Beruflich Dokumente
Kultur Dokumente
MODI UNIVERSITY
Department
OF
Civil Engineering
study and evaluation scheme (2017-18 )
LAB
Evaluation Scheme
S. Period
Sub Code Subject Name Continuous Final Credit
NO Total
Assessment Exam
L T P
1 02BT401 Industrial Sociology 2 0 0 20 30 50 2
Human Value &
2 02BT402 2 0 0 20 30 50 2
Professional Ethics
3 02BTCE403 Engineering Geology 4 0 0 40 60 100 4
Hydraulics & Hydraulic
4 02BTCE405 3 1 0 40 60 100 4
Machines
5 02BTCE406 Geo-informatics 3 1 0 40 60 100 4
6 02BTCE407 Structural Analysis-I 3 1 0 40 60 100 4
SOE008-
7 Departmental Elective-I 4 0 0 40 60 100 4
SOE010
LAB
Hydraulics &Machine 0 0 2 50 50 100 1
1 02BPCE405
lab
Total 21 3 12 1200 30
Evaluation Scheme
S. Period Credit
Sub. Code Subject Name Continuous Final
No. Total
Assessment Exam
L T P
1 03BT501 Engineering Economics 3 0 0 40 60 100 3
2 03BTCE510 Geotechnical Engineering 3 1 0 40 60 100 4
Transportation
3 03BTCE511 3 1 0 40 60 100 4
Engineering-I
4 03BTCE512 Structural Analysis-II 3 1 0 40 60 100 4
Design of Concrete
5 03BTCE513 3 1 0 40 60 100 4
Structure-I
Environmental
6 03BTCE514 3 1 0 40 60 100 4
Engineering-I
LAB
Total 18 5 14 1200 30
Evaluation Scheme
S. Sub. Code Period Continuous Final Total Credit
Subject Name
No
Assessment Exam
L T P
1 03BT601 Industrial Management 3 0 0 40 60 100 3
Design of Concrete
2 03BTCE609 3 1 0 40 60 100 4
Structure-II
Environmental
3 03BTCE610 3 1 0 40 60 100 4
Engineering-II
Construction Technology
4 03BTCE611 4 0 0 40 60 100 4
& Management
Advanced Foundation
5 03BTCE612 3 1 0 40 60 100 4
Design
LAB
Environmental
1 03BPCE610 0 0 2 50 50 100 1
Engineering Lab
Evaluation Scheme
S. Period
Sub Code Subject Name Continuous Final Credit
No. Total
L T P Assessment Exam
Design of Steel
1 04BTCE712 3 1 0 40 60 100 4
Structure
Water Resources
2 04BTCE713 3 1 0 40 60 100 4
Engineering
04BTCE714-
3 Open Elective-I 4 0 0 40 60 100 4
04BTCE717
04BTCE718-
Departmental
4 04BTCE722 3 1 0 40 60 100 4
Elective‐II
04BTCE723- Departmental
5 3 1 0 40 60 100 4
04BTCE726 Elective-III
LAB
1 04BPCE717 Seminar 0 0 4 100 100 200 2
2 04BPCE718 *Industrial Training 0 0 4 100 100 2
3 04BPCE719 **Project 0 0 4 100 100 200 4
4 04BP7010 Seamless Learning 0 0 2 100 100 1
Co-Curricular 2
5 04BP7011 0 0 100 100 1
Activities
Total 16 4 16 1200 30
Evaluation Scheme
S. Period
Sub Code Subject Name Continuous Final Credit
NO. Total
L T P Assessment Exam
Transportation
1 04BTCE812 3 1 0 40 60 100 4
Engineering -II
04BTCE813-
2 Open Elective-II 4 0 0 40 60 100 4
04BTCE816
04BTCE817- Departmental
3 3 1 0 40 60 100 4
04BTCE820 Elective‐IV
04BTCE821- Departmental
4 3 1 0 40 60 100 4
04BTCE824 Elective‐V
LAB
1 04BPCE801 Major Project 0 0 12 300 300 600 12
2 04BP8010 Seamless Learning 0 0 2 100 100 1
Co-Curricular 2
3 04BP8011 0 0 100 100 1
Activities
Total 13 3 16 1200 30
Course objective
The main of this course are to train the students to read and write mathematical proofs;
to develop the student’s mathematical solving skills; and to familiarize the student
with standard concepts in mathematics.
Course Objective:
To provide an introduction to the basic principles and methods of fluid analysis. To
provide practical exercises to strengthen the student’s knowledge of components. To
make students aware about the entrepreneurial opportunities in fluid engineering field.
UNIT - 1
Fluid and continuum, Physical properties of fluids, Rheology of fluids. Pressure-
density-height relationship, manometers, pressure transducers, pressure on plane and
curved surfaces, Centre of pressure, buoyancy, stability of immersed and floating
bodies, fluid masses subjected to linear acceleration and uniform rotation about an
axis.
UNIT - 2
Types of fluid flows: Continuum & free molecular flows. Steady and unsteady,
uniform and non-uniform, laminar and turbulent flows, rotational and irrotational
flows, compressible and incompressible flows, subsonic, sonic and supersonic flows,
sub-critical, critical and supercritical flows, one, two and three dimensional flows,
streamlines, continuity equation for 3D and 1D flows, circulation, stream function and
velocity potential. Dimensional analysis, Buckingham’s Pi theorem, important
dimensionless numbers and their significance,
UNIT - 3
Potential Flow: source, sink, doublet and half-body. Equation of motion along a
streamline and its integration, Bernoulli’s equation and its applications- Pitot tube,
orifice meter, venturimeter and bend meter, Hot-wire anemometer and LDA, notches
and weirs, momentum equation and its application to pipe bends. Similarity Laws:
geometric, kinematics and dynamic similarity, undistorted and distorted model studies.
UNIT - 4
Equation of motion for laminar flow through pipes, Stokes’ law, transition from
laminar to turbulent flow, turbulent flow, types of turbulent flow, isotropic,
homogenous turbulence, scale and intensity of turbulence, measurement of turbulence,
eddy viscosity, mixing length concept and velocity distribution in turbulent flow over
smooth and rough surfaces, resistance to flow, minor losses, pipe in series and parallel,
power transmission through a pipe, siphon, water hammer, three reservoir problems
and pipe networks.
UNIT -5
Boundary layer thickness, boundary layer over a flat plate, laminar boundary layer,
application of momentum equation, turbulent boundary layer, laminar sub-layer,
separation and its control, Drag and lift, drag on a sphere, a two dimensional cylinder,
References:
1. Fox & Donald, “Introduction to Fluid Mechanics” John Wiley &Sons Pvt Ltd,
2. Cengel & Cimbala, ”Fluid Mechanics” TMH, New Delhi.
3. White,F.M. ”Fluid Mechanics” TMH, New Delhi.
4. Munsen et al ,”Fundamental of Fluid Mechanics” Wiley Newyork Ltd
5. Garde, R.J., “ Fluid Mechanics”, SciTech Publications Pvt. Ltd
6. I.H. Shames, “Mechanics of Fluids”, McGraw Hill, Int. Student, Education
Course Objective: To acquaint students with the types, properties, uses, and variety of
materials important in construction. To acquaint students with common building
methods and practices involving those materials. To acquaint students with building
and general construction products and their associated quality, durability, warrantees,
and availability. To familiarize students with the local (and national) built environment
and to promote a greater appreciation of it. To provide students with hands-on,
research, and collaborative activities to vary and deepen the study of construction
materials.
UNIT-1
Classification of building materials, building materials and their performance,
economics of the building materials
Stones, Requirement of good building stone, characteristics of building stones and
their testing. Common building stones. Methods of preservation of stones.
