Beruflich Dokumente
Kultur Dokumente
Plus
Note: I cloned successfully all types of dongles with MultiKey Emulator. The most important step is that you must generate exact registry file. If you have any problem, plea
a comment.
For dongle Sentinel SuperPro/UltraPro, please download this additional tool https://drive.google.com/file/d/0Bwv-LAG1rD9ZU1JqNy1XOHEyTXM/view?usp=sharing
Start dumper
Run HASPHL2010.exe on machine that has latest version of Aladdin HASP HL dongle drivers installed and original parallel port or USB dongle connected
computer.
Service installation
HASP/Hardlock dumper and emulator designed as low level kernel mode driver and requires Administrators privileges to be installed.
When you start HASPHL2010.exe for a first time you'll see following window.
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 1/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
Press "INSTALL" button and if installation was successful Driver status window will be changed to "Status : driver is installed"
Starting service
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 2/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
To find your key it is necessary to start protected software.
HASP/HL Dongles window shows logged HASP dongle passwords. In this case, dongle password is 3C39:25A0
If your dongle is HASP or HASP HL then you need to use RTDumperGUI to generate registry file. Please carefully read readme.txt file before doing. For HASP (or HASP H
dongle you must input two parts of your dongle password into two contiguous textboxes. For example, my dongle password is 725F:583A so I must input 725F into the first
and 583A into the second textbox.
In my case, I got registry file RTDumperGUI/hasp_725F583A/725F583A___.reg. You should rename it to 725F583A.reg and then open it and replace
[HKEY_LOCAL_MACHINE\System\CurrentControlSet...] with
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\725F583A]
- Click start button , type uac, then press Enter. It will show User Account Control Settings, please decrease UAC level as follows:
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 3/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
- Install MultiKey32 or MultiKey64 (it depends on your OS, for example Windows 7 32 bit, Windows 7 64 bit). If your OS is 64 bit, then open folder MultiKey64 and do as fol
You wait for a while, you will see a popup asking you to install a unsigned driver. You must accept to install it anyway. And then, you wait for finishing driver installation succ
Find [C:\Windows\System32\drivers\multikey.sys] in your OS, it must exist in your OS. If it doesn’t exist, please reinstall MultiKey again.
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 4/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
Now you have to restart your PC, hold down F8 key on your keyboard, you will see the Advanced Boot Options screen, you select [Disable Driver Signature Enforcement] a
follows:
Press Enter to boot Windows. After Windows is booted it will install the unsigned driver automatically. You should verify the new driver as follows:
Press key combination Windows + R, type devmgmt.msc, press Enter. It should show
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 5/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
Now you can start your protected software and enjoy it. From now you will don't have to remember to bring/plug USB dongle.
Good luck :)
157 comments:
Anonymous said...
Thank you very much for writing these instructions. I followed them and it worked great.
I have a question, though. Once everything is installed and working, so I still need to keep the computer in Test mode? I followed your steps and used the Driver Signature Enforcem
Overrider to sign the multikey.sys file, so I assumed that at that point I could disable Test mode. But when I did that, the software asked for the HASP.
I am a little concerned about keeping the computer permanently in Test mode. Can you give me some advice?
August 19, 2014 at 9:40 AM
Anonymous said...
Hi,
I´m having some problem. My dongle is a HASP4 lpt. Do you know how can I emulate it?
September 1, 2014 at 1:52 PM
Anonymous said...
Hi, this method works for the hardkey e3 ellipse (www.elipse.com.br)?
September 10, 2014 at 5:44 PM
Anonymous said...
Any idea how to make this work with HASP SRM? Specifically trying to make e-Prime work (pstnet.com). We have lost 2-3 of these dongles @$1000 each :/
September 12, 2014 at 10:48 PM
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 6/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
Anonymous said...
Son Nguyen, today you are my Son Goku. Thank you for saving my world.
October 8, 2014 at 2:22 AM
mr2face said...
thank you so much. you're a lifesaver. saved me $400.
October 9, 2014 at 1:00 AM
Anonymous said...
Thanks for your post, works perfect with HASP HL dongle !
October 11, 2014 at 10:48 AM
Anonymous said...
Thank you fot the instruction, but how can I replace
[HKEY_LOCAL_MACHINE\System\CurrentControlSet...]
with
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\725F583A]
October 14, 2014 at 3:41 AM
Anonymous said...
Thank you very much for posting this info. It has helped me tremendously in multikey running properly.
October 18, 2014 at 8:26 AM
Kriss said...
Hi Son, thanks for that.
I'm blocked in the first part with the dumper, with a problem with windows uac..i tried the driver signature enforcement override but nothing, the problem still the same.
Any ideas ?
Thanks
October 20, 2014 at 1:31 PM
For HASP HL, maybe I already got the same your problem and I fixed by changing "Type"=dword:000000EA to "Type"=dword:0000004A. In addition to this, I cannot remember
anymore. If it is possible please send me your application and registry file I will try to help you.
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 7/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
October 24, 2014 at 7:29 AM
Anonymous said...
I have an Aladin LPT HARDLOCK key. Windows 7 will not see it so I had to create the registry file in window xp and move it to windows 7. It says the key is installed and running in
registry and program but the program is not working properly. Here is the reg file output.
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\000029FD]
"Name"="Dump for 29FDh (10749) dongle"
"Copyright"="None"
"Created"="23.10.2014 16:32:37"
"DongleType"=dword:00000002
"ID"=dword:FFFFFFFF
"withMemory"=dword:00000001
"Seed1"=dword:00008E17
"Seed2"=dword:0000F243
"Seed3"=dword:000036B2
"HlkMemory"=hex:\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
October 24, 2014 at 9:40 AM
Anonymous said...
You can disregard the last comment. I figured it out. The program settings got changed somehow during the install of these files. Once I set up its network settings again it started p
the data and working fine.
As a note to others the reason I did this was because I had to upgrade my computer and windows 7 would not recognize the dongle or load it. You can create your registry key on a
machine and use it on windows 7.
October 24, 2014 at 11:07 AM
John said...
Hi I am having a problem.
When I get to the 'dumper' stage and load my protected software to capture the password, a license error pops up that says: "HASP SRM protection key is no longer available. Erro
code 7: HASP_HASP_NOT_FOUND."
Thank you
October 29, 2014 at 10:50 AM
percival said...
Hi there,
I am trying to install the Multikey.sys on windows 7, 32 bit of which works fine on my other computer but it would not go on my new computer which also have win7 32 bit. I am using
HSP Device Driver Version 5.22. Can you please help me as I would greatly appreciate your help.
October 29, 2014 at 11:53 AM
Anonymous said...
Would you have time to advice me, please. I followed your steps. I also changed
"Type"=dword:0000004A
All seemed to work as you said except when I check the very last step to see the safenet items in the usb list they do not show. If I try to run my software with dongle removed it trea
as if the dongle is not there.
