Beruflich Dokumente
Kultur Dokumente
Fluid Treatments
* Water well analysis: Salinity Cl- : 39,000 mg/l , Ca++: 600 mg/l, Mg++: 389, Total Hardness: 1180 mg/l.
* Fresh water analysis: Salinity: 300 mg/l -- Hardness: 120 mg/l.
.
Rig Activity
Washed down from 2915m to 2954m with 1500 lpm. Tagged top of cement at 2954m.Confirmed TOC by slacking of 5 tons twice. Drill out shoe track cement,
Plugs, Float Collar, Float Shoe and pocket from 2954 m to 2990 m. Drill out Float Collar @ 2959 m, Float Shoe @ 2985 m & rat hole to 2990 m.
Two passes to check & clear entire shoe track. Pump 5m3 hi vis. Cement hardness: moderately hard to hard. Drilled 8 1/2" hole in Nahr Umr Formation
in rotary mode from 2990 m to 3036m Average ROP 9-10 m/hr. No downhole losses. Current MW = 1.30 - 1.32 sg. Mark Top of Shuaiba at 3036m
- Pump 5m3 hi vis every connection. Drilled 8 1/2" hole in Shuaiba Formation in rotary mode from 3036m to 3089m with flow rate: - No downhole losses.
Current MW = 1.32 - 1.35 sg - Mark Top of Upper Shale at 3089m - Pump 5m3 hi vis. Drilled 8 1/2" hole in Upper Shale Formation in rotary mode from 3089m to 3194m
with flow rate: 2100-2200 lpm, SPP: 3100-3150 psi,WOB: 8-14 ton, TQ: 15-19K Ft-lb. RPM = 110 -150. Average ROP 16-17 m/hr. -
No downhole losses. Current MW in/out= 1.35 sg- Mark Top of Upper Sandstone at 3194m . Drilled 8 1/2" hole in Upper Sandstone Formation in rotary mode from 3194m to 3278m -
No downhole losses. Current MW in/out= 1.35 sg - Survey @ 3192.9m Inclination: 2.3 degree Azimuth: 217.36 degree
This report, the software, any data contained in this report and any interpretations based on this report are offered “as-is” and ”where-is.” There are no representations or warranties, expressed or implied, including implied warranties of merchantability and/or fitness for a particular purpose and or non-infringement. In no event will
Halliburton or its affiliates or suppliers be liable for any damages, whatsoever, including, but not limited to direct, indirect, consequential, incidental, special, punitive or exemplary damages (including, without limitation, loss of data, profits or use of hardware or software). Customer uses at their own risk.