Bricks: Manufacturing process of clay bricks, classification of clay bricks. Properties
of clay bricks, testing methods for clay bricks. Problems of efflorescence & lime
bursting in bricks & tiles.
Gypsum: properties of gypsum plaster, building products made of gypsum and their
uses.
Lime: Manufacture of lime, classifications of limes, and properties of lime.
UNIT– 2
Cement: Raw materials used, Process of Manufacturing, Chemical composition,
compounds formed and their effect on strength, Types of cement, Testing of cement
properties, Uses of cement
Cement Concrete: Constituent materials and their properties, Grades of concrete,
Factors affecting strength, Properties of concrete at fresh and hardened stage, Testing
of concrete, Methods of Curing of concrete.
Pozzolona: Chemical composition and requirements for uses, Natural and Artificial fly
ash, Surkhi (burnt clay pozzolona), rice husk and ash pozzolona, properties and
specifications for use in construction.
UNIT- 4
Doors, Windows Construction details, types of doors and windows and their relative
advantages & disadvantages.
UNIT- 5
Types of roof and roof treatments, Flooring and Their Types, Lintels and Chajja,
Functional efficiency of Buildings.
References
1. S.K. Duggal: Building Materials, New Age International
2. P.C.Varghese: Building Materials, PHI
3. P.C.Varghese: Building Construction, PHI
4. B.C.Punmia: A Text Book of Building Construction, Laxmi Publications,
Delhi.
5. O.H.Koenisberger: “Manual of tropical housing and building” Orient
6. Longman.S.P.Aroraatal.,“ATextBookofBuildingConstruction-
DhanpatRai&Sons,
UNIT – 1
Compound stress and strains: Introduction, normal stress and strain, shear stress and
strain, stresses on inclines sections, strain energy, impact loads and stresses, state of
plane stress, principal stress and strain, maximum shear stress, Mohr’s stress circle,
three dimensional state of stress & strain, equilibrium equations, generalized Hook’s
law, theories of failure
UNIT – 2
Stresses in Beams: Pure Bending, normal stresses in beams, shear stresses in beams
UNIT - 3
Helical and Leaf Springs: Deflection of springs by energy method, helical springs
under axial load and under axial twist (respectively for circular and square cross
sections) axial load and twisting moment acting simultaneously both for open and
closed coiled springs, laminated springs.
Columns and Struts: Buckling and stability, slenderness ratio, combined bending and
direct stress, middle third and middle quarter rules, struts with different end conditions,
Euler’s theory for pin ended columns, effect of end conditions on column buckling,
Ranking Gordon formulae, examples of columns in mechanical equipments and
machines.
UNIT - 4
Thin cylinders & spheres: Introduction, difference between thin walled and thick
walled pressure vessels, Thin walled spheres and cylinders, hoop and axial stresses and
strain, volumetric strain.
Thick cylinders: Radial, axial and circumferential stresses in thick cylinders subjected
to internal or external pressures, compound cylinders, stresses in rotating shaft and
cylinders, stresses due to interference fits.
UNIT - 5
Curved Beams: Bending of beams with large initial curvature, position of neutral axis
for rectangular, trapezoidal and circular cross sections, stress in crane hooks, stress in
circular rings subjected to tension or compression.
Unsymmetrical Bending: Properties of beam cross-section, slope of neutral axis,
stress and deflection in unsymmetrical bending, determination of shear center and
flexural axis (for symmetry about both axis and about one axis) for I-section and
channel section.
Course objective: We will investigate how general psychological knowledge from the
areas of personality, assessment, cognitive and social psychology can be applied and
further developed in multilevel organizational contexts. We will work to form a
coherent picture of how application of psychological knowledge can enhance both
individual productivity and overall organizational functioning.
Unit-1
Introduction to Industrial Psychology – Definitions & Scope. Major influences on
Industrial Psychology- Scientific Management and Human relations -Hawthorne
Experiments. Implications of Industrial Psychology on Modern Industries.
Unit-2
Individual in Workplace
Motivation and Job satisfaction. Stress management. Organizational culture,
Leadership and Group dynamics.
Unit-3
Work Environment & Engineering Psychology-fatigue, Monotony, Boredom.
Accidents and Safety. Job Analysis, Recruitment, Selection and Interview– Reliability
& Validity of recruitment tests.
Unit –4
Selection and Interview– Reliability & Validity of recruitment tests.
Unit –5
Performance Management: Training & Development.
References :
1. Miner J.B. (1992) Industrial/Organizational Psychology. N Y : McGraw Hill.
2. Blum & Naylor (1982) Industrial Psychology. Its Theoretical & Social Foundations
CBS Publication.
3. Aamodt, M.G. (2007) Industrial/Organizational Psychology : An Applied Approach
(5thedition)Wadsworth/Thompson : Belmont, C.A.
4. Aswathappa K. (2008). Human Resource Management (fifth edition) New Delhi :
Tata McGraw Hill.
5. Bisen Vikram & Priya (2008), Industrial Psychology (third edition), New Age
International Publishers, NewDelhi
Course Objectives: To understand the use of three basic surveying tools: the tape, the
level, and the transit (Theodolite). To apply geometric and trigonometric principles to
basic surveying calculations.. To become efficient in keeping accurate, legible and
complete notes in a well-prepared field book. To understand field procedures in basic
types of surveys, and the responsibilities of a surveying team. To acquire an awareness
of the limitations of the basic surveying instruments and the possible errors that could
arise. To apply drawing techniques in the development of a topographic map.
UNIT1
Introduction :Importance of surveying to engineers, Plane and geodetic surveying,
methods of location of points, principle of surveying from whole to part, conventional
signs.
Measurement of Distances: Different types of chains, tapes and their uses. Sources of
error and precautions, corrections to tape measurements. Field problems in distance
measurement.
UNIT 2
Measurement of Angles & Direction : Different types of direction measuring
instruments and their uses. Reference meridians, Bearing and azimuths, magnetic
declination and its variation. Use and adjustment of surveyors and prismatic compass.
Vernier and micro-optic theodolite, temporary and permanent adjustment of Vernier
theodolite. Measurement of horizontal and vertical angle by different methods.
Application of theodolite in field problems.
UNIT3
Traversing: Different methods of traversing; chain traverse, chain & compass
traverse, transit-tape traverse. Methods of computations and adjustment of traverse;
transit rule, Bowditch rule, graphical method, axis method. Gales traverse table.
UNIT 4
Leveling : Definitions of various terms in leveling. Different types of leveling, sources
of errors in leveling curvature and refraction corrections. Temporary and permanent
adjustment of dumpy and tilting levels. Computation and adjustment of levels. Profile
leveling; L-Section and cross-sections.
UNIT 5
Plane Table Surveying: Elements of plane table survey working operations, methods
of plane table survey; intersection, traversing and resection, two point and three point
problems.
Contouring: Characteristics of contours, contour interval, contour gradient, Methods
of locating contours, uses of contour maps.
UNIT-1
Introduction to information systems, Types of information Systems, Development of
Information Systems, Introduction to information security, Need for Information
security, Threats to Information Systems, Information Assurance, Cyber Security, and
Security Risk Analysis.
UNIT-2
Application security (Database, E-mail and Internet), Data Security Considerations-
Backups, Archival Storage and Disposal of Data, Security Technology-Firewall and
VPNs, Intrusion Detection, Access Control.
Security Threats -Viruses, Worms, Trojan Horse, Bombs, Trapdoors, Spoofs, E-mail
viruses, Macro viruses, Malicious Software, Network and Denial of Services Attack,
Security Threats to E-Commerce- Electronic Payment System, eCash, Credit/Debit
Cards. Digital Signature, public Key Cryptography.