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\56C93067]
"Name"="Dump for 56C93067h (1456025703) dongle"
"Copyright"="None"
"Created"="05.11.2014 19:34:10"
"DongleType"=dword:00000001
"SN"=dword:5C742078
"Type"=dword:0000004A
"Memory"=dword:00000001
"SecTable"=hex:B8,B8,B1,B1,D8,D8,D1,D1
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,4A,1F,01,0F,01,0D,01,0A,1E,15,00
"Data"=hex:\
83,1F,34,00,4B,00,52,00,44,00,52,00,52,00,4D,00,\
44,00,45,00,4B,00,45,00,52,00,4E,00,4C,00,43,00,\
44,00,4A,00,48,00,45,00,46,00,41,00,41,00,48,00,\
44,00,4C,00,4A,00,52,00,42,00,45,00,4B,00,43,00,\
44,00,4C,00,4C,00,51,00,51,00,50,00,41,00,52,00,\
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 8/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
50,00,45,00,41,00,50,00,52,00,4B,00,45,00,4D,00,\
42,00,4D,00,4E,00,45,00,52,00,51,00,00,00,00,00,\
57,42,50,54,01,00,00,00,10,00,00,00,00,00,28,B1
"ColumnMask"=dword:000000BB
"CryptInitVect"=dword:00000033
November 5, 2014 at 5:35 PM
Eric said...
Hi, does this method work even with a parallel port Sentinel SuperPro?
Anonymous said...
Hi, do you might have an idea what type the "SafeNet Sentinel Dual Hardware Key" would be?
The SSP2MK did export as "DongleType"=dword:00000003
but that's Sentinel Super Pro 7067 and not "SafeNet Sentinel Dual Hardware Key".
A hint I would appriciate.
Thanks
November 9, 2014 at 12:08 AM
mohan said...
dear sir
i am unable to download your google drive software
November 13, 2014 at 6:47 AM
spvoly said...
hi, may i know how to upgrade .dng version. it can't open using HASPHL2010.exe. thanks for reply.. please email to spvoly@gamil.com
November 14, 2014 at 12:50 AM
radu said...
hy. i am wondering if i can install the program without a hasp key, because i dont have the hasp key. can this pe possible? thank you!
November 17, 2014 at 8:22 AM
Stefan P said...
Hi,
My dongle is HASP HL and my computer is running Win7 64bit. After I run Multikey it installs a device called "Virtual USB MultiKey" under System Devices in Device Manager. It wo
not show any other devices under "USB controllers" tab. Please help.
November 21, 2014 at 8:03 AM
Anonymous said...
Hi,
My dongle is HASP HL and my computer is running Win7 64bit. After I run Multikey it installs a device called "Virtual USB MultiKey" under System Devices in Device Manager. It wo
not show any other devices under "USB controllers" tab. ints not installed that 2 files, pls help me
November 30, 2014 at 6:36 AM
Anonymous said...
HI,
SRY THAT'S MY MISTAKE ITS WORKING FINE ,THANK'S LOT. GOOD JOB
November 30, 2014 at 11:45 PM
silence said...
im having some issues, I am trying to emulate a safenet setinel superpro, I need to emulate on server 2012 r2 x64. In the past i always emulated with winxp 32 bit, using sentemul2
any suggestions?
Thanks for your time on this.
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 9/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
December 1, 2014 at 1:29 AM
AcaR said...
Hi Son,
your page was very useful for me because it cleared ambigous instructions in many documents on Internet.
However, for my HASP HL dongleRTDumperGUI didn't worked.
h5dmp.exe from https://www.techidiots.net/notes/emulate-hasp-hl-pro-1/emulate-hasp-hl-pro made much different .reg file compared to RTDumperGUI.
At least, this other worked.
my emmail id kalalpraful@gmail.com
December 1, 2014 at 6:25 AM
Niru said...
Hi ,
By the USB port dongle its working , i have HASP4 LPT1 port dongle , do you have any idea to use that like this USB dongle....
December 3, 2014 at 1:46 AM
Anonymous said...
è possibile emualare 2 dongle che hanno la stessa password, ma contenuto diverso??
December 9, 2014 at 6:14 AM
Anonymous said...
Hi,
I hope you can help me with this issue:
I already have installed the multikey, because i've been using the software with a simple SafeNet USB SuperPro/UltraPro since 2011, but its key have changed. With the new key i c
see in my system 3 devices: Safenet Inc. Hasp Key, Safenet Inc. Sentinel Hasp Key and Safenet Inc. Usb Key.
i have used this tool "Sentinel SRM/HASP/HL Dumper v.1.3 (public) build on (21:16:27 May 30 2013)" trying to dump that new key
and my results are (for Backup HASP SRM):
Saved Dump_EA_78927_0.dmp
CONTINUE....
December 9, 2014 at 10:31 AM
Anonymous said...
2) A file named "Dump_EA_78927_0.dmp" with this information:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Shaspbus\Dumps\00000000]
; Sentinel SRM/HASP/HL Dumper v.1.3 x64 (public)
; rceguru@gmail.com
"FatData1"=hex:\
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 10/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
BC,B4,29,D4,62,BC,35,4F,5D,39,87,EC,D1,A4,AA,E8,\
F7,79,BB,01,59,D6,8D,A2,6D,F3,7B,06,62,FB,EA,C5,\
53,B6,08,85,E7,32,B0,2E,BB,5E,A6,D9,2D,D1,B2,B9,\
69,03,BB,E7,9B,F9,F1,5B,2F,09,6A,11,38,18,DD,36,\
4C,AB,A4,CD,C5,1C,2E,C8,E9,5E,CC,96,49,13,E2,A6,\
EA,53,FB,FE,E4,40,D7,06,7E,24,67,F8,06,39,25,4B,\
FC,3C,61,63,89,07,80,6E,4D,AE,4D,3A,DA,75,2A,34,\
73,20,C4,97,67,76,FE,CB,7F,15,CF,EA,11,FB,98,0E
CONTINUE...
December 9, 2014 at 10:35 AM
Anonymous said...
