Sie sind auf Seite 1von 21

Ceiling Diffusers

Supply Air Grilles

Return Air Grilles

Louvers

Jet Diffusers

Floor Diffusers

Dampers

Damper Actuators

VAV Terminal Units

Flexible Air Duct


SUPPLY AIR GRILLES CONTENTS

CONTENTS
• GV & GH Double Deflection Supply Air Grille
• GA Supply Air Linear Bar Grille
• RA/RAC Bar Grille
• Supply Air Grilles Accessories

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SUPPLY AIR GRILLES

GV & GH Double Deflection Supply Air Grille


■ Materials
• GV-T & GH-T Frame 0.7mm, blade 3.4mm SPGC galvanized steel.
• GV-S & GH-S Frame 0.7mm, blade 0.3mm stainless steel SUS. 304.
• GV-A & GH-A Extruded aluminium A6063.

■ Surface Finish
• GV-T & GH-T Baked white powder coat as standard.
• GV-S & GH-S Stainless steel original colour.
• GV-A & GH-A Baked white powder coat or natural anodized.

■ Features
• Model GV & GH is made up of two sets of individually adjustable air foil blades.
• The grille will come in more sections for blade length that is more than 600mm.
• Non-standard sizes are available.
• Approximately 70% free area when blades are fully open.

■ Accessories
• G1 Opposed blade damper.
• G2 Volume extractor.

■ Models
• GV: Vertical blades in front.
• GH: Horizontal blades in front.

■ GV & GH Construction Illustrations

■ GV & GH Physical Dimension Unit:mm


Thickness Standard Size A B D
Model Materials Order Key
Frame Blade WxH Duct Size Wall Size Face Size
W+60
GV-T & GH-T SPGC Steel 0.7 3.4 350 x150 GV & GH - T + G1 - 350 x 150
H+60
400 x 150
W+10 W+20
GV-S & GH-S Stainless Steel SUS. 304 0.7 0.3 450 x 150 W H
H+10 H+20 W+54
500 x 150 Materials
H+54
GV-A & GH-A Extruded Aluminium A6063 1.0 3.8 500 x 250 Model Accessories

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

GV & GH page 1 of 6
SUPPLY AIR GRILLES

GV & GH Double Deflection Supply Air Grille


GV+G1 & GH+G1 Opposed Blade Damper
■ Materials
• G1-T SPGC galvanized steel.

■ Surface Finish
• G1-T Matt black as standard.
• The G1 opposed blade damper is gear operated & can be set at fully open, half
open & fully close.
• G1 Maximum dimension is 500mm x 500mm. Damper size bigger than this will
come in sections.

■ GV & GV+G1 Physical Dimension Unit:mm


Model Depth Neck Size A Duct Size B Wall Size D Face Size
W+10 W+20 W+54 / 60
GV 48 WxH
H+10 H+20 H+54 / 60
1 W+15 W+20 W+54 / 60
GV + G1 123 WxH
A H+15 H+20 H+54 / 60

■ GH & GH+G1 Physical Dimension Unit:mm


Model Depth Neck Size A Duct Size B Wall Size D Face Size
W+10 W+20 W+54 / 60
GH 48 WxH
H+10 H+20 H+54 / 60
1 W+15 W+20 W+54 / 60
GH + G1 123 WxH
A H+15 H+20 H+54 / 60

GV+G2 & GH+G2 Volume Extractor


• G2 volume extractor helps in balancing by guiding a regulated amount of air for
supply air grilles from the main duct & enable even air distribution over the
entire surface of grille.
• Maximum angle for G2 is 35˚ - 40˚.
• Materials for G2 is 1.0mm SPGC galvanized steel & surface finish is matt black.

