/No( including installation)
Mode of measurement: Installed ceiling/board per piece.
Note: Rate to include for LED Light fixtures as per the architects
selection & manufactures recommendation.
3.00 PARTITION
3.01 ALUMINIUM PARTITION sqm 10.00 987.00
Fabricating and fixing partition frame work consisting of 50mm x 25mm
x 1.2mm (with 0.581Kgs / Rmt as per IS Standards of Jindal or
equivalent make) thick extruded aluminum box section framework at
spacing not exceeding 600mm both ways (horizontal and vertical).
Framework formed using 50mm x 25mm x 1.2mm thick extruded
aluminum box section connected using 50mm X 25mm X 1.2mm thick
"L" angle support cleats fixed with 12mm galvanized metal screws.
Partition framework to be secured to floor, structural support and
nearest structural member using galvanized metal screws and wooden
dowels.
Quoted rate shall include providing 12mm X 25mm Aluminum L-Angle &
grooves where ever necessary as per detail dwg.
Providing & fixing 50mm thick Rock wool insulation having a density of
48Kg/CMT for opaque partitions as per detail dwg. Cost to include RP
Tissue wrapping .
Providing , Fabricating & fixing the Reception back drop using Solid
acrylic surface to a hieght of 1800mm. The MS frame work of MS box
section 30 x30mm Horizontally & vertically @ every 600mm c/c shall be
fixed to the floor using anchor fastners & base plate. The 2 layers of the
Solid acrylic surface of 6mm thk shall be fixed to the MS frame work the
first layer shall have a CNC router cut. The back of the unit shall be
cladded with 12mm thk MDF & finished with approved duco finish etc
complete as per the details shown in the drawing.
All MS sections shallbe treated with primer & 2 coats of enamel paint
All mS sections shallbe treated with primer & 2 coats of enamel paint.
The Provision of strip lighting shall be made as per the architect
requirement.
Lighting: For indoor areas/ areas with insufficient natural light, LED
Lights to be installed to cover the required area.
Light Specification:
40 W LED, 3000-4000 LUX, Track, Adjustable Dome, Throw Angle Min
120 Degrees.
Maintenance Contract:
Basic Service: Covers Trimming, Weeding & Servicing of Electro-
Mechanical Items.
20% Plant Replacement – (Recommended) includes all of Basic
Services.
100% Plant Replacement – includes all of Basic Services.
Water inlet, amenities and accessibility to be provided at site to
maintain the Green Wall Area
3.21 COLUMN PANELLING-2 Face LACQUERED GLASS+ CEMENT sqm 73.00 3,735.00
FINISH- C1
Note: The Lacquered shall be flushed in one line with gypsum skinning.
3.22 COLUMN PANELLING-2 Face LACQUERED GLASS+ CEMENT sqm 73.00 3,920.00
FINISH- C1a
The one faces (Drain water pipe) of the column shall be Packed
with 12mm thk Bison Board and cladded with gypsum skinning
& finished with Cement finish paint as per the details shown in
the drawing.
Note: The Lacquered shall be flushed in one line with gypsum skinning.
3.23 COLUMN PANELLING -CIRCULAR CEMENT FINISH+ VINYL sqm 115.00 3,465.00
GRAPHICS-C2
All Faces of the column shall be finished with approved Antifungal vinyl
graphics of approved make using adhesive etc complete as per the
manufactures recommendation & as per the details shown in the
drawing.
Providing and laying vitrified tile Dadooing 600 x 600mm with 3mm
Spacers over 1:6 cement mortar set in cement slurry. Joints between
tiling to be filled with approved grout of approved shade as per
manufacturers specifications. Rate to include cost for laying tiles to
approved pattern, design as directed by Architect, including curing, acid
wash, etc.
4.00 DOORS
4.01 FIRE DOOR
2HR. FIRE RATED DOOR
UPS/Battery/Server room/Electrical room
Opening size: - FD1 - 1200mm X 2500mm (With vision panel of nos 3.00 44,300.00
wired glass of 10mm thk)
Opening size: - FD2 - 1000mm X 2500mm (With vision panel of nos 1.00 39,400.00
wired glass of 10mm thk)
Providing and fixing in position Fire Rated Metal door with pressed steel
frame and shutter as per manufacturer’s details and as mentioned in
the drawings including fixing ironmongery etc of MPP System Schroders
make. This includes providing and fixing brush steel finished iron
mongery like Ball bearing Hinges, Mortise Locks, Dorma Handles, Push
Plates, Bolts, Door Closer, panic bar etc. (Dorma make) as indicated in
the detail drawings and all surfaces of doors shall be finished with 2
coats of Fire rating paint over a coat of primer to achieve the fire rating
as indicated in the detail drawings.
The door finished Fire retardant polish, steel pressed shutter with 2 Hour
Fire rating of Single Shutter and vision panel with Dorma Panicbar.
Complete as per design and instructions of the Architects.
Module :3: Providing & fabricating planter box formed out of 19mm
thick waterproof ply, sides shall be formed out of 19mm thick
waterproof ply. The boxing shall be cladded with laminate on all sides.
.The top to be lipped with approved 2mm thk edge binding complete as
per the drawing etc complete as per Architect's instruction.
Rate to include for natural plants of 1' ht along with GI tray & Plastic pot
etc as perthe architects instruction
Fabricating and fixing low height storage cabinet of height 850mm and
depth 750mm formed of 19mm marine grade plywood
formwork/carcass and 1 Nos. internal shelf of 19mm marine ply finished
with 1mm thk approved laminate. Shutter of storage unit to be made of
19mm thk Marine ply finshed with approved colour laminate . The
shutter shall be mounted on 3Nos.. of approved spring loaded auto
closing hinges of approved make. The rear backing of the storage shall
be formed of 8mm thick marine plywood.
Low height cabinet to be topped with 12mm thick Solid Surface counter
sandwitched at the edge to form a fascia of 40mm thick affixed to
carcass with exposed edge profiled full round and polished to high
gloss . Cost also to include 50mm backspalash in 12mm thk Solid Acrylic
as per the drawing and instructions of the Architect. as per detail dwg.
Rate to include for SS rim of 200mm dia in the counter & the counter
shall be cut to the size & SS rim shall be fixed for the Dustbin
265.59.50ETANDEMBOX PLUS M-HEIGHT GREY STANDARD DRAWER WITH A WEIGHT SET 6.00 3,550.00
CAPACITY: 30 Kg FOR A NOMINAL LENGTH OF 500mm
Item Status: Active
TBX.20.GR TANDEMBOX PLUS D-HEIGHT GREY STANDARD DRAWER WITH A WEIGHT SET 1.00 4,775.00
CAPACITY: 65 Kg FOR A NOMINAL LENGTH OF 500mm
Item Status: Active
556.24.962CUISIO SET GRAPHITE TRANSLUCENT FOR 900MM DRAWER WIDTH SET 2.00 6,850.00
INCLUSIVE DIVIDER & ALU. RAILS 2257.41.40686
Item Status: Active
152.01.501PVC - BUBBLE EMBOSSED MATTING IN GREY SHADE, 1500 MM X 1.2 MM MTR 4.00 3,320.00
THICK
Item Status: New
265.59.50ETANDEMBOX PLUS M-HEIGHT GREY STANDARD DRAWER WITH A WEIGHT SET 6.00 3,550.00
CAPACITY: 30 Kg FOR A NOMINAL LENGTH OF 500mm
Item Status: Active
TBX.20.GRZTANDEMBOX PLUS D-HEIGHT GREY STANDARD DRAWER WITH A WEIGHT SET 1.00 4,775.00
CAPACITY: 65 Kg FOR A NOMINAL LENGTH OF 500mm
Item Status: Active
556.24.962CUISIO SET GRAPHITE TRANSLUCENT FOR 900MM DRAWER WIDTH SET 2.00 6,850.00
INCLUSIVE DIVIDER & ALU. RAILS 2257.41.40686
Item Status: Active
c. COLLAB- 03
CTB.CS.107CLIP TOP BLUMOTION 107° STANDARD HINGE FOR OVERLAY PC 4.00
APPLICATIONS AND CLIP STEEL CRUCIFORM MOUNTING PLATE SET
Item Status: Active
246
265.59.50ETANDEMBOX PLUS M-HEIGHT GREY STANDARD DRAWER WITH A WEIGHT SET 6.00
CAPACITY: 30 Kg FOR A NOMINAL LENGTH OF 500mm
Item Status: Active
3542
TBX.20.GRZTANDEMBOX PLUS D-HEIGHT GREY STANDARD DRAWER WITH A WEIGHT SET 1.00
CAPACITY: 65 Kg FOR A NOMINAL LENGTH OF 500mm
Item Status: Active
4771
556.24.962CUISIO SET GRAPHITE TRANSLUCENT FOR 900MM DRAWER WIDTH SET 2.00
INCLUSIVE DIVIDER & ALU. RAILS 2257.41.40686
Item Status: Active
6846
556.50.557PLATES ORGANIZATION FOR DRAWER WIDTH - 800-840MM, HEIGHT- PC 1.00
60MM, SILVER COLLARED
Item Status: Active
3320
152.01.501PVC - BUBBLE EMBOSSED MATTING IN GREY SHADE, 1500 MM X 1.2 MM MTR 3.00
THICK
Item Status: New
1500
Fabricating and fixing low height storage cabinet of height 850mm and
depth 600mm formed of 19mm marine grade plywood
formwork/carcass and 1 Nos. internal shelf of 19mm marine ply finished
with 1mm thk approved laminate. Shutter of storage unit to be made of
19mm thk Marine ply finshed with approved colour laminate . The
shutter shall be mounted on 3Nos.. of approved spring loaded auto
closing hinges of approved make. The rear backing of the storage shall
be formed of 8mm thick marine plywood.
