Beruflich Dokumente
Kultur Dokumente
Storage management
system proposal
Problem:
Improvement:
Size:
Type: Shinko/
FT/ Others
Qty:
Date:
By:
Representation of form colour:
1. Green – Good
2. Orange – Stained
3. Pink – Pitted
4. White – Crack or can be anything.
1. Take out one size of former first, separate according to Left and Right. (2 side)
2. Do one side first, separate out according to manufacturer. (3 sides)
3. For one type of manufacturer, separate out according to the condition. (4 pellets)
(Remark: However, this plan only can be executed once all formers are being segregated
properly according to size, currently there are too many mixed up pellets.)
1. Workers take out one pellet of formers, segregate accordingly to the size, the side, the
type and the condition.
2. Every carton is labelled properly using different type of colour which represent the
condition.
3. For HCT former, there are prepared pellets for the location of done carton from 6.5 L
and R until 8 L and R whereas for that of FT formers, available for 6.5 L and R until
7.5 L and R only. The remaining formers are located at the space available in the
store.
4. Since the segregation is made according to carton by carton, therefore all the cartons
of the same size are located together omitting the conditions. When certain number of
stacks of cartons is reached, the segregation will be made according to the condition,
which only requires very little time to do.
Layout of Storage House: