Sie sind auf Seite 1von 10

Escanear logo

MSDS-

MATERIAL SAFETY DATA SHEET

Fecha: July 07, 2009


Numero: RJSSH090764MSDSEU

Identidad (tal como se utiliza en la etiqueta y la lista)


Nombre del producto: Pañitos húmedos

Sección I – PRODUCTO QUIMICO Y LA IDENTIFICACION DE LA EMPRESA

Solicitante:
Yiwu Jiahua Daily Chemical co., Ltd.
Dirección (Calle, número, Ciudad, Estado y Código postal):
236# Av. Jingfa, Yiwu, Zhejiang

Persona de contacto: Demi Fan


Tel: +86 579-83819209
Fax: +86 579-83814341
E-mail: sale5@ywjiahua.com

Sección II – COMPOSICION/INFORMACION SOBRE LOS COMPONENTES

Nombre químico Cas No. Porcentaje %


Glicerina 56-81-5 1.00
Kazon NA 0.25
Tween 9005-64-5 0.10
Fragancia NA 0.02
Desinfección NA 0.70
Ácido cítrico 77-92-9 0.02
Aloe NA 0, 0005
Agua 7732-18-5 97.9095
100%

Sección III – Identificación de peligros

Resumen de emergencia: este producto sin riesgos para la salud especial informe del uso normal. Vías de
entrada:
Inhalación: Si Piel: Si Ingestión: Si Ojos: Si

Posibles efectos en la salud:

RJS PRUEBA DE ESTANDARES Y CERTIFICACION


CENTRO 141-04 14th Avenue, Whitestone, New York 11357, USA
Escanear logo
MSDS-

Ojo: Ningun riesgo normal. Puede causar irritación o inflamación de la conjuntiva y de la córnea en los casos más
graves.

Piel: Ningún riesgo normal. Enfermedad crónica de la piel por la exposición al producto puede producir dermatitis
(inflamación de la piel, de color rojo) para ciertas personas.

Ingestión: No se prevé una vía de exposición, dada la naturaleza del producto terminado. Sin embargo, la ingestión
puede causar irritación del tracto digestivo, nauseas, vómitos o dolor abdominal.

Inhalación: Ningún riesgo normal. La inhalación de grandes cantidades de vapores puede causar irritacion de las
vías respiratorias superiores y los pulmones.

Sección IV – MEDIDAS DE PRIMEROS AUXILIOS

Procedimientos de primeros auxilios:

Contacto con los ojos: Lavar los ojos a fondo con agua tibia durante 15 minutos. Si la irritación persiste,
consulte a un médico.

Contacto con la piel: enjuagar el área expuesta con agua. Si la irritación persiste, consulte a un médico.

Inhalación: Dejar área polvorienta. En casos raros, puede ocurrir una reacción respiratoria que puede incluir la
opresión de pecha y dificultad para respirar. Si esto ocurre, busque atención médica inmediatamente.

Otros: paquete de productos para el consumidor tiene la siguiente indicación de precaución:

Sección V – MEDIDAS DE LUCHA CONTRA INCENDIOS

Punto de inflamación (método utilizado): N/A


Propiedades inflamables:
Límite de inflamabilidad superior: N/K
Límite Inferior de inflamabilidad: N/K

Limites explosivos: UEL: N/A LEL: N/A

Temperatura de autoinflamación: N/A

Los productos de combustión peligrosos N/K

Explosión de datos (Sensibilidad al impacto mecánico): N/K

Explosión de datos (Sensibilidad a la descarga estática): N/K

Medios de extinción:

Adecuado: CO2 , el agua o polvo quimico seco


Inadecuado: NK

RJS PRUEBA DE ESTANDARES Y CERTIFICACION


CENTRO 141-04 14th Avenue, Whitestone, New York 11357, USA
Escanear logo
MSDS-

Protección de los bomberos:


Peligros específicos derivados del material: N/K

Equipo de protección y precauciones para los Bomberos: Los bomberos deberán estar equipados con un aparato
de respiración autocontenido para proteger contra posibles humos irritantes o sensibilizantes.

Sección VI – MEDIDAS DE ESCAPE ENTAL

Metodo de limpieza:

Recoja el líquido en un recipiente adecuado o absórbalo con un material inerte (por ejemplo, vermiculita, arena
seca, tierra) y colóquelo en un recipiente para desechos químicos. Limpiar cuidadosamente la superficie para
eliminar los residuos de la contaminación.

Otras precauciones:

Evitar respirar los vapores. No deje que entre en los ojos, la piel o la ropa, lávese bien después de manipular y
antes de comer y beber. Mantener fuera del alcance de los niños. No ingerir.

Agente neutralizante:
Ninguno especificado por el fabricante.

Sección VII: Manipulación y almacenamiento

Precauciones personales:
No se requieren medidas especiales de precaución en el uso normal.

