Beruflich Dokumente
Kultur Dokumente
1.- How is called the destructive test that measures the resistance of the
flexion?
-Flexion test
- Construction industry
-Aerospace industry
-Automotive industry
3.- What is the norm that mention the flexibility properties of rigid and semi-
rigid products?
- ISO 178-2010
-Yes
-2 methods (A and B)
6.- the iso 14125 standard talks about Flex properties of fiber reinforced
plastic compounds?
-Yes
-Yes
8.- What is the minimum length that the test piece should have?
- 400mm
9.- What is the maximum width that the specimen must have?
-50mm
10.- What is the maximum thickness that the test piece should have?
- 25,4 mm
11.- ASTM D3043-17 mentioned that all methods are applicable to materials
with relatively uniform strength and stiffness properties?
-Yes
12.- What is the first point that must be determined before starting the test?
13.- What should be done after determining the material to be used in the
test?
- Vernier calibrator
-Constant
- Universal machine
-Leather gloves
-Seafety glasses
-Overalls
-Iron
-Concrete
-Brick
-Wood
-Universal machine
-Load cell
-Vernier
-Computer
-It’s an effective and accurate device used for measuring the deflection of
flexible pavements under moving wheel loads.
-By measuring the rebound deflection of the road, as the truck loads the
formation, moves off and the beam measures the road returning to the
unloaded position