Beruflich Dokumente
Kultur Dokumente
1
Ctrl + E or ctrl+ shift+ E :-- merge layers.
Ctrl+ enter :-- for selection
Ctrl+ alt+ D :-- for feather
D :-- to apply black & white
color to foreground &background
X :-- swap to foreground to
background
Shift + alt+ click :-- to increase the object equal
size
V :-- for move tool
Tab key :-- to hide all tool boxes
Ctrl+ { :--to get back object
Ctrl+} :-- to get front object for full
screen mode (3 times F)
Ctrl+Alt+ Z :-- for undo (10 times)
New Document:--
First press ctrl + N for new document
Or
Go to file menu
Click on new
Set the page size:-- A4 or 800 * 600
Next set the width:-- 800 pixels
Set the height:-- 600pixels
Next set resolution:-- 72
Set the color mode:-- RGB
Set the background contents:-- white
Click on ok.
2
Duplicate an image :--
You can duplicate an entire image (including all
layers, layer masks, and channels) into available
memory without saving to disk.
procedure:--
3
Next create any object in each layer
To merge press ctrl+ E for single layer
Note:--
One layer should be for one object only
We can hide the layer by pressing eye button in
layer palette.
Feather :--( alt+ ctrl+ D)
This option is used to delete the edge part of the
image pixels.
Procedure:--
First create a new document
Open any image & make into duplicate
Select the any lasso tool
Select the image
Go to select menu
Click on feather option
Set the radius: -- 1.8 pixel
Click on ok
Click on ctrl + C copy
Select the document
Click on paste.
Note:--Select menu modify feather tool
Free Transformation :--( ctrl + T)
This option is used to increase the size of the
object and also flip the object in different angle,
rotate, skew, & distort etc.
Edit menufree Transform
Procedure:--
4
First create a new document
Open any image & drag to your document
Or
Create any object with layer
Next go to edit menu
Click on free transform option
Next click & drag on the pointer
Right click & select any option.
To delete the option
Press enter key.
Gradient tools:--
This tool is used to apply the multi – colors to
your objects & document. In this tool we have 5
types .they are:--
1. Linear gradient
2. Radial gradient
3. Conical gradient
4. Reflected gradient
5. Diamond gradient
To select any this option
Go to option bar
Select any one
Next create & drag on it.
To change any color
Click on the gradient option
It display the gradient editor box
Next change the color & click on new option.
5
TOOLS TABLES
6
Main tools box:--
Move tool :--( V)
This tool is used to move the created object &
image. It is also used to select the images & objects.
This tool is also called as pointer tool & pick tool.
Marquee tools:--
This tool is used to create the object in your
document. We have four types of marquee tool. They
are:--
Rectangle marquee tool (M)
Elliptical Marquee tool (shift+ M)
Single row marquee tool
Single column marquee tool
For this tool we have the shapping option in
optional bar. They are:--
New selection
Add to selection
Subtract from selection
Intersect with selection
To select this option go to optional bar.
Procedure:--
First create the new document
Next create the one layer
Next select any marquee tool
Next click & drag on the document
7
To set any options go to property bar
Next apply the color to object.
8
Select the image
Next apply the feather: -- 1.8 pixels
Press ctrl + C copy
Next select the new document
Press ctrl + v for paste.
Crop tool:--
This tool is for mostly a stamp size photo purpose.
To cut the images into your document. To select the
particular part from your images.
Procedure:--
9
First create a new document
Open any image
Make it into duplicate
Select the crop tool
Click & drag on the image
Next press enter key
Eraser tool:--
This option is used to erase the created object in
your document. We have three type of eraser tool.
They are:--
Eraser tool (E)
Background eraser tool (shift +E)
Magic eraser tool (shift+ E)
Eraser tool:--
This option is used to eraser the object of created
in your document.
Background eraser tool:--
This option is used to eraser the background of
your document. It displays the transparent document.