UNIT-3
Developing Secure Information Systems, Application Development Security,
Information Security Governance & Risk Management, Security Architecture &
Design Security Issues in Hardware, Data Storage & Downloadable Devices, Physical
Security of IT Assets, Access Control, CCTV and intrusion Detection Systems,
Backup Security Measures.
UNIT-4
Security Policies, Why Policies should be developed, WWW policies, Email Security
policies, Policy Review Process-Corporate policies-Sample Security Policies,
Publishing and Notification Requirement of the Policies.
Information Security Standards-ISO, IT Act, Copyright Act, Patent Law, IPR. Cyber
Laws in India; IT Act 2000 Provisions, Intellectual Property Law: Copy Right Law,
Software License, Semiconductor Law and Patent Law.
Unit-III : Fuzzy Logic-I (Introduction) Basic concepts of fuzzy logic, Fuzzy sets and
Crisp sets, Fuzzy set theory and operations, Properties of fuzzy sets, Fuzzy and Crisp
relations, Fuzzy to Crisp conversion.
UNIT-V
Application of polymers in space, ocean, electronics, medical, agriculture, automobile,
sports and building construction.
Cement concrete
1. Workability test.
2. Compressive strength.
3. Tensile strength
Reinforcing Steel
1. Tensile and yield strength.
2. Percentage elongation
Non-destructive testing on concrete
Bricks
1. Water absorption.
2. Dimension Tolerances
3. Compressive strength
4. Efflorescence
Unit-II
Rise and Development of Industry : Early Industrialism – Types of Productive
Systems – The Manorial or Feudal system. The Guild system, The domestic or putting-
out system, and the Factory system. Characteristics of the factory system. Causes and
Consequences of industrialization. Obstacles to and Limitations of Industrialization.
Unit-III
Industrialization in India. Industrial Policy Resolutions – 1956.Science.Technology
And Innovation Policy of India 2013.
Unit-IV
Contemporary Issues : Grievances and Grievance handling Procedure. Industrial
Disputes: causes, Strikes and Lockouts. Preventive Machinery of Industrial Disputes:
Schemes of Workers Participation in Management- Works Committee, Collective
Bargaining, Bi-partite & Tri-partite Agreement, Code of Discipline, Standing Orders.
Labor courts & Industrial Tribunals,
UNIT 1:
Course Introduction - Need, Basic Guidelines, Content and Process for Value
Education
1. Understanding the need, basic guidelines, content and process for Value Education
2. Self-Exploration–what is it? - its content and process; ‘Natural Acceptance’ and
Experiential Validation- as the mechanism for self-exploration
3. Continuous Happiness and Prosperity- A look at basic Human Aspirations
4. Right understanding, Relationship and Physical Facilities- the basic requirements
for fulfillment of aspirations of every human being with their correct priority
5. Understanding Happiness and Prosperity correctly- A critical appraisal of the
current scenario
6. Method to fulfill the above human aspirations: understanding and living in harmony
at various levels
UNIT 2:
Understanding Harmony in the Human Being - Harmony in Myself!
7. Understanding human being as a co-existence of the sentient ‘I’ and the material
‘Body’
8. Understanding the needs of Self (‘I’) and ‘Body’ - Sukh and Suvidha
9. Understanding the Body as an instrument of ‘I’ (I being the doer, seer and enjoyer)
10.Understanding the characteristics and activities of ‘I’ and harmony in ‘I’
11.Understanding the harmony of I with the Body: Sanyam and Swasthya; correct
appraisal of Physical needs, meaning of Prosperity in detail 12.Programs to ensure
Sanyam and Swasthya - Practice Exercises and Case Studies will be taken up in
Practice Sessions.
UNIT 3:
Understanding Harmony in the Family and Society- Harmony in HumanHuman
Relationship
13.Understanding Harmony in the family – the basic unit of human interaction
14.Understanding values in human-human relationship; meaning of Nyaya and
PS 8:
1. Observe on how many occasions you are respecting your related ones (by doing the
right evaluation) and on how many occasions you are disrespecting by way of
undervaluation, over-evaluation or otherwise evaluation.
2. Also observe whether you’re feeling of respect is based on treating the other as
yourself or on differentiations based on body, physical facilities or beliefs. Expected
outcome: The students are able to see that respect is right evaluation, and only right
evaluation leads to fulfillment in relationship. Many present problems in the society
are an outcome of differentiation (lack of understanding of respect), like gender
biasness, generation gap, caste conflicts, class struggle, dominations through power
play, communal violence, clash of isms, and so on so forth. All these problems can be
solved by realizing that the other is like me as he has the same natural acceptance,
potential and program to ensure a happy and prosperous life for him and for others
though he may have different body, physical facilities or beliefs.
PS 9:
1. Write a note in the form of story, poem, skit, essay, narration, dialogue to educate a
child. Evaluate it in a group.
2. Develop three chapters to introduce ‘social science- its need, scope and content’ in
the primary education of children Expected outcome: The students are able to use their
creativity for educating children. The students are able to see that they can play a role
in providing value education for children. They are able to put in simple words the
issues that are essential to understand for children and comprehensible to them. The
students are able to develop an outline of holistic model for social science and compare
it with the existing model.
Unit 4:
Understanding Harmony in the Nature and Existence - Whole existence as Co-
existence PS 10:
List down units (things) around you. Classify them in four orders. Observe and explain
the mutual fulfillment of each unit with other orders. Expected outcome: The students
are able to differentiate between the characteristics and activities of different orders
and study the mutual fulfillment among them. They are also able to see that human
beings are not fulfilling to other orders today and need to take appropriate steps to
ensure right participation(in terms of nurturing, protection and right utilization) in the
nature.
PS 11:
1. Make a chart for the whole existence. List down different courses of studies and
relate them to different units or levels in the existence. 2. Choose any one subject
being taught today. Evaluate it and suggest suitable modifications to make it
appropriate and holistic. Expected outcome: The students feel confident that they can
understand the whole existence; nothing is a mystery in this existence. They are also
able to see the interconnectedness in the nature, and point out how different courses of
study relate to the different units and levels. Also they are able to make out how these
courses can be made appropriate and holistic.
UNIT 5: Implications of the above Holistic Understanding of Harmony at all Levels of
Existence
PS 12:
UNIT-IV
Magnetic properties: Concept of magnetism- Dia, para, ferro magnetic materials,
Hysteresis, Soft and hard magnetic materials, Magnetic Storages.
Electric Properties: Energy band, concept of conductor, insulator and semi
conductor. Intrinsic and extrinsic semi-conductors, P-n junction and transistors, Basic
devices and their applications. diffusion of Solid Super conductivity and its
applications, Messier effect.Type I & II superconductors. High Temp.
superconductors.
UNIT-V
Ceramics: Structure, types, properties and applications of ceramics.
Mechanical/Electrical behaviour and processing of ceramics.
Plastics: Various types of polymers/plastics and their applications. Mechanical
behaviour and processing of plastics, Future of plastics.
Other Materials: Brief description of other materials, such as optical and thermal materials,
concrete, composite materials and their uses.
Other Materials: Brief description of other materials, such as optical and thermal
materials, concrete, composite materials and their uses.
Performance of materials in service: Brief theoretical consideration of fracture,
fatigue, and corrosion and its control
Text / Reference Books:
1. W.D. Callisster Jr. “Material Science & Engineering Addition” - Wesly Publishing
Co.
