Beruflich Dokumente
Kultur Dokumente
Type
Catalog No.
4.78 in 4.78 in
4.84 in 4.84 in
Luminaire Data
Weight 7 lbs [3.2 kg] 9.55 in
EPA 0.39 ft2 [243 mm]
9.55 in
[243 mm]
Notes:
Accessories*
1 Factory set drive current, field adjustable standard. Refer to Performance Data Table. Consult factory if
wattage limits require a special drive current. HSS 7
House Side Shield, Snap-On*
2 350mA and 580mA drive current available with GCJ1 only. CSS8 Cul-De-Sac Side Shield, Snap-On*
3 1A drive current available with GCJ2 only. SPB9 Square Pole Horizontal Arm Bracket
4 Non-field adjustable, fixed drive current. Specify required drive current. Not available with PCR5-CR or RPB9 Round Pole Horizontal Arm Bracket
PCR7-CR options. PTB9 Pole Top Tenon Horizontal
5 Field adjustable current selector included. Wireless node dimming is disabled, field changeable Arm Bracket
connectors included to enable dimming with PCR5/7. WB9 Wall Horizontal Arm Bracket
6 Control-ready wiring at factory for wireless node dimming. Default maximum drive current (700mA or BSK Bird Deterrent Spider Kit
1A) must be specified. PC Twist Lock Photocontrol
7 Flush mounted house side shield. Shield cuts light off at 1/2 mounting height behind luminaire. LLPC Long-Life Twist Lock Photocontrol
SC Twist Lock Shorting Cap
8 Flush mounted cul-de-sac shield. Shield cuts light off at 1/2 mounting height behind luminaire and 1-1/2
mounting height on either side of luminaire. *Accessories are ordered separately and not to be in-
9 Specify Color (GY, DB, BK) cluded in the catalog number. For factory installed HSS,
CSS specify as option in luminaire catalog number.
© 2016 Leotek Electronics USA. GCJ_072916. Specifications subject to change without notice.
GreenCobra™ Jr. LED Street Light
GCJ
Luminaire Specifications
Housing Optical Systems Finish
Die cast aluminum housing with universal two-bolt Micro-lens optical systems produce IESNA Type 2 or Housing receives a durable, fade-resistant polyester
slip fitter mounts to 1-1/4” to 2” (1-5/8” to 2-3/8” Type 3 distributions and are fully sealed to maintain powder coat finish. Finish tested to withstand 3000
O.D.) diameter mast arm. One-piece aluminum an IP66 rating. Luminaire produces 0% total lumens hours in salt spray exposure per ASTM B117. Finish
housing provides passive heat-sinking of the LEDs above 90⁰ (BUG Rating, U=0). Optional house side tested 500 hours in UV exposure per ASTM G154
and has upper surfaces that shed precipitation. shield cuts light off at 1/2 mounting height behind and meets ASTM D523 gloss retention.
Four-bolt mounting bracket is available. Mounting luminaire. Cul-de-sac shield provides back and side
provisions meet 3G vibration per ANSI C136.31- light control for end of cul-de-sac applications. Both Listings/Ratings/Labels
2001 Normal Application, Bridge & Overpass. Luminaires are UL listed for use in wet locations
shields are field installable without tools.
Mounting has leveling adjustment from ± 5° in in the United States and Canada. DesignLights
2.5° steps. Electrical components are accessed Electrical Consortium™ qualified 120-277V product.2
without tools via a high-strength, non-conductive Rated life of electrical components is 100,000 hours. International Dark Sky Association listed. Luminaire
polycarbonate door with quick-release latches. Uses isolated power supply that is 1-10V dimmable. is qualified to operate at ambient temperatures of
Polycarbonate material meets UL 746C for outdoor Power supply is wired with quick-disconnect -40°C to 40°C. Assembled in the U.S.A.
usage. Available rubber wildlife guard (RWG option) terminals. LED drive current can be changed in the
field to adjust light output for local conditions (not Photometry
conforms to mast arm with no gaps. Luminaires photometrics are tested by certified
available with PCR5-CR or PCR7-CR options). Power
Light Emitting Diodes supply features a minimum power factor of .90 independent testing laboratories in accordance with
Hi-flux/Hi-power white LEDs produce a minimum of and <20% Total Harmonic Distortion (THD). EMC IES LM-79 testing procedures. IES files for all CCTs
90% of initial intensity at 100,000 hours of life based meets or exceeds FCC CFR Part 15. Terminal block are available at leotek.com.
on IES TM-21. LEDs are tested in accordance with accommodates 6 to 14 gauge wire. Surge protection
Warranty
IES LM-80 testing procedures. LEDS have correlated complies with IEEE/ANSI C62.41 Category C High,
10-year limited warranty is standard on luminaire
color temperature of 3000K (WW), 4000K (NW), or 20kV/10kA.
and components.
5000K (CW) and 70 CRI minimum. LEDs are 100%
mercury and lead free. Controls
3-Wire photocontrol receptacle is standard.
ANSI C136.41 5-wire (PCR5) or 7-wire (PCR7)
photocontrol receptacles are available. All
photocontrol receptacles have tool-less rotatable
bases. Wireless control module is provided by
others.
© 2016 Leotek Electronics USA. GCJ_072916. Specifications subject to change without notice.