"FatData2"=hex:\
EE,A1,A6,86,9C,5F,4C,5B,23,AD,12,79,7D,93,68,B8,\
FE,5B,54,AB,0F,F2,8D,1E,DC,EA,B8,82,6E,16,A5,53,\
9B,19,54,A0,0A,BD,13,68,CA,AF,8E,83,A9,87,0B,DC,\
B5,2D,D6,BE,7B,FE,5A,3D,64,4A,61,77,FC,2C,63,17,\
B4,50,B9,CF,FA,08,40,6A,D4,CF,98,26,E8,3E,67,CB,\
0B,58,50,E6,CC,82,4A,61,E9,CD,BD,DD,64,F6,0E,34,\
19,2A,01,38,75,CC,3F,B2,75,EF,64,80,1F,84,F7,5A,\
16,9A,A1,62,26,69,D8,B9,41,16,E2,EE,25,58,DC,42,\
5B,FC,FC,1D,73,5A,82,CC,D0,BC,4B,40,46,FE,C2,5D,\
A4,84,ED,FB,14,87,5F,4B,C6,CC,9D,82,93,1E,31,5F,\
F3,92,A4,85,59,F9,75,5E,AD,DA,F7,02,14,C2,69,24,\
E1,6A,28,CF,56,49,EA,13,D1,38,09,AD,B9,BA,47,D4,\
ED,D7,CB,17,37,D0,55,4F,83,3A,32,20,66,0A,81,62,\
93,B0,58,A9,7E,E5,9B,3B,E7,C0,45,6A,93,B5,56,EE,\
2C,64,FB,05,AC,34,45,82,94,BE,F3,A4,44,62,94,23,\
51,2E,FC,17,73,B4,F1,82,0A,BE,D3,0C,9C,A6,B1,A8,\
1F,08,7C,44,5D,16,C1,63,29,54,91,81,21,29,C1,32,\
25,1D,BF,64,7B,47,C0,05,A1,F3,B6,18,C7,8A,CF,39,\
E6,F6,3C,31,CF,92,A6,1B,13,50,75,9D,40,00,ED,CA,\
9F,AF,03,1D,C5,28,20,68,9C,D4,1D,19,0C,5B,2B,5E,\
8D,5B,05,CA,0C,62,EB,49,50,C5,B9,B7,BE,AD,5E,5B,\
DC,9F,8F,B4,04,1D,70,D8,5F,68,C0,7A,7A,D7,52,42,\
4C,82,82,64,7F,06,08,F3,93,0E,0A,99,5F,35,1F,01,\
69,51,AE,B5,BA,55,F9,EF,3A,A7,15,D6,26,3C,D3,AC,\
AA,68,E2,14,66,5C,CC,E3,A1,20,7C,1C,F0,31,25,E5,\
91,70,F4,04,24,6D,1D,4E,30,83,AA,16,D1,63,97,7B,\
F6,BC,DC,D7,A1,AA,41,8E,97,86,3C,53,69,5E,08,F0,\
E2,A0,3B,D3,EC,6B,8A,86,58,4E,3F,76,1D,9D,05,89,\
EE,39,C0,0B,1D,86,A2,F4,3E,B2,FF,2E,B0,FE,F3,EF,\
D4,EF,49,BE,30,94,06,6A,25,67,4C,EE,BF,EF,9A,39,\
0C,4B,4C,C2,61,50,EA,BA,23,3E,D4,77,89,8D,A6,E3,\
2D,9C,8E,9F,F5,B9,B7,C3,24,35,CC,5E,D6,B3,5B,F5,\
52,4A,6D,8D,3B,11,5A,0E,9C,E0,5D,37,14,68,E1,A7,\
AE,F2,B7,FE,93,62,99,24,AE,DA,D9,B0,65,FE,71,1A,\
E9,FE,03,2D,47,16,E2,47,3C,50,26,C4,4D,90,F3,B7,\
64,39,AF,27,33,52,8C,CF,97,CE,B5,5A,63,0E,17,4C,\
18,86,09,F1,3B,89,E7,EC,78,F5,07,C6,BE,35,CA,49,\
B5,B2,6F,3A,6A,A3,CB,00,46,03,6A,7B,0E,47,69,41,\
7C,2A,4D,34,62,A4,5D,2E,C5,04,63,0F,E8,7A,53,AE,
CONTINUE...
December 9, 2014 at 10:37 AM
Anonymous said...
DF,18,6A,EE,47,F2,24,A1,64,E6,29,5F,13,4F,85,EB,\
95,13,E6,1D,0F,DB,E5,80,CE,57,8E,3A,F2,2E,DC,95,\
31,FA,E0,35,E4,BD,9B,2E,F7,5F,31,6F,FF,81,63,D1,\
C7,71,F7,CF,54,3C,BB,2D,6C,C8,F0,32,FC,64,96,D9,\
CA,46,80,73,6A,DC,4B,1E,BA,6C,A5,A6,EF,40,49,7F,\
E8,B8,9A,CF,6B,DD,2F,B2,DC,6B,7B,72,DB,6F,49,D8,\
17,F1,0B,83,97,7E,37,14,12,2C,D6,4F,61,2F,21,E4,\
6B,3F,1F,00,A4,E4,B7,3F,CA,E2,25,5E,E6,49,3A,DB,\
40,7B,67,DC,80,22,9D,40,D1,2A,5A,3B,1A,0B,B9,56,\
57,A3,8B,B5,42,FF,6A,A4,0A,97,9A,FB,B5,59,09,25,\
BD,2E,B3,22,7D,4C,D3,F3,D0,DD,09,3B,F5,A1,B9,8D,\
9F,49,EA,98,FD,46,8D,D1,DF,1E,C8,D6,CD,65,FE,C0,\
66,8F,DA,F7,96,44,A0,CE,C8,88,FF,5B,B4,66,41,F8,\
00,46,51,49,03,76,09,09,BC,22,95,2B,23,DB,8D,14,\
C7,E5,12,0A,F1,A1,70,43,6F,60,C5,05,68,B0,EC,32,\
EB,A9,11,3B,D0,64,63,30,F0,F7,CD,4D,25,B7,DB,D3,\
BB,5B,0E,14,68,26,9F,8E,66,CD,82,9A,B1,36,18,B4,\
44,CF,EF,0D,B9,94,5A,05,98,93,67,46,95,98,E3,3F,\
92,04,78,C3,A0,29,0D,83,D5,D8,02,BC,F9,6B,8B,D5,\
51,4B,5B,10,91,62,C9,B2,0F,B2,46,E2,DB,47,33,38,\
CA,9B,C1,65,C8,54,92,D1,10,DC,91,BB,3D,B9,1C,D4,\
B5,22,C6,14,BD,08,FD,78,71,68,ED,4E,05,11,5E,E0,\
C4,E2,02,42,7A,68,82,0F,43,D8,1C,91,D6,CB,FF,86,\
08,CF,12,F6,53,83,4C,05,C3,E4,44,9B,D9,50,86,1D,\
85,2F,CC,C7,A4,B4,61,80,FC,55,FA,A0,5E,1B,D7,D3,\
9E,16,D3,0C,71,40,E6,C7,24,15,61,DC,F1,1D,F0,65,\
33,7D,D8,1C,06,F1,F5,B6,07,C8,42,28,A2,E0,51,34,\
B3,A0,73,D0,A7,E7,40,62,46,11,7E,2B,19,35,C4,23,\
DF,3A,29,1B,62,A0,B3,9A,CD,03,79,2E,E9,C9,1E,D1,\
93,30,80,8E,D3,F0,F3,78,AE,5C,EA,57,84,11,21,0F,\
5E,3E,4F,02,B4,E3,DD,B6,C2,47,DC,23,CD,FA,68,50,\
AA,35,60,47,10,F1,AB,9C,C3,9D,B8,14,4E,66,5F,A6,\
0E,F4,50,1E,9B,D6,B9,65,0A,79,CF,DA,08,1D,5D,2B,\
C0,FA,B5,E5,9F,AA,84,F2,A4,31,50,02,A9,BF,DC,83,\
2B,45,D6,02,CD,63,7E,BF,F5,0F,67,28,AD,E5,96,6A,\
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 11/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
32,CB,88,4F,4F,1F,09,51,D7,D4,11,20,20,C5,42,7F,\
D9,C6,B0,53,2E,A8,65,69,F8,6F,70,DB,8D,ED,DF,34,\
01,6E,CC,62,28,82,D0,68,CC,A7,F9,A1,E6,91,69,85,\
8E,0D,5B,DF,9F,C5,DE,0E,AD,9B,B9,D2,6B,0E,52,2C,\
31,41,B5,BB,78,95,CC,FC,2B,20,10,4F,2C,19,FB,21,\
E6,E8,B8,66,C3,B6,7C,1C,40,A6,C9,A9,D2,FF,94,39,\
CONTINUE...