2. Van Vlash, “Elements of Material Science & Engineering”, John Wiley & Sons
3. V. Raghvan, “Material Science”, Prentice Hall of India
4. Narula, “Material Science”, Tata Mc.Graw Hill
5. Srivastava, Srinivasan, “Science Of Materials Engineering” New Age International.
UNIT-I
Building Requirements & Construction System: Building components, their functions and
requirements , types of construction, load bearing construction and framed structure construction
Lift slab construction . Prefabricated/precast construction; advantages & disadvantage of
prefabrication.
Foundation & Site Preparation: Purpose, types of foundation, depth of foundation,
Sequence of construction activity and co-ordination, site clearance, marking, foundation plan,
Brick and Stone Masonry : Basic principle of sound masonry work, different types of bonds,
relative merits merit and demerits of English, single Flemish, and double Flemish bond.
Comparison between stone and brick masonry, General principles, classification of stone
masonry
UNIT-II
Damp Proofing: Causes of dampness, effects of dampness methods and material for damp
proofing DPC treatment in buildings, methods and materials for anti termite treatment.
Stairs : Terms used, requirements of good staircase, classification, construction details and
suitability of different types of stairs, lifts and lamps.
UNIT-IV
Climatic and comfort Consideration: Elements of climate, global climate, climatic zones of India,
comfort conditions, biclimatic chart, climate modulating devices.
Orientation: Meaning, factors affecting orientation, orientation criteria for tropical climate.
Building Bye Laws and NBC Regulations: Objective of by-laws, Regulation regarding;
means of access, lines of building frontages, covered area, floor area ratio, open spaces around
buildings, height & sizes of rooms, plinth regulation and sanitation provisions.
UNIT-V
Principles of Planning: Different factors affecting planning viz-aspect, prospect, furniture
requirement, roominess, grouping, circulation, elegance, privacy etc.
Vastu Shastra In Modern Building planning: Factors considered in Vastu site selection,
orientation, planning and design of residential buildings, office buildings.
REFERENCE BOOKS
1- Manual of Tropical Housing and Buildings by Koenigs Berger Orient and
Longman. 2- Building Drawing by M.G.Shah, C.M. Kala, S.Y.Patki , Tata Mc
Graw Hills. 3.SP.41 (S&T)- Handbook on functional Requirements of Buildings
Part-I
1. National Building Code, BIS.
2. Architecture Drafting and Design by Donald E. Helper, & Paul I Wallach.
3. Time Saver Standards for Housing and Residential Development by DE Chiara, Tata Mc
Graw Hill, Delhi.
UNIT-1
Ingredients of concrete: Cement: hydration of cement and its basic compounds,
structure of hydrated cement, C-S-H gel, heat of hydration, gel- space ratio and its
significance.
Aggregates: types, physical properties and standard methods for their determination.
Concrete :Grade of concrete, proportioning of ingredients, water content and its quality for
concrete, water/cement ratio and its role, Properties of fresh concrete including workability,
air content, Flow ability, Segregation,
UNIT-II
Properties of hardened concrete such as strengths, permeability, creep, shrinkage,
factors influencing, Standard tests on fresh and hardened concrete as per IS code. Aggregate-
UNIT-III
Concrete Handling in Field Batching, mixing, placing and transportation of concrete,
equipment’s for material handling, various methods their suitability and precautions
Compaction of concrete: methods & equipment’s. Curing of concrete: various methods
their suitability. Durability of concrete
UNIT-IV
Concrete mix deign (ACI, IS method), quality control for concrete.
Admixture in concrete: Chemical and mineral admixtures, their types and uses: water
reducers, accelerator, retarders, water-proofing plasticizers, super plasticizers, air-entraining
agents. Use of fly ash and silica fume in concrete their properties and effect.
UNIT-V
Form work: Requirements, their types and codal guidelines for the design. Typical
formworks and shuttering/centering for Columns, beams, slabs walls, arches and
staircase. Slip and moving formwork.
Special types of concrete: Introduction to high strength concrete, high performance
concrete, sulphate resisting concrete, under water concreting, self compacting concrete,
pumpable concrete: their salient properties and application.
REFERENCE BOOKS
1. Concrete: Microstructure, Properties & Materials by Mehta P.K, Tata Mc Graw Hill.
2. Concrete Technology by M.S.Shetty, S.Chand & Co.
UNIT 1
General Geology: Subdivision of Geology; Importance of Geology in Civil Engg. ; Internal
Structure of the Earth; Physical properties of Minerals; Weathering and Work of Wind &
River; Geological Time Scale.
UNIT 2
Petrology: Origin, Classification, Texture & Structures of Igneous, Sedimentary and
Unit - I
Difference between open channel flow and pipe flow, geometrical parameters of a channel.
Continuity equation for steady and unsteady flow. Critical depth, concepts of specific energy
and specific force, application of specific energy principle for interpretation of open channel
phenomena, flow through vertical and horizontal contractions.
Unit – II
Chezy’s and Manning’s equations for uniform flow in open channel, Velocity distribution,
most efficient channel section, compound channels.
Unit - III
Equation of gradually varied flow and its limitations, flow classification and surface profiles,
integration of varied flow equation by analytical, graphical and numerical methods, Flow in
channels of non-linear alignment specifically for the case of a bend.
Unit - IV
Classical hydraulic jump, Evaluation of the jump elements in rectangular and nonrectangular
channels on horizontal and sloping beds. Rotodynamic pumps, classification on different
basis, basic equations, Velocity triangles, manometric head, efficiencies, cavitation in pumps,
characteristics curves.
Unit - V
Open channel surge, celerity of the gravity wave, deep and shallow water waves, Rectangular
free overfall. Rotodynamic Machines, Pelton Turbine, equations for jet and rotor size,
efficiency, spear valve, reaction turbines, Francis and Kaplan type, Head on reaction turbine,
unit quantities, similarity laws and specific speed, cavitation, characteristic curves.
B.TECH CIVIL ENGINEERING Page 30
References :
1.Chow,V.T.”Open Channel hydraulics” McGraw Hill Publication
2. Subramanya, K., Flow through Open Channels, TMH, New Delhi
3. Ranga Raju, K.G., Flow through open channels, T.M.H. New Delhi
4. Rajesh Srivastava, Flow through Open Channels , Oxford University Press
5. Streeter, V.L. & White E.B., ”Fluid Mechanics” McGraw Hill Publication
02BTCE406- GEOINFORMATICS
Course Objective: The objective of this course is to enable participants to understand the
concepts of Geographic Information Systems as an information technology science and know
the components of a GIS. Participants are expected to be able to analyses situations in which
the use of GIS technology would offer an advantage. The course serves as a platform for
more advanced modules such as GIS & GPS, Remote Sensing, Geospatial Programming and
Digital Imaging Processing.
Unit - I
Aerial Photographs- Basic terms & Definitions, scales, relief displacements, Flight Planning,
Stereoscopy, Characteristics of photographic images, Fundamentals of aerial photo-
interpretation, Introduction to Digital Photogrammetry.
Unit - II
Remote Sensing: Physics of remote sensing, Remote sensing satellites and their data
products, Sensors and orbital characteristics, Spectral reflectance curves, resolution and
multi-concept, FCC
Unit - III
Satellite Image - Characteristics and formats, Image histogram, Introduction to Image
rectification, Image Enhancement, Land use and land cover classification system,
Unsupervised and Supervised Classification, Applications of remote sensing
Unit - IV
Basic concepts of geographic data, GIS and its components, Data models, Topology, Process
in GIS: Data capture, data sources, data encoding, geospatial analysis, GIS Applications
Unit - V
Global Navigation Satellite System (GNSS), GPS, GLONASS, GALILEO, GPS: Space
Segment, Control segment, User segment, GPS satellite signals, Datum, coordinate System
and map projection, Static, Kinematic and Differential GPS, GPS Applications
References
1. A M Chandra : Higher Surveying
Unit–I :
Classification of Structures, Types of structural frameworks and Load transfer Mechanisms,
stress resultants, degrees of freedom per node, Static and Kinematic Indeterminacy for beams,
trusses and building frames. Classification of Pin jointed determinate trusses, Analysis of
determinate plane and space trusses (compound and complex). Method of Substitution and
Method of tension coefficient.
