Beruflich Dokumente
Kultur Dokumente
Topics:
5 Two Way Slabs on Columns
6 Shear
TWO WAY SLAB -
ANALYSIS AND DESIGN
Two way slab systems with multiple spans
Simplified method– multiple span two way slabs
– [6.10.4]
Moments found by using factors
Rectangular support grid (of columns Simplified method & idealized frame
or beam & slab system supported on [6.9] overlap: in distribution of
columns) moments in the design strips [6.9.5.3]
MNI
Mo 0.65 Mo
MNE
0.65Mo
+
MM
0.35Mo
End Span: Table 6.10.4.3 (A)
Table 6.10.4.3(A) end span –
the end moment at the exterior end is usually less than the moment at
the interior end
also the amount of negative moment attracted to the exterior edge of
an end span depends upon the degree of restraint of the edge - fully
restrained edges attract more negative moment and reduce mid span
positive moment
MNI
Mo 0.80-0.65 Mo
MNE
0.0 – 0.65 Mo
+
Column strip
Reference Tables 18.3 & 18.4 of text – flat slab and slab-beam
column strip moment factors are separated & description of each
given
Example : flat slab design
• Refer to handouts and lecture overheads
Design Considerations:
• Minimum Reinforcement:
• [9.1.1]