Rate to include for SS rim of 200mm dia in the counter & the counter
shall be cut to the size & SS rim shall be fixed for the Dustbin
Cost to include provididng and fixing SS Grill of size 100 x 150mm for
Ventilation and Air Circulation.
Note: For curved surface 6mmthk flexi ply & 4mmthk MDF shall be used
Consider Basic cost of Laminate @ Rs. 485/sqm
Consider Basic cost of Vener @ Rs. 1800/sqm
Base: The base of the table shall consist of MS / Aluminium legs as per
manufacturers spec together by welding, with levellers complete as per
detailed dwg.
Cost also to include provididng and Fixing 50mm dia Spine as per
Manufacturers specs.
Note: Curved surfaces & edges in curved surfaces shallbe as per the
details shown in the drawing.
Rate to include for aluminium flip open box/ gourmet hole & the
Electrical socket cable management etc as per the details shown in the
drawing.
Providing & fabricating counter top made up of 19mm thick Marine ply
finished with 20mm thk approved Granite , 600mm deep. All the
exposed edges to finished with approved edge finishing , the table top
shall be supported by 50mm dia M.S supports powder coated. complete
as per Architect's instruction.
5.14 HIGH RAISED C SHAPE TABLE - SOLID ACRYLIC FINISH Nos 2.00 246,000.00
Cafeteria
Dimension: 7650x600x1050mm ht
Counter top: Counter top to be formed of 25mm x25mmx 2mm thk M.S
Box section frame work welded together to be cladded with12mm thick
marine ply to make boxing of 60mm thk finished with 6mm thk
approved Corian on top side , from inner & bottom side . The edge of
the table top shall be finished with approved colour Corian river fall
edge, complete as per the dwg and the instructions of the Architect.
Base: Base to be formed out of of 50mm x50mm 2mm thk M.S frame
work welded together to be cladded with 19mm thick Marine ply to
make boxing of 75mm thk finished with Packing wood of 60mm x
20mm thk with 20mm c/c & Finished with melamine polish. complete
as per the detailed dwg and instructions of the Architects.
5.20 BAINE MARIE & TUCK SHOP PORTAL - CAFETERIA Nos 1.00 83,700.00
18000x300x600mm ht
Providing and fixing Portal 175mm thk made out of 25 x 25 x 2mm thk
MS Frame work welded together to be cladded with 19mm thk Marine
ply finished with . with Packing wood of 60mm x 20mm thk with 20mm
c/c & Finished with melamine polish. & from inside finished with
approved acrylic emulsion paint over 12mm thk Gyp etc complete as
per the detailed dwg and instructions of the Architects. the frame work
shall be fixed to the true ceiling & wrapped with 19mmthk marine ply.
Base : Base shall be formed out of 19mm thick waterproof ply, sides
shall be formed out of 19mm thick waterproof ply. The boxing shall be
cladded with laminate on all sides.The top to be lipped with approved
2mm thk edge binding complete as per the drawing etc complete as per
Architect's instruction.
Cost to include providing and Fixing GI Tray & plastic pot along with
natural plants in side the Planter box as per the detailed dwg.
Truff: Providing, Fabricating & fixing the Truff of 150mmhigh around the
green wall formed out of 30x30mm thk MS boxsection cladded with
19mm thk ply & finished with 2mm thk Interior grade alcobond of
approved shade etc complete as per the details shown in the drawing &
fixed to the wall.
The Cement finish shall have rivet of approced size & approved loations
& grooves of 6mm x 6mm as per the architects requirement & details
shown in the drawing.
