Beruflich Dokumente
Kultur Dokumente
LABORATORY
Connections
N.4 M6 holes on 25x25 grid placed on the back
plane of layer 1 body.
N°4 radial 90° M6 holes on layer 2 body.
N°3 tapered holes on back plane of layer 1 body for
fluid inlet.
N°6 M6 holes for extraction screw to help
dismounting of body with solidified solution inside
the channels.
Safe, easy installation
High voltage cable can be safely connected to coaxial
needles thanks to one of the eight tapers M6 holes. To
maintain the needle in the right position and to
In a minute it’s possible to open the metal body to look
electrically isolate it from the ground we can provide a
inside every fluid channel and with a screw driver dielectric support with the ability to change the height
change needles, even with other of different diameters. from desktop between 10 and 200 mm. This support
can be integrated with our
All fluid inlets are located in modular support system to
the back side of the needles obtain a simple reference
assembly to offer a compact with the collector and a
layout for piping. Every fluid movable setup to insert
inlet is provided with a inside hood when it’s need.
dismountable Luer F All the system must be
positioned in an
connector or barb fitting, on
appropriate, electrically
request. isolated volume (e.g.
The minimum configuration wood-glass hood), in order
with two coaxial needles can to work safely. Accidental
be upgraded in every electric shocks could cause
moment with a third layer to serious injury to people or
damage objects.
fix outside, directly on the
second layer block. User can decide
in every moments if use or not third layer Customisation and service
o Development of mechanical and electrical
dismounting it with six small screw.
interfaces for experiments or existing plants.
Each layer is independent and can be o Custom diameters and lengths for needles.
equipped with a needle of appropriate o Dielectric support for special operation.
diameter in a wide range of availability. o Instrumentation inside each channel: pressure
Needles are locked to the body with and temperature transmitter.
proprietary connectors with a smooth o Metallic gasket for high temperature or highly
corrosive solutions.
external surface and micrometric
o Motorized slides for uniform deposition.
CoaxNd.0EN Ed. Oct/2010 |2
Coaxial Needles for electrospinning
Technical data
rd
3 layer for coaxial needles Unit Value Notes
Body material AISI 316
Needles material AISI 316
Sealing type O-rings
Sealing material NBR Viton on request
Fluid inlet connection Tapered ¼” 28 UNF Std. with Luer F adaptor
Dismountable body Yes
Dismountable needle Yes Linari proprietary connector
Layer 3 OD range mm 0.4 .. 3.0 Std. 3.05 mm
3
Layer 3 dead volume mm 1562
Layer 3 needle length mm 15
PRODUCTION
Electrospinning equipment
o Easy Spin
o Starter kit
o Rotary-sliding mandrel system
o High voltage modular syringe pumps
o Coaxial needles, double and triple layer dismountable and disposable
o Air and syringe heating systems up to 400°C
o Shaped collectors and screens for directing electrical field
o Fitting out of complete systems and hoods for experiments on request
Bioreactors for cell culture
o Perfusion with innovative flexible flow system
o Rotating walls with single and dual culture chamber
o Digital peristaltic pumps adjustable up to 1/100,000 of maximum capacity.
Incubators for cell culture with heating at solid state and load from above
o 60 litres with load from above
o 60 litres with CO2 control IR measurement with compensation of environmental pressure
Contact us
LINARI ENGINEERING S.r.l.
Registered offices: via dei Colatori, 13 - 58024 Valpiana (Grosseto) - Italy
Manufacturing site: via Umberto Forti 24/14 - 56121 Pisa - Italy
VAT no.: IT01307760536