Beruflich Dokumente
Kultur Dokumente
N
A
P
I
T
See Pages 9
Input EMI
90 to Filtering
265 Vac and
Rectification
• Featuring NCP1910 high
12Vout
performance CCM PFC +
LLC combo controller
12V_RTN
• Satisfies 80 PLUS® Gold efficiency
2x NCP4303
specifications Sync Rec
• Integrated ON/OFF and Power OK signal NCP1910
12V_FB
NCP4303B
SR Controller
90 to EMI
265 Vac Filter
Synchronous Rectification
for Improved Efficiency
NCP1605
PFC NCP1397B
Controller 12 V/20 A
Resonant Controller
with Built-In
Half Bridge Driver
Frequency Clamped
Critical Conduction Mode
Power Factor Controller Bias TL431
Circuitry
NCP4303B
Resonant Technology SR Controller
for Increases Efficiency
and Lower EMI
ON Semiconductor Page 3
300 W SLIM LCD TV Power Primary to Secondary
Galvanic Isolation
AC Line Vout
ZCD/OPP
OVP
EMI
Filtering NC1380A/B
OTP
• 24 V flyback power adapter for printers delivering 30 W steady state with transient capability of 48 W
• Supplies 7.25 V, 70 mA in standby mode
• Utilizes NCP1219 current-mode flyback controller with dynamic self supply for a cost effective, low parts count design
• Download AND8393/D for more information
ON Semiconductor Page 5
40 W AC-DC Power Adapter
• Compact, high performance 12 V, 3.3 A flyback power adapter
• Featuring highly integrated NCP1250 fixed frequency flyback
controller in a small TSOP-6 package
• Average efficiency of > 87%
• No load input power of 33 mW at low line
• Download AND8486/D for more information
(100 kHz)
• Intended for use in white goods, E-meters, and low
power communication equipment
• Download AND8489/D for more information OPTO
ON Semiconductor Page 7
Supporting Materials — Power Factor Correction
Device Type Designator Description
Design Tool — NCP1653 PFC Boost Design Worksheet
Evaluation Board NCP1653EVB NCP1653 PFC Dive Continuous Conduction Mode Step-Up Pre-Converter Evaluation Board
Application Note AND8185/D 300 W, Wide Mains, PFC Stage Driven by the NCP1653
NCP1653 Application Note AND8184/D Four Key Steps to Design a Continuous Conduction Mode PFC Stage Using the NCP1653
Application Note AND8256/D Output Voltage Range Control in NCP1653 Driven PFC Stages
Reference Design TND321/D 220 W LCD TV Power Supply Reference Design Featuring NCP1395 and NCP1653 Documentation
Reference Design TND313/D 300 W, 80 PLUS Compliant ATX Reference Design Documentation Package
Design Tool — NCP1654 Design Worksheet
Evaluation Board NCP1654PFCGEVB NCP1654 PFC Continuous Conduction Mode Step-Up Pre-Converter Evaluation Board
Application Note AND8321/D Compensation of a PFC Stage Driven by the NCP1654/5
NCP1654
Application Note AND8322/D Four Key Steps to Design a Continuous Conduction Mode PFC Stage Using the NCP1654
Application Note AND8324/D 300 W, Wide Mains, PFC Stage Driven by the NCP1654
Application Note AND8392/D 800 W Bridgeless PFC Stage
+Vout
VCC
FLYBACK
CONTROL
CIRCUITRY GND
DRV
FB CS NCP4303
VCC DRV
Min_Toff GND Features — NCP4303
Min_Ton COMP
Trig CS
• Self contained control of synchronous rectifier in
CCM, DCM, and QR flyback applications
• Precise true secondary zero current detection with
adjustable threshold
NCP4303 Typical Application Example – DCM or QR Flyback Converter • Automatic parasitic inductance compensation input
Supporting Materials
Device Type Designator Description
NCP4303 Reference Design TND399/D 216 W All in One Power Supply GreenPoint® Reference Design
NCP4303 Reference Design TND313/D 300 W, 80 PLUS® Certified ATX Power Supply GreenPoint® Reference Design
ON Semiconductor Page 9
Supporting Materials — AC-DC Controllers and Regulators
Device Type Designator Description
Application Note AND8125/D Evaluating the Power Capability of NCP101X Members
Application Note AND8132/D Performance Improvements to the NCP1012 Evaluation Board
