Beruflich Dokumente
Kultur Dokumente
Washing Machine
Control panel
1 2 3 4 5 6
1. Programme selector
2. Pushbuttons and their functions
3. Display
4. "Add washing" light
5. "Start/Pause" pushbutton
6. "Time manager" pushbuttons
The symbols 1. Time manager
2. Temperature
3. Child safety
4. Cycle running : Prewash/Wash,
Rinse, Drain, Spin
5. Length of cycle or Timer delay count-
down
1 2 3 4 5
electrolux 3
Dispenser box
Prewash
Wash
Softener (do not fill above the MAX symbol M )
SAFETY INFORMATION
Please read these points carefully before in- • If the appliance is installed on carpeted
stalling and using your appliance. Keep this floor, ensure that the carpet does not ob-
user manual with your appliance. struct any ventilation ducts located at the
base of the appliance.
General safety
• The appliance must be equipped with an
• Do not modify or attempt to modify this earthed power plug which conforms to
appliance. This would put yourself in dan- regulations.
ger. • Before connecting your appliance to the
• Ensure that all coins, safety pins, brooch- power supply, carefully read the instruc-
es, screws etc have been removed be- tions in the chapter entitled “Electrical
fore starting a washing programme. If left connection”.
in washing, they can seriously damage • Replacing the power cable should only
the appliance. be carried out by an authorised service
• Use the recommended quantity of deter- engineer.
gent. • The manufacturer cannot be held re-
• Put small items together (socks, belts sponsible for any damage resulting from
etc.) in a small linen bag or pillow case. incorrect installation.
• Unplug and close inlet hose tap after us-
ing appliance. Precautions to be taken against frost
• Always disconnect the power supply If your appliance is exposed to tempera-
from the appliance before cleaning or tures below 0°C, the following precautions
maintenance. must be taken:
• Do not machine wash clothes with rib- • Close the tap and disconnect the inlet
bing, unfinished or torn material. hose.
• Place the end of this hose and the drain
Installation
hose in a basin on the floor.
• Unpack or ask for the appliance to be • Select the Drain programme let it run until
unpacked immediately upon delivery. the end of the cycle.
Check the outside of the appliance is not • Disconnect the appliance from the power
damaged in any way. Report all transit supply by turning the programme selec-
damage to your retailer. tor to “Stop” .
• Remove all transit bolts and packaging • Unplug the appliance.
before installing the appliance. • Replace the inlet hose and drain hose.
• Connection to the water supply must be This way, the water remaining in the hoses
carried out by a qualified plumber. will be drained away, avoiding any ice for-
• If your domestic electrical circuit needs mation which would damage your appli-
adapting to allow the appliance to be ance.
plugged in, use a qualified electrician. Before turning your appliance on again, en-
• Ensure that, after installation, the power sure that it is installed in an area where the
cable is not trapped under the appliance. temperature will not fall below freezing.
4 electrolux
PERSONALISATION
Child safety pliance memorises the selection of this op-
This option provides two types of locking : tion. To deactivate child safety, repeat the
• if the option is activated after the cycle process.
has started, no changes to the options or Audible signal
programme is possible.
When the audible signal is activated, it
The cycle runs and you must deactivate
sounds when a button is pressed, at the
the option to run a new cycle.
end of the programme, to indicate a fault.
• if the option is activated before the cycle
To deactivate, turn appliance on and press
has started, the appliance cannot be
started. “Prewash” and “Rinse plus” simulta-
To activate child safety, turn appliance on neously until the beep sounds. The signal is
only active if alarm sounds. To reactivate it,
and press “Rinse plus” and “Delay start”
repeat the same process.
simultaneously until the confirmation
symbol shows on in the display. The ap-
DAILY USE
Loading washing drum and the lid of your washing ma-
• Open the lid of chine.
the appliance. Warning! Before closing the lid of your
• Open the drum appliance, ensure that the drum is
by depressing properly closed :
the locking but- A • When the two shutters are closed,
ton A: The two • locking button A released.
shutters unlock
automatically. Proportioning of detergents
• Load the wash- Pour the amount of washing powder into
ing, close the the washing and prewash compart-
electrolux 5
Soil level Icon Type of fabric When the “Add washing” light is on, you
can add washing by proceeding as follows.