December 9, 2014 at 10:39 AM
Anonymous said...
22,DB,A2,75,DE,13,39,69,99,81,14,DD,E5,0E,90,E5,\
83,5B,D3,98,06,4C,7A,D0,4B,FA,6A,E6,86,B6,04,26,\
69,32,DF,03,6C,62,00,14,41,13,8B,BE,2F,38,E1,59,\
B9,1D,44,6F,F6,94,7B,9C,1A,38,C1,36,61,22,C7,C1,\
34,B9,F9,A4,01,6C,D1,8B,37,D1,59,50,C1,54,34,07,\
BA,2F,71,5B,6B,8A,C5,63,98,59,8C,6B,F3,09,EF,36,\
FC,95,9E,02,07,B5,7D,CA,71,57,F8,79,40,82,FA,1C,\
B5,81,33,0A,81,51,BF,48,AA,A9,7F,E0,7E,3E,48,3D,\
E0,49,E7,88,31,82,06,9A,5E,3B,4F,37,C9,6A,D8,40,\
19,72,0B,C8,63,54,33,9E,2A,6C,43,B6,92,A2,E7,17,\
D1,E1,3A,17,B5,10,74,EC,93,AC,FB,DE,CB,3F,2B,23,\
81,77,8A,F1,BB,B7,65,DF,16,C6,18,0F,3B,44,5E,85,\
C2,CB,12,D3,D5,04,A3,8E,F8,21,87,83,D8,E2,A3,B0,\
AA,12,A7,0D,32,C4,DB,C4,B1,A0,A3,28,0B,7B,4A,09,\
00,A3,A1,FB,DE,48,EF,38,E6,85,B6,D6,86,A5,C1,73,\
27,A2,BB,32,2E,AC,E1,85,7B,AE,EC,94,0E,D6,F9,C2,\
65,CB,EF,11,27,CB,7D,79,AE,41,D7,7B,85,B9,E5,7E,\
1C,48,7C,2D,44,47,1A,ED,41,76,A2,06,36,A2,D2,06,\
35,32,4C,2C,BC,4D,31,C5,05,31,DB,C0,F5,E4,ED,9D,\
64,7C,24,DE,4F,24,9B,85,89,D8,69,2D,AE,77,BD,33,\
72,1B,04,E8,C2,AB,29,3F,51,EF,C6,E9,04,43,0D,37,\
CE,88,A6,E8,A1,C0,48,2B,7C,4A,EB,95,9C,3D,11,F4,\
F0,CD,2A,5E,D2,DA,02,3F,24,D7,D3,D5,EF,22,19,A3,\
4F,6F,78,4D,DB,69,85,CD,41,3D,E1,B1,27,5E,BD,D8,\
8A,42,A7,F6,38,74,C4,51,A5,81,7F,A7,C8,BA,59,AE,\
09,18,F0,07,19,EC,01,A7,DD,83,6F,AB,DB,58,5B,86,\
89,A7,AC,0C,7A,B2,08,09,44,57,4E,0A,07,2A,64,D8,\
E1,AE,19,EA,2F,39,70,6A,A7,D1,F9,99,83,E0,58,7F,\
F8,38,02,2A,26,0C,7F,DD,68,0C,99,4A,1B,A3,A1,9D,\
4B,81,1A,FF,4D,A8,0E,EB,14,F5,2A,0C,16,AD,E4,E2,\
D5,1E,61,40,C0,87,D1,C4,E2,69,5B,34,E1,64,4F,08,\
55,03,0E,D3,CD,35,3F,B9,78,EF,39,21,75,26,33,8C,\
5B,4A,79,D2,F6,9C,80,E2,1A,A3,EF,7F,40,47,48,49,\
72,05,75,16,0A,DC,43,F8,AC,DD,A1,3A,BF,D5,74,E4,\
E9,4B,A7,D6,6C,98,A3,9D,4B,0A,21,EF,02,8F,B7,0F,\
5D,FF,3C,74,B4,BD,E3,E3,61,9C,64,B2,12,32,2B,7C,\
2C,D0,98,00,AF,9F,A4,85,53,91,88,24,3A,DD,17,FA,\
DC,A6,99,B7,5C,A4,A9,7A,A7,70,5C,D3,6C,28,7F,B4,\
79,7C,74,26,47,D5,DA,CB,CA,45,B4,CD,1D,28,98,FE,\
D3,E6,CA,92,10,81,09,80,47,26,3F,9D,7F,72,F6,BF,\
3D,57,50,31,FA,B5,FF,46,74,75,BE,85,B0,EF,12,14,\
12,E3,B6,0A,A3,86,3D,BB,C6,C3,6F,2C,D3,63,32,9B,\
EE,21,21,84,51,2B,61,9A,24,0E,E9,83,B2,74,91,1E,\
55,DD,B8,C5,F0,AE,91,DD,E3,BC,23,DB,CE,60,5A,F3,\
37,22,96,56,FD,72,7D,95,00,E6,34,E1,ED,BB,73,CA,\
A1,52,A8,EF,31,5B,76,64,A9,ED,CE,39,C3,65,AA,48,\
67,08,BC,F5,C4,E9,5F,60,B3,7E,33,40,08,D4,A2,B7,\
7C,D6,22,E4,3B,A3,70,9D,7C,C4,8A,5E,9B,86,72,23
CONTINUE...