Note: Cement paint applied over 12mmthk MDF to achieve the rivet of
required size & grooves
Providing & fixing Ramp Made frame work made out of 25mm X 25mm
MS Section, fixed at 150mm centre to centre. The horizontal members
to be formed out of 25mm X 25mm MS Section fixed at ground . The
top to be Covered with a layer 6mm thick MS Checkered Plate ,
complete as the detail dwg and the Architects instructions
Base : Base shall be formed out of 19mm thick waterproof ply, sides
shall be formed out of 19mm thick waterproof ply. The boxing shall be
cladded with laminate on all sides.The top to be lipped with approved
2mm thk edge binding complete as per the drawing etc complete as per
Architect's instruction.
Cost to include providing and Fixing GI Tray & plastic pot along with
natural plants in side the Planter box as per the detailed dwg.
Providing & laying the 19mm (+/-)1mm thk prepolished Jet black granite
jambs of 200mm width as per the drawing & wherever specified in the
flooring layout using average 20mm thk Cement mortar 1:4 etc
complete as per the drawings & engineer incharge & architects
instruction. Rate to include for chamfering the edges as per the
drawings.
Providing & laying the 19mm (+/-)1mm thk prepolished Jet black granite
jambs of 200mm width as per the drawing & wherever specified in the
flooring layout using average 20mm thk Cement mortar 1:4 etc
complete as per the drawings & engineer incharge & architects
instruction. Rate to include for chamfering the edges as per the
drawings.
Consider the Basic cost of 3M Film as Rs . 3120 / sqm excluding taxes
8.02 DEMOLITION OF 150MM THICK SIZE-SOLID BLOCK MASONRY sqm 10.00 250.00
Demolition of 150mm thick SBM wall with the plastering including
carting away the same as directed by the Engineer-in-charge.
8.06 CONTRUCTION OF 75MM THICK SIZE-AEROCON PANEL MASONRY sqm R/o 1,506.00
Providing and constructing 75mm thk Aerocon Panel masonry of size
600x75x2700mm and strength not less than 35 Kg/sqm in
superstructure including cost of materials, labour charges, scaffolding,
curing complete as per specifications.
8.23 HOUSE KEEPING - DEEP CLEANING ONLY AT FINAL STAGE LS 1.00 395,000.00
Providing house-keeping support with General House keeping for the
entire site including clearing of wastes out of the premesis in regular
basis inclusive of all dedicated labour and supervisory personnel at all
times of work, across the entire facility. Cost to include all equipment,
consumables(Industrial type vaccum machine(Dry& wet),mop
stick,broom stick)Minimum of 10 housekeeping labours with 1
supervisor, protective and safety measures, etc. complete. The site
shall be kept clean to the complete satisfaction and based on
instructions from the Project Managers.
Amount
946,000.00
432,600.00
123,750.00
Amount
291,900.00
612,750.00
1,589,775.00
Amount
191,750.00
35,190.00
Amount
20,250.00
266,800.00
50,000.00
117,800.00
Amount
4,678,565.00
84,000.00
Amount
337,500.00
Amount
92,020.00
Amount
2,866,820.00
51,750.00
Amount
467,400.00
1,303,800.00
480,000.00
Amount
164,700.00
Amount
5,847,990.00
9,870.00
255,000.00
Amount
366,000.00
2,575.00
560,000.00
15,225.00
87,000.00
Amount
65,190.00
662,625.00
21,880.00
Amount
256,000.00
194,700.00
Amount
164,100.00
189,475.00
438,400.00
Amount
303,050.00
623,450.00
Amount
172,200.00
780,750.00
272,655.00
Amount
286,160.00
Amount
398,475.00
377,600.00
Amount
138,600.00
30,800.00
26,625.00
Amount
6,698,405.00
132,900.00
39,400.00
100,200.00
Amount
37,500.00
310,000.00
44,250.00
Amount
54,100.00
137,710.00
270,490.00
Amount
3,000.00
21,300.00
4,775.00
13,700.00
3,320.00
Amount
13,280.00
1,000.00
21,300.00
4,775.00
13,700.00
3,320.00
4,500.00
7,770.00
984.00
21,252.00
4,771.00
13,692.00
3,320.00
4,500.00
47,214.00
Amount
41,300.00
Amount
45,437.70
51,900.00
Amount
341,500.00
437,200.00
Amount
19,675.00
27,740.00
34,440.00
40,040.00
Amount
492,000.00
63,900.00
59,000.00
47,200.00
Amount
11,800.00
1,280.00
72,800.00
83,700.00
Amount
49,200.00
54,650.00
2,692,785.70
Amount
174,000.00
1,339,500.00
449,400.00
Amount
1,962,900.00
190,000.00
12,000.00
7,870.00
62,700.00
2,700.00
Amount
9,850.00
14,800.00
49,200.00
19,675.00
39,350.00
182,000.00
18,000.00
12,300.00
86,250.00
49,200.00
Amount
49,200.00
47,970.00
49,200.00
17,200.00
41,280.00
18,500.00
123,000.00
Amount
123,000.00
24,590.00
19,700.00
33,660.00
32,460.00
Amount
415,200.00
34,040.00
7,400.00
10,500.00
Amount
141,840.00
2,355.00
16,550.00
3,465.00
49,600.00
2,016,605.00
2,500.00
2,500.00
790.00
Amount
2,740.00
591,500.00
189,000.00
Amount
54,950.00
20,650.00
44,800.00
20,340.00
6,890.00
5,900.00
Amount
3,200.00
103,350.00
109,500.00
37,800.00
9,960.00
21,880.00
25,580.00
Amount
10,835.00
10,285.00
395,000.00
1,669,950.00
BILL OF QUANTITIES
SL.N
DESCRIPTION UNIT QTY RATE Rs. AMOUNT Rs.