Magic eraser tool:--
This tool is just the magic wand tool. This tool is
also used to erase the single color background of your
images of any document.
Procedure:--
First create a new document
Open any single color background image
Select the magic eraser tool
10
Click on single color image.
Text tool:--
In this application we have four types of text
tool. They are:--
Horizontal Text tool (T)
Vertical text tool (shift+ T)
Horizontal mask text tool (shift+ T)
Vertical mask text tool (shift +T)
11
Note:--
To remove the text selection press CTRL+ Enter
Boarder text:--
It is used to type only the outline text. To type
the boarder texts select the masking text tools.
Procedure:--
First create a new document
Next create a new layer
Select any masking text tool
Click on the document
Next type the text
Go to select menu
Click on modify
Click on boarder
Set the width: - 3 points
Click on ok
Set any color to text.
Brush tools:--
In this option we can apply painting to your
document. They are three types of brush tool. They
are:--
Brush tool (B)
Pencil brush tool (shift + B)
Color replacement tool (shift + B)
Brush tool:--
This tool is used to paint the image in your
document. To select any styles
12
Go to optional bar
To apply any color to brush
Select the foreground color & background
color
Creation of brushes:--
First create a new document
Next create any shape or any images
Go to edit menu
Click on define brush option
Click on ok
Select the brush tool
13
Go to option bar
Select your created brush
Click & drag on the document.
Next apply the color
Pen tool:--
This tool is used to select the image without any
background. It is same like the lasso tools. We have
two types of pen tools. They are:--
1. Pen tool(P)
2. Free from pen tool (shift+ P)
1. Pen tool:--
It is used to select the image with any
background. To convert into selection modepress
ctrl+ enter key. To delete any selection press
backspace key.
Procedure:--
First create a new document.
Open any image
Make into duplicate
Select the pen tool
Select the image
To delete selection press backspace key.
Next press ctrl+ enter key.
Next apply the feather :-- 1.8 pixels
Click on ctrl + c for copy
Select the document
Ctrl + V for paste
14
Note:--
1. F :-- for gray color full screen
2. F :-- for black color full screen
3. Tab key : -- to hide all tool boxes
4. To get normalclick tab key & press F key
5. To delete extra selection pointer press ALT key
in mid pointer.
6. to increase the brush size press }
7. To decrease the brush size press {
15
Next copy the image & paste it on new
document
Next apply background color or any wallpaper.
16
Custom shape tool:--
In this we can create a different shape in your
document. To select different shape go to
optional barnext click & drag on the document
To create any custom shape
Create with pen tools only
Procedure for shape creation:--
First create a new document
Select the pen tool
Next create any shape
Go to edit menu
Click on define custom shape option
Click on ok.
Next select the custom tool
Select your created shape in optional bar
Click & drag on it
Next apply the color.
Vector mask:--
This option is used to set the images into custom
different shape.
Layer menuvector mask
Procedure:--
First create a new document
Open any image
Drag to your document
Select the custom shape
next select the shape in optional bar
Go to layer menu
17
Click on vector mask
Click on reveal all
Click & drag on it.
Layer mask:--
This option is used to set the two images as a
background.
Procedure:--
First create a new document
Open any two images
Drag the two image into your document.
Select the gradient tool
Go to layer menu
Click on layer mask
Click on layer
Click on reveal all
Click & drag on the document.
18
This tool is also used to delete the patches from
images by holding the alt key.
Procedure:--
First open any image
Next click on clean area
By holding the alt key
Next click on patch area.
Patch tool:--
This tool is used to delete the patches by
selecting the patches & dragging into clean area.
PHOTO EDITING:--
In this application we can convert the images
into:-
1. Black & white image to color images
2. Color images to black & white images
3. Removing patches
19
Select the location c: drive
Click on program files
Click on adobe
Click on Photoshop cs2
Click on samples
Click on old image
Click on open
Next make the image into duplicate
Next select image
Go to image menu
Click on mode
Click on RGB mode
Next go to image menu
Click on adjustment
Click on variations
Select any color
Click on ok.
