Beruflich Dokumente
Kultur Dokumente
Training Files:
Download the training files using the button below, if you have not done so already.
Download
Procedure Setup:
1. To avoid naming conflicts, it is recommended you save your work, click File > Close until no models
display, then click File > Manage Session > Erase Not Displayed.
2. Click File > Manage Session > Set Working Directory and navigate to the
PTCU\CreoParametric2\Cabling\Locations_Properties folder and click OK
2. Select Appearances Manager from the Appearance Gallery types drop-down list.
5. Click Override all in the Warning message window, then click Close.
9. In the ribbon, click Modify Harness from the Harness group and click HARNESS_1 > Done
from the menu manager.
10. Right-click to query and select the first location point below the 9-pin connector.
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 25-10-2017
Editing Location Properties Page 2 of 5
Figure 1
Figure 2
Figure 3
18. Notice the rotation occurred around the first wire at the location.
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 25-10-2017
Editing Location Properties Page 3 of 5
Figure 4
23. Notice these are the same options that were available in the location properties.
25. Press CTRL and select the three center location points on the red wire.
Figure 5
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 25-10-2017
Editing Location Properties Page 4 of 5
Figure 6
Figure 7
33. The system does not allow the value, as it is too small for the current wire bundle.
36. Click Repaint from the In Graphics toolbar and notice that the wire bundle has untwisted.
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 25-10-2017
Editing Location Properties Page 5 of 5
Figure 8
42. In the model tree, click Settings and select Tree Filters.
43. In the Model Tree Items dialog box, select the Features check box from the Display types and
click OK.
47. Notice that the wire bundles regenerate with one less wire.
Figure 9
http://precisionlms.ecorp.cat.com/precisionlms/standard-content/coach_cp_6697620f-... 25-10-2017