O
1.00 ROLLER BLINDS - with Spring Booster System sqm 577.00 1,129.00 651,433.00
Providing & fixing in position Roller Blinds of
approved shade with following technical
specification.
Mechanism details:
Operation: Manual roller
Roller tube: Shall be extruded aluminium. The
outside diameter of the tube shall be 25mm or
34mm depending upon the application.
Fabric specification:
Fabric description : Combine visual comfort and
thermal performance - Screen fabric for internal
roller blinds - Two sides, two functions to combine
visual comfort and thermal performance.
Mechanism details:
Operation: Manual roller
Roller tube: Shall be extruded aluminium. The
outside diameter of the tube shall be 25mm or
34mm depending upon the application.
Fabric specification:
TOTAL 668,393.00
Technical specification
Washing cycle capacity per sec 90/120/140
8.00 CLEAN PLATE STORAGE RACK WITH 5 SHELVES 2 1500 X 600 X 1800 47,212.00
Glass Racks
9.00 2 500 x 500 x 100mm 4,368.00
73 x 73mm for 36 Glasses (6 X 6)
TOTAL
Amount
159,015.00
111,803.00
13,104.00
13,104.00
472,118.00
Amount
29,833.00
38,522.00
94,424.00
8,736.00
142,937.00
1,083,596.00
1 All chasing in wall for CPVC / GI pipes shall be carried out by electric chasing machine.
2 Any bore to be done in RCC wall, slab and beams shall be done by core cutting machine.
3 Rate only(RO)items have been given in lieu of considering the same on any revisions in Design/as by
4 client.
The items have been segregated as supply and installation to facilitate the scope to be decided by the
5 arch / clientshall include cutting in walls and making good the walls & floors. Size of wash basin
The works
55 x 40cm.(Granite / Marble counter will be installed by other agency)
6 Wall chasing shall be done with chasing machine to required lines and levels.
7 Sanitary ware and CP fittings model numbers to be confirmed by architects / Clients
8 water proofing in toilets not considered in our BOQ.
9 Terrace floor water proofing for toilet area not considered.
SL.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
SECTION - A : CPVC PIPES AND FITTNGS (INTERNAL TOILETS AND KITCHEN WATERSUPPLY):
01 Supplying & fixing of CPVC pipes confirming to ASTM
standard including all CPVC fittings like tees, elbows,
bends, unions, coupling, reducer tees, collars etc. The work
shall include cutting jointing with solvent cement pressure
testing the joints pipeline for 10 kg/sq.cm hydraulic
pressure, for 2 hours hours etc., fixed on to the wall in
vertical shafts/including making good the walls and floors.
95
Project: Interior for GE Digital @ ChennaiOwner : GE Digital
SL.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
02 Supplying and fixing of CPVC ball valves with knob
operated and tested to 20kg / sq.cm.
05 Supplying and fixing 6mm / 8mm dia Anchor fasteners for Nos. 5 502 2510
suspending GI rods for pipe bracket support etc., complete.
(Hi - tech make)
TOTAL 90970
96
Project: Interior for GE Digital @ ChennaiOwner : GE Digital
SL.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
01 Supplying , fixing, testing and commissioning of PVC soil,
waste and vent pipe confirming to IS 13592 of SWR
quality 6 kg / sq.cm pressure rated self fit type with socket
and solvent cement joint including all fittings, like Bends,
Tees, Elbows, Collars, junction, inspection doors, cowls,
offsets, access pipes, jointing with solvent cement followed
by application of leak proof adhesive concrete 1:2:4 as
applicable, curing etc., complete.( Interal toilets &
kitchen)
97
Project: Interior for GE Digital @ ChennaiOwner : GE Digital
SL.