Color to black & white image:--
First open any image
Make in to duplicate
Go to image menu
Click on mode
Click on gray scale option
Removing patches:--
First open the image
By pressing ctrl + O
Select the location c: drive
20
Click on program files
Click on adobe
Click on Photoshop cs2
Click on samples
Click on old image
Click on open
Next make the image into duplicate
Next select the patch tools any (ex:-- patch
tool)
Next select the patch
Next click & drag on the clean area
Like this remove all patches
21
This tool is used to expand the objects. It is also
apply in Corel Draw application.
Procedure:--
First create any object
Next select the tool (blur or smudge tool)
Click & drag on the document.
Note:--
Sharpen tool mostly used on the jewellary. It is
used to get the clarity in your images.
Dodge tool:--(o)
22
Next select the dodge tool & delete the dark
color
Next select the burn tool & apply dark color to
hairs
Next select the sponge tool & apply the white
color.
23
2. pre – define pattern tool:--
In this option we can get already created pattern
in your document.
To select this option
Go to optional bar
Select any pattern
Procedure:--
First create a new document
Next create a new layer
Select the pattern stamp tool
Go to optional bar
Select the pattern
Click & drag on the document
To get number of patterns
Click on pattern overlay option in layer palette
Set the size: 10
Click on ok.
Notes tool:--
This tool is used to write the notes of your
design. It displays number of books. To change any
color & size of text. Go to property bar.
Eyedropper tool:--
This tool is used to select the colors from the
images & apply the selected color to the objects &
back ground.
24
Color sampler tool:--
It is used to display the sampler pointer in the images.
Measure tool:--
It displays the measurement of the created
objects in property bar.
Zoom:-- (Z)
It is used to increase the size of the document or
image.
To get normal window.
Press ctrl + 0(Zero)
25
Click & drag on the image
Next to remove & to get normal
Select the history brush tool.
26
Quick Mask Mode :--( Q)
This option is used select the images with brush
tool. It will select just like the pen tools.
Procedure:--
First create a new document.
Next open any image
Make it into duplicate
Next the select the image with marquee tool.
Next press Q for edit quick mask mode
Next select the brush tool
Next select the remaining part image
Next press Q to selection mode
Next apply the feather option
Next press ctrl + C for copy
Next press ctrl + V for paste.
EFFECTS:--
Text rays:--
First create a new document
Next set the background color :-- black
Next select the text & type the text
Apply the text color: -- white
Next press ctrl +A for select all
Next with move tool
Go to optional bar
Click on the vertical center & horizontal
center.
27
Next go to filter menu
Click on distort
Click on polar coordinate option
Click on polar to rectangle
Next click on ok.
Go to image menu
Click on rotate canvas
Click on 900cw(Clock Wise)
Go to filter menu
Click on stylize option
Click on wind & set the from the right
Next For more wind
Press ctrl + F for wind
Next go to filter menu
Click on stylize option
Click on wind & set the from the left option
Click on ok
Next press ctrl + F for more wind
Go to image menu
Click on rotate canvas
Click on 900ccw(Counter Clock Wise)
Go to filter menu
Click on distort
Click on polar coordinates
Click on rectangle to polar
Click on ok.