Unit– II
Rolling loads and influence line diagrams for beams and trusses, Absolute maximum bending
moment and shear force. Muller-Breslau’s principal & its applications for determinate
structures.
Unit – III
Arches, Types of Arches, Analysis of Arches, Linear arch, Eddy’s theorem, Analysis of three
hinged parabolic arch, spandrel braced arch, moving load & influence lines for three hinged
arch.
Unit – IV
Strain Energy of deformable systems, Maxwell’s reciprocal & Betti’s theorem, Castiglione’s
first theorem, Calculations of deflections: Moment area method, unit load Method &
Conjugate beam methods for statically determinate beams, truss and frames.
Unit–V
Unsymmetrical bending in beams, location of neutral axis, computation of stresses and
deflection, Shear Centre its location for common structural sections. Bending of curved bars
in plane of bending, stresses in bars of small & large initial curvatures.
References :-
1.Hibbler ,” Structural Analysis “, Pearson Education
2.T S Thandavmorthy ,” Analysis of Structures “, Oxford University Press
Concept of Efficiency, Theory of Demand , Elasticity of Demand, Supply and Law of Supply
indifference Curves, Budget Line, Welfare Analysis, Scope of Managerial Economics,
Techniques and Applications of Managerial Economics.
Unit-2 Market Structure
UNIT – 1
Stresses in soils: Normal and shear Stresses on a plane, Stresses due to applied
loads, Boussinesq’s solution for a point load, line load, strip load, uniformly
loaded circular and rectangular areas, Isobar and pressure bulb concept, stress
distribution on horizontal and vertical planes, Newark’s chart and its
application, contact pressure.
4. Gopal Ranjan and A.S.R. Rao – Basic and Applied Soil Mechanics
UNIT-1
Introduction: Role of Transportation, Modes of Transportation History of
road development, Road types and pattern, Nagpur road plan, Bombay road
plan & 3rd 20 Year Road Plan, NHAI Act (1988), Road Development Plan
Vision: 2021 documents, Expressway Master Plan, Features of PMGSY.
UNIT-2
Highway Alignment & Location Survey: Horizontal Profile, Vertical Profile,
Factors Controlling the alignment, Survey for route location, Preparation of
Detailed Project Report (DPR)
Geometric Design: Cross sectional elements, camber, shoulder, sight distance,
horizontal curves, super elevation, extra widening, transition curves and
gradient, vertical curves, summit and valley curves.
UNIT-3
Traffic Engineering: Traffic Characteristics, traffic volume and speed study,
traffic capacity, density, traffic control devices, signs, signals, Island,
Intersection at grade and grade separated intersections, design of rotary
intersection.
UNIT-4
Highway Materials: Road Construction materials : Properties of Subgrade,
Aggregates & Binding materials, Various tests and specifications,
Design of Highway Pavement : Types of Pavements, Design factors, Design
of Flexible Pavement by CBR method (IRC : 37-2012), Design of rigid
pavement, Westergaard theory, load and temperature stresses, joints, IRC
method of rigid pavement design (IRC:58-2011)
UNIT-5
Highway Construction: Construction of Subgrade, Water Bound Macadam
(WBM), Wet mix macadam (WMM), Granular Sub Base (GSB),Tack Coat,
Prime Coat, Seal Coat, Surface Dressing, Bituminous Macadam (BM), Semi
dense bituminous concrete (SDBC) and Bituminous concrete, Dry lean
concrete (DLC), Cement Concrete (CC) road construction, Roller Compacted
Concrete Roads.
Note:
The students should be given a comprehensive problem at the end which
requires inputs/ knowledge/ application from all the units of the syllabus. It
may be evaluated as a part of TAQ.
Unit – 5
Basics of Plastic Analysis, Applications of Static and Kinematic theorem for
Plastic Analysis of Beams and Frames.
Note:
The students should be given a comprehensive problem at the end which
requires inputs/ knowledge/ application from all the units of the syllabus. It
may be evaluated as a part of TAQ.
Text Books & References:
Unit – 1
Concrete Making materials, Properties of concrete and reinforcements, testing
of concrete, Introduction to Various Design Philosophies, Design of
Rectangular Singly and Doubly Reinforced Sections by Working Stress
Method.
Unit – 2
Assumptions in Limit State Design Method, Design of Rectangular Singly and
Doubly Reinforced beams, T-beams, L-beams by Limit State Design Method.
Unit – 3
Behaviour of RC beam in Shear, Shear Strength of beams with and without
shear reinforcement, Minimum and Maximum shear reinforcement, design of
beam in shear, Introduction to development length, Anchorage bond, flexural
bond. (Detailed Examples by Limit State Design Method), Failure of beam
under shear, Concept of Equivalent Shear and Moments.
Unit – 4
Design of one way and two way solid slabs by Limit State Design Method,
Serviceability Limit States, Control of deflection, cracking and vibrations.
Unit – 5
Design of Columns by Limit State Design Method- Effective height of
columns, Assumptions, Minimum eccentricity, Short column under axial
compression, requirements for reinforcement, Column with helical
reinforcement, Short column under axial load and uni-axial bending, Design of
columns under bi-axial loading by Design Charts.
Note:
1. All designs shall be conforming to IS: 456 – 2000.
2. The students should be given a comprehensive problem at the end
which requires inputs/ knowledge/ application from all the units of the
syllabus. It may be evaluated as a part of TAQ•
1. IS: 456 – 2000, “ Code of Practice for Plain and Reinforced Concrete”,
Bureau of Indian Standards, New Delhi.
2. Jain, A.K., “Reinforced Concrete: Limit State Design”, Nem Chand &
Bros., Roorkee.
3. Gambhir, M L ,”Fundamentals of Reinforced Concrete”, Prentice Hall
of India.
4. Unnikrishna Pillai, S. & D. Menon, “ Reinforced Concrete Design”,
Tata Mc-Graw Hill Company Limited.
5. Jain, O. P. & Jai Krishna, “ Plain and Reinforced Concrete”, Vol. I
II, Nem Chand & Bros., Rookee.
6. Park, R. and T. Pauley,” Reinforced Concrete Structures”, John Wiley
& Sons.
7. Dayaratnam, P,”Reinforced Concrete Design”, Oxford & IBH.
8. Sinha, S.N., “Reinforced Concrete Design” Mc-Graw Hill Book
Publishing Company Ltd., New Delhi
9. Subramanian, N.,”Design of Reinforced Concrete Structures”, Oxford
University Press,New Delhi – 110 001.
Unit-1
Water supply: Water demands and domestic use, variation in demands;
population forecasting by various methods using logistic curve method; basic
needs and factors affecting consumption; design period. Sources of water and
their characteristics, quality of surface and ground waters; factors governing
the selection of a source of water supply; intakes structures and their design,
determination of the capacity of impounding reservoir.
Unit-2
Transmission of water: Various types of conduits, capacity and sizes
including economical sizes of rising main, structural requirements; laying and
testing of water supply pipelines; pipe materials, joints, appurtenances and
valves; leakages and control.