December 9, 2014 at 10:40 AM
Anonymous said...
"CAFF"=hex:\
37,56,89,15,35,1C,45,89,85,AF,62,BD,BD,1B,12,39,\
B3,18,1C,D2,C7,EF,7B,A8,44,5B,10,74,3D,7B,9F,97
"CDFF"=hex:\
BC,B4,29,D4,62,BC,35,4F,5D,39,87,EC,D1,A4,AA,E8
"CBFF"=hex:\
BC,B4,29,D4,62,BC,35,4F,5D,39,87,EC,D1,A4,AA,E8
"RW_Mem"=hex:\
BC,B4,29,D4,62,BC,35,4F,5D,39,87,EC,D1,A4,AA,E8,\
85,1F,F7,6D,92,0F,16,71,39,5C,FB,C0,01,16,12,46,\
34,E8,26,D7,52,1D,B0,EA,54,8D,72,84,B9,1D,D7,34,\
BC,78,C8,D0,9D,B4,AE,C8,CA,0C,B6,1E,A0,8A,AA,2B,\
97,B3,C7,B2,BF,32,06,4D,25,53,86,27,02,D3,E6,E9,\
75,A5,AC,78,B1,94,2C,A3,4A,1D,B2,FC,B7,9C,28,BA,\
85,0B,11,96,40,2B,1E,D7,47,E2,50,D7,59,00,6F,FE
"RO_Mem"=hex:\
BC,B4,29,D4,62,BC,35,4F,5D,39,87,EC,D1,A4,AA,E8,\
85,1F,F7,6D,92,0F,16,71,39,5C,FB,C0,01,16,12,46,\
34,E8,26,D7,52,1D,B0,EA,54,8D,72,84,B9,1D,D7,34,\
BC,78,C8,D0,9D,B4,AE,C8,CA,0C,B6,1E,A0,8A,AA,2B,\
97,B3,C7,B2,BF,32,06,4D,25,53,86,27,02,D3,E6,E9,\
75,A5,AC,78,B1,94,2C,A3,4A,1D,B2,FC,B7,9C,28,BA,\
85,0B,11,96,40,2B,1E,D7,47,E2,50,D7,59,00,6F,FE
My question is: what do i have to do now with that result files from Dumper?
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 12/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
Best regards,
Zuben (zeg2309@hotmail.com)
December 9, 2014 at 10:41 AM
Carlos
REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\00001BA5]
"Name"="Sentinel SuperPro 1BA5"
"Copyright"="None"
"Created"="Mon Dec 22 19:27:14 2014"
"DongleType"=dword:00000003
"Type"=dword:00000000
"Option"=hex:02,00,03,80,7F,00,00,00
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
59,14,A5,1B,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
December 23, 2014 at 3:33 AM
Anonymous said...
Hi Son Nguyen, your great instructions are easy and worked pretty fine with a super pro sentinel. Unfortunately the software that I was trying to emulate(which contains an additiona
file as activation code) recognize that this doesnt belong to the hardware key..
December 28, 2014 at 2:59 PM
Anonymous said...
Hi Son Nguyen
I am using a aladdin knowledge hardlock usb 1.02
when i try a run RTDumper GUI after retrieving the password 0000:630A with the hardlock emulator 32 that created a hl630A.bin file
i am getting the following error.
Can you please assist
>>>> START HASP 4/HL DUMPING <<<<
Dumping Password: 0000 630A
Dumping with legacy API...
IsHasp: OK (status 1)
GetHaspStatus: OK (status 0)
API version: 8.10
Port number: 0000 (0)
GetHaspStatus: FAIL (status 0)
The requested HASP key was not found!!!
Dumping aborted!!!
January 2, 2015 at 1:31 PM
Anonymous said...
thanks son Nguyen, i found my problem - 630A
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 13/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
January 2, 2015 at 1:51 PM
Anonymous said...
@ Son Nguyen: i have a question for you.
HASPHL2010 had a "load dump" function. Why didn't you use it for Step 3. :D
January 9, 2015 at 1:40 AM
HASPHL2010 is not freeware. You must have the license to use the "load dump" function.
January 9, 2015 at 4:52 PM
Anonymous said...
@Son Nguyen:
ah... i have ever loaded successfully with HASPHL2007 "load dump" function, so this the reason for the question above. Thank you for your clear answer :).
January 9, 2015 at 7:05 PM
M1987 said...
@Son Nguyen
Write hasp.dmp
Write hhl_mem.dmp
Sending to solver hasp.dmp
Solver return
January 10, 2015 at 6:46 AM
Anonymous said...
http://exetools.team-talk.net/
Sign here and ask for help I will help you for free, SRM/HL/SuperPro/UltraPro/SHK/Eutron etc.
January 11, 2015 at 1:00 AM
M1987 said...
@ Anonymous
Anonymous said...
error 1031: envelope unknown error ???? :o
January 12, 2015 at 6:02 PM
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 14/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
SkazDime said...
...and this will also work on winxp?
January 13, 2015 at 10:35 PM
Anonymous said...
as I get the Dtable?
January 14, 2015 at 10:20 AM
ahmed said...
hi
Thank you for writing these instructions.
I'm having error -19
while trying to read dump from hasp HL WITH HASPHL2010.
Anonymous said...
Thank you very much for your explanations. It almost worked for my HASP HL Dongle... but did not :(
At first, I had a yellow exclamation mark in my device list. I replaced the dword EA with 4A as explained and after rebooting, everything seemed OK : with no dongle plugged, those
lines appeared in device manager:
SafeNet Inc. HASP Key
SafeNet Inc. USB Key
Yet, the application did not start saying it could not find the dongle.
When I plug the real USB dongle, there are not two but THREE lines in device mgr:
SafeNet Inc. HASP Key
SafeNet Inc. USB Key
SafetNet Inc. Sentinel HL
So I guess I might need a further step to emulate this additional driver? Correct?
Any idea?
Actually I already managed to eliminate HASP, HASP HL and SuperPro USB dongles but maybe I were lucky. And I did that for my curiousness and for funny!
For your cases, you should dig the Internet to find more information about MultiKey Emulator. I cannot advise you guy anything. I'm so sorry!
January 26, 2015 at 8:08 PM
xuannamvt said...
This comment has been removed by the author.
February 3, 2015 at 5:28 PM
Anonymous said...
How to handle Sentinel dual key?
February 5, 2015 at 8:51 AM
Anonymous said...
Is there a chance to do this procedure on a vmware machine?
February 5, 2015 at 9:54 AM
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 15/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
Anonymous said...
Worked prefectley for me on a HASP4.
Remember ... it's important you reboot as the registry change will take effect only then. If you don't want to reboot you can terminate explorer.exe process and start it agai so that th
registry gets read again including the merged file.
Thanks so much for your help.