Go to layer palette
Click on new fill & adjustment layer
28
Click on hue/ saturations
Click on colorize option
Set the colors
Click on ok
Sun rays:--
First create the new document
Next set the background color black
Create a new layer
Select the circle tool
Click & drag on the document
Next apply the white color
Next press ctrl + A select all
Next with move tool
Go to property bar
Click on vertical center & horizontal center
Next go to filter menu
Click on distort
Click on polar coordinates
Click on polar to rectangle
Go to image menu
Click on rotate canvas
Click on 900cw
Go to filter menu
Click on stylize
Click on wind
Click on from the right
Click on ok & press ctrl + F for more wind
29
Go to filter menu
Click on stylize
Click on wind
Click on from left
Click on ok press ctrl + F for more wind
Go to image menu
Click on rotate canvas
Click on 900ccw
Go to filter menu
Click on distort
Click on polar coordinates
Click on rectangle to polar option
Click on ok
Go to image menu mode
Click on grayscale
Click on flattenclick on discard
Click on image menu mode
Click on indexed color
Click on image menu mode
Click on color table option
Click on table: black body
Click on ok.
Fire effect:--
First create the new document
Set the background color:-- Black
Select the text tool
Type the text
30
Next press ctrl + A for select all
Next with move tool
Go to property bar
Click on vertical center & horizontal center
Go to image menu
Click on rotate
Click on900cw
Filter menu
Click on stylize
Click on windclick ok
Click on from the left click ok
Press ctrl + F for more wind
Go to image menu
Click on rotate option
Click on 900ccw
Select the rays with rectangle tool
Go to filter menu
Click on distort
Click on zig zag option.
Click on ctrl +F
Click on blending option in layer palette
Click on gradient overlay
Select the color:-- orange yellow orange
Click on ok.
Press ctrl + J for duplicate
Next press ctrl + T for free transform
Next right click select flip vertical
Press enter key.
31
Select the duplicate layer
Go to layer palette
Click ok opacity option
Set the opacity:-- 50 %
Press enter key
Text Mask or clipping masking:-- (layer menu)
This option is used to insert the images into your
text.
Layer menuclip masking
Or
Press ctrl + alt+ G for clipping
Procedure:--
First create a new document
Select the text tool & type the text
Open any image
Drag to your document
Set the image size into your text size.
Hold the alt key
Next click between two layers
Or press ctrl + alt + G for masking
Transparent text:--
This is also same like the text mask. In this
option we can set the text into the background of the
image.
Procedure:--
First create a new document
Open any image
32
Drag to your document
Next create a duplicate image
Next type the text between two images
Select the text layer
Click between two layers
Next hold the alt key
Next click between two layers
It display arrow mark in layer
Next select the text layer
Go to bevel & emboss in blending option
Click on ok.
Golden effect:--
This option is used to convert the text into
golden color.
Procedure:--
First create the new document
Next apply the background color to black
Next select the text tool
Next type the text in yellow color
Next click on blending option in layer
palette
C lick on bevel & emboss option
Set the technique:-- chisel hard
Click on highlighting mode:-- Normal
Click on shadow mode:-- normal
Click on set the colors:-- brown
Click on ok.
Sky effect:--
33
First create a new document
Next set the background color:-- black
Next double click on background layer
Click on normal:-- dissolve (in layer palette)
Set the opacity:-- 99% or 98 %
Next create one layer
Select the elliptical tool
Create one circle
Apply the color as:-- white & merge the
layer
Next go to filter menu
Click on render
Click on lens flare
Set any option click on ok.
Matrix
Take a doc in 400x400px.
Press D,
Go to Filter >Texture>Grain,
100
100
Verticalclick on ok
Filter>Artistic> Neon glow.
4
25
In the color box give light green
colorok
Filter>Sharpen>Sharpen moreok
34
INVITATION:--
First create a new document
Next set the page size:-- 800 * 600
Set the width:-- 800
Set the height:-- 400
Set the resolution:--72
Set the color mode:--RGB
Click on ok
Open any image
Click & drag on the document
Next go to filter menu
Click on blur optionmotion blur999
distance
Click on ok.
