Beruflich Dokumente
Kultur Dokumente
Condensing Unit
Split Water-Cooled
Condensing Unit
7,000-60,000 Btu/h
WTK Series 50 Hz
Human Comfort Solutions
Improved Cash Management Low First Cost Space Saving
• Factory packaging and testing • Factory packaged controls reduce • Compact in size.
reduce field labor and installation
field labor, installation time, and • Unit can be installed in a very limited
risk and improve system reliability.
costs. space.
• Phased equipment start-up matches
building lease-up. • Minimize need and cost for fire A New Standard For The
• Short construction cycles maximize dampers and air shafts. Industry
cash flow. • Large equipment rooms and
Trane sets new standards for
• Requires less sophisticated penthouses are not needed.
• Serviceability
maintenance than built-up systems. • Condenser water is available on
• Installability
each floor for tenant computer
Tenant Satisfaction • Reliability
systems.
• Enjoy the benefits of individual • Flexibility of application in their
tenant metering since buildings can Economical Operation commercial air conditioning
often be occupied on a one tenant • Area-by-area system results in products.
per unit basis. energy saving since only air These products enhance Trane’s
• After-hour operational cost savings conditioners on areas requiring reputation for quality in air
are tremendous since units can be cooling are needed. conditioning equipments.
deactivated when not required. • Especially economical after normal
• Complete HVAC system on each building occupancy hours. Quality Control
area minimized tenant • Annual system energy consumption All of Trane products have inspected
inconvenience during routine comparable to central chilled water in assembly line. After completion, the
maintenance. system but with significant energy condensing unit has been evacuated,
consumption reduction during leak tested and holding charged with
partial occupancy and after-hours. refrigerant to protect rust and dirt.
This is to assure that every parts will
work in the right condition and at the
highest efficiency.
Figure 1- System Diagram of WTK
Cooling Tower
MCD
WTK
MCD
WTK
WTK
MCX
400 109
SUCTION LINE
49
0
40 WATER OUTLET
WATER INLET
50.8
LIQUID LINE
520
SUCTION LINE
POWER SUPPLY
400
179
Ø5/8 In.
WATER OUTLET
477.6
477.6
43
432.6
412.6
358.2
50.8
302.2
293.2
POWER SUPPLY
Ø3/4 In.
232.2
51.1
200.4
0
50
69
WTK507-518 WTK524-060
Table 3- Dimensional Data
Export Market Thailand Market
Model Liquid Line Suction Line Liquid Line Suction Line
(in) (in) (in) (in)
WTK507-509 1/4 3/8 1/4 3/8
WTK512-518 1/4 1/2 3/8 5/8
WTK524-530 3/8 5/8 3/8 5/8
WTK536 3/8 3/4 3/8 3/4
WTK048-060 3/8 1 1/8 1/2 7/8
MS-SLB024-EN 3
Mechanical Specifications
Condensing Section Fan Coil Section
The Trane Split water-Cooled Convertible Air Handler
condensing units are designed for MCX Series
commercial and industrial applications.
The MCX-GB series is the compact
Trane split water-cooled condensing
design with 3-convenience
unit can be matched with a variety of
installation-floor, low wall, and ceiling
air handlers in either convertible,
types. Fashionable adjustable
ceiling, or ducted air handlers. These
discharge grille and decorative return
units may be arranged to meet almost
air grilles are modern and elegant
any space to make them suitable for
outlook. Unit panels are internally
every application.
acoustically insulated with closed cell
elastomeric insulator for quiet opera-
Cabinet tion and healthy indoor air quality.
Unit panels are fabricated of MCX
heavy-gauge steel and finished with Ceiling Air Handler
a polyester powder painting and Model MCD-AA and MCD-EB air
weather-resistant baked enamel finish. handler are designed for horizontal
Unit surface has been tested 500 hours concealed ceiling applications,
in salt spray test. Condenser water commonly used within the closets of
inlet/outlet and electrical wiring holes hotels, motels and apartment.
are provided. Base drain is a 3/4 -inch Standard features include triple
female connection. protection drain pan (galvanized steel,
polystyrene foam, and plastic)
High Efficiency Compressor providing maximum insulation and
Special low-friction valve ports and water integrity. Servicing is made
rubbing surfaces allow same capacity simple because the motor-blower MCD---DB/AA
for less electrical power input-higher section is completely removable from
EER. Compressor is externally the coil section.
mounted on isolators to isolate the
operating sound for quiet operation.
Ducted Air Handler
Model MCD-DB is the high static
Refrigerant Circuit
version of the model MCD-AA and
Refrigerant piping for condensing unit
MCD-EB unit. It utilizes the larger
has been designed and installed to
diameter fans operating at low RPM to
absorb vibration. Packed valves make
achieve the increased static pressure
the quicker and easier installation of
requirements needed for limited
refrigerant lines. Easy for refrigerant
distribution ducts. The standard unit
charging with charging port.
has a 1-inch supply air duct collar to
facilitate field connection of the supply MCD---DB W/Plenum
Water-Cooled Condenser ductwork.
Tube in tube condenser is constructed
with copper tubing. Water copper pipe
connections are provided for
condenser water inlet and outlet.
Options
• Hi-Low pressure cut off
(from WTK507 to WTK536)
• 3 minute time delay
(for use with MCD)