ATTACHMENT 1
a6
Procedure for the Seal packing exchan
Dr Stem Drive for hydraulic decoking systems ana
a
FLOWSERVE
SS
Dismantling the seal casing / bushing
A
gd ‘Switch the machine OFF before starting repair and / or maintenance work and secure it
against being switched ON inadvertently!
1. Prepare the workplace.
2. Provide lifting gear (load capacity min. 250
kg).
Warning of a danger zone!
‘There is a danger of injury through rotating parts.
STEP AA
3. Secure the tool (1) 1HGKO02505 by the lifting
eye (2) to the lifting gear.
4, Loosen and remove the bolts (3) from the packing
giand (4).
5. Loosen and remove the bolts (7) from the
cylinder liner (6)
6 734 24
FLOWSERVE JAPANATTACHMENT 1
Cae Drill Stom Drive for hydraulic decoking systems 26
FLOWSERVE
—S
STEPA2
6. Secure the tool (1) to the packing gland (3) using
the bolts (5).
7. Reise the tool (1) with packing gland (3).
8 Secure the tool (1) to the cylinder liner (8) using
the botts (6).
FLOWSERVE JAPAN= rit Stem Drive for hydraulic decoking syste ATIBCHMENT
tem Drive for hydraulic decoking systems
FLOWSERVE 3/6
STEPAS
9. Carefully remove the packing gland (3) and
cylinder liner (6) together with the tool (1)
from the dril stem drive,
NOTE!
QE ake care rot to damage te oye
eth eye ner (6 who ptng it down,
6 3 a4
\ |
a
STEP AA
10. Remove the tool (1).
11, Carefully remove the cylinder liner (3) from the
packing gland (6).
412, Take care not to damage the running surface
of the cylinder liner (6) when doing so.
FLOWSERVE JAPAN