February 11, 2015 at 3:16 AM
Anonymous said...
Thank you for the useful instructions. I wan to to emulate a Sentinel SuperPro and i noticed that ssp2mk enumerate my dongle as two dongles when my application is running. Wha
should i do?
Thank you in advance
February 11, 2015 at 5:32 AM
Anonymous said...
Any Idea What I need to do to eliminate these errors?
>>>> START HASP 4/HL DUMPING <<<<
Dumping Password: 3583 2E1B
Dumping with legacy API...
IsHasp: OK (status 1)
GetHaspStatus: OK (status 0)
API version: 8.10
Port number: 00C9 (201)
Key type: HASP4 Std (00 00)
HaspGeneration: HASP4 is connected
HASPNetStatus: FAIL (status -4)
HaspID: 00000000 (hex), 0 (decimal)
HaspCode: OK
HaspEncodeData: OK
HaspDecodeData: OK
MemoHaspRead 1: FAIL (status -4)
Memory Size: 00F8 (248) (status 0)
MemoHaspRead 2: FAIL (status -4)
TimeHaspID: FAIL (status -29)
TimeHaspRead 1: FAIL (status -29)
TimeHaspRead 2: FAIL (status -29)
Write hasp.dmp
Write hhl_mem.dmp
Sending to solver hasp.dmp
Solver return
Anonymous said...
Hi i'm trying to install "Multikey32bit" on a win7 32bit system but the steps described above doesn't seem to work for me.
The .reg dump file was provided for me by a friend and the the installation process works on 64 bit systems, even on win 8.1, but the Multikey driver doesn't install for me correctly o
my 32bit win7.
It starts installing and after a second it tells me that the driver couldn't be installed properly, and it appears in the device manager as "SafeNET Inc. USB Key" with an exclamation m
hence it didn't install properly.
The dongle protected software want's me to install "Safenet Sentinel runtime" and i do so every time.
The older version of the software uses "Hasp-HL Aladin 5.22" so i have it already installed on my machine, and it did work with "HaspHL2007 emulator" (its simmilar to the HaspHL2
one) just fine. I even uninstalled the the driver what was installed by HaspHL2007, and stopped it's emulator service so there are no conflicts between the old emulator and the new
Multykey32bit, but it doesn't seem to work anyway.
1. Installed the software + Hasp-HL Aladin driver 5.22 + the new version software + Sentinel runtime, Multikey32bit didnt install properly, "SafeNet Inc. USB key" with exclamation m
appeared in device manager, the software didn't work-saved (it has a saving restriction without the dongle)
2. Installed the new version software + only the Sentinel runtim, Multikey32bit didnt install properly, "SafeNet Inc. USB key" with exclamation mark appeared in device manager, the
software didn't work-saved (it has a saving restriction without the dongle).
3. Installed the software + Hasp-HL Aladin 5.22 driver, the Multikey32 driver installed, and appeared in the device manager as "Aladin usb key" but the new version software didn't w
saved (it has a saving restriction without the dongle).
I'm guessing, that there is some incompatibility whit the "Sentinel runtime" and the Multikey32 bit driver, or i don't know, it beats me. Installing Win7 x64 or Win8.1 x64 wouldn't be th
greatest solution for me because my PC is a bit old and has only 2 gigs of DDR2.
I would really appreciate if someone could help me out in this in this matter.Sorry for the long description or my bad English. Thanks in advance!
February 15, 2015 at 6:45 AM
av said...
Hi everybody,
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 16/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
I have a HASP SRM dongle and i want to know if it´s possible to emulate it.
Once i create the .dmp file, i don´t know what to do after for emulate it. I read that this is very difficult and even more under Win7 64bits.
I have hypack 2015 and I am trying to dump by using HASPHL 2010 but its not showing the passwords what I do?
February 16, 2015 at 2:55 AM
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\000012A0]
"Name"="Sentinel SuperPro 12A0"
"Copyright"="None"
"Created"="Fri Feb 20 18:44:15 2015"
"DongleType"=dword:00000003
"Type"=dword:00000000
"Option"=hex:02,00,03,80,7F,00,00,00
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
85,04,A0,12,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
I didn't edited it becouse you don't say to do it for SuperPro,or maybe i misunderstood.
Once i'm done with all the steps i can find the Sentinel Driver installed but even with that my software runs in DEMO mode.
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 17/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
With the Sentinel Plugged works properly,without it doesn't.
Cheers,
Cristian
February 20, 2015 at 9:48 AM
Anonymous said...
Dear Mr Son Nguyen
i change to
"Type"=dword:0000004A"
but when i run aplication show message "Debugger detected" program error windows 8.1 x32bit
Anonymous said...
it s working very good!! i m trying also in windows 8 Pro64bit.. but i m having some problems.. it blocks some driver unsigned... i m surfing to get the solution and i ll share here if i g
February 23, 2015 at 11:28 AM
Anonymous said...
This is a great post.
Thanks for your help in these cases where whichone think are alone.
This is a comment to help someone else who can present the same problem with 2.17 hasp key to be installed on windows 7 64bit.
when inserting the key, let windows update drivers hasp look.
I personally have never had success with Windows Update, but this time, fortunately it worked. That's why I share this solution.
TJ said...
Thanks so much Son for putting this blog together, I am really hoping you can help me. Running Sentinel Superpro, I did all the steps and Sentinel Superpro is showing up under US
Drivers without the dongle plugged in. When I try to open the software it says software license is expired. With the dongle plugged in it works fine. Any suggestions?
March 6, 2015 at 11:55 AM
Anonymous said...
Hi,
I have one question.
What I can do with expired dongle. Is it possible to change expiration date and reuse it?
March 10, 2015 at 5:30 AM
Anonymous said...
Thank you for your great post.
I finised progress as per your post.
And I met a error as below when I open my protected software.
Anonymous said...
Thank you for your great post.
I finised progress as per your post.
My key is SafeNet USB UltraPro and I met a error as below when I open my protected software.
Anonymous said...
Thank you very much for the discription.
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 18/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
Anonymous said...
Hi,
I'm run HASPHL2010 on Win 8.1 64bit.
It's tell me error 1068.
Is it because my OS.???
March 12, 2015 at 5:23 AM
-----------------
Unable to find authorized hardware key. Your key #---- may be defective(error 0xaefa,2). Contact --- for a replacement.
------------------
REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\00003BDC]
"Name"="Sentinel SuperPro 3BDC"
"Copyright"="None"
"Created"="Fri Mar 13 10:09:49 2015"
"DongleType"=dword:00000003
"Type"=dword:00000000
"Option"=hex:02,00,03,80,7F,00,00,00
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
03,54,DC,3B,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 19/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
I see that your registry file is not good. Values of "sntMemory" are almost zeroes. This is wrong! You should check the process of creating registry file again. Good luck :)
March 12, 2015 at 8:45 PM
Sonny36 said...