Create the layer
Select the rectangle marquee tool
Click & drag on the document
Right click on the objectstroke
Apply the color &set the width
Click ok
Next select the rectangle tool
Click & drag on the boarder &
Press delete button & type text
Next select the custom shape tool
Select the frames in optional bar
Next create a layer
Click & drag on the background
35
Press ctrl + enter for selection
Next apply the color to frames
Next create one more duplicate frame
By pressing ctrl + J
Next with move tool move the object
Next select the frame layer
Select the magic wand tool
Click on frames inside
Next open any image
Select the image with rectangle or any shape
Next press ctrl + c for copy
Next press ctrl +shift+ V for paste
Like this insert one more image into 2frames
Next type the text.
Artistic effect:--
Using this option we can convert the images into
glass type image, painting image, plastic wrap images
etc.
Procedure:--
First create a new document
Open any image
Make it into duplicate
Go to filter menu
Click on artistic effect
Click on any effect
Click on ok.
36
Setting as desktop background:--
First create any background
Ex:--image
Go to file menu
Click on save for web option
Click on save
Select the location:-- desktop
File name:-- xyz
Click on ok
Close the Photoshop
Come back to desktop
Right click on it
Properties
Click on desktop
Click on browse
Select the location desktop
Select your created file
Click on apply
Click on ok.
CLOUD EFFECTS:--
First create a new document
Set the foreground color blue & background color
white
Go to filter menu
Click on render
Click on clouds
For more clouds press ctrl + F
37
Rock effects:--
First create a new document
Set the foreground color blue & background color
white
Go to filter menu
Click on render
Click on clouds
For more clouds press ctrl + F
Go to filter menu
Click on render
Click on lighting effect
Click on light type:-- omni
Set the intensive color:-- orange
Set the properties color:-- orange
Set the texture channel:-- green
Set the mountainous:--100%
Click on ok.
38
Click on new set buttonclick ok
Click on file menu
Click on automate
Click on picture package
Click on layout
Select any layout:-- 5*4
Click on ok.
Action on image:--
Open any image
Window menuaction option
Click on new action button
Apply any action name
Set any function key f1 to f12 (any one)
Click on record
Next press ctrl+U
Select the colorok
Next click on stop action option in action pallete
Open any other image
Press function key which was apply
It apply the effect automatically
39
Go to file menu
Click on automate
Click on web photo gallery
Select the style
Click on browse:-- select the image folder
Click on destination:-- click on empty folder
Click on ok.
Contact sheet II:--
Using this option we can insert all the images
into single contact sheet.
Procedure:--
First create a folder in desktop
Select the image & paste it on the folder
Open the Photoshop
Go to file menu
Click on automate
Click on contact sheet II
Click on browse button
Select the image folder
Click on ok
Animation:--
This option is used to create the animation to
your objects or to text.
Procedure:--Rainfalls
First create the new document.
Open any image drag to your document
40
Double click on background layer & apply the
black color.
next set the background layer to top on the image
layer
Go to filter menu
Next go to pixelated click on pointilize
Set the radius:-- 5
Click ok
Next go to filter menu
Click on blurmotion blur
Set the angle:--35
Set the distance:-- 18 pixels
Click on ok
Click on normal option in layer palette
Set the screen
Go to window menu
Click on animation
Click on duplicate frame
Click on second frame
Press ctrl + T for free transform
Increase the size
Next set the down means move to down side
Click on enter key
next set the timing
Click on play button
41
Select the text tool & type text
Next create a new layer & apply white color
Next set the opacity:--95 % for new layer
Next create a small circle upon the text on 1st letter
Press delete button
Right click on circle stroke & apply the color
Next set the opacity 100% in text layer
Next go to window menu
Click on animation
Create a duplicate frame in animation palette
Next move the circle to last of the text
Next click on tweens animation frame option
Next apply the frame:--9
Click on ok
Click on play animation button.
42
Click on liquify option
Select the option pucker tool
Click on the eye
Next click on ok
Go to window menu
Click on animation option
Click on hide layer button
Click on duplicate option in animation palette.
Next the show the layer button
Next click on play animation button in animation
palette.