• Uneven air distribution • Even air distribution with G2

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

GV & GH page 2 of 6
SUPPLY AIR GRILLES

GV & GH Double Deflection Supply Air Grille


■ GV & GH Performance Data (1)
Neck Vel. M/S 2 2.5 3 3.5 4 4.5 5
Neck Size Neck Size Total 0˚ 0.8 1.2 1.7 2.2 3.0 3.8 4.6
Area m2 mm Press 22˚ 0.9 1.4 1.9 2.5 3.5 4.2 5.2
(mmAq) 45˚ 1.3 2.1 2.8 3.8 5.0 6.4 7.8
CMH 72 90 108 126 144 162 180
0˚ 1.8 - 3.5 2.4 - 4.2 3.0 - 4.8 3.7 - 5.2 3.8 - 5.7 4.2 - 6.0 4.5 - 6.4
Throw
0.01 100 x 100 22˚ 1.5 - 3.0 1.8 - 3.2 2.4 - 3.8 3.0 - 4.2 3.0 - 4.4 3.3 - 4.8 3.6 - 5.1
(m)
45˚ 1.0 - 1.8 1.2 - 2.0 1.5 - 2.4 1.8 - 2.7 2.0 - 2.6 2.1 - 3.0 2.2 - 3.2
NC - - - - - 23 25
CMH 108 135 162 189 216 243 270
0˚ 2.2 - 3.9 2.5 - 4.5 3.3 - 5.2 3.9 - 5.7 4.5 - 6.1 4.7 - 6.6 5.0 - 6.9
Throw
0.015 150 x 100 22˚ 1.8 - 3.1 1.9 - 3.6 2.8 - 4.2 3.1 - 4.6 3.6 - 4.8 3.8 - 5.3 4.0 - 5.6
(m)
45˚ 1.0 - 2.1 1.2 - 2.4 1.5 - 2.7 2.1 -3.0 2.1 - 3.1 2.3 - 3.3 2.5 - 3.4
NC - - - - 21 25 27
CMH 144 180 216 252 288 324 360
0˚ 2.8 - 4.8 3.4 - 5.5 4.3 - 6.2 4.5 - 6.7 4.9 - 7.0 5.2 - 7.6 5.5 - 8.0
150 x 150 Throw
0.02 22˚ 2.2 - 4.0 2.8 - 4.3 3.4 - 4.9 3.7 - 5.2 4.0 - 5.5 4.2 - 6.0 4.5 - 6.5
200 x 100 (m)
45˚ 1.3 - 2.6 1.6 - 2.8 .9 - 3.0 2.2 - 3.1 2.5 - 3.4 2.8 - 3.5 3.0 - 3.7
NC - - - 21 25 27 29
CMH 180 225 170 315 360 405 450
0˚ 3.2 - 5.7 3.9 - 6.4 4.8 - 6.8 5.0 - 7.2 5.7 - 7.8 6.2 - 8.4 6.4 - 8.8
Throw
0.025 250 x 100 22˚ 2.6 - 4.5 3.0 - 5.2 3.8 - 5.4 4.2 - 5.7 4.5 -6.3 4.8 - 6.7 5.1 - 7.0
(m)
45˚ 1.5 - 2.7 2.1 - 3.0 2.4 - 3.3 2.7 - 3.6 2.9 - 3.9 3.1 - 4.2 3.3 - 4.6
NC - - - 22 26 28 30
CMH 216 270 324 378 432 486 540
0˚ 3.5 - 6.2 4.3 - 6.9 5.5 - 7.7 5.8 - 8.3 6.5 - 8.9 6.8 - 9.4 7.1 - 9.8
200 x 150 Throw
0.03 22˚ 2.8 - 4.9 3.4 - 5.4 4.3 - 6.2 4.6 - 6.5 5.2 - 7.1 5.3 - 7.4 5.5 - 7.7
300 x 100 (m)
45˚ 1.8 - 3.1 2.2 - 3.3 2.5 - 3.7 2.8 - 4.0 3.1 - 4.3 3.2 - 4.6 3.4 - 4.9
NC - - - 22 26 28 30
CMH 252 315 378 441 504 567 630
0˚ 3.8 - 6.8 4.8 - 7.5 5.6 - 8.3 6.5 - 8.9 6.8 - 9.5 7.2 - 10.0 7.7 - 10.6
250 x 150 Throw
0.035 22˚ 3.0 - 5.2 3.8 - 5.7 4.5 - 6.5 5.2 - 7.1 5.3 - 7.7 5.7 - 8.1 6.2 - 8.6
350 x 100 (m)
45˚ 1.8 = 3.2 2.3 - 3.6 2.8 - 4.0 3.2 - 4.3 3.5 - 4.6 3.7 - 4.9 3.9 - 5.2
NC - - - 23 27 29 32
CMH 288 360 432 504 576 648 720
0˚ 4.0 - 7.2 5.1 - 7.9 6.2 - 8.8 6.7 - 9.4 7.3 - 10.1 7.6 - 10.8 7.9 - 11.3
200 x 200 Throw
0.04 22˚ 3.2 - 5.6 4.1 - 6.3 4.9 - 7.0 5.4 - 7.6 5.7 - 8.2 6.2 - 8.7 6.4 - 9.0
400 x 100 (m)
45˚ 2.0 - 3.4 2.7 - 3.9 3.0 - 4.3 3.4 - 4.6 3.7 - 5.0 3.9 - 5.3 4.1 - 5.6
NC - - - 24 28 30 33
CMH 324 405 486 567 648 729 810
0˚ 4.2 - 7.7 5.3 - 8.4 6.8 - 9.3 7.1 - 9.9 7.8 - 10.8 8.1 - 11.4 8.4 - 12.0
300 x 150 Throw
0.045 22˚ 3.5 - 6.2 4.4 - 6.8 5.4 - 7.5 5.6 - 8.0 6.2 - 87 6.5 - 9.1 6.8 - 9.5
450 x 100 (m)
45˚ 2.3 - 3.7 2.9 - 4.3 3.3 - 4.6 3.5 - 4.9 3.9 - 5.3 4.1 - 5.7 4.4 - 6.2
NC - - 21 25 28 31 35
• Throw is based on terminal velocities of 0.5 m/s - 0.25 m/s respectively.
• NC value is based on a room absorption of 10 dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20.
• With G1 damper, the pressure loss is 1.136P, and add 2 for NC value.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