Prevención de incendios y explosiones:


No requiere medidas especiales de protección técnicas especiales en condiciones normales de uso.

Almacenamiento:
Almacenar en un lugar fresco y bien ventilado lejos de toda fuente de ignición y fuera de la luz directa del sol.
Mantenga el recipiente herméticamente cerrado. Proteger de daños físicos. Minimizar la exposición del aire. Evitar
chispas, llamas y otras fuentes de ignición. Ponerlo suavemente al embalaje y transporte, evitar el embalaje y
envase de daños. Mantener fuera del alcance de niños y mascotas.

Sección VIII: CONTROLES DE EXPOSICION/PROTECCION PERSONAL


Médicas agravadas por la exposición: Ninguna.

Ventilación: Buena ventilación general (normalmente 10 cambios de aire por hora) debe usarse. Las tasas de
ventilación debe corresponder a las condiciones.

Protección respiratoria: Ninguno debe ser necesaria en el uso normal.

Protección de los ojos: Ninguno debe ser necesaria en el uso normal.

Protección de la piel y del cuerpo: Ninguno debe ser necesaria en el uso normal.

RJS PRUEBA DE ESTANDARES Y CERTIFICACION


CENTRO 141-04 14th Avenue, Whitestone, New York 11357, USA
Escanear logo

MSDS-
Instalaciones de descontaminación recomendadas: Ducha de seguridad, ojos lavar, instalaciones de lavado,
según proceda, a condición de uso es encomiable.

El trabajo de prácticas higiénicas: Lávese bien después de manipular y antes de comer, beber o fumar.

Controles de ingenierías: Ninguna se requiere en condiciones normales de uso.

Sección IX – PROPIEDADES FISICAS Y QUIMICAS

Aspecto: Solido.
Solubilidad en agua: no soluble en agua.
Punto de inflamación: No hay datos.
Punto de ignición: N/A

Estabilidad:
El producto es estable bajo condiciones normales.

Incompatibilidad:
Evite el contacto con decolorantes y fuertes oxidantes. Evitar el calor, chispas y llamas.

Polimerización peligrosa:
No se produce la polimerización peligrosa.

Condiciones que deben evitarse:


La exposición directa a la luz solar, calor excesivo y daños físicos.

Corrosivo para los metales:


No corrosivos.

Seccion XI – Information toxicologica


Efectos crónicos: no informaron efectos crónicos en la salud.
Órganos diana: órganos diana no reportado.
Carcinogenicidad: Este producto acabado para el consumo no es cancerígeno.
NTP: Ninguna
EI CIIC: No

Seccion XII – Informacion ecologica

Toxicidad ambiental:
Sobre la base de la ecotoxicidad y suerte datos químicos los ingredientes en este producto se espera que no dañan
el medio ambiente cuando se eliminan mediante rutas normales de uso. Los tensioactivos en este detergente son
fácilmente biodegradables y bien retirados durante el procesamiento de tratamiento de aguas residuales.

Sección XIII – Consideraciones de eliminación

Metodo de eliminación de residuos: eliminación debería ser de acuerdo con autoridades federales,
estatales/provinciales Y LAS REGULACIONES LOCALES.

RJS PRUEBA DE ESTANDARES Y CERTIFICACION


CENTRO 141-04 14th Avenue, Whitestone, New York 11357, USA
Escanear logo

MSDS-

Sección XIV – INFORMACION DE TRANSPORTE

DOT el nombre correcto de la expedición: No regulado


Grupo de embalaje: III (menor riesgo).
Clasificación: Material no regulados.
Clase de peligro: no regulado.
Número de Identificación: no aplicable.
IATA/ICAO: Clase no regulados.
Códigos de emergencia de la ONU: no regulado.

Seccion XV – Informacion legal

Mientras que el producto acabado no se consideran peligrosos según lo definido por la OSHA 29 CFR 1910.1200
(d), esta MSDS contiene valiosa información crítica para el manejo seguro y el uso correcto del producto.

Estados Unidos:
Todos los componentes añadidos intencionalmente de este producto figuran en el inventario de la TSCA
NOSOTROS.
Número de registro de la EPA: No aplicable.
SARA 313/302/304//311/312 productos químicos: Ninguno

California: Este producto ha sido evaluado y no requieren etiquetas de advertencias en California proposición 65.

Numero de registro de California: No aplicable.

Capitulo XVI – Otra informacion

*NK. – No conocido

La informacion anterior se considera precise y representa la major informacion actualmente disponible para
nosotros. Sin embargo, no hacemos ninguna garantía de comerciabilidad o cualquier otra garantía, expresa o
implícita, con respecto a dicha información, y no asumimos ninguna responsabilidad derivada de su uso. Los
usuarios deberían realizar sus propias investigaciones para determinar la idoneidad de la información para sus
fines particulares. En ningún caso la empresa será responsable de las reclamaciones, pérdidas, daños o perjuicios
de cualquier tercero, o por lucro cesante o cualquier daño especial, indirecto, incidental, consecuente o ejemplar
daños, derivada, incluso si la empresa ha sido aconsejado de la posibilidad de tales daños.