Application Note AND8134/D Designing Converters with the NCP101X Family
Application Note AND8136/D Offline isolated power supply to drive 3 LEDs
Application Note AND8142/D A 6 W/12 W Universal Mains Adapter with the NCP101X
Application Note AND8190/D Non-isolated Negative Output Buck AC/DC Converter
Application Note AND8191/D Non-isolated Positive Output Buck/Boost AC/DC Converter
Application Note AND8224/D NCP101x LED Flasher with Luxeon V Star LED
Application Note AND8225/D Nonisolated Negative Output Buck/Boost AC/DC Convertor
Application Note AND8226/D Nonisolated Positive Output Buck AC/DC Converter
Application Note AND8272/D Implementing Simple Brown-Out Solution for NCP101X Series
Application Note AND8318/D Offline Buck Converter with Tapped Inductor Improves Performance
Application Note AND8328/D 700 mA LED Power Supply Using Monolithic Controller and Off-Line Current Boosted (Tapped Inductor) Buck Converter
Application Note AND8334/D Understanding Loop Compensation with Monolithic Switchers
Application Note AND8395/D Simple Secondary Side Vcc Source for Low Power CVCC Power Supplies
Design Note DN06002/D NCP1012: 1 W, Dual Output, Off-line Converter
Design Note DN06002/D NCP1012: 1 W, Dual Output, Off-line Converter
Design Note DN06003/D NCP1014: 8 W, 3-Output Off-Line Switcher
Design Note DN06005/D NCP1014: 10 W, 3-Output Off-line Power Supply
NCP1010~15
Design Note DN06009/D NCP1014: 5 W, CCCV Cell Phone Battery Charger
Design Note DN06011/D NCP1014: 8 W Off-Line Non-Isolated Buck Regulator
Design Note DN06013/D NCP1012: 3.6 W Auxiliary Power Supply for Appliances / White Goods
Design Note DN06013/D NCP1012: 3.6 W Auxiliary Power Supply for Appliances / White Goods
Design Note DN06017/D NCP1011: Efficient, Low Cost, Low Standby Power (<100 mW), 2.5 W CCCV Charger
Design Note DN06020/D NCP1014: 10W, Dual Output Power Supply
Design Note DN06027/D NCP1013: Universal Input, 5 W, LED Ballast
Design Note DN06034/D NCP1014: Universal Input, +/- 12 V Output, 8 Watt Power Supply
Design Note DN06037/D NCP1014: Low Power, Off-Line Buck, CVCC Power Supply
Design Note DN06051/D NCP1014: Improving the Power Factor of Isolated Flyback Converters for Residential ENERGY STAR® LED Luminaire Power Supplies
Design Note DN06052/D NCP1014: 5 V, 400 mA Current Boosted Buck Converter
Design Note DN06064/D NCP1014: 12 Watt Mini Boost Power Factor Corrector for LED applications
Design Note DN06065/D NCP104, NSI45025:Universal Off-Line LED String Driver with PFC
Design Note DN06066/D NCP1014: Low Power, Off-Line, Constant Voltage Non-Isolated Power Supply
Evaluation Board NCP1012GEVB NCP1012 SMPS Switcher Evaluation Board
Evaluation Board NCP1014LEDGTGEVB 8 W Offline LED Driver Intended for ENERGY STAR® Residential LED Luminaire Applications
Evaluation Board NCP1014STBUCGEVB Non-isolated Positive Output Buck AC/DC Converter
Reference Design TND329/D 5 W CCCV AC-DC Adapter GreenPoint® Reference Design
Reference Design TND371/D Offline LED Driver Intended for ENERGY STAR® Residential LED Luminaire Appss - GreenPoint® Ref Design
Design Tool — NCP1027 Design Worksheet
Application Note AND8241/D A 5 V/2 A Standby Power Supply for INTEL Compliant ATX Applications
Application Note AND8262/D 8 W DVD Power Supply with NCP1027
Application Note AND8296/D Increasing the Efficiency of Low Power Converters with Resonant Snubbers
Application Note AND8334/D Understanding Loop Compensation with Monolithic Switchers
Evaluation Board NCP1027ATXGEVB NCP1027 5.0 V/2.0 A Standby ATX Power Supply Evaluation Board
Evaluation Board NCP1028LEDGEVB NCP1028 720 mA, 18 V LED Driver
NCP1027/28
Design Note DN06006/D NCP1027: 1 A, 12 W Constant Current Off-Line LED Driver
Design Note DN06012/D NCP1027: 10 W, 24 V / 5 V Off-Line Power Supply
