through thick and coarse. The USM 23LF is designed for testing materials with high sound attenuation or a coarse-grained structure. This portable instrument is therefore equipped with a powerful square-wave pulser. With the USM 23LF you inspect for example: • graphite electrodes, grinding wheels, brake linings • bricks, natural stones, refractories, stone sculptures • concrete, precast concrete parts • plastic foams such as rotor blades / composite panels, rubber • stocks of trees, wooden poles, bonded beams, chipboards • coarse-grained cast materials A large number of special probes provided with frequencies from 50 kHz to 1 MHz are available for the applications in the lower-fequency range: Probe selection With state-of-the-art technology for You can use these probes in through- Type Order No. kHz Dia. Cable your field applications. transmission or in pulse-echo mode, B0,05N 67039 50 20 PKTL2 As all instruments from the proven with one or two probes in the dual B0,05NN 67038 50 20 PKTL2 USM family, the USM 23LF is mode, depending on the sound attenu- B0,1N 58630 100 20 PKTL2 extremely powerful in spite of its small ation/scattering. B0,1NN 58769 100 20 PKTL2 size and the fact that it’s portable. It’s K0,1G 58380 100 34 PKTL2 G0,2R1 58723 200 56 PKTL2 equipped with a state-of-the-art LCD G0,2RC75 58976 200 75 PKTL2 providing: high resolution and optimum K0,25G 58381 250 34 PKTL2 readability – even in the brightest G0,25G 67422 250 34 PKTL2 sunlight, at an unfavorable viewing K0,5S 56126 500 34 PKLL2 angle, or from a long distance. K0,5SM 66118 500 28 PKLL2 G0,5G 66568 500 34 PKLL2 B0,5K/E 65611 500 8 PKLL2 B0,5K/S 65612 500 8 PKLL2 K1S 56125 1000 34 PKLL2 K1SC 59074 1000 24 PKLL2