Slice tools:--
In this option we can crop the image into number
copies. They are two type:--
1. Slice tool
2. Slice select tool
Slice tool is used to crop the images & slice
selected tool is used to adjust the select parts.
Procedure:--
First open any image
Next make it into duplicate
Next select the slice tool
Next click & drag on the images (to crop)
Next go to file menu
Click on save for web option
Click on save
Select the location desktop
43
Next give the file name ok
Next go to file menuopen
Next select the save location file
Next select all copies
Click on open
Next create the new document
Next copy the image & paste on the document
Like this copy & paste all the images into new
document.
Softcopy:--
It is used to remove the shining color to images and
display it into soft face.
Procedure:--
Open any image & duplicate ctrl+ J
Go to filter menublurclick on Gaussian blur
set 3.0pxok
Click on add layer mask option in layer palette
Select eraser tool
Next erase on the jewellery, dress etc.
Note:-- don’t eraser on the skin part
Drop Shadow:--
First select any side face image
Next paste into new document
Next create a duplicate image
Select the duplicate image layer
44
Next hold the ctrl key & click on duplicate image layer
It display the select & apply the black color to select
Next set the black image in side as drop shadow
by pressing ctrl +T for free transform
Note:-- adjust with free transform only (ctrl+ t)
Flower creation:--
create a new document
next create layer
next select the elliptical marquee tool
next draw it on the document
next apply any gradient color
next apply free transform by ctrl+ T
next go to optional bar
set the mid point in down of the object
next set the rotation any angle(ex:--300)
press 2 times enter key
next press ctrl+alt+shift+T for duplicates
CD creation:--
45
Next select the subtract from selection option in optional bar
Next click inside of the circle
Next open any image
Select all the image
Next select the created document
Next press ctrl+ shift+ V for paste
EXTRA EFFECTS:--
Vanishing point:--
First create a new document
Next open any 3d images 4 sides
(ex:-- go to e: /image reference/lighting /select any
room)
Next make it into duplicate
Next drag the image into your document
Next open any hero or scenarios
Select the image press ctrl + A
Next copy & paste into your document
Next hold the ctrl key
Next click on the layer for selection of picture
Next press ctrl + c for copy
Next press ctrl+ d for deselect
Next hide the picture layer
Next create a new layer
Go to filter menu
Click on vanishing point
Next select the tool create plane tool
46
Next select the 3d place area(square or rectangle
shape)
Note:--
Selection should be in blue color only
If the grid line comes in yellow or red then again
adjust it with tool up to blue color display
Next press ctrl + v for paste
Next select the image & drag into the blue color
selected place
Next to adjust whole image
Press ctrl + t for free transform
Next click on ok
Next go to layer pallet
Click on normal option button
Select the option soft light or as you required.
Procedure:--
First open any black or white background image
Select the image with pen tools
Create a new document
Next paste the image
Next zoom the image to edges part
Go to layer menu
47
Click on matting
Click on remove black & white pixels
It will delete the black & white pixels from
pasted image
Animation of birds:--
First create a new document
Next create new layer
Select the custom shape tool
Go to optional bar
Select the bird shape
Next click & drag on the document
Next press ctrl+ enter for selection
Next apply the white color
Next create a duplicate layer
Next hide the first layer
Next change the shape of copy layer
Next go to window menu
Click on animation
Next hide the first copy & click on duplicate frame
Next set the show button & click on duplicate
frame
Next select the copy layer
Next set the show button & click on duplicate
frame
Next play the animation
Drop Shadow:--
48
First select any side image
Next paste into new document
Next create a duplicate image
Select the duplicate image layer
Next hold the ctrl key & click on duplicate image layer
It display the select & apply the black color to select
Next set the black image in side as drop shadow
by pressing ctrl +T for free transform
Note:-- adjust with free transform only (ctrl+ t)
flower creation:--
create a new document
next create layer
next select the elliptical marquee tool
next draw it on the document
next apply any gradient color
next apply free transform by ctrl+ T
next go to optional bar
set the mid point in down of the object
next set the rotation any angle(ex:--300)
press 2 times enter key
next press ctrl+alt+shift+T for duplicates
49
CD creation:--
Next the new document size 120/120cm in page setup
Next elliptical marquee tool
Go optional bar set the style fixed size
Width:-- 120cm height:--120cm
Next click on your document
Next create any small circle inside
Next apply the color to circle
50
Press{Ctrl+Shift+E}.