GV & GH page 3 of 6
SUPPLY AIR GRILLES

GV & GH Double Deflection Supply Air Grille


■ GV & GH Performance Data (2)
Neck Vel. M/S 2 2.5 3 3.5 4 4.5 5
Neck Size Neck Size Total 0˚ 0.8 1.2 1.7 2.2 3.0 3.8 4.6
Area m2 mm Press 22˚ 0.9 1.4 1.9 2.5 3.5 4.2 5.2
(mmAq) 45˚ 1.3 2.1 2.8 3.8 5.0 6.4 7.8
CMH 360 450 540 630 720 810 900
250 x 200 0˚ 4.5 - 7.9 5.8 - 8.8 6.9 - 9.7 7.6 - 10.6 7.9 - 11.3 8.5 - 11.9 9.2 - 12.5
350 x 150 Throw
0.05 500 x 100 22˚ 3.7 - 6.4 4.6 - 7.0 5.5 - 7.8 6.1 - 8.6 6.4 - 9.1 6.8 - 9.5 7.4 - 10.1
(m)
550 x 100 45˚ 2.5 - 3.0 3.0 - 4.6 3.4 - 4.9 3.7 - 5.2 4.0 - 5.5 4.3 - 5.9 4.6 - 6.5
NC - - 21 26 29 32 36
CMH 432 540 648 756 864 972 1080
250 x 250
300 x 200 0˚ 4.9 - 8.6 6.3 - 9.6 7.4 - 10.5 8.3 - 11.4 8.9 - 12.2 9.4 - 13.1 9.9 - 14.0
Throw
0.06 400 x 150 22˚ 4.1 - 6.8 4.9 - 7.8 5.9 - 8.4 6.7 - 9.3 7.1 - 9.8 7.6 - 10.4 8.1 - 11.2
600 x 100 (m)
45˚ 2.6 - 4.2 3.2 - 4.9 3.8 - 5.2 4.1 - 5.8 4.4 - 6.2 4.7 - 6.6 5.0 - 6.9
650 x 100
NC - - 21 26 29 32 37
300 x 250 CMH 504 630 756 882 1008 1134 1260
350 x 200 0˚ 5.4 - 9.6 6.9 - 10.7 8.3 - 11.7 9.1 - 12.5 9.6 - 13.5 10.2 - 14.2 10.8 - 14.8
450 x 150 Throw
0.07 22˚ 4.5 - 7.6 5.5 - 8.6 6.6 - 9.4 7.3 - 10.0 7.8 - 10.8 8.2 - 11.4 8.5 - 12.0
500 x 150 (m)
700 x 100 45˚ 2.8 - 4.7 3.5 - 5.2 4.2 - 5.8 4.4 - 6.4 4.8 - 6.8 5.2 - 7.2 5.4 - 7.5
750 x 100 NC - - 21 26 30 33 38
CMH 576 720 864 1008 1152 1296 1440
350 x 250 0˚ 5.9 - 10.1 7.3 - 11.3 8.9 - 12.4 9.6 - 13.5 10.4 - 14.4 11.0 - 15.2 11.5 - 196.0
400 x 200 Throw
0.08 550 x 150 22˚ 4.7 - 8.0 5.7 - 9.2 7.0 - 9.9 7.8 - 10.7 8.3 - 11.5 8.7 - 12.2 9.2 - 12.8
(m)
800 x 100 45˚ 3.0 - 5.0 3.8 - 5.5 4.4 - 6.2 4.8 - 6.8 5.2 - 7.2 5.6 - 7.7 5.9 - 8.0
NC - - 22 27 31 34 39
CMH 648 810 972 1134 1296 1458 1620
300 x 300