Design Note DN06021/D NCP1027: 16 W, 12 Vdc Modem Power Supply
Reference Design TND313/D 300 W, 80 PLUS Compliant ATX Reference Design Documentation Package
Reference Design TND316/D 220 W LCD TV Power Supply Reference Design Featuring NCP1396 and NCP1605 Documentation
Reference Design TND321/D 220 W LCD TV Power Supply Reference Design Featuring NCP1395 and NCP1653 Documentation
Reference Design TND330/D 16 W xDSL Modem AC-DC Adapter Reference Design
Evaluation Board NCP1055GEVB NCP1055 5.0 V / 2.0 A Flyback Converter Evaluation Board
Application Note AND8099/D 5.0 V, 2.0 A Flyback Converter
Application Note AND8098/D Low-Cost 100 mA High-Voltage Buck and Buck-Boost Using NCP1052
NCP1050-55
Design Note DN06053/D NCP1055: Simple, 3 W, Non-isolated Bias Supply
Design Note DN06028/D NCP1055: 7 W, non-isolated buck ac-dc converter
Design Tool NCP105X DWS.XLS NCP105x Design Worksheet
ON Semiconductor Page 11
Supporting Materials — AC-DC Controllers and Regulators
Device Type Designator Description
Design Tool QR IND CALC Spreadsheet to calculate QR power supplies inductor’s value
Design Tool QR DESIGN AID Spreadsheet to help in the design of a QR power supply
Application Note AND8129/D 30 W Power Supply Operating in A Quasi-Square Wave Resonant Mode
Application Note AND8145/D A 75 W TV Power Supply Operating in Quasi-square Wave Resonant Mode Using NCP1207 Controller
Application Note AND8112/D A Quasi-Resonant SPICE Model Eases Feedback Loop Designs
NCP1308
Application Note AND8089/D Determining the Free-Running Frequency for QR Systems
Reference Design TND334/D 50 W STB Power Supply Reference Design
Reference Design TND332/D 8 W DTA Power Supply Reference Design
Design Note DN06008/D NCP1308: +/- 18 V Dual Output Power Supply
Design Note DN06014/D NCP1308: 170 Vdc output, quasi-resonant power supply
Design Tool QR IND CALC Spreadsheet to calculate QR power supplies inductor’s value
Design Tool QR DESIGN AID Spreadsheet to help in the design of a QR power supply
Evaluation Board NCP1337ADAPGEVB NCP1337 60W 12V/5A Adapter Evaluation Board
Application Note AND8246/D A 160 W CRT TV Power Supply Using NCP1337
NCP1337 Application Note AND8112/D A Quasi-Resonant SPICE Model Eases Feedback Loop Designs
Application Note AND8266/D Designing NCP1337
Application Note AND8089/D Determining the Free-Running Frequency for QR Systems
Reference Design TND315/D 160 W CRT TV Power Supply Reference Design Documentation
Reference Design TND318/D 60 W Adapter Reference Design Documentation
Design Tool — NCP1338 QR Power Supply Design Worksheet (Simple & Complex)
NCP1338 Reference Design TND315/D 160 W CRT TV Power Supply Reference Design
Reference Design TND318/D 60 W Monitor AC-DC Adapter Reference Design
Design Tool — NCP1351 Design Worksheet
Evaluation Board NCP1351ADAPGEVB NCP1351 57 W Adapter Evaluation Board
Evaluation Board NCP1351PRINTGEVB NCP1351 40 W Printer Evaluation Board
Evaluation Board NCP1351LEDGEVB Universal Input 20 W LED Ballast
Application Note AND8278/D NCP1351 Evaluation Board Printer Power Supply
NCP1351
Application Note AND8263/D NCP1351 Evaluation Board, 19 V - 3 A Adaptor
Application Note AND8280/D NCP1351 Modeling Using the PWM Switch Technique
Application Note AND8288/D NCP1351 Evaluation Board, a 12 V / 2 A Full DCM Adapter
Reference Design TND320/D 40 W Printer Power Supply Reference Design Documentation
Design Note DN06040/D NCP1351: Universal Input, 20 W, LED Ballast
Design Tool QR IND CALC Spreadsheet to calculate QR power supplies inductor’s value
Design Tool QR DESIGN AID Spreadsheet to help in the design of a QR power supply
NCP1377
Application Note AND8112/D A Quasi-Resonant SPICE Model Eases Feedback Loop Designs
Application Note AND8089/D Determining the Free-Running Frequency for QR Systems