Thank you very much for the discription.
Anonymous said...
I got same problem as yours. But i did not get a way to resolve. Could you explain how to make safenet show in "usb controllers" tab. My virtual have been shown in system device
Thanks for your advice.
March 14, 2015 at 3:50 PM
Anonymous said...
If you're getting error 19 it means you're not running the software before you hit 'dump'.
March 16, 2015 at 5:52 AM
There are convertors from 25 pin parallel port to usb. Use this and dump it by any computer.
can you help me to emulate the 25 pin dump file from a windows xp machine to a windows 7 64b please?
March 16, 2015 at 12:36 PM
Anonymous said...
Thank you for these instructions...worked perfectly.
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 20/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
Anonymous said...
Hi, having hard time installing the emulator, I have HASP 4 dongle key. I followed your instruction 1 by 1. but the device doesn't show on device manager.. am i missing something?
Please help me.
March 16, 2015 at 11:12 PM
Anonymous said...
Sir,
I am siddharth, everything worked well for me, but when I run the software, I am getting "Desired vendor daemon is down. Check with lmgrd log file or try lmreread" error message.
Please give me solution if possible.
Thanks,
Siddharth
March 19, 2015 at 8:32 AM
Sheldor said...
Hello,
thanks for the great tutorial . It works perfectly on Windows 7 .
But there is , unfortunately, with the driver problems in Windows 8.1 and 10 , are there already a solution ?
greeting
Michael
March 23, 2015 at 10:15 AM
2. You follow the steps in this tutorial to disable drivers signature enforcement http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1
that-you-can-install-unsigned-drivers/
You also need to use dseo13b.exe to sign multikey.sys driver and remember that MultiKey only works in Test Mode. You must always stay in Test Mode.
After using those method,,is there any side effect to the dongle??
my company have just 2 HASP dongle,,i'm affraid if i use those method, the dongle won't work anymore..
March 27, 2015 at 11:55 PM
NSOLANOC said...
Is possible tu emulate hasp/hardlock dongle if i haven't the original parallel port or USB dongle connected to computer?
Anonymous said...
My dongle is "Sentinel SRM/HASP/HL Dumper v.1.3 x64 (public)" type. I dumped it with RTdumper and it produces only .dmp files. These files have the structure of .reg files but wh
merge them into registry, the emulator does not produce any key emulation. Is there something that i should do to emulate SRM dongle with multikey? Or is it not supperted.
March 28, 2015 at 7:02 AM
Ryan said...
Hello, following instructions but upon final reboot after disable driver signature, the SafeNet Inc. USB Key fails driver install. Any ideas?
April 1, 2015 at 9:00 AM
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 21/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
Anonymous said...
I have working registry files, but I need the machine ID to reflect a number higher that is capable from two sets of HEX (65535). I need the machine ID to change to 71414. Can any
help me to make the necessary registry modification to show 71414 as my machine ID ?
April 1, 2015 at 3:00 PM
Anonymous said...
Hi Son,
I’m blocked in the first part with the dumper, in DUMPER tab the password not displayed in HASP/HL Dongles window, any idea?
Thank you for your help.
April 3, 2015 at 12:52 PM
Anonymous said...
I followed the guide step by step, with W7 32bit. after restarting the system sees SafeNet USB SuperPro / Ultrpro. but it does not work the software says serial number not recogniz
following reg file.
REGEDIT4
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\0000DB7F]
"Name"="Sentinel SuperPro DB7F"
"Copyright"="None"
"Created"="Sat Apr 04 23:21:19 2015"
"DongleType"=dword:00000003
"Type"=dword:00000000
"Option"=hex:02,00,03,80,7F,00,00,00
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
B3,06,7F,DB,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
April 4, 2015 at 3:04 PM
Anonymous said...
hello;
I work with win7 x32 or x64; and I have a usb dongle which is marked hasp hl; i downloaded hasphl2010 and I execute as you described, and when I run my program protected to
retrieve the two passwords with drump tab nothing is displayed, and thank you in advance
April 7, 2015 at 3:14 AM
Anonymous said...
I tried this procedure but something failed. What do I have to do to reverse everything and start again?
April 9, 2015 at 8:36 AM
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 22/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
Hi brien
Emulate the dump to multikey and then use in win 7 using the steps mention above.
Sunil
skr706@gmail.com
April 9, 2015 at 7:54 PM
Anonymous said...
Hello Son Nguyen,
i have a virtual aladdin hardlock (multikey) run on win7 x32.. but not work in win7 x64 :( is a driver problem?!
April 14, 2015 at 11:49 AM
Lawser L said...
how to upgrade dng file. please help
April 20, 2015 at 4:04 AM
Markus said...
Hey Guys for all who have proplems with ssp2mk here some things to know!
Start ssp2mk:
1. plugin Dongle
2. Click top left to search for the pluged dongle
3. If the Dongle was found right click and click on Dump.
4. one more right click on the dongle now select in options mutlikey older 18.x.x
5. Now you can save the reg file an install it.
6. something to know:
I have many zeroes in my regfile but that is sometimes normal there are no algos.
david said...
Hi Mr.Son Nguyen
I'm Ranjith
i have follow your instructions to make the emulator. everything is done emulator works better.
in device manager showing HASP and USB key good. but when i starting protected software it's saying
HASP key not found
please help me to fix this error
April 21, 2015 at 10:23 AM
antonio said...
hi everyone, i like so much this blog because some times ago help me to clone a usb sentinel, but now i have a problem. using the same reg i can't run the software.
for cloning the hardware key, i useed hasp2010 to find the password, then i useed h5dmp with the 2 string 0xpw1 0xpw2. then with unidmp2reg i created the .reg.
so i install multikey 64 bit and the game was done.the software has running.
now , i try to put the same key in a new laptop with win7(as before) but dongle id is not recognized . why? anyone has solutions? this is my reg:
REGEDIT4
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\MultiKey\Dumps\225D0ABE]
"Name"=""
"Copyright"="Copyright (C) 2014 Admin"
"Created"="10/02/2014 12:39:58"
"DongleType"=dword:00000001
"SN"=dword:0C8CE2E7
"Type"=dword:000000EA
"Memory"=dword:00000001
"SecTable"=hex:2B,1C,D9,DC,27,14,D5,D4
"NetMemory"=hex:00,00,00,00,00,00,00,00,00,00,FF,FF
"Option"=hex:00,01,02,4A,1F,01,0A,01,0E,01,0B,28,33,00
"Data"=hex:\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 23/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,FF,\
57,42,50,54,01,00,00,00,10,00,00,00,00,00,28,B1,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
"ColumnMask"=dword:000000C3
"CryptInitVect"=dword:0000001F
antonio said...
i forgot to say that i try to make it run on win xp too (32 bit) but still not recognized the dongle.
is it possibloe from hasp.dmp and hll.mem.dmp convert to hasp2007 .dng?
i have a .dng of another software and i try with h5dmp to create the reg but h5dmp says *hasp4* error .also with Son Ngueyen's procedure can't create the reg. any idea?
the .dng work perfectly in xp, and a way to run on win7 is with vmware (with unit mode seeting semms like work in win7).
another question is: is it possible share a dng hasp2007 over network like a usb? there are some software like usb over ethernet or usb over network.