Nota
Esta hoja de datos de seguridad de materiales (MSDS) es para orientación y se basa en la información y las
pruebas consideradas fiables. RJS Pruebas Estándar & Centro de Certificación no garantiza la exactitud ni la
integridad de los datos y no será responsable por ningún daño relacionado. Los datos se ofrecen exclusivamente
para su examen, investigación y verificación. RJS Pruebas Estándar & Centro de Certificación no asume ninguna
responsabilidad legal por el uso o la confianza en estos datos.

RJS PRUEBA DE ESTANDARES Y CERTIFICACION


CENTRO 141-04 14th Avenue, Whitestone, New York 11357, USA
Escanear logo MSDS- PAGE 1 of 5

MATERIAL SAFETY DATA SHEET

DATE: July 07, 2009


NUMBER: RJSSH090764MSDSEU

IDENTITY (As Use don Label and List)


Product Name: wet wipes

SECTION I – CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Applicant:
Yiwu Jiahua Daily Chemical co., Ltd.

Address (Number, Street, City, State, and ZIP Code):


236# Jingfa Av., Yiwu, Zhejiang

Contact Person: Demi Fan


Tel: +86 579-83819209
Fax: +86 579-83814341
E-mail: sale5@ywjiahua.com

SECTION II - COMPOSITION/INFORMATION ON INGREDIENTS

Chemical name Cas No. Percent%


Glycerin 56-81-5 1.00
Kazon NA 0.25
Tween 9005-64-5 0.10
Fragance NA 0.02
Disinfection NA 0.70
Citric Acid 77-92-9 0.02
Aloe NA 0, 0005
Aqua 7732-18-5 97.9095

SECTION III – HAZARDS IDENTIFICATION

Emergency Overview: This product with no special health hazards reported from normal use.
Routes of Entry:
Inhalation: Yes Skin: Yes Ingestion: Yes Eyes: Yes

Potential Health Effects:


Eye:

RJS STANDARDS TESTING & CERTIFICATION CENTER


141-04 14th Avenue, Whitestone, New York 11357, USA
Escanear logo

MSDS- PAGE 2 of 5

No normal hazard, May cause irritation and corneal or conjunctiva inflammation in severe cases.

Skin:
No normal hazard. Chronic skin over-exposure to the product may produce dermatitis (red, inflamed skin) for
certain person.

Ingestion:
Not an anticipated route of exposure given the nature of the finished product. Nonetheless, ingestion may cause
irritation of digestive tract, nausea, vomit or abdominal pain.

Inhalation:
No normal hazard. Inhalation of large amounts of vapors may cause irritation of the upper respiratory tract and
lungs.

SECTION IV – FIRST AID MEASURES

First Aid Procedures:


Eye Contact: Flush eyes thoroughly with lukewarm water for 15 minutes. If irritation persists, consult a
physician.

Skin Contact: Rinse exposed area with water. If irritation persists, consult a physician.

Inhalation: Leave dusty area. In rare cases a respiratory reaction can occur which may include tightness
of chest and difficulty breathing. If this occurs, seek medical attention immediately.

Other: Consumer product package has the following precautionary statement:

SECTION V – FIRE FIGHTING MEASURES

Flash Point (Method Used): N/A


Flammable Properties:
Upper Flammable Limit: N/K
Lower Flammable Limit: N/K

Explosive Limits: UEL: N/A LEL: N/A


Auto-Ignition Temperature: N/A
Hazardous Combustion Products: N/K
Explosion Data (Sensitivity to Mechanical Impact): N/K
Explosion Data (Sensitivity to Static Discharge): N/K

Extinguishing Media:
Suitable: CO2 , water, or dry chemical
Unsuitable: NK

Protection of Firefighters:
Specific Hazards Arising from the Material: N/K
Protective Equipment and Precautions for Firefighters should be equipped with self-contained
Breathing apparatus to protect against potentially irritating or sensitizing fumes.

RJS STANDARDS TESTING & CERTIFICATION CENTER


141-04 14th Avenue, Whitestone, New York 11357, USA
Escanear logo

MSDS- PAGE 3 of 5
SECTION VI – ACCIDENTAL RELEASE MEASURES

Methods for Cleaning up:


Collect liquid in an appropriate container or absorb with an inert material (e.g., vermiculite, dry sand, earth), and
place in a chemical waste container. Clean surface thoroughly to remove residual.

