Beruflich Dokumente
Kultur Dokumente
MODEL: AC-MTR-TK03A
DESCRIPTION
The AC-MTR-TK03A is a robust, user –friendly and self contained training
system that teaches the basic fundamental, characteristics and operation of
various commonly used electrical AC motor including both single phase and
three phase motors. Training modules are well organized and clearly
described to enable user to access with ease. The trainer is equipped with
various control devices and power supply to facilitate circuit/wiring
construction and operation of various motor. The system also comes with a
comprehensive lab manual with guided steps to demonstrate theory
practices and application. Benchtop mounting frame provided for
organizing lab experiment study modules. All connection using safety
connecting leads.
SPECIFICATION
STUDY TOPICS COVERAGE
• Characteristics and working principles of a single phase AC induction • Measuring the voltage/current of electrical motor set
motor • Testing the motor speed
• Characteristics and working principles of a three phase AC induction • Using applicable motor starter circuits to control its operation
motor • Start/Stop/Jog motor control
• Characteristics and working principles of a three phase AC slip ring • Star(Wye) – Delta wiring connection of a 3 phase induction motor
motor • Motor speed measurement and testing
• Characteristics and working principles of a three phase AC synchronous • Familiarization and operation of a 3 phase synchronous motor/machine
motor • Using the 3 phase synchronous machine as a voltage generator
• Implementing correct wiring connections for 3 phase and single phase • Fault-finding and troubleshooting techniques and approach
electrical motor operation • Power characteristics of AC motors
• Using Thermal overload relay as a protection device
POWER SUPPLY INPUT CONTROL SWITCH CONTROL MODULE THREE PHASE VARIABLE AC VARIABLE DC POWER SUPPLY
POWER SUPPLY
ITEM: PTS-100-01 ITEM: PTS-100-15 ITEM: PSU-3P-01 ITEM: PSU-301-1
• Input Voltage:415VAC/50Hz • 2 x ON pushbuttons(NO) • On/Off selector switch x1 • Input 240VAC
• On/Off mains switch • 2 x OFF pushbuttons(NC) • Pilot lamp indicator (R/Y/B) • Output: 0 ~ 30VDC/3A max.
• RCCB (In 40A/0.03A I∆n) • 1 x Emergency Pushbutton • Resettable fuse protection(6A) • Digital display for voltage/current
• Resettable fuse protection • 1 x Selector Switch( 3 pole) • Digital voltage indicator • Fuse protection
• Pilot lamp indicators(L1/L2/L3) • Adjustable control output (0 ~ • On/Off power switch
• 1 x BS13 switch sockets 450VAC) • 4mm safety binding post
• 1 x 5 pin CEE (16A) socket • 4mm safety sockets connectors
• 12 x 4mm safety sockets x10
DISTRIBUTED BY
TM
MEASUREMENT METER MODULE SWITCHABLE RESISTOR BANK DIGITAL TACHOMETER BENCH TOP MOUNTING FRAME
MODULE
ITEM: PM-01 ITEM: SRB-01 ITEM: DTM-01 ITEM: MFR-03
• Input: 240VAC • 0/40 Ohm/80 Ohm (100W) x 3 i. Photo Tach: • Material : Metal/Aluminum
• AC Voltmeter range: 0 to 500V units • 0.01RPM(2.5~999.99RPM) • Side Frame: T-Shape
• Panel size: 78mm x 42mm • Selector switch for switching • 0.1RPM(1,000~9,999.9RPM) • 2 layer
• 2 x Voltmeter • 4mm safety sockets • RPM(over 10,000RPM) • Size: approx. 1400mm(L)
• AC Ammeter range: 0 to 10A
• Panel size: 78mm x 42mm ii. Contact Tach:
• 2 x Ammeter • 0.01RPM(0.5~999.99RPM)
• 0.1RPM(1,000~9,999.9RPM)
• 1RPM(over 10,000RPM)
KILOWATT METER POWER FACTOR METER 4mm SAFETY CONNECTING LEADS USER AND LAB EXPERIMENT
MANUAL
ITEM: KWM-01 ITEM: PFM-01 ITEM: 4MM-SCL ITEM: AC-MTR-MNL
• Measuring range: 0 - 1kW • Range: 0.5(Lag) ~ 1 ~ 0.5(Lead) • 4mm safety connecting leads set • User Manual x1
• 4mm safety sockets • Lab Experiment Manual x1
• Manuals written in English
SPECIFICATION
OTHER ACCESSORIES
1. Motor Base mPlate
2. Motor couplings
WARRANTY
1 year warranty against manufacturing defects
GENERAL TERMS
1. Accessory are provided (where applicable)
2. Manual are included
3. Training will be provided(where applicable)
4. Design and specification are subjected to changes without notice
DISTRIBUTED BY
DISTRIBUTED BY
TM