Intensive For heavy soiled
items Press the “Start/Pause” pushbutton :
the corresponding light will flash green while
Normal For normal soiled the appliance is paused. The lid can only be
items
opened around 2 minutes after the washing
Daily For daily soiled items machine has come to a stop. Press the
Light For slightly soiled “Start/Pause” pushbutton again to con-
items tinue the programme.
Modifying the programme in progress
Quick1) For very slightly
soiled items Before making any changes to the current
programme, you need to pause the wash-
Super quick1) For items used or ing machine by pressing the “Start/Pause”
worn for a short time
pushbutton. If the modification is not
Refresh1) 2) For refreshing items possible, “Err” flashes in the display and the
only
“Start/Pause” pushbutton flashes red for
Super re- 2) For refreshing a very a few seconds. If you still decide to change
fresh1) few items only the programme, you must cancel the cur-
1) To use on a half load. rent programme (see below).
2) The symbol flashes and disappears : this wash cycle
is a refresh cycle only.
Cancelling the programme
If you want to cancel the programme, turn
The availability of these different levels var- the programme selector to the “Stop” posi-
ies depending on the selected programme tion .
type.
End of the programme
Start of the programme
The washing machine stops automatically ;
Press the “Start/Pause” pushbutton to the “Start/Pause” pushbutton goes out
start the cycle ; the corresponding light will and “0” flashes on the display. The lid can
come on green. It is normal for the pro- only be opened around 2 minutes after the
gramme selector to remain stationary dur- washing machine has come to a stop. Turn
ing the cycle. The symbol for the current the programme selector to the “Stop”
cycle and the remaining time appear on the position. Remove washing. Unplug and
display. If a delayed start has been selec- close water inlet tap.
ted, the countdown appears on the display. Stand by : once the programme has finish-
Warming up ed after a few minutes the energy saving
system will be enabled. The brightness of
During the cycle, the symbol comes on
the display is reduced. By pressing any but-
when the appliance is reaching the right
ton the appliance will come out of the ener-
temperature.
gy saving status.
Interrupting a programme
Adding washing
PROGRAMMES TABLE
Programme / Type of washing Load Possible options
Cottons (cold - 90°) : White or colour, 5,5 kg Night silence plus, Prewash, Rinse
e.g. normally soiled work clothes, bed linen, plus, Time manager, Delay start
table linen, body linen, towels.
Synthetics (cold - 60°) : Synthetic fab- 2,5 kg Night silence plus, Prewash, Rinse
rics, body linen,fab, coloured farics, non-iron plus, Time manager, Delay start
shirts, blouses.
electrolux 7
Wool (cold - 40°) : Machine washable 1,0 kg Night silence plus, Delay start
wool carrying the labels “pure new wool, ma-
chine washable, does not shrink”.
Silk (cold - 30°) : Fabric machine wash- 1,0 kg Night silence plus, Delay start
able at 30°C.
Lingerie (cold - 40°) : For very delicate 1,0 kg Night silence plus, Delay start
items, like lingerie.
Rinse : Hand washed items can be 5,5 kg Night silence plus, Rinse plus, Delay
rinsed in this programme. start
Intensive sport (cold - 40°) : For dirty 2,5 kg Night silence plus, Rinse plus, Delay
outside sport clothes. The Prewash option is start
activated.
Sport (30°) : For sport clothes. 2,5 kg Delay start
1) Depending on model.
2) Reference programme for test confirming to EN60456 standard.
6 7
5
OPERATING PROBLEMS
Numerous checks were carried out on your refer to the sections below before contact-
appliance before it left the factory. Howev- ing the after-sales service.
er, should you notice a malfunction, please
Problems Causes
The washing machine • the appliance isn’t plugged in correctly, the electrical installation isn’t
doesn’t start or doesn’t working,
fill : • the lid of your appliance and the drum shutters aren’t closed firmly,
• the programme start command hasn’t been properly selected,
• there is a power failure,
• the water supply has been cut off,
• the water inlet tap is closed,
• the water inlet filters are dirty,
• a red tab appears on the water inlet hose1).