DESCRIPTION UNIT QTY RATE AMOUNT
NO.
6 Supply, installation, testing & commissioning of Oil/Grease Nos 2 67124 134248
separator ECO-MOBILE TYPE-0.5 with sludge trap according
to DIN EN 450, for free standing installation, of
polyethylene, material LLD-PE, with grease storage
capacity 20 litres, total wastewater capacity 200 litres,
with direct suction, with connecting flange DN 100 PN 10
For local suction line R 2 1/2”, with fire hose quick coupling
B with 2 odour proof maintenance openings, inlet and
outlet DN 100. With Inspection Windows & Filling Device.
(Make: ACO ). The rate shall include necessary, Knife
edged Bypass valves of 3 No., piping et, complete
TOTAL 220353
SECTION - A : CPVC PIPES AND FITTNGS (INTERNAL AND EXTERNAL WATERSUPPLY): 90,970.00
SECTION - B : PVC SOIL,WASTE,VENT PIPES AND FITTINGS ( INTERNAL & EXTERNAL) 220,353.00
TOTAL 311,323.00
EXCLUSIONS
1 Kitchen equipments Not considered
3 considered tapping line from the existing duct
4 RO water unit not considered, it will be in the scope Kitchen consultant
5 Kitchen SS drain works are not considered
98
Project: Interior for Mediatek @ RMZ Eco World , BangaloreOwner: Mediatek
TYPE OF
SL.NO. DESCRIPTION UNIT Total Qty SIZE RATE
SIGNAGE
Providing & fixing in position Signages with the following
specifications.
1.00 Workstations Nos R/o Mounted 250 x 50mm 2,509.00
Providing and fixing signage with 2mm thk Acrylic casing with 1mm thk ACP
plate with Black vinyl sticker names fixed on the surface with Birla 3M
double sided sticker as per the approved sample.
2.00 Office Area Signages Nos 22.00 Mounted 300 x 75mm 465.00
Providing and fixing signage with 2mm thk SS brush finished plate with Black
vinyl sticker names fixed on the door with Birla 3M double sided sticker as
per the approved sample.
3.00 Rest Room ( Gents , Ladies & Handicap) Nos 3.00 Mounted 130x 150mm 372.00
Providing and fixing signage with 3mm thk ACP Sheet SS brush finished
plate with SS Symbol fixed with Birla 3M double sided sticker as per the
approved sample.
4.00 Push & Pull Signage on Glass Door Nos 8.00 Mounted 100 x 50mm 279.00
3mm thk brushed finished logo with viny sticker fixed with screws. as per
approved sample.
5.00 Rest room way indicator Nos suspended 150mmX 300mm 743.00
3.00 from the false
ceiling
Providing signage of 3mm thk SS brush finish ACP/Sunboard with vinyl
sticker on both sides as per design . Signage to be suspended from false
ceiling using SS chain, as per image attached.
10230
1116
2232
2229
43680
59,487.00
Note:
The following is the list of approved make/brand against each product. Where more than one
brand has been specified, the names are given in order of preference. Contractor is to quote rates
based on the materials of 'first preference' after ascertaining availability, delivery schedules and
other parameters affecting delivery. Unless the Contractor stipulates to the contrary in his tender, it
shall be assumed that the rates quoted are for materials of first preference.
In the event that the Contractor is permitted to use materials of a lower preference due to valid
reasons then the contract rates shall be adjusted pro-rata on the basis of valuation of first
preference materials. In the event that the prices are higher than that of first preference materials
then the Owner is not liable to make any enhanced payment towards that item of work.
SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION
2 PLYWOOD CENTURY
COMMERCIAL
GRADE
GREENPLY
ARCHID PLY
APPROVED EQUALENT
3 PLYWOOD CENTURY
MARINE GRADE
GREENPLY
ARCHID PLY
APPROVED EQUALENT
4 DECORATIVE GREENLAM
LAMINATES
MERINO
ARCHIDPLY
APPROVED EQUALENT
SL.N VENDORS
ITEM DETAILS
O. APPROVED EQUALENT CONFIRMATION
JACKSON ( veneer )
URO ( veneer )
7 GLASS, SAINTGOBAIN
MIRROR
ASAHI
MODI FLOAT
7a LAQURED SAINTGOBAIN
GLASS
ASAHI
APPROVED EQUALENT
SHERWIN WILLIAMS
APPROVED EQUALENT
BERGER
SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION
11 TEXTURED OIKOS
PAINT
SPECTRUM HERITAGE
ARMOUR COAT
12 AUTOMOTIVE ICI
PAINT
ASIAN
BERGER
APPROVED EQUALENT
14 MELAMINE MRF
POLISH
LIGHT HOUSE
SHEENLAC
APPROVED EQUALENT
15 PATCH DORMA
FITTINGS
GEZE
ASSABLOY
APPROVED EQUALENT
GEZE
ASSABLOY
APPROVED EQUALENT
SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION
ASSABLOY
APPROVED EQUALENT
19 EXPOSED / DORMA
CONCEILIED
DOOR CLOSER
GEZE
ASSABLOY
APPROVED EQUALENT
20 BEARING DORMA
HINGES
UNION
GEZE
APPROVED EQUALENT
21 MORTISE DORMA
HANDLE
GEZE
ASSABLOY
APPROVED EQUALENT
GEZE
ASSABLOY
APPROVED EQUALENT
SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION
GEZE
ASSABLOY
APPROVED EQUALENT
GEZE
ASSABLOY
APPROVED EQUALENT
25 FLOOR DORMA
MOUNTED
DOOR STOPPER
GEZE
ASSABLOY
APPROVED EQUALENT
26 CONCEALED DORMA
TOWER BOLT
GEZE
UNION FB 10 SS
KICH IB 106 SS
GODREJ
EBCO
SL.N VENDORS
ITEM DETAILS
O. EBCO CONFIRMATION
EBCO
EBCO
32 CABINET HAFLE
HANDLES 96 BLUM
MM
EBCO
33 SCREWS
JOINERY WORKS NETTLEFOLD IS 1365, GI
screws
KURLON
MM FOAM
35 VITRIFIED EURO
TILES
NITCO
KHAJARIA
JOHNSON
DURATO
SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION
HILTI
ARDEX
CORAMANDAL 43 GRADE
BIRLA 43
BIRLA WHITE
APPROVED EQUALENT
39 FROSTED FILM 3M
LUMAR
ULTRAMARK
APPROVED EQUALENT
40 COMPOSITE ALUCOBOND
ALUMINIUM
INTERIOR
TIMEX BOND
GRADE ( 3MM
THICK )
EURO BOND
DDECOR
KIMCO
ROCKWOOL
SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION
BLUM
ICI
BERGER
ESSAR
46 ANTI-STATIC TARKETT
VINYL
FLOORING
ARMSTRONG
GERFLOR
47 VINYL FILM 3M
LUMAR
LG
48 ALUMINIUM JINDAL
SECTIONS
INDAL
APPROVED EQUALENT
PALLADIO
APPROVED EQUALENT
TESCO
UNICOS
APPROVED EQUALENT
INSIDE SPACES
ENGRAPHICS
MARSHALL
APPROVED EQUALENT
54 WATER FOSROC
PROOFING
SIKA INDIA PVT.LTD
PIDLITE
ARDEX
WALL TRACTS
HUNTER DOUGLAS
VISTA
ARMSTRONG
USG
57 SANITARY KOHLER
& CP FIXTURES
GROHE
AMERICAN STANDARD
ROCA
APPROVED EQUALENT
LAGYP
BORAL BOARDS
59 GLASS INTACT
PARTITION
SYSTEM
DEKO
ALLOY
CITTERIO
60 SLIDIDNG DORMA
FOLDIGN
PARTITION
HAFFLE
HUFCOR
SL.N VENDORS
ITEM DETAILS
O. CONFIRMATION
GEZE
61 EPOXY ROFF
FLOORING
FOSROC
APPROVED EUQUIVALENT
LD2 TECHNOLOGIES
LINDNER
APPROVED EUQUIVALENT
FAME LINE
FLOOR JINNI
BARRILUX
BARRISOL
PROMAT
66 AUTOMATIC DORMA
SLIDIDNG
DOOR
GEZE
STANLEY
SL.N VENDORS
ITEM DETAILS
O. STANLEY CONFIRMATION
HANEX
LG
APPROVED EUQUALENT
73 TENSILE FERRARI
FABRIC
VISTA
APPROVED EUQUALENT
FUTURA
FRANKY - FABER
APPROVED EUQUALENT
69 COMPACTORS GODREJ
SAFEGUARD SYSTEM
METHODEX
70 SLOTTED GODREJ
ANGLE
STORAGE
PAN INDIA SYSTEMS
APPROVED EUQUALENT
a Rates quoted must have full compliance with the following including the cost of grey cement, and
white cement.
b The owner reserves the right to supply or issue price basis for any material item.
c The owner reserves the right to 'lend' his name for all imported items in order to avail any possible
duty exemptions and the said benefit shall go to the owner.
d The items which are supplied free of cost need to be reconciled at the end of the project based on
material constants.
f Basic rate shall not include all taxes, delivery, handling charges, wastage & delivered at site.