450 x 200 0˚ 6.2 - 10.7 7.8 - 12.0 9.4 - 13.2 10.2 - 14.2 11.0 - 15.2 11.7 - 16.2 12.2 - 17.0
Throw
0.09 600 x 150 22˚ 5.0 - 8.6 6.1 - 9.6 7.5 - 10.5 8.2 - 11.3 8.8 - 12.2 9.3 - 12.9 9.8 - 13.6
850 x 100 (m)
45˚ 3.2 - 5.3 4.0 - 5.9 4.7 - 6.6 5.1 - 7.1 5.5 - 7.6 5.8 - 8.0 6.2 - 8.2
900 x 100
NC - - 23 27 32 35 39
350 x 300 CMH 720 900 1080 1260 1440 1620 1800
400 x 250 0˚ 6.6 - 11.3 8.3 - 2.7 9.9 - 13.9 10.9 - 14.9 11.5 - 16.0 12.2 - 16.9 12.8 - 17.9
500 x 200 Throw
0.1 22˚ 5.2 - 9.1 6.5 - 10.1 8.0 - 11.2 8.6 - 12.0 9.2 - 12.8 9.8 - 13.6 10.3 - 14.4
650 x 150 (m)
700 x 150 45˚ 3.4 - 5.6 4.3 - 6.4 5.0 - 7.0 5.4 - 7.5 5.7 - 8.0 6.1 - 8.2 6.5 - 8.7
1000 x 100 NC - - 23 28 32 35 40
400 x 300 CMH 964 1080 1296 1512 1728 1944 2160
450 x 250 0˚ 7.1 - 12.5 9.0 - 13.9 11.0 - 15.1 11.8 - 16.5 12.6 - 17.5 13.4 - 18.5 14.1 - 19.5
550 x 200 Throw
0.12 22˚ 5.6 - 10.0 7.0 - 11.2 8.8 - 12.1 9.4 - 13.3 10.0 - 14.0 10.7 - 14.8 11.3 - 15.6
600 x 200 (m)
750 x 150 45˚ 3.6 - 6.3 4.5 - 6.9 5.4 - 7.5 5.9 - 8.2 6.3 - 8.6 6.6 - 9.3 6.9 - 9.8
800 x 150 NC - - 24 29 33 36 40
450 x 300 CMH 936 1170 1404 1638 1872 2106 2640
500 x 250 0˚ 7.5 - 12.9 9.3 - 14.5 11.5 - 15.7 12.3 - 17.2 13.3 - 18.2 14.0 - 19.2 14.8 - 20.5
550 x 250 Throw
0.13 22˚ 6.0 - 10.5 7.5 - 11.8 9.3 - 12.7 10.0 - 13.9 10.5 - 14.5 11.0 - 15.1 11.8 - 16.0
650 x 200 (m)
850 x 150 45˚ 3.9 - 6.7 4.8 - 7.2 5.8 - 7.8 6.2 - 8.5 6.5 - 9.0 6.7 - 9.6 7.2 - 10.2
900 x 150 NC - - 24 29 33 36 40
• Throw is based on terminal velocities of 0.5 m/s - 0.25 m/s respectively.
• NC value is based on a room absorption of 10 dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20.
• With G1 damper, the pressure loss is 1.136P, and add 2 for NC value.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