Thanks in advance.
April 30, 2015 at 6:00 AM
henderson said...
Hi Son Nguyen.
I followed all your steps, read every comment in this page and could not make my dongle work.
I have a hasp4 dongle. I fallow every step of your tutorial. I change that last bits at the registry (000000EA to 0000004A).
But my software keeps telling me there is no keylock available.
Anonymous said...
Hi. If any body ready to help me to generate I can pay him money.
May 5, 2015 at 8:56 AM
My Dongle
Who is RTDumperGUI in the dongle dump but he is not coming reg file
Saved Dump_EA_83449_0.dmp
May 10, 2015 at 12:23 AM
NJ Boyd said...
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 24/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
Just a heads-up it looks like someone's reposted a stripped-back version of your post behind a Scribd pay-wall here:
http://www.scribd.com/doc/241030374/StepsForEliminatingDongleOnWindows7-pdf#scribd
May 22, 2015 at 4:37 AM
Anonymous said...
I still try to emulate dongle. And I got stucked at point 3. Actually there is a mistake in this tutorial. I can't type two parts of dongle password in RTDumperGUI. It's possible only whe
you use SSP2MK_1.2. With RTDumperGUI you just have to follow readme.txt. Also I still do not understand what exactly I suppose to do with my new created registry file? It has dm
extansion and located in HASP-Multikey Emulator folder on the desktop. I chached extension and name of it to my dongle password (4B1740D7.reg) and left at the same folder on
desktop. Now regarding to this manual I have to go to regestry editor and replace some file. How? What file?)
Thnx man!
May 26, 2015 at 9:57 PM
Anonymous said...
HI, thanks for your post
I used RTDumperGUI to create .reg file. it creates two .reg files and a .dat file.
i edited each of them and followed the steps entirely but the software still needed Hardlock. mine is Aladdin hard lock. with this passkey 000026AC.
May 28, 2015 at 7:43 AM
Anonymous said...
Contact us at:
http://www.cadshop.ru
or
email to donglebackup@gmail.com
Anonymous said...
Is the dongle for www.xcapi.com working?
May 31, 2015 at 7:53 AM
Anonymous said...
Hi
It was nice to see your effort. I've got a Unikey dongle with a software and not able to run it without the usb dongle.
Can you help me regarding this problem as it's a hassle to keep it in my pocket for 24/7.
Regards
June 16, 2015 at 3:35 AM
Anonymous said...
Hi,
I previously have succeeded "undongle" a certain software by using HaspHL2007 and EDGEHASP. And I have noticed that they only worked with 32bit windows versions.
Is there a way to convert it to 64bit? Although I have tried installing multikey on 64bit, HaspHL2007 will work.
Thanks
P.S. don't worry I always check on this website from time to time.
June 18, 2015 at 2:02 AM
Anonymous said...
Hi Son Nguyen
Anonymous said...
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 25/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
Hi,
My name is John
I have a program nammed caddie 20 and it also uses a dongle run the full version , is there anyway i can emulate this dongle?
June 28, 2015 at 11:18 AM
Anonymous said...
I want wilcom embroidery studio e3 crack. If anyone successfully crack this software then please give me the crack link.
Also I have a dongle damp. This is another software. My dongle is damaged/broken. I want to upload it. Please give me your email id. I want this crack dongle. My id is
rnf_bd@yahoo.com
June 30, 2015 at 10:28 PM
Anonymous said...
Hi so does the computer have to stay in test mode for it to work with out the dongle Thanks
July 2, 2015 at 1:48 AM
Anonymous said...
I succesfuly installed multikey on win 7 64-bit ( per your instructions) but i can;t seem to get this key to work.Is there something i must change in the key? pls be aware that i do not
acces to the original key anymore to make another dump. thx for any reply.
July 13, 2015 at 9:21 AM
Anonymous said...
Hello,
will it also work for WIN 8.1 and the coming update WIN 10?
Thanks
July 15, 2015 at 11:49 AM
My problem is as follows :
I'm trying to follow the steps as you described , but when I run HASP / hardlock , the " Dump " is blank. So I tried to run the Sentinel dongle Super / Pro , but the results obtained are
messages one below the other saying " . Dumping disabled , Unable to access Sentinel SuperPro system drive , Failed to initialize SPROMEPS API , Failed to access SNTNLUSB
device"
I have also changed the key to 0,000,004th still not the right. And when I try to open the engineering program the following message appears : " Sentinel LDK Protection System -
Sentinel Key not found ( H0007 ) .
Can you help me? The program I am trying to open is the QiBuilder . You do not have to open that program?
Yur said...
Hellow? I can't dump my program for step 3: dumping 7780:08E8 error -17
What is it?
Thanks
July 31, 2015 at 1:57 AM
Yur said...
Hi, I have a same problem!
Mihai AbrudanOctober 24, 2014 at 5:58 AM
Hello. First of all thank you for this great post. I tried to clone a usb HASP HL dongle, everything went ok but the application that requires the dongle does not work, saying "no secu
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 26/27
10/06/2019 Son Nguyen's blog: How to install HASP MultiKey USB Dongle Emulator on Windows 7 64 bit
key detected". The drivers seem to be installed ok, I have changed the dword for Hasp HL, in device manager I have SafeNet Inc. HASP Key and SafeNet Inc. USB Key
but when the dongle is connected there is a new one called SafeNet Inc. Sentinel HL Key and two SafeNet Inc. USB Key . Any ideas? Thank you!
Reply
July 31, 2015 at 4:48 AM
Bạn hướng dẫn giúp mình sử dụng emulator này để cài PM W oody 2.0 với nha,
mình làm theo hình hướng dẫn mà vẫn không được, còn phần hướng dẫn download trên mạng cũng không làm được.
Anonymous said...
Hi again,
have upgraded to Win 10. Now under my USB devices there isn´t anymore Safenet USB Super/Pro.
Please help me , I'm stocked on running the emulator. I cant dump. What the problem with that?I lost our company dongle and I will pay for that We have 1 remaining dongle, i'm
planning to clone that so i can suggest to my boss to use that clone :( Please someone help me.
August 4, 2015 at 3:51 AM
Post a Comment
ngocson2vn.blogspot.com/2014/08/how-to-install-hasp-multikey-usb-dongle.html 27/27