Beruflich Dokumente
Kultur Dokumente
SAFETY NOTES
Installation
Ⅱ
Install the Conveying Pipe
Checklist:
Printer x1
Glue stick x1
Power supply x1
Consumable x1
Ⅲ
Bottom plate x1
Place the Bottom Plate
Storage card (optional) x1
01 02
Mini 3D Printer
Installation
Ⅳ
Feeding
4. Hang the material disk on the hook
on side of the printer (notice the
arrangement of the stock level, and do
not tie a knot).
Ⅴ
Inserting the Card
Ⅵ
Plug in and Power on
03 04
Mini 3D Printer
1. The display screen displays the main interface after starting up;
Suspending printing
3. Rotate the knob, and move the choice box to Continuing printing
“printing document”, and press the knob to
enter into the submenu; ★ This function is only applicable to the continuing of printing after suspending printing in condition of
continuous power on.
05 06
Mini 3D Printer
High quality printing consumables are selected for this printer, and this function is not needed in normal
Stopping printing conditions. If you select other consumables, the sprayer nozzle may be blocked due to impurities in the
material or other reasons, in which condition this function can be utilized.
★ It is not available to continue printing after stopping printing, and please be cautious when using this
function.
2. Rotate the knob, and move the choice 2. Rotate the knob, and move the choice
box to “stopping printing”, and press box to “heating the printing head”,
the knob to stop printing, and it is and press the knob to enter into the
impossible to continue printing after operation;
stopping printing.
3. “In processing, and please wait”
appears on the interface; at this time, the
printer is heating the sprayer, and please
wait patiently;
07 08
Mini 3D Printer
Printing Tips
Adjust the height of the sprayer nozzle 1. Avoid edge warping of the material:
In order to make the printing material attached to the bottom plate in a preferable way, apply a thin layer
The much too high or low sprayer nozzle will have influence on normal printing (in condition of much too of glue on the bottom plate before the commencement of the printing.
high sprayer nozzle, the printing material cannot stick on the bottom plate; in condition of much too low
sprayer nozzle, the sprayer nozzle will press the bottom plate, and the printing material cannot be
extruded). Adjust the positioning knob as per the following figure, and adjust the distance between the
sprayer nozzle and the bottom plate:
2. The TF card attached with the printer contains some printing models, and you can choose for printing;
please log in www.iu3dp.com, to choose the downloading of more models.
3. If you need the support of medium software, please contact with the sales person, and we will provide
you with related services.
4. Due to the quick updating on product versions, this manual may not reflect all the characteristics of the
product, and please log in www.iu3dp.com to consult to the latest data.
09 10