Application Note AND8431/D Designing a Quasi-Resonant Adapter Driven by the NCP1380
NCP1379/80
Evaluation Board NCP1380EVB Performances of a Quasi-Resonant Adapter Driven by the NCP1380
Design Tool QR IND CALC Spreadsheet to calculate QR power supplies inductor’s value
Design Tool QR DESIGN AID Spreadsheet to help in the design of a QR power supply
Evaluation Board NCP1381ADAPEVB NCP1381 120 W Adapter Evaluation Board
NCP1381/82 Application Note AND8112/D A Quasi-Resonant SPICE Model Eases Feedback Loop Designs
Application Note AND8089/D Determining the Free-Running Frequency for QR Systems
Application Note AND8240/D Designing NCP1381 in High Power AC-DC Adapters
Application Note AND8260/D NCP1381 Demonstration Board: 120 W Notebook Adapter
Design Tool — NCP1395 Design Worksheet
Evaluation Board NCP1395LLCGEVB NCP1395 240 W LLC Evaluation Board
NCP1395 Application Note AND8255/D A Simple DC SPICE Model for the LLC Converter
Application Note AND8257/D Implementing a Medium Power AC-DC Converter with the NCP1395
Reference Design TND321/D 220 W LCD TV Power Supply Reference Design Featuring NCP1395 and NCP1653 Documentation
Design Tool — NCP1396 Design Worksheet
Application Note AND8255/D A Simple DC SPICE Model for the LLC Converter
Application Note AND8293/D Implementing an LCD TV Power Supply with NCP1396A, NCP1605, and NCP1027
NCP1396
Reference Design TND316/D 220 W LCD TV Power Supply Reference Design Featuring NCP1396 and NCP1605 Documentation
Reference Design TND359/D 255 W, 80 PLUS® Silver Certified ATX Power Supply GreenPoint® Reference Design
Application Note AND8311/D Understanding the LLC Structure in Resonant Applications
Application Note AND8311/D Understanding the LLC Structure in Resonant Applications
NCP1397
Application Note AND8255/D A Simple DC SPICE Model for the LLC Converter
EFFICIENCY (%)
VIN = 12 V
80
• Various topologies including buck, boost, buck/boost, 75
and inverting 70
DC-DC Regulators
Vin (V) Frequency Output Current
Device Min Max Topology (kHz) (A) Package
LM2574 4.75 40 Buck 52 0.5 D2PAK, TO-220
LM2594 4.75 40 Buck 150 0.5 SOIC-8, PDIP-8
LM2575 4.75 40 Buck 52 1.0 D2PAK, TO-220
LM2595 4.75 40 Buck 150 1.0 D2PAK, TO-220
NCP1030/31 10 200 Buck, Boost 300 0.5 / 1.0 Micro8
CS51411/2/3/4 4.5 40 Buck 260 1.5 SOIC-8, DFN-18
NCP3063 3 40 Buck, Boost, Inverting, Buck/Boost up to 250 1.5 DFN-8, SOIC-8, PDIP-8
NCP3064 3 40 Buck, Boost, Inverting, Buck/Boost up to 250 1.5 DFN-8, SOIC-8, PDIP-8
NCP3065 3 40 Buck, Boost, Inverting, Buck/Boost up to 250 1.5 DFN-8, SOIC-8, PDIP-8
NCP3066 3 40 Buck, Boost, Inverting, Buck/Boost up to 250 1.5 DFN-8, SOIC-8, PDIP-8
MC34063A 3 40 Buck, Boost, Inverting, Buck/Boost up to 100 1.5 DFN-8, SOIC-8, PDIP-8
NCP1595 4 5.5 Buck 1200 1.5 DFN-6
CS5171/2/3/4 2.7 30 Boost 280/560 1.5 SOIC-8
NCP1597 4 5.5 Buck 1200 2.0 DFN-6
NCP1599 2.7 5.5 Buck 1200 3.0 DFN-6, DFN-10
NCP3155 4.7 24 Buck 500 / 1000 3.0 SOIC-8
NCP3170 4.5 18 Buck 500 / 1000 3.0 SOIC-8
MC34166 7.5 40 Step-up/Step-down 72 3.0 D2PAK, TO-220
LM2576 4.75 40 Buck 52 3.0 D2PAK, TO-220
LM2596 4.75 40 Buck 150 3.0 D2PAK, TO-220
MC34163 2.5 40 Buck, Boost, Inverting, Buck/Boost up to 100 3.4 SOIC-16, PDIP-16
NCV33163 2.5 60 Buck, Boost, Inverting, Buck/Boost up to 100 3.4 SOIC-16, PDIP-17
NCP3163 2.5 40 Buck, Boost, Inverting, Buck/Boost up to 300 3.4 SOIC-16WB, DFN-18
MC34167 7 40 PWM Step-down 72 5.0 D2PAK, TO-220
NCP3101C 2.7 18 Buck 275 6.0 QFN-40
NCP3102C 2.7 18 Buck 275 10.0 QFN-40
ON Semiconductor Page 13
DC-DC Controllers
Vin (V) Frequency Control
Device Min Max Isolated (kHz) Mode Package
CS5124 7.7 75 Yes 400 Current SOIC-8
CS51022 3.3 72 Yes 200 - 1000 Current SOIC-16, TSSOP-16
CS51031 4.5 16 No 200 - 700 Hysteretic SOIC-8
CS51221 3.3 72 Yes 200 - 1000 Voltage SOIC-16, TSSOP-16
