Beruflich Dokumente
Kultur Dokumente
Technical brochure
Features MCX06C yy 4 analog and 6 digital inputs yy RTC clock for managing weekly time programs
yy 2 analog and 6 digital outputs and data logging information
yy Insulated power supply 20/60 Vdc - 24 Vac yy Modbus RS485 serial interface
yy Easy upload of application software through yy Display LED with 2 groups of digits for
CANbus connection for programming key showing the desired information in one screen
yy Remote access to data through CANbus yy Dimensions 33x75mm
connection for additional display (LCD yy Panel mounting
available) and keyboard
485
www.danfoss.com/mcx
MCX06C
General features
FEATURES DESCRIPTION
20/60 Vdc and 24 Vac ±15% 50/60 Hz. Maximum power consumption: 6 W, 9 VA
Power supply
Insulation between power supply and the extra-low voltage: functional
Self extinguishing V0 according to IEC 60695-11-10 and glowing/hot wire test at
Plastic housing
960 °C according to IEC 60695-2-12
125 °C according to IEC 60730-1. Leakage current: ≥ 250 V according to
Ball test
IEC 60112
Operating conditions CE: -20T60 / UL: 0T55, 90% RH non-condensing
Storage conditions -30T80, 90% RH non-condensing
Integration In Class I and/or II appliances
Index of protection IP64 ~ NEMA3R only on the front cover
Period of electric stress
Long
across insulating parts
Resistance to heat and fire Category D
Immunity against voltage
Category I
surges
Software class and
Class A
structure
CE compliance:
This product is designed to comply with the following EU standards:
-- Low voltage guideline: 73/23/EEC
-- Electromagnetic compatibility EMC: 89/336/EEC and with the following norms:
• EN61000-6-1, EN61000-6-3
Approvals (immunity for residential, commercial and light-industrial environments)
• EN61000-6-2, EN61000-6-4
(immunity and emission standard for industrial environments)
• EN60730 (Automatic electrical controls for household and similar use)
UL approval:
-- UL file E31024
Inputs/outputs
Connection diagram
Analog
output
local network
NTC
0/5 V
NTC
Pt1000
(80 mA max)
UNIVERSAL
ON/OFF
to the AI
supply
board
Power
TTL Serial Comm.
DI 1
DI 3
DI 5
0/1 V
CANbus
0/5 V (if expected)
0/10 V
PWM
PPM
0/10 V
0/20 mA
4/20 mA *
CAN
CAN485
TX/D+
INPUT/OUTPUT
COM
COM
GND
GND
ID
VCC
DI 1
CAN
CAN
A0 1
AI 1
CANH
DI 3
CANH
CANL
AI 3
CANL
DIR
DI 5
5V+
RX/D-
R1 20
COM
12V+
COM
A0 2
AI 2
DI 4
AI 4
DI 2
DI 6
RS485 (Modbus)
(if expected)
PWM
PPM
0/5 V
NTC
NTC
Pt1000
UNIVERSAL
(50 mA max)
ON/OFF
to the AI
0/1 V
regulator
DI 2
DI 4
DI 6
speed
MCX06C
0/5 V
0/10 V
0/20 mA
4/20 mA
L N
N0 1
N0 2
N0 3
N0 4
N0 5
N0 6
DIGITAL OUTPUT
POWER SUPPLY
N1
L1
C1
C2
C3
C4
C5
C6
**
5A
5A
5A
5A
5A
5A
L L
24 Vac
N N
*NOTE: connection has to be made on the first and last local network units, make the connection as close as possible to the connector
**NOTE: C1, C2, C3, C4, C5, C6 internally connected between themselves
Connection
Input and 18 way Molex Microfit type (43025-1800) -- Molex: (43030-0001) section cable AWG20-24
output crimping contact type (0.52-0.20 mm²)
connector -- Molex: (43030-0004) section cable AWG26-30
(0.13-0.05 mm²)
-- Instrument for the Molex crimp
code 69008-0982 (20-24 AWG)
-- Instrument for the Molex crimp
code 69008-0983 (26-30 AWG)
CAN 4 way Molex Wire-to-board type (87369-0400) -- Molex: (50212-8000) section cable AWG24-30
connector crimping contact type (0.20-0.05 mm²)
-- Instrument for the Molex crimp
code 63811-1200
CAN/485 8 way Molex Wire-to-board type (87369-0800) -- Molex: (50212-8000) section cable AWG24-30
connector crimping contact type (0.20-0.05 mm²)
-- Instrument for the Molex crimp
code 63811-1200
Power supply 2 way Molex KK type (09-50-8021) -- Molex: (08-50-0105) section cable AWG18-24
connector crimping contact type (0.82-0.20 mm²)
-- Molex: (08-50-0107) section cable AWG22-26
(0.32-0.13 mm²)
-- Instrument for the Molex crimp
code 69008-0953
Digital output 12 way Molex Minifit Jr. type (39-01-2125) -- Molex: (39-00-0077) section cable AWG16
1-6 connector crimping contact type (1.30 mm²)
-- Molex: (39-00-0038) section cable AWG18-24
(0.82-0.20 mm²)
-- Molex: (39-00-0046) section cable AWG22-28
(0.32-0.08 mm²)
-- Instrument for the Molex crimp
code 69008-0724
Dimensions
29
28
33
75 75 71
Drilling template
84 13 minimal thickness of panel 0.8 mm
User interface
LED Display LED display with two groups of digits and 18 icons
display
Ordering
Accessories