Storage and distribution of water: Methods of distribution, pressure and
gravity distribution systems, Concept of service and balancing reservoirs.
Unit-3
Capacity of distribution reservoirs; general design guidelines for
distribution system, Hardy - Cross method, equivalent pipe method of pipe
network analysis. Plumbing systems in buildings and houses: water
connections, different cocks and pipe fittings. Wastewater collection: Systems
of sanitation and wastewater collection, estimation of wastewater flows and
variations in wastewater flows.
Storm water: Collection and estimation of storm water by different formulae.
Unit-4
Flow in sewers: Flow in full and partially full sewers and design of sewers;
types of sewers, materials and construction of sewers, joints and sewer
appurtenances, layout and construction of sewer lines, small bore sewer
systems, Planning of sewerage systems.
Unit-5
Air Pollution: Definition, Sources, Classification of air Pollutants, National
ambient air quality standards, Lapse rate, Inversion, Plume behavior, Acid
rain, Vehicular emission and its standards.
Text Books:
Note:
Any 8 experiments are to be performed from the list of experiments.
References:
LIST OF EXPERIMENTS
Unit-I
Introduction: Concept, Development, application and scope of Industrial Management.
Productivity: Definition, measurement, productivity index, types of production system,
Industrial Ownership.
Unit-II
Management Function: Principle of Management – Time and motion study, work
simplification – process charts and flow diagrams, Production Planning.
Unit-III
Inventory Control: Inventory, Cost, Deterministic Models, Introduction to supply chain
management.
Unit-IV
Quality Control: Process control, SQC, Control charts, Single, Double and Sequential
Sampling, Introduction to TQM.
Unit – 1
Nature of Stresses in flat slabs with and without drops, coefficient for design of flat slabs,
reinforcement in flat slabs. (IS Code Method).
Unit –2
Analysis and design of beam curved in plan. Structural behaviour of footings, design of footing
for a wall and a single column, combined rectangular and trapezoidal footings, Design of strap
footing.
Unit – 3
Structural behaviour of retaining wall, stability of retaining wall against overturning and sliding,
Design of T-shaped retaining wall, Concept of Counter fort retaining wall. Loads, forces and
I.R.C. bridge loadings, Design of R.C. slab culvert.
Design criteria, material specifications and permissible stresses for tanks, design concept, of
circular and rectangular tanks situated on the ground / underground, design of overhead tanks.
Unit – 5
Note: The students should be given a comprehensive problem at the end which requires inputs/
knowledge/ application from all the units of the syllabus. It may be evaluated as a part of TAQ•
1. IS : 456 – 2000, “ Code of Practice for Plain and Reinforced Concrete”, Bureau of Indian
Standards, New Delhi.
2. Jain, A.K., “Reinforced Concrete : Limit State Design”, Nem Chand & Bros., Roorkee.
3. Dayaratnam, P, “Limit State Design of Reinforced Concrete Structures” Oxford & IBH
Publishing Co. Pvt. Ltd., New Delhi.
4. Gambhir, M L ,”Fundamentals of Reinforced Concrete”, Prentice Hall of India.
5. Unnikrishna Pillai, S. & D. Menon, “ Reinforced Concrete Design”, Tata Mc-Graw Hill
Company Limited.
6. Jain, O. P. & Jai Krishna, “ Plain and Reinforced Concrete”, Vol. I & II, Nem Chand &
Bros., Rookee.
7. Park, R. and T. Pauley,” Reinforced Concrete Structures”, John Wiley & Sons.
8. Dayaratnam, P,”Reinforced Concrete Design”, Oxford & IBH.
Introduction: Beneficial uses of water and quality requirements, standards. Concepts of water
and wastewater quality: physical, chemical and bacteriological examination of water and
wastewater, Water borne diseases and their control.
Wastewater characteristics: Temperature, pH, colour and odour, solids, nitrogen and
phosphorus, chlorides, toxic metals and compounds, BOD, COD etc. Objectives of treatment:
Water and wastewater treatment, unit operations and processes and flow sheets.
Disposal of wastewater on land and in water bodies, Recycling and Reuse of wastewater.
Filtration: Theory of filtration; hydraulics of filtration; Carmen - Kozeny and other equations,
slow sand, rapid sand and pressure filters, backwashing; design of slow and rapid sand filters.
Disinfection: Requirements of an ideal disinfectant; kinetics of disinfection, various
disinfectants, chlorination and practices of chlorination. Water softening and ion exchange:
calculation of dose of chemicals.
Unit-4
Unit-5
Design of low and high rate anaerobic digesters and septic tank. Basic concepts of anaerobic
contact process, anaerobic filter, anaerobic fixed film reactor, fluidized bed and expanded bed
reactors and upflow anaerobic sludge blanket (UASB) reactor.
Other emerging technologies for wastewater treatment: Duckweed pond, vermiculture, root zone
technologies, sequential batch reactor (SBR) etc.
Solid waste Management: Definition of solid waste and its classification, Hazardous waste,
Prevailing regulations of solid waste management in India.
Noise Pollution: Definition, Sources, Prevailing noise standards in India.
Note: The students should be given a comprehensive problem at the end which requires inputs/
knowledge/ application from all the units of the syllabus. It may be evaluated as a part of TAQ•
References:
Text books:
Unit-1
Unit-2
Network Techniques: Bar Chart, Mile stone chart, work break down structure, and preparation of
networks. Net work techniques like PERT and CPM. In construction Management, Project
Monitoring and resource allocations through network techniques.
Unit-3
Project Cost Control: Cost Planning, Direct Cost, Indirect Cost, Total Cost Curve, Cost Slope.
Time Value of Money, Present Economy studies, Equivalence Concept, financing of projects,
Economic comparisons present worth method, Equivalent annual cost method, discounted cash
flow method. Depreciation and break even cost analysis of construction projects.
B.TECH CIVIL ENGINEERING Page 50
Unit-4
Contract Management: Legal Aspects of Contracts, laws related to contracts, land acquisition,
labour safety and welfare, Different types of contracts, their relative advantages and
disadvantages, Elements of Tender Preparation, Process of tendering, pre qualifications of
contracts, Evaluation of tenders, contract negotiation and award of work, monitoring of contract,
settlement of disputes, arbitration and commissioning of project.
Unit-5
Equipment Management: Productivity, operational cost, owing and hiring cost. Constriction
equipment: Earth moving, Hauling equipments, Hoisting equipments, Conveying Equipments,
Concrete Production equipments, Tunneling equipments.
Note: The students should be given a comprehensive problem at the end which requires inputs/
knowledge/ application from all the units of the syllabus. It may be evaluated as a part of TAQ•
References:
1. Robert L. Peurifoy, Clifford J., Schexnayder, Aviad Shapira “ Construction Planning
Equipment and Methods” McGraw Hills Education (India), Private Ltd.,New Delhi.
2. Srinath, L.S., “PERT and CPM Principals and applications” Affiliated East-West Press
Pvt. Ltd., New Delhi.
3. Patil, B.S., “Civil Engineering Contracts and Estimates” University Press India, Pvt. Ltd.
Hyderabad – 500 004
4. Construction Management by Ojha
5. Srivastava, U.K.,”Construction Planning and Management”, Galgotia Publications Pvt.
Ltd., New Delhi.
6. Construction Technology By Sarkar, Oxford.
Unit - 5
Stability of slopes, Limit equilibrium method, Method of slices, Simplified Bishop method,
Stability Charts. Soil behavior under dynamic loads, Machine foundation: classification,
definitions, design principle in brief, Barken’s method.