Other Precautions:
Avoid breathing vapors. Do not get in eyes, on skin or on clothing, Wash thoroughly after handling and before
eating or drinking. Keep out of reach of children. Do not ingest.

Neutralizing Agent:
None specified by manufacturer.
SECTION VII – HANDLING AND STORAGE

Personal Precautions:
No special precaution measures required in normal use.

Prevention of Fire and Explosion:


No special technical protective measures required in normal use.

Storage:
Store in a cool, well-ventilated area away from all source of ignition and out of direct sunlight. Keep container tightly
closed. Protect from physical damage. Minimize exposure to air. Avoid sparks, flames and other ignition sources.
Put it lightly when packing and transport, prevent the packing and container from damage. Keep out of reach of
children and pets.

SECTION VIII – EXPOSURE CONTROLS/PERSONAL PROTECTION

Medical Aggravated by Exposure: None.

Ventilation: Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should
be matched to conditions.

Respiratory Protection: None should be needed in normal use.


Eye Protection: None should be needed in normal use.
Skin and Body Protection: None should be needed in normal use.

Recommended Decontamination Facilities: Safety shower, eyes wash, washing facilities as appropriate to
condition of use is commended.
Work Hygienic Practices: Wash thoroughly after handling and before eating, drinking or smoking.
Engineering Controls: None required in normal use.

SECTION IX – PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Solid.
Solubility in Water: Non-soluble in water.
Flash Point: No data.
Ignition Point: N/A

RJS STANDARDS TESTING & CERTIFICATION CENTER


141-04 14th Avenue, Whitestone, New York 11357, USA
Escanear logo

MSDS- PAGE 4 of 5
SECTION X – STABILITY AND REACTIVITY

Stability:
The product is considered stable under normal conditions.

Incompatibility:
Avoid contact with decolourants and strong oxidizers. Avoid heat, sparks and flame.

Hazardous Polymerization:
Hazardous polymerization does not occur.

Conditions to Avoid:
Direct sunlight, excessive heat and physical damage.

Corrosive to Metals:
Not corrosive.

SECTION XI – TOXICOLOGICAL INFORMATION

Chronic Effects: No chronic health effects reported.


Target Organs: No target organs reported.
Carcinogenicity: This finished consumer product is not carcinogenic.
NTP: No
IARC: No

SECTION XII- ECOLOGICAL INFORMATION

Environmental Toxicity:
Based on ecotoxicity and chemical fate data the ingredients in this product are not expected to harm the
environment when disposed of through normal routes of use. The surfactants in this detergent are readily
biodegradable and well removed during sewage treatment processing.

SECTION XIII – DISPOSAL CONSIDERATIONS

Waste Disposal Method: DISPOSAL SHOULD BE IN ACCORDANCE WITH FEDERAL.


STATE/PROVINCIAL AND LOCAL REGULATIONS.

SECTION XIV – TRANSPORT INFORMATION

DOT Proper Shipping Name: Not regulated.


Packing Group: III (minor danger).
TDG Classification: Non-regulated Material.
Hazard Class: Not regulated.
Identification Number: Not applicable.

RJS STANDARDS TESTING & CERTIFICATION CENTER


141-04 14th Avenue, Whitestone, New York 11357, USA
Escanear logo

MSDS- PAGE 5 of 5
IMO: Not regulated.
IATA/ICAO CLASS: Not regulated.
UN Hazard Codes: Not Regulated.

SECTION XV – REGULATORY INFORMATION

While the finished product is not considered hazardous as defined by OSHA in 29 CFR 1910. 1200(d), this MSDS
contains valuable information critical to the safe handling and proper use of the product.

United States:
All intentionally added components of this product are listed on the US TSCA Inventory.
EPA Registration Number: Not Applicable.
SARA: 313/302/304/311/312 chemicals: None

California: This product has been evaluated and does not require warning labeling under. California Proposition
65.

California Registration Number: Not applicable.

SECTION XVI – OTHER INFORMATION

*NK. – Not Known

The information above is believed to be accurate and represents the best information currently available to us.
However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such
information, and we assume no liability resulting from its use. Users should make their own investigations to
determine the suitability of the information for their particular purposes. In no way shall the company be liable for
any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential
or exemplary damages, howsoever arising, even if the company has been advised od the possibility of such
damages.

NOTE
This Material Safety Data Sheet (MSDS) is for guidance and is based upon information and test believed to be
reliable. RJS Standard Testing & Certification Center makes no guarantee of the accuracy or completeness of
the data and shall not be liable for any damages relating there to. The data is offered solely for your consideration,
investigation, and verification. RJS Standard Testing & Certification Center assumes no legal responsibility for
use or reliance upon this data.

RJS STANDARDS TESTING & CERTIFICATION CENTER


141-04 14th Avenue, Whitestone, New York 11357, USA

Das könnte Ihnen auch gefallen