Then Ctrl+U to color it.
Then go to ImageAdjustmentsBrightness /
contrast,(lower the bright & increase the contrast.).
51
AEROPLAIN TURBAIN EFFECT (focus)
Take a new document with 400x400px
Then go to FillterRenderDifferent clouds
And repeat for Press ctrl +f
20-30 times.
Duplicate the 2 layers.
Select first duplicate layer go to
FiltersDistortwave.
Don’t change any no. but click randomize button
and enter.
Repeat step for 5 times. on second layer & set
mode in lighten.
Go to Layer>merge visible.
Press Ctrl+U to Open Hue/saturation.
Hue=81
Saturation=75
Lightness=-12.
Duplicate layer and go to Filter>distort>Twirl &
set in 999%
Put it in lighten mode.
Press Ctrl+Shift+E to merge visible.
Duplicate the layer and go to
Filter>Pixilated>color halftone.
Rau=8
Cha=90
'' =90
'' =90
52
'' =90.
Apply Filter >Distort>Polar
coordinates>Rectangular to polar.
Go to filter>Blur>Radial blur---Amount = 100,
Method=Zoom, Quality=Best.
Set the layers Ctrl+Shift+ E for merge layers
Set layer mode to lighten.
Next press ctrl + U for hue /saturation
Set any color (ex:-red)
53
Press shift+ backspace key
Select your created patter
Click ok
Shortcut keys:-Photoshop
-------------------------------
Ctrl + N for new file
Ctrl + Shift + N for new layer
Ctrl + E for merge layers
Ctrl + J Duplicate layer
Ctrl + B for Color balance
Ctrl + T for Free Transform
Press Tab + F + F to display for screen
Press Tab + F to get back Photoshop
Ctrl + D for deselect ion
Ctrl + O for Open
Ctrl + + for Zoom in
Ctrl + - for Zoom out
Ctrl + zero for default size
Alt + Delete Fill the background color Or Ctrl +
--backspace ()
Ctrl + F for more effects
Ctrl + Z for Undo Previous action
Ctrl + A for select all
Ctrl + C for Copy
Ctrl + R for Ruler
Ctrl + I for invert (negative)
Ctrl + Alt + D for Feather
54
Ctrl + Shift + > to increase font size
Ctrl + Shift + < to decrease font size
Press Close} to increase Eraser size
Press Open {to decrease Eraser size
Ctrl + Enter button for selection
Space bar for hand movement
Ctrl + Alt + Z for double undo
Ctrl + w for close sub window
Alt + F4 to close main window
Ctrl + Shift + mouse left button to drag image or
object.
To select the particular part exactly press left arrow+
‘V’ key
Matting:--(layer menu)
It is used to remove the white & black pixels in
edge for paste image.
Procedure:--
First open any black or white background image
Select the image with pen tools
Create a new document
Next paste the image
Next zoom the image to edges part
Go to layer menu
Click on matting
Click on remove black & white pixels
It will delete the black & white pixels from
pasted image
55
THUNDER
Take a new document in 500x500px with 100res in RGB.
Take a new layer {SHift+Ctrl+Alt+N} & fill with black
color .
Go to Filter>Render>Clouds
Again go to Filters>Render>Difference clouds.
Then Go to Images>Adjustments>levels {Ctrl+I}.
Move middle curer to right side until you satisfy.
Now you color the lines with Hue\saturation{Ctrl+U}.
Hue=
Saturation=
Lightness=
*calories
56