NCP1034 8 100 No 25 to 500 Voltage SOIC-16
NCP1216A 10 500 Yes 65, 100, 133 Current SOIC-8, PDIP-7
NCP1217A 10 500 Yes 65, 100, 133 Current SOIC-8, PDIP-7
NCP1294 3.3 72 Yes 200 - 1000 Voltage SOIC-16, TSSOP-16
NCP1587 4.5 13.2 No 275 Voltage SOIC-8
NCP1589 4.5 13.2 No 300/600 Hysteretic SOIC-8
NCP3011 4.5 28 No 400 Voltage TSSOP-14
NCP3020A/B 4.5 28 No 300/600 Voltage SOIC-8
NCP3030 4.7 28 No 1200/2400 Voltage SOIC-8
NCP5424 10.8 13.2 No 150 - 600 Voltage SOIC-16
SG3525 8 35 No 100 - 400 Voltage SOIC-16, PDIP-16
TL494 7 40 No 40 - 200 Voltage SOIC-16, PDIP-16
TL594 7 40 No 40 - 300 Voltage SOIC-16, PDIP-16, TSSOP-16
ON Semiconductor Page 15
Linear Voltage Regulators
500
IOUT = 1.0 A,
300
• Output currents ranging from 80 mA to 3 A VOUT = 2.5 V
250
• Power Supply Rejection Ratios as high as 90 dB
200 VOUT = 3.3 V
• Ultra-fast transient response of less than 1 ms
150 VOUT = 5.0 V
• Ultra-low Iq and Ignd of 2.5 mA 100
−40 −15 10 35 60 85 110 135
TA, AMBIENT TEMPERATURE (°C)
RDS(ON) mΩ
VDS VGS VGS = 10V VGS = 4.5V Qg Qgd RG
Device Configuration Polarity (V) (V) Typ Typ (nC) (nC) (Ω) Package
NTMFS4933N Single N 30 20 0.9 1.5 62.1 10.1 1.1 SO8-FL
NTMFS4897NF Int. Schottky N 30 20 1.3 2.0 40.2 13.4 0.7 SO8-FL
NTMFS4934N Single N 30 20 1.5 2.2 34 8.1 0.6 SO8-FL
NTMFS4833N Single N 30 20 1.3 2.3 39 17 1.0 SO8-FL
NTMFS4852N Single N 30 20 1.6 2.4 34.3 11.3 1.0 SO8-FL
NTP6410AN Single N 100 20 11 — 120 57 2.4 TO-220, D2PAK
NTP6411AN Single N 100 20 12.7 — 100 47 3.1 TO-220, D2PAK
Features Forward
• Low RDS(on) for low conduction loss Flyback
Push Pull
• Integrated Schottky for low diode loss 48 V Half Bridge Vout
Full Bridge
• Thermally enhanced SO-8 FL for applica-
tions requiring heatsinking
RDS(ON) mΩ
VDS VGS VGS = 10V VGS = 4.5V Qg Qgd Ciss Cjss RG
Device Configuration Polarity (V) (V) Typ Typ (nC) (nC) (pF) (pF) (Ω) Application Package
NTMFS4897NF Int. Schottky N 30 20 1.3 2.0 40.2 13.4 5660 495 0.7
NTMFS4898NF Int. Schottky N 30 20 2.2 3.4 25 8.6 3233 310 1.4
NTMFS4899NF Int. Schottky N 30 20 3.9 6.0 12.2 4.6 1600 165 1.5
NTMFS4934N Single N 30 20 1.5 2.2 34 8.1 5505 90 1.6 SO8-FL
NTMFS4833N Single N 30 20 1.3 2.3 39 17 5600 650 1.0
NTMFS4852N Single N 30 20 1.6 2.4 34.3 11.3 4970 427 1.0 Secondary
NTMFS4935N Single N 30 20 2.7 3.7 22 3.0 3579 39 1.1 Synchronous
NTMFS4825NFE Single N 30 20 1.3 2.0 40.2 13.4 5660 495 0.7
Thermally
NTMFS4922NE* Single N 30 20 1.5 2.2 34 8.1 5505 90 0.6 Enhanced SO8-FL
NTMFS4923NE Single N 30 20 2.7 3.7 22.9 3.8 3579 39 1.1
NTTFS4932N Single N 30 20 2.5 3.6 20 3.3 3111 42 1.1
NTTFS4937N Single N 30 20 3.4 4.9 15.7 1.9 2540 26 1.1 m8-FL
NTTFS5820NL Single N 60 20 10.1 13 28 8.0 1462 96 0.6
NTMFS5844NL Single N 60 20 10.2 13 20 8.0 1460 96 0.6 Primary SO8-FL
NTTFS5826NL Single N 60 20 19 25 16 3.9 850 50 1.5 m8-FL
* Pending 2011.
ON Semiconductor Page 17
MOSFETs for Power Conversion
Non-Isolated Topology “Buck” DC-DC
Control
Features
• Low RDS(on) for low conduction loss
• Integrated Schottky for enhanced light load efficiency Sync
Vin Cin Cout Vout
• Thermally enhanced SO-8 FL for applications requiring PWM
heatsinking Controller
RDS(ON) mΩ
VDS VGS VGS = 10V VGS = 4.5V Qg Qgd Ciss Cjss RG
Device Configuration Polarity (V) (V) Typ Typ (nC) (nC) (pF) (pF) (Ω) Application Package
NTMFS4897NF Int. Schottky N 20 1.3 2 40.2 13.4 5660 495 0.7 Synchronous Side
NTMFS4898NF Int. Schottky N 20 2.2 3.4 25 8.6 3233 310 1.4 Synchronous Side
NTMFS4899NF Int. Schottky N 20 3.9 6 12.2 4.6 1600 165 1.5 Synchronous Side
NTMFS4934N Single N 20 1.5 2.2 34 8.1 5505 90 0.6 Synchronous Side
NTMFS4833N Single N 20 1.3 2.3 39 17 5600 650 1 Synchronous Side
NTMFS4852N Single N 20 1.6 2.4 34.3 11.3 4970 427 1 Synchronous Side
NTMFS4935N Single N 20 2.7 3.7 22 3 3579 39 1.1 Synchronous Side
SO8-FL