Note: The students should be given a comprehensive problem at the end which requires inputs/
knowledge/ application from all the units of the syllabus. It may be evaluated as a part of TAQ•
Text & Reference Books:
Unit - 1
Design of over-head tanks: Design of RC domes and beams curved in plan, design of Cylindrical
and rectangular tanks with different end conditions using IS: 3370 tables, Intze tank design based
on membrane analysis with mention of continuity effects. Design of staging: Braces, Columns
and Raft Foundation.
Unit - 2
Building Frames: Dead, Live, Wind and Earthquake loads, Analysis of framed building by
approximate methods for vertical and horizontal loads, concept of Exact Analysis, joint
detailing.
Unit - 4
2. Sawyer, C.N., McCarty, P.L. & Parkin, G.F. “Chemistry for Environmental Engineering”,
Mc-Graw Hill.
3. Mathur, R.P. “Water & Wastewater Testing”, Lab Manual, Roorkee.
1. Preparation of working drawings for the following using any drafting software
2. RC Beams- Simply supported, Continuous, Cantilever
3. T – beam / L-beam floor
4. Slabs – Simply supported, Continuous, One way and two way slabs.
5. Columns – Tied Columns and Spirally reinforced columns.
6. Isolated footings for RC Columns.
7. Combined rectangular and trapezoidal footings.
8. Detailing of Buildings with respect to Earthquake Resistant Design
References:
The purpose of the camp is to train students in using modern surveying techniques and
equipment such as GPS, total stations, automatic and digital levels, electronic theodolites, etc. to
prepare a detailed digital map.
The course will be run in the form of a camp for 7 working days and will involve the following
components:
1. Reconnaissance of the area to be mapped.
2. Control establishment: Observations and Adjustment using GPS and/or Total station traverse
to yield adjusted coordinates of control points.
3. Detail digital mapping using Total station/GPS.
4. Preparing a digital map using open source mapping software and report writing.
04BTCE712 DESIGN OF STEEL STRUCTURES
Unit ‐ 1
General Considerations
Introduction, Advantages of Steel as a Structural. Material, Disadvantages of Steel as a Structural
Material, Structural Steel, Stress‐Strain Curve for Mild Steel, Rolled Steel Sections, Convention for
Member Axes, Loads, Dead Load, Live Loads, Environmental Loads, Seismic Forces, Snow and Rain
Loads, Erection Loads, Basis for Design, Design Philosophies, Local Buckling of Plate Elements.
Introduction to Limit State Design
Introduction, Limit States for Steel Design, Limit States of Strength, Limit States of Serviceability, Actions
(Loads), Probabilistic Basis for Design, Design Criteria
Unit ‐2
Simple Connections‐–Riveted, Bolted and Pinned Connections
Introduction, Riveted Connections, Patterns of Riveted Joints, Bolted Connections, Types of Bolts, Types of
Bolted Joints, Load Transfer Mechanism, Failure of Bolted Joints, Specification for Bolted Joints,
Bearing‐Type Connections, Prying Action, Tensile Strength of Plate, Efficiency of the Joint, Combined Shear
and Tension, Slip‐Critical Connections, Combined Shear and Tension for Slip‐Critical Connections,
Working Load Design, Design of eccentric bolted connections.
Simple Welded Connections
Introduction, Types, Symbols, Welding Process, Weld Defects, Inspection of Welds, Assumptions in the
Analysis of Welded Joints, Design of Groove Welds, Design of Fillet Welds, Fillet Weld Applied to the
Edge of A Plate Or Section, Fillet Weld for Truss Members, Design of Intermittent Fillet Welds, Plug and
Slot Welds, Stresses Due To Individual Forces, Combination of Stresses, Failure of Welds, Distortion of
Welded Parts, Fillet Weld Vs Butt Weld, Welded Jointed Vs Bolted and Riveted Joints, Design of eccentric
welded connections, Working Load Design.
Unit – 3
Tension Members
Introduction, Types of Tension Members, Net Sectional Area, Effective Net Area, Types of Failure,
Design Strength of Tension Members, Slenderness Ratio (λ), Displacement, Design of Tension Member,
Lug Angles, Splices, Gusset Plate, Working Load Design.
Unit – 4
Compression Members
Text Books
1. Design of Steel Structures by N. Subramanian, Oxford University Press
2. Limit State Design of Steel Structures by S. K. Duggal, Tata Mcgraw Hill.
3. Design of Steel Structures by K S Sairam, Pearson Education
4. Design of Steel Structures by S Ramamurtham, DhanpatRai Publishing Company
Text Book
1. Irrigation Engg. and Hydraulic Structures by S.K. Garg, Khanna Publishers.
2. Irrigation and water Power engineering by B.C. Punmia, Laxmi Publications.
3. Engineering Hydrology by K. Subramanya, TMH.
4. Irrigation Water Power and Water Resource Engg. by K.R. Arrora.
UNIT-II
Track Geometrics, Turnouts and Crossings, Stations and Yards:
Railway alignment, vertical alignment – gradients and grade effects, horizontal alignment
– horizontal curves, super-elevation, concepts of cant excess and deficiency, safe
permissible speed, transition curves, widening of gauges and track clearances, points and
crossings – terminologies, types of turnouts, design of turnouts, types of crossings, design of
crossings. Different types of stations and Yards: classification and functioning. 8
UNIT –III
Signalling and Interlocking, Urban Railways: Classification of Signals, method of train
working, absolute block system, Centralized train control system, ATS, interlocking of track,
principle of interlocking, types of interlocking, high speed track – track requirement, speed
limitations, high speed technologies, Urban railway- railway system in urban areas. 8
UNIT – 4
Introduction to Airport Engineering
Air craft characteristics affecting airport planning & design, selection of site for an airport.
Airports - layout and orientation, Runway and taxiway design consideration and
geometric design. Airport drainage management, Zoning laws, Visual aids and air traffic
control, Runway lighting, Runway operation Helipads, hangers, service equipment. 8
UNIT – 5
Water Transport
Harbours and ports, Types of Harbours; Harbours - layouts, shipping lanes, anchoring, location
identification; Littoral transport with erosion and deposition; sounding methods; Dry and Wet
docks, components and operational Tidal data and analyses.
Inland waterways: advantages and disadvantages; Development in India. Inland water
operation.
Text Books
1. A Text Book of Railway Engineering by S. P. Arora & S. C. Saxena
2. Railway Engineering by M. M. Aggrawal.
References
1. Railway Engineering by Rangwala (Charotar Publishing House).
2. Airport Engineering by Rangwala (Charotar Publishing House).
3. Airport Planning & Design by Khanna , Arora & Jain Nem Chand & Brothers).
Unit-5
Environmental audit: definitions and concepts, environmental audit versus accounts audit, compliance
audit, relevant methodologies, various pollution regulations, Introduction to ISO and ISO 14000.
Unit ‐ 1
Introduction, Historical review, plastic failure, plastic moment, capacity of a cross‐section,
shape factor, concept of load factor.
Unit – 2
Plastic hinge and collapse Mechanisms. Analysis of beams and frames
Unit – 3
Semi Graphical method and Mechanism method.
Unit – 4
Plastic moment distribution for multi‐storey and multi‐bay frames.
Unit – 5
Analysis for deflections at collapse. Effect of axial force and shear.
Books :
1. Plastic Analysis of Structures by P G Hodge, McGraw Hill
2. Plastic Analysis and Design of steel structures by M Bill Wong
3. Inelastic Analysis of Structures by M Jirasek & Z P Bazant , John Wiley
Flow measurement: by sharp crested and broad crested weirs, critical depth flumes, sluice
gate, Free overfall.
