Beruflich Dokumente
Kultur Dokumente
Hydraulic Excavator
4
Skylight. A unique large polycarbonate Special joysticks for
skylight provides very good upward tool control options.
visibility, especially useful in above
ground applications.
Multipro
The Multipro manages the engine and hydraulics for maximum performance and enhanced
monitoring capabilities through a new user friendly interface.
5
Hydraulics
Fast cycle times and high bucket and stick forces combine to maximize your
productivity in any job.
6
Cat 3054E ATAAC Engine
The four-cylinder turbocharged engine is built for power, reliability and easy maintenance.
7
Undercarriage and Structure
315C L structural components and undercarriage are the backbone
of the machine’s durability.
Rollers and Idlers. Sealed and Upper frame. Rugged main frame is
lubricated track rollers, carrier rollers designed for maximum durability and
and idlers provide excellent service life, efficient use of materials.
to keep the machine in the field longer. Upper frame utilizes curved side rails,
selection enables the machine to the main frame and are formed, rather
Structures. The 315C L structural automatically change up and down than fabricated, for superior strength
components and undercarriage are the from high and low speeds in a smooth, and reduced weight.
backbone of the machine's durability. controlled manner. Boom tower and main rails are
8
Maximum uptime – Service and Maintenance
Extended Service Intervals and Easy access reduce operating costs.
9
Booms, Sticks, Buckets and Teeth
The 315C L has designed-in flexibility to help bring total solution for higher production and
efficiency to your jobs.
1 2
10 11 12 13 14 15 16 17 18
The right combination for the job. Variable Angle Boom. A new variable Pin-on version and Quick Couplers.
Select the right combination for the job angle boom (VA) with a significantly All Cat buckets are available in both
with your Cat dealer and you’ll help reduced weight, for vertical wall digging, quick coupler and pin-on version.
ensure top production from the start. working near obstacles or in tight
1 Excavation Bucket. Digs and loads soft
quarters. The variable geometry boom
Booms and sticks. Caterpillar excavator to medium materials such as clay and
offers flexibility and versatility in the
booms and sticks are built for earth. Features weld on tip adapters,
working envelop. With full extension,
performance and long service life. hardened cutting edge and side bars.
the working range gives both maximum
Large, welded, box-section structures
dig depth and reach above ground. 2 Extreme Excavation Bucket. Digs and
with thick, multi-plate fabrications in
Equally, when the VA boom is retracted, loads compact/abrasive materials like
high-stress areas.
it can work closer to its tracks, increase earth/rock, sand/clay, sand/gravel, coal,
Construction allows structures to flex
lifting capacity and work in confined chalk and low abrasion ores. Features
and dissipate stresses.
areas. All hydraulic adjustments to the abrasion resistant steel for all wear parts.
Two standard booms and four sticks. VA boom angle can be made from the
3 Ditch Cleaning Bucket. Wide, light
The choice of two standard application cab during a work cycle for true
bucket used mainly with long reach
booms and four sticks plus a wide versatility.
configurations to clean waterbeds
selection of buckets and attachments,
Short stick. Short stick for mass and banks.
means the 315C L offers several
excavation and maximum breakout
combinations of reach and digging K Series Tip Selection. The new Caterpillar
force bucket up to 1.35 m3.
forces for optimum versatility. K Series Tooth System holds tighter,
Medium stick. Medium stick for changes easier and stays sharper.
One-piece boom. One-piece boom for
maximum versatility bucket up to 1.2 m3. 10 General Duty
all standard applications.
11 Extra Duty
Long stick. Long stick for all standard
12 Penetration
applications bucket up to 1.05 m3.
13 Penetration Plus
Extra long stick. Extra long stick for 14 Heavy Penetration
maximum reach and digging depth. 15 Heavy Abrasion
Bucket up to 0.80 m3. 16 Wide
17 Spike
Linkage Bearings. New bearing
18 Double Spike
technology has extended the front
linkage greasing intervals for all
bearings, up to 1000 hours for the
boom and stick and up to 100 hours
for the bucket.
10
Work Tools Matching Guide
When choosing between various work tool models that can be installed onto the same machine configuration,
consider work tool application, productivity requirements, and durability.
Refer to work tool specifications for application recommendations and productivity information.