NTMFS4936N Single N 20 2.9 3.9 19 2.4 3044 39 1 Synchronous Side
NTMFS4937N Single N 20 3.5 5 15.9 2.2 2516 25 1.1 Synchronous Side
NTMFS4939N Single N 20 4.1 6 12.8 2.5 1954 27 1.1 Synchronous Side
NTMFS4925N Single N 20 4 6.4 11.3 2.5 1325 158 0.8 Control Side
NTMFS4921N Single N 20 5.3 8.6 10.7 2.5 1400 136 1.1 Control Side
NTMFS4926N Single N 20 4.8 7.8 8.5 2.5 1058 126 0.9 Control Side
NTMFS4927N Single N 30 20 5.4 8.9 8.3 2.5 969 115 0.9 Control Side
NTMFS4825NFE Single N 20 1.3 2 40.2 13.4 5660 495 0.7 Synchronous Side
NTMFS4922NE* Single N 20 1.5 2.2 34 8.1 5505 90 0.6 Synchronous Side
NTMFS4923NE Single N 20 2.7 3.7 22.9 3.8 3579 39 1.1 Synchronous Side Thermally
Enhanced
NTMFS4826NE Single N 20 4.3 6.6 20 4.5 1850 170 0.9 Control Side SO8-FL
NTMFS4925NE* Single N 20 4.8 7.8 8.5 2.5 1058 126 0.9 Control Side
NTMFS4926NE* Single N 20 5.4 8.9 8.3 2.5 969 115 0.9 Control Side
NTTFS4932N Single N 20 2.5 3.6 20 3.3 3111 42 1.1 Synchronous Side
NTTFS4937N Single N 20 3.4 4.9 15.7 1.9 2540 26 1.1 Synchronous Side
NTTFS4939N Single N 20 4.1 6 12.4 1.8 1979 20.2 1.1 Synchronous Side
NTTFS4941N Single N 20 4.8 7 10.1 1.3 1619 18 0.7 Synchronous Side m8-FL
NTTFS4928N Single N 20 5.7 9.2 8.3 3.3 969 115 0.9 Control Side
NTTFS4929N Single N 20 8.8 12.7 13 4 920 175 0.6 Control Side
NTTFS4930N Single N 20 15 22.7 4.6 2.3 476 91 0.6 Control Side
* Pending 2011.
PFC
Controller
PWM
Isolation Control
ON Semiconductor Page 19
MOSFETs for Power Conversion
Synchronous Rectification MOSFETs
VDS ID VGS Max RDS(on) @ 50% ID Qg Typ
Device (V) (A) (V) (mΩ) (nC) Package
NTD5862N 60 90 20 5.7 82 DPAK
NTD5865N 60 38 20 18 23 DPAK
NTMFS5844NL 60 60 20 12 30 SO-8 FL
NTMFS5832NL 40 110 20 4.2 53 SO-8 FL
NTMFS5834NL 40 74 20 9.3 24 SO-8 FL
MOSFET Drivers
Features
• Drives high voltage power MOSFETs and IGBTs, • High voltage range, up to 600 V
provides two outputs • Robust devices with dV/dt immunity of ±50 V/ns
• Suitable for multiple topologies like half-bridge, • Pin to pin compatible with industry standards
asymmetrical half-bridge, active clamp, full bridge
MOSFET Drivers
Device Function Type No of Drivers Package
NCP5104 Single Input High and Low Side Power MOSFET Driver Half-Bridge 2 SOIC-8, PDIP-8
NCP5111 Single Input Half-Bridge Power MOSFET or IGBT Driver Half-Bridge 2 SOIC-8, PDIP-8
NCP5106A/B Dual Inputs High Voltage High and Low-Side MOSFET or IGBT Driver Half-Bridge 2 SOIC-8, PDIP-8
NCP5304 Dual Inputs High Voltage High and Low-Side MOSFET or IGBT Driver Half-Bridge 2 SOIC-8, PDIP-8
NCP5181 Dual Inputs High Voltage High and Low-Side MOSFET or IGBT Driver Half-Bridge 2 SOIC-8, PDIP-8
Supporting Materials
Device Type Designator Description
Evaluation Board NCP5181BAL36WEVB NCP5181 36 W Ballast Evaluation Board
Application Note AND8244/D A 36 W Ballast Application with the NCP5181
NCP5181
Application Note AND8257/D Implementing a Medium Power AC-DC Converter with the NCP1395
Reference Design TND321/D 220 W LCD TV Power Supply Reference Design Featuring NCP1395 and NCP1653 Documentation
Evaluation Board NCP5104BA36WGEVB NCP5104 36 W Ballast Evaluation Board
NCP5104
Application Note AND8312/D A 36 W Ballast Application with NCP5104
Evaluation Board NCP5106BA36WGEVB A 36 W Ballast Application with NCP5106B Evaluation Board
NCP5106A/B
Application Note AND8295/D A 36 W Ballast Application with NCP5106B
89.5
89.0
88.5
LVFR Features 88.0
• Low Vf 87.5
Efficiency (%)
87.0
• High operating temperature 86.5
capabilities 86.0
83.5
83.0
12.5 25.0 37.5 50.0 62.5 75.0 87.5 100.0
Rectifiers
VRRM VF Max IR Max IO IFSM
Device (V) (V) (uA) (A) (A) Package
MBRF10H150CT 150 0.69 45 10 150 TO-220 FULLPAK
MBR20H150CT 150 0.68 50 20 180 TO-220
MBRF20H150CT 150 0.68 50 20 180 TO-220 FULLPAK
MBR30H150CT 150 0.73 60 30 200 TO-220
MBRF30H150CT 150 0.73 60 30 200 TO-220 FULLPAK
MBR10H100CT 100 0.61 3.5 10 180 TO-220
MBR16100CT 100 0.60 100 16 150 TO-220
MBR20100CT 100 0.75 100 20 150 TO-220
MBR20H100CT 100 0.64 4.5 20 250 TO-220
NTST30100S 100 0.78 1000 30 250 TO-220
MBRF20100CT 100 0.75 150 20 150 TO-220 FULLPAK
MBRF20H100CT 100 0.64 4.5 20 250 TO-220 FULLPAK
MBR30H100CT 100 0.67 4.5 30 250 TO-220
MBRF30H100CT 100 0.67 4.5 30 250 TO-220 FULLPAK
MBR41H100CT 100 0.67 10 40 350 TO-220
MBRB41H100CT-1 100 0.67 10 40 350 I2PAK
MBR60H100CT 100 0.72 10 60 350 TO-220
MBR2080CT 80 0.75 100 20 150 TO-220
MBR20L80CT 80 0.61 500 20 175 TO-220
MBRF20L80CT 80 0.61 500 20 175 TO-220 FULLPAK
MBR10L60CT 60 0.49 220 10 200 TO-220
MBRF10L60CT 60 0.49 220 10 200 TO-220 FULLPAK
MBR2060CT 60 0.85 150 20 150 TO-220
MBR20L60CT 60 0.54 380 20 240 TO-220
MBRF2060CT 60 0.75 150 20 150 TO-220 FULLPAK
MBRF20L60CT 60 0.54 380 20 240 TO-220 FULLPAK
Note: All VF data is taken at rated current, 125°C ambient. All IR data is taken at rated voltage, 25°C, per leg.
ON Semiconductor Page 21
Rectifiers
VRRM VF Max IR Max IO IFSM
Device (V) (V) (uA) (A) (A) Package
MBR30H60CT 60 0.56 300 30 260 TO-220
MBR30L60CT 60 0.57 350 30 240 TO-220
MBRF30H60CT 60 0.56 300 30 260 TO-220 FULLPAK
MBRF30L60CT 60 0.57 350 30 240 TO-220 FULLPAK
MBRB30H60CT-1 60 0.56 300 30 260 I2PAK
MBR40L60CT 60 0.58 550 40 240 TO-220
MBR1545CT 45 0.57 100 15 150 TO-220
MBR2045CT 45 0.57 100 20 150 TO-220
MBR20L45CT 45 0.47 500 20 180 TO-220
MBRF2045CT 45 0.57 100 20 150 TO-220 FULLPAK
MBRF20L45CT 45 0.47 500 20 180 TO-220 FULLPAK
MBR2545CT 45 0.57 200 30 150 TO-220
MBRF2545CT 45 0.62 200 25 150 TO-220 FULLPAK
MBR3045ST 45 0.57 200 30 150 TO-220
MBRB3045CT-1 45 0.57 200 30 150 I2PAK
MBR30L45CT 45 0.44 650 30 190 TO-220
MBRF30L45CT 45 0.44 650 30 190 TO-220 FULLPAK
MBR40L45CT 45 0.48 1200 40 200 TO-220
MBR60L45CT 45 0.53 1200 60 200 TO-220
MBR2030CTL 30 0.40 5000 20 150 TO-220
MBR30H30CT 30 0.40 800 30 260 TO-220
MBRB30H30CT-1 30 0.40 800 30 260 I2PAK
Note: All VF data is taken at rated current, 125°C ambient. All IR data is taken at rated voltage, 25°C, per leg.
Voltage References
Features
• Provides accurate reference voltage from • Low dynamic impedance, low noise and
0.9 V to 2.5 V stable operation over time and temperature
• Tight voltage tolerances from 0.4% to 3% • Available in a wide range of packages,
• Output voltage range up to 36 V including surface mount and through hole
Voltage References
Device Type Tolerance Package
LM285 Fixed 1%, 1.5% SOIC-8, TO-92
LM385 Fixed 1%, 1.5%, 2%, 3% SOIC-8, TO-92
LM385B Fixed 1%, 1.5% SOIC-8, TO-92
TL431 Adjustable 2.2% SOIC-8, PDIP-8, Micro8, TO-92
TL431A Adjustable 1.0% SOIC-8, PDIP-8, Micro8, TO-92
TL431B Adjustable 0.4% SOIC-8, PDIP-8, Micro8, TO-92
Tutorials
Document Title Document ID
AD2 - Adapter Less than 75 W TND355/D
ADAP1 - Fixed Frequency Adapter with Very Low Power Consumption TND376/D
ADAP2 - QR Adapter Design TND377/D
ATX - Designing High-Efficiency ATX Solutions TND356/D
Achieving High Power Density Designs TND325/D
AiO - 200 W Power Supply for All-in-One PC TND383/D
F2S - 2 Switch Forward Converter TND378/D
FB1 - DC-DC Converters Feedback and Control TND352/D
FB2 - The TL431 in Switching Power Supplies TND381/D
HB - Half-Bridge Drivers, a Transformer-Based Solution or an All-Silicon Drive TND379/D
LCD - AC-DC Power Architecture in LCD TV TND353/D
MAG - Magnetics in Switched-Mode Power Supplies TND350/D
MOF - Multi-Output Flyback Off-Line Power Supply TND351/D
OVR - Overview of Efficient Power Supply Solutions TND357/D
PFC1 - Advanced Power Factor Correction TND344/D
PFC2 - Compensating a PFC Stage TND382/D
QR - Analysis and Design of Quasi-Resonant Converters TND348/D
SIM - Simulating Power Supplies with SPICE TND349/D
SMPS Overview TND342/D