The appliance fills but • the drainage U-piece is fixed too low (see installation section).
empties straight away :
The washing machine • the drain hose is blocked or bent,
doesn’t rinse or doesn’t • the drainage filter is obstructed,
empty : • the out of balance detector has been activated : washing is unevenly
distributed in the drum,
• the “Drain” programme or “Night Silence Plus” or “Rinse hold” option
have been selected,
• the height of the drainage U-piece is unsuitable.
You have found water • too much detergent has caused foam to overflow,
around the washing ma- • the detergent is unsuitable for machine washing,
chine : • the drainage U-piece isn’t attached correctly,
• the drainage filter hasn’t been put back in place,
• the water inlet hose is leaking.
Wash is unsatisfactory : • the detergent is unsuitable for machine washing,
• there is too much washing in the drum,
• the wash cycle is unsuitable,
• there isn’t enough detergent.
electrolux 9
Problems Causes
The appliance vibrates, • all packaging have not been removed from the appliance (see installa-
is noisy : tion section),
• the appliance isn’t level and is unbalanced,
• the appliance is too close to the wall or furniture,
• washing is unevenly distributed in the drum,
• the load is too small.
The wash cycle is much • the water inlet filters are dirty,
too long : • the power or water supply has been cut off,
• the motor overheating detector has been activated,
• the water inlet temperature is lower than usual,
• the foam detection security system has been activated (too much de-
tergent) and the washing machine has begun draining the foam,
• the out of balance detector has been activated: an extra phase has
been added to distribute washing more evenly in the drum.
The washing machine • the water or electricity supply is defective,
stops during a wash cy- • a Rinse hold has been selected,
cle : • the drum shutters are open.
The lid doesn’t open at • the “immediate opening”1) light is not lit,
the end of the cycle : • the temperature inside the drum is too high,
• the lid unlocks 1 - 2 minutes after the end of the cycle1).
The E40 error code ap- • the lid is not closed properly.
pears in the display2)
and the “Start/Pause”
pushbutton flashes red
3) :
are no restrictions on the use of powder de- must be added via means of a dosing ball.
tergents. Liquid detergents must not be Detergent tablets or doses must be placed
used when a prewash or the reference pro- in the detergent compartment of your appli-
gramme (see Programmes table) has been ance's dispenser box.
selected. For cycles without prewash, they
TECHNICAL SPECIFICATIONS
DIMENSIONS Height 850 mm
Width 400 mm
Depth 600 mm
LINE VOLTAGE /FREQUENCY 230 V / 50 Hz
POWER CONSUMPTION 2300 W
WATER PRESSURE Minimum 0,05 MPa (0,5 bar)
Maximum 0,8 MPa (8 bar)
Connection to water supply Type 20/27
INSTALLATION
Remove all protective packaging for transit Untying
before using for the first time. Keep in case A B
needed for future transit: Transporting a A
non-secured appliance may damage inter-
nal components and cause leakages and C
malfunctions. The appliance can also be
damaged through physical contact. D
Unpacking
1 1
2
2 2 B 1
2
1
1
1 D
2
C
2 1
ENVIRONMENT CONCERNS
The symbol on the product or on its collection site (enquire at your local
packaging indicates that this product may council) for collection and recycling.
not be treated as household waste. Instead When disposing of your appliance, re-
it should be taken to the appropriate move all parts which could be danger-
collection point for the recycling of electrical ous to others: cut off the power supply
and electronic equipment. By ensuring this cable at the base of the appliance.
product is disposed of correctly, you will Protecting the environment
help prevent potential negative
consequences for the environment and To save water and energy and there-
human health, which could otherwise be fore help protect the environment, we
caused by inappropriate waste handling of recommend the following:
this product. For more detailed information • Whenever possible, use the appli-
about recycling of this product, please ance at full capacity and avoid partial
contact your local council, your household loads.
waste disposal service or the shop where • Only use the prewash and soak pro-
you purchased the product. grammes for heavily soiled items.
• Use an appropriate amount of deter-
Disposing of the appliance gent for the hardness of the water,
All materials carrying the symbol are the size of the load and how soiled
recyclable. Dispose of them at a waste the washing is.
www.electrolux.com/shop
108526702-A-142011