Rapidly varied unsteady flow: Equation of motion for unsteady flow, “Celerity” of the gravity
wave, deep and shallow water waves, open channel positive and negative surge,
Unit‐IV
Spatially Varied Flow (SVF): Basic principles, Differential SVF equations for increasing and
decreasing discharge, Classifications and solutions, Numerical methods for profile computation,
Flow over side-weir
and Bottom-rack.
Unit – V
Flow in channel of non-linear alignment and non-prismatic channel sections, Design
considerations for sub critical and super critical flows, Design of culvert.
References:
1. Chow, V.T., Open channel Hydraulics, McGraw Hill International
3. Henderson, F.M., Open Channel Flow, McGraw Hill International
4. Subramanya, K., Flow in Open Channels, Tata McGraw Hill
5. Ranga Raju, K.G., Flow through open channels, T.M.H.
5. M. Hanif Chaudhry, Open Channel Flow, PHI
6. French, R.H., Open channel Hydraulics, McGraw Hill International
7. Srivastava, Flow through Open Channels, Oxford University Press.
8. Open Channel Flow by Madan Mohan Das
UNIT – 1
Elements of Computer Aided Design and its advantages over conventional design.
Hardware required for CAD works.
UNIT – 2
Principles of software design, concept of modular programming, debugging and testing.
UNIT – 3
Computer applications in analysis and design of Civil Engineering systems.
UNIT - 4
Use of software packages in the area of Structural, Geotechnical, and Environmental
fields.
UNIT – 5
Expert system, their development and applications, Introduction to Neural Networks.
Reference:
1. Computer Aided Design – S. Rajiv, Narosa Publication
2. A.I. and Expert System – Robert L. Lerine & / Lane E. Drang, McGraw Hill
3. “Neural Computing: Waserman, vonnostrand.
4. Auto Cadd 2013 Dummes Bill Fane
5.Cad Frame & Architechture by Pieter Van Der Wolf
Unit ‐5
Guidelines for design and construction of machine foundation: data required for design of
reciprocating, impact and rotary type machines, guidelines for the design of different type
machines, construction guidelines, guidelines for providing vibration absorbers
Books:
1. S. Prakash – Machine Foundation .
2. B. B. Prasad – Fundamentals of Ground Vibration
3. Richard, Hall and Wood – Vibrations of Soil and Foundations
4. Foundation for Industrial Machine by R.G. Bhatia
Unit – 1
Internal structure of earth, Causes of earthquakes, Seismic waves, Magnitude, Intensity and
Energy released, Characteristics of Earthquakes,
Unit - 2
Response of Structure to Earthquake motion, Modeling of structures, Dynamics of single degree
of freedom system,
Unit -3
Dynamics of multi degree of freedom system, Idealization of structures, seismic
response,
Unit – 4
Introduction to earthquake resistant design, Equivalent lateral force method, Response
spectrum method, Time history method, Introduction to earthquake resistant brick and
masonry buildings.
Unit – 5
Reinforced Concrete framed buildings, Code provisions. Introduction to machine foundation &
its design. Degrees of freedom of a block foundation.
References:
1. Introduction to Structural Dynamics - J.M. Biggs
2. Elements of Earthquake Engineering - Jai Krishna an A.R. Chandrasekaran
3. IS: 1983 - 1984 Criterion for Earthquake Resistant Design.
4. Structural Dynamics - Theory & computation - Mario Paz.
5. Dynamics of Structures Theory and Applications to Earthquake Engineering - Anil K.
Chopra.
6. Earthquake Resistant of Design of structures, Agarwal and Srikhande.
7. Earthquake Resistant of Design of structures, S.K.Duggal
UNIT-II
Quality Management
Organization structure and design, quality function, decentralization, designing and fitting,
organization for different type products and company, economics of quality value and
contribution, quality cost, optimizing quality cost, seduction program.
Human Factor in quality
Attitude of top management, cooperation of groups, operators attitude, responsibility, causes of
apparatus error and corrective methods.
UNIT-III Control
Charts
Theory of control charts, measurement range, construction and analysis of R charts, process
capability study, use of control charts.
Attributes of Control Chart
Defects, construction and analysis of charts, improvement by control chart, variable sample
size, construction and analysis of C charts
UNIT -IV
Defects diagnosis and prevention defect study, identification and analysis of defects,
correcting measure, factors affecting reliability, MTTF, calculation of reliability, building
reliability in the product, evaluation of reliability, interpretation of test results, reliability
control, maintainability, zero defects, quality circle.
UNIT –V
ISO-9000 and its concept of Quality Management
ISO 9000 series, Taguchi method, JIT in some details.
UNIT-V
Inventory
Control:
Models of inventory, operation of inventory system, quantity discount.
Replacement:
Replacement models: Equipments that deteriorate with time, equipments that fail with time.
Text / Reference Books:
1. Wayne L. Winston,”Operations Research” Thomson Learning,2003.
2. Hamdy H. Taha, “Operations Research-An Introduction” Pearson Education,2003.
3. R. Panneer Seevam, “Operations Research” PHI Learning, 2008.
UNIT-II
STABILITY-I:
Stability via Lyapunov’s indirect method, converse Lyapunov functions, sublevel sets of
Lyapunow functions, Lasalle’s invariance principle.
UNIT-III
Lyapunov’s direct method, converse Lyapunov’s theorems, Brokett’s theorem, applications to
control system, stable manifold theorem, centre manifold theorem, normal form theory
And applications to nonlinear systems.
UNIT-IV
Bifurcation:
Elementary Bifurcation theory, catastrophe, strange attractor, fractals, fractal geometry and
fractal dimension.
UNIT-V
Chaos:
Deterministic Chaos, routes to chaos (period doubling, quasiperiodicity, intermittency,
universality, renormalization); Measurement of Chaos (Poincare section, Lyapunov index,
entropy);.control of chaos.
Reference Books:
1. D.K. Arrowsmith and C.M. Place, “An Introduction to Dynamical Systems” Cambridge
University press, London, 1990.
K.T. Alligood, T.D. Sauer, and J.A Yorke, “CHAOS: An Introduction to Dynamical
System” Springer Verlag, 1997.
2. H.K. Khalis, “Nonlinear Systems” Prentice Hall, 1996.
3. R. R. Mohler, “Non linear systems, Vol-I: Dynamics and Control” Prentice Hall, 1991.
J.M. T. Thomson and H.B. Stewart, “Nonlinear Dynamics and Chaos” John Wiley &
Sons, 1986.
4. Stanislaw H. Zak, “Systems and control” Oxford University Press, 2003.
Text/Reference Books:
3. A.K. Chitab& R.C. Gupta “Product design & Manufacturing” – Prentice Hall (EE)
4. R.P. Crewford, “The Technology of creation Thinking” Prentice Hall.
5. C.D. Cain, “Product Design & Decision” Bussiness Books.
7. C.D. Cain, “Engg. Product Design” Bussiness Books.
5. Robot Programming: Level of robot programming, language based programming, task level
programming, robot programming synthesis, robot programming for welding, machine
tools, material handing, assembly operations, collision free motion planning.
Applications: Application of robot in welding, machine tools, material handling,
assembly operations parts sorting and parts inspection.
Text/Reference Books:
1. Coifet Chirroza, “An Introduction to Robot Technology” Kogan Page.
2. Y. Koren “Robotics for Engineers” Mcgraw Hill.
3. K. S. Fu, R.C. Gonzalez Y& CSG Lee, “Robotics” McGraw Hill.
4. J.J. Craig, “Robotics” Addison-Wesley.
5. Grover, Mitchell Weiss, Nagel Octrey, “Industrial Robots” Mcgraw Hill. Asfahl, Robots
& Manufacturing Automation” Wily Eastern.