Beruflich Dokumente
Kultur Dokumente
ACCC®-Helsinki
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 155 sq. mm (305.9 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-081-E ACCC-TW 151 (297 kcmil) Helsinki Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Jaipur
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 160.3 sq. mm (316.3 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-146-E ACCC-TW 156 (307 kcmil) Jaipur Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Zadar
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 182.6 sq. mm (360.4 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-148-E ACCC-TW 177 (350 kcmil) Zadar Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Rovinj
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 194.9 sq. mm (384.6 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-147-E ACCC-TW 189 (374 kcmil) Rovinj Data Sheet www.ctcglobal.com Date Produced: 8/23/2018
DATA SHEET:
ACCC®-Copenhagen
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 226.4 sq. mm (446.7 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-083-E ACCC-TW 220 (434 kcmil) Copenhagen Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Reykjavik
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 229.7 sq. mm (453.2 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-087-E ACCC-TW 223 (440 kcmil) Reykjavik Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Monte Carlo
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 235.2 sq. mm (464.2 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-133-E ACCC-TW 229 (451 kcmil) Monte Carlo Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Glasgow
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 243.7 sq. mm (480.9 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-084-E ACCC-TW 237 (467 kcmil) Glasgow Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Gdansk
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 256.1 sq. mm (505.4 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-139-E ACCC-TW 249 (491 kcmil) Gdansk Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Casablanca
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 281.6 sq. mm (555.8 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-085-E ACCC-TW 274 (540 kcmil) Casablanca Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Oslo
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 323 sq. mm (637.5 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-094-E ACCC-TW 314 (619 kcmil) Oslo Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Lisbon
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 324.8 sq. mm (640.9 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-089-E ACCC-TW 316 (623 kcmil) Lisbon Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Amsterdam
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 378.2 sq. mm (746.4 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-091-E ACCC-TW 367 (725 kcmil) Amsterdam Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-25 mm
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 394.5 sq. mm (778.5 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-149-E ACCC-TW 383 (756 kcmil) 25 mm Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Leipzig
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 418.4 sq. mm (825.6 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-153-E ACCC-TW 406 (802 kcmil) Leipzig Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Brussels
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 433.8 sq. mm (856.1 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-093-E ACCC-TW 421 (832 kcmil) Brussels Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Stockholm 3L
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 467 sq. mm (921.7 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-134-E ACCC-TW 454 (895 kcmil) Stockholm 3L Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Stockholm 2L
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 476.9 sq. mm (941.2 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-095-E ACCC-TW 463 (914 kcmil) Stockholm 2L Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Warsaw
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 522.4 sq. mm (1031 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-096-E ACCC-TW 508 (1002 kcmil) Warsaw Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Dublin
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 539.9 sq. mm (1065.5 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-098-E ACCC-TW 525 (1035 kcmil) Dublin Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Kolkata
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 559.5 sq. mm (1104.1 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-135-E ACCC-TW 544 (1073 kcmil) Kolkata Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Hamburg
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 562.5 sq. mm (1110 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-099-E ACCC-TW 546 (1078 kcmil) Hamburg Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Milan
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 584.4 sq. mm (1153.3 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-100-E ACCC-TW 568 (1120 kcmil) Milan Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Rome
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 609.9 sq. mm (1203.7 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-101-E ACCC-TW 593 (1169 kcmil) Rome Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Vienna
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 647.7 sq. mm (1278.2 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-103-E ACCC-TW 629 (1242 kcmil) Vienna Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Budapest
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 688 sq. mm (1357.7 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-104-E ACCC-TW 668 (1319 kcmil) Budapest Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Mumbai
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 705.6 sq. mm (1392.4 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-136-E ACCC-TW 685 (1353 kcmil) Mumbai Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Prague
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 711 sq. mm (1403.2 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-105-E ACCC-TW 691 (1363 kcmil) Prague Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Munich
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 754.8 sq. mm (1489.5 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-106-E ACCC-TW 733 (1447 kcmil) Munich Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Warwick
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 771.5 sq. mm (1522.6 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-151-E ACCC-TW 750 (1479 kcmil) Warwick Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-London
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 781.3 sq. mm (1541.9 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-107-E ACCC-TW 759 (1498 kcmil) London Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Paris
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 837.6 sq. mm (1653 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-109-E ACCC-TW 814 (1606 kcmil) Paris Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Bordeaux
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 906.8 sq. mm (1789.6 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-138-E ACCC-TW 881 (1738 kcmil) Bordeaux Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Antwerp
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 972.7 sq. mm (1919.6 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-110-E ACCC-TW 945 (1865 kcmil) Antwerp Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Berlin
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 1036.1 sq. mm (2044.7 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-112-E ACCC-TW 1007 (1986 kcmil) Berlin Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Madrid
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 1042.9 sq. mm (2058.1 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-113-E ACCC-TW 1013 (1999 kcmil) Madrid Data Sheet www.ctcglobal.com Date Produced: 7/10/2015
DATA SHEET:
ACCC®-Athens
NOT RELEASED
*ACCC® conductor is produced with 1350 O-tempered aluminum. The nominal H-19 Aluminum equivaelnt area is 1451.2 sq. mm (2863.8 kcmil)
**ACCC® Conductors are required to exhibit lay lengths (ratios) that conform to ASTM B 857 or EN 50540.
1) Based on 96% of the annealed aluminum minimum tensile strength given in ASTM B 609 and EN 50540.
3) Conditions: 2 ft/s (0.61 m/s) wind, 0 ft (0 m) Elevation, 0.5 Emis. 0.5 absorp. 40°C Ambient temperature, 96 W/sq. ft (1033 W/sq. m) sun radiation
4) Maximum continuous operating temperature of ACCC® is 180°C and a maximum emergency temperature of 200°C (10,000 hours over the life of the conductor).
The information contained herein is offered in good faith. The ACCC® manufacturer’s specification may have some variation from the indicated values in this spec
sheet, with the weight and cross sectional area being no more than ±2% of the value indicated.
F-730-137-E ACCC-TW 1410 (2782 kcmil) Athens Data Sheet www.ctcglobal.com Date Produced: 7/10/2015