Notes: The contractor is to note and allow the following preambles in his scope of work.
b. All internal woodwork shall be treated with anti termite and fire retardant paint
c. All internal surfaces of cabinets, etc in conventional carpentry works shall be finished with 0.8mm
thick matt finished laminate of approved shade
d. All under surfaces of furniture (tables, counters, etc) to be finished with 0.8mm thick matt finished
laminate of approved shade
e. All exposed horizontal laminated surfaces shall be finished with 1mm thick laminate of approved make
shade unless otherwise specified.
f. All exposed vertical laminated surfaces shall be finished with 1.0mm thick laminate of approved make
shade unless otherwise specified.
g. All exposed veneer shall be group matched natural cut plain veneer of approved make and shade.
h. All exposed veneered, wood surfaces shall be finished with matt melamine polish to approved shade.
I. All exposed edges of plywood, blockboard etc shall be finished with 3mm thick lipping beading of
specified wood.
j. All plywood, blockboard for office areas shall be water resistant, termite/borer proof commercial grade
of specified make.
k. All plywood, blockboard for wet areas (toilets/pantry) shall be termite/borer proof and waterproof
marine grade of specified make.
l. Timber used shall be kiln seasoned and should be free from shrinkage, warpage even after fabrication
of furniture.
m. Provision to be made for additional supports and reinforcement that may be required for stability and
evenness at where curved partition is constructed.
n. Contractor to make provisions of all necessary scaffoldings to facilitate high level installations.
p. Where the use of spring loaded auto closing hinges is specified, the same shall be installed strictly as
per manufacturers guidelines and relevant tools required for the same.
For partition frame work : 16/8 no. sheet metal screw 16mm in length.
For partition anchoring on floor & true ceiling : 75/10 no. sheet metal screw 75mm in length.
For 6mm thick ply panelling 19/6 no. sheet metal flat head screw, 12mm thick ply panelling 25/8 no.
sheet metal flat head screw, for 19mm thick ply panelling 32/8 no. sheet metal screw.
For fixing drawer channel : For bottom channel - 19/6 no., For side - 9.5/6 no. sheet metal screw.
For fixing metabox drawer channel : 9.5/6 no. sheet metal screw.
For fixing auto closing hinge : 16/6 round philip head screw.
2 FLOORING WORKS
a. Receiving all materials supplied by the Owners / your vendors, unloading, storing at location specified
by the project manager. No additional payment will be paid for any increase lead from this location
conveying to work site & fixing in position. (If any materials supplied by Owner).
b All finished flooring shall be covered with plaster of Paris of 6mm thick over a plastic film without any
extra cost till handing over to the Owner.
c. Daily housekeeping of work areas which includes segregation of debris like cement based, plastic,
glass, wood and collecting in containers provided to/by you, at an acceptable location inside the site
premises.
d. Granite slabs should be free of all defects and all grains / patterns shall be properly matched from the
same lot. Any colour / lot variation shall be rejected.
e. The minimum quality benchmark will be decided by the Owner / Project management consultant /
Architect based on mock up samples before commencing the work.
f. Unless otherwise specified the rates quoted shall be inclusive of the following ~ Cost of material,
taxes, transport, labour, overheads and profit, etc.,
g. The basic rate of granite/marble includes supply, taxes and delivery to site, delivered and unloaded to
the point of cutting, the same. All granite material shall be "gang saw water cut".
I. If there is a reduction is the basic rate the cost for the same shall be adjusted pro rata in the quoted
rates. No increase in basic rates shall be allowed without written approval from the Architect.
j. Base sub-grade/sub-floor to be prepared by cleaning all dust/loose particles, caked mortar droppings,
etc by scrubbing with steel wire brushes. Surface to be roughened if so required and surface cleaned
with water and kept wet for minimum 12 hours.
k. Bedding layer of mortar to be provided as directed in the case of 19mm+ slabs to correct level, step as
instructed.
n Finished floor must be cured by keeping wet for atleast 1 week after installation.
s In the instance of granite/marble floors, the contractor has to obtain prior approval on dry laying. Wet
laying to be carried out only on approval. Not extra cost shall be paid for dry laying.
ecifications.
metal flat head screw, 12mm thick ply panelling 25/8 no.
ck ply panelling 32/8 no. sheet metal screw.
d SS screw.
nnel - 19/6 no., For side - 9.5/6 no. sheet metal screw.
e cost for the same shall be adjusted pro rata in the quoted
lowed without written approval from the Architect.
ed grout as specified/directed.
ment only.