SMPS Topologies TND343/D
Standby Power Reduction Techniques TND324/D
TEL - DC-DC Telecom and Networking Solutions TND347/D
iPFC - Interleaved Power Factor Controller TND380/D
ON Semiconductor Page 23
Sales and Design Assistance from ON Semiconductor
ON Semiconductor Distribution Partners AMERICAS REP FIRMS
AMSC Co. www.amsc.co.jp (81) 422 54 6622 Alabama Huntsville e-Components (256) 533-2444
Arrow Electronics www.arrow.com (800) 777-2776 Brazil Countrywide Ammon & Rizos (+55) 11-4688-1960
Avnet www.em.avnet.com (800) 332-8638
California Bay Area L2 (408) 433-9388
Digi-Key www.digikey.com (800) 344-4539
Canada Eastern Canada Astec (905) 607-1444
EBV Elektronik www.ebv.com/en/locations.html (49) 8121 774-0
Western Canada Sifore (503) 977-6267
Fuji Electric Co. www.fujiele.co.jp (81) 3 3814 1411
Future & FAI Electronics www.futureelectronics.com/contact 1-800-FUTURE1 (388-8731)
Connecticut Statewide Genesis Associates (781) 270-9540
KH Electronics Inc. www.khelec.com/kor (82) 42 471 8521 Florida Statewide e-Components (888) 468-2444
Marubun www.marubun.co.jp (81) 3 3639 5630 Georgia Atlanta e-Components (888) 468-2444
Mitsui Electronics Inc. www.btel.co.jp (81) 3 6403 5900 Illinois St. Charles (South) Stan Clothier Company (847) 781-4010
Mouser Electronics www.mouser.com (800) 346-6873 Palatine (North) HLC Ltd. (847) 358-6500
Newark/Farnell www.farnell.com/onsemi (800) 4-NEWARK Indiana Fishers Bear VAI (317) 570-0707
Promate Electronic Co. www.promate.com.tw (886) 2 2659 0303 Iowa Cedar Rapids Essig & Associates (319) 363-8703
Segyung Britestone Co. www.britestone.com (82) 2 3218 1511
Kansas Overland Park Stan Clothier Company (913) 894-1675
Serial Microelectronics, HK www.serialsys.com.hk (852) 2790 8220
Maryland Columbia Third Wave Solutions (410) 290-5990
Taewon Inc. www.taewon.net (82) 2 6679 9000
Massachusetts Burlington Genesis Associates (781) 270-9540
Tokyo Electron Device Co. hwww.teldevice.co.jp (81) 45 443 4000
Mexico Countrywide Ammon & Rizos (+55) 11-4688-1960
World Peace Industries Co. www.wpi-group.com (852) 2365 4860
WT Microelectronics Co. www.wtmec.com (852) 2950 0820
Michigan St. Joseph Bear VAI (440) 526-1991
Yosun Electronics www.yosun.com.tw (886) 2 2659 8168 Minnesota Eden Prairie Stan Clothier Company (952) 944-3456
Missouri St. Charles Stan Clothier Company (636) 916-3777
New Jersey Statewide S.J. Metro (516) 942-3232
INTERNATIONAL New York Binghamton TriTech - Full Line Rep (607) 722-3580
GREATER CHINA Beijing 86-10-8518-2323 Jericho S.J. Metro (516) 942-3232
Chengdu 86-28-8678-4078
Rochester TriTech - Full Line Rep (585) 385-6500
Hong Kong 852-2689-0088
Shenzhen 86-755-8209-1128 North Carolina Raleigh e-Components (888) 468-2444
Shanghai 86-21-5131-7168 Ohio Brecksville Bear VAI Technology (440) 526-1991
Taipei, Taiwan 886-2-2377-9911 Oregon Portland SiFore Technical (503) 977-6267
FRANCE Paris 33 (0)1 39-26-41-00 Puerto Rico Countrywide e-Components (888) 468-2444
GERMANY Munich 49 (0) 89-93-0808-0
Washington Bellevue SiFore Technical (425) 990-4701
ISRAEL Raanana 972 (0) 9-9609-111
ITALY Milan 39 02 9239311 Wisconsin Eden Prairie (NW) Stan Clothier Company (608) 882-0686
JAPAN Tokyo 81-3-5773-3850 Milwaukee (SE) HLC Ltd. (847) 358-6500
KOREA Seoul 82-2-2190-3500
MALAYSIA Penang 60-4-226-9368
SINGAPORE Singapore 65-6391-1260
SLOVAKIA Piestany 421 33 790 2450
UNITED KINGDOM Slough 44 (0) 1753 70 1676
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee
regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the
body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended
or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any
claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is
subject to all applicable copyright laws and is not for resale in any manner.