315C L
Multi-Grapples
G315B-D × × ×
G310B-R
G315B-R × × ×
5 tines GSH15-400
4 tines GSH15-400
5 tines GSH15-500 × ×
4 tines GSH15-500
Orange Peel Grapples
5 tines GSH15-600 × × ×
4 tines GSH15-600
5 tines GSH15-800 × × × × × × × × × ×
4 tines GSH15-800 × × × × ×
Multi-Grapples
G315B-D × × × × × × × ×
G310B-R
G315B-R × × × × × × × × ×
* Boom Mounted 360° Working Range Maximum Material density 1800 kg/m3
Over the front only Maximum Material density 1200 kg/m3
Available × Not recommended
EEC 80/1269 83 kW/113 hp Pilot System right pedal and lever control right
Bore 105 mm track
Maximum flow 23.7 l/min
when idlers are in front, pushing both
Stroke 127 mm Maximum pressure 4120 bar pedals or levers forward moves the
Displacement 4.4 liters Cylinders, Bore and Stroke excavator straight ahead
Cylinders 4 Boom (2) 110 x 1193 mm when the idlers are in front, rocking
All engine horsepower (hp) are metric Stick (1) 120 x 1331 mm both pedals or pulling both levers
including front page. Bucket backward moves the excavator
Net power advertised is the power straight back
small/medium
moving one pedal or lever more than
available at the flywheel when the stick 110 x 1048 mm
engine is equipped with fan, air the other, either forward or backward,
long/extra long
cleaner, muffler, and alternator. results in a gradual turn
stick 100 x 1048 mm moving one pedal or lever forward
No engine derating required below
2300 m altitude. and the other pedal or lever backward
Meets Stage II EU Emission counter-rotates the tracks for spot turns
Directive 97/68/EC.
L
C M
®
K A
D
J
E H
F G
B
mm mm mm
A Shipping height (with bucket)* C Tail swing radius 2345 H Track gauge 1990
Short stick 2817 D Swing ground clearance 1010 J Ground clearance 460
Medium stick 2760 E Length to centers of rollers 3170 K Cab height 3000
Long stick 2847 F Track length 3960 L Overall width with
Extra Long stick 2966 G Shipping width mirrors installed 2820
B Shipping length with 500 mm shoes 2490 M Shipping width upper frame 2550
Short stick 8454
Medium stick 8394
Long stick 8411
Extra Long stick 8870
* may be limited by cab height (K)
Bucket Specifications
Contact your Caterpillar dealer for special bucket requirements.
➤ A ➤ ➤ B ➤
8
A Maximum Digging Depth 5273 5673 6023 6253
7
B Maximum Reach
6 ➤
at Ground Level 8009 8388 8708 9109
5 C Maximum
C
4 Cutting Height 8530 8762 8935 9004
3 D Maximum
➤
1
E E Minimum Loading Height 3122 2722 2372 1872
F Maximum Digging
➤➤
0
➤
➤
7
10 9 8 7 6 5 4 3 2 1 0 1 m
Working Ranges
With Variable Angle Boom (VA)
9
A Maximum Digging Depth 4654 5057 5399 5845
8
B Maximum Reach
7
at Ground Level 7973 8357 8683 9097
➤
6 C Maximum
5 C Cutting Height 9493 9820 10 089 10 395
4 D Maximum
D
➤
0 ➤
➤
➤
G Maximum Vertical
➤
B
1
G 1850 mm
Wall Digging Depth 3121 3523 3881 4357
2 A
F
2250 mm Bucket Tip Radius 1117 1117 1117 1117
2600 mm
➤
7
10 9 8 7 6 5 4 3 2 1 0 1 m
Load Point Height Load Radius Over Front Load Radius Over Side Load at Maximum Reach
* Limited by hydraulic rather than tipping load.
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity
or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
Load Point Height Load Radius Over Front Load Radius Over Side Load at Maximum Reach
* Limited by hydraulic rather than tipping load.
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity
or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
Load Point Height Load Radius Over Front Load Radius Over Side Load at Maximum Reach
* Limited by hydraulic rather than tipping load.
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity
or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
Load Point Height Load Radius Over Front Load Radius Over Side Load at Maximum Reach
* Limited by hydraulic rather than tipping load.
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity
or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
Load Point Height Load Radius Over Front Load Radius Over Side Load at Maximum Reach
* Limited by hydraulic rather than tipping load.
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity
or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
Load Point Height Load Radius Over Front Load Radius Over Side Load at Maximum Reach
* Limited by hydraulic rather than tipping load.
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity
or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.