GV & GH page 4 of 6
SUPPLY AIR GRILLES

GV & GH Double Deflection Supply Air Grille


■ GV & GH Performance Data (3)
Neck Vel. M/S 2 2.5 3 3.5 4 4.5 5
Neck Size Neck Size Total 0˚ 0.8 1.2 1.7 2.2 3.0 3.8 4.6
Area m2 mm Press 22˚ 0.9 1.4 1.9 2.5 3.5 4.2 5.2
(mmAq) 45˚ 1.3 2.1 2.8 3.8 5.0 6.4 7.8
CMH 1080 1350 1620 1890 2160 2430 2700
500 x 300
600 x 250 0˚ 8.0 - 14.0 9.7 - 15.5 11.8 - 16.9 13.0 - 18.3 14.0 - 19.5 14.8 - 20.5 15.5 - 21.8
Throw
0.15 700 x 200 22˚ 6.5 - 11.3 7.8 - 12.4 9.4 - 13.6 10.2 - 14.6 11.2 - 15.5 11.9 - 16.5 12.4 - 17.6
750 x 200 (m)
45˚ 4.0 - 7.0 4.9 - 7.5 6.1 - 8.4 6.7 - 9.1 6.9 - 9.7 7.4 - 10.5 7.8 - 10.8
1000 x 150
NC - - 24 29 33 37 40
CMH 1152 1440 1728 2016 2304 2592 2880
550 x 300 0˚ 8.3 - 14.5 10.2 - 16.0 12.4 - 17.5 13.6 - 19.0 14.6 - 20.2 15.4 - 21.4 16.2 - 22.7
650 x 250 Throw
0.16 22˚ 6.6 - 11.5 8.2 - 12.8 9.7 - 14.0 10.6 - 15.1 11.6 - 16.1 12.3 - 17.0 13.0 - 18.1
800 x 200 (m)
850 x 200 45˚ 4.1 - 7.2 1.2 - 2.4 6.4 - 8.6 6.8 - 9.4 7.3 - 10.1 7.7 - 10.7 8.2 - 11.2
NC - - 24 30 34 37 40
CMH 1296 1620 1944 2268 2592 2916 3240
600 x 300 0˚ 8.7 - 15.2 10.9 - 16.8 12.8 - 18.5 14.3 - 19.9 15.4 - 21.3 16.4 - 23.0 17.1 - 24.0
700 x 250 Throw
0.18 750 x 250 22˚ 7.0 - 12.2 8.7 - 13.5 10.2 - 14.7 11.3 - 15.8 12.3 - 16.9 13.0 - 18.5 13.7 - 19.3
(m)
900 x 200 45˚ 4.3 - 7.5 5.4 - 8.3 6.5 - 9.3 7.3 - 9.9 7.6 - 10.7 8.2 - 11.5 8.5 - 11.9
NC - 21 25 30 35 38 41
CMH 1440 1800 2160 2520 2880 3240 3600
650 x 300 0˚ 9.2 - 16.0 11.4 - 17.9 13.6 - 19.6 14.9 - 21.0 16.2 - 22.6 17.1 - 24.0 18.0 - 25.2
700 x 300 Throw
0.2 22˚ 7.5 - 12.8 9.1 - 14.3 10.8 - 15.5 12.0 - 16.7 13.0 - 18.0 13.7 - 19.3 14.3 - 20.1
800 x 250 (m)
1000 x 200 45˚ 4.5 - 7.9 5.7 - 8.7 6.8 - 9.8 7.5 - 10.5 8.0 - 11.3 8.5 - 11.9 8.9 - 12.7
NC - 21 25 30 35 38 41
CMH 1620 2025 2430 2835 3240 3645 4050
750 x 300 0˚ 9.8 - 16.8 12.0 - 19.0 14.5 - 20.7 15.0 - 22.3 17.1 - 24.0 18.1 - 25.5 19.1 - 26.8
800 x 300 Throw
0.225 850 x 300 22˚ 7.9 - 13.5 9.6 - 15.2 11.4 - 16.4 12.7 - 17.8 13.8 - 19.2 14.7 - 20.3 15.6 - 21.2
(m)
900 x 250 45˚ 4.8 - 8.2 6.0 - 9.4 7.2 - 10.3 7.9 - 11.0 8.4 - 11.9 9.0 - 12.9 9.5 - 13.5
NC - 22 26 31 36 39 41
CMH 1800 2250 2700 3150 3600 4050 4500
0˚ 10.2 - 17.8 12.6 - 16.7 15.0 - 21.6 17.0 - 23.5 17.9 - 25.2 19.0 - 26.7 20.1 - 28.2
850 x 300 Throw
0.25 1000 x 250 22˚ 8.2 - 14.3 10.0 - 15.9 11.8 - 17.2 13.5 - 18.7 14.4 - 20.1 15.3 - 21.3 16.1 - 22.4
(m)
45˚ 5.0 - 8.7 6.2 - 9.7 7.4 - 10.7 8.4 - 11.6 8.8 - 12.6 9.5 - 13.5 10.0 - 14.2
NC - 22 27 32 36 39 42
CMH 1944 2430 2915 3402 3888 4374 4860
0˚ 10.5 - 18.5 13.1 - 20.7 15.6 - 22.7 17.5 - 24.5 18.7 - 26.3 19.8 - 27.8 21.0 - 29.2
Throw
0.27 900 x 300 22˚ 8.5 - 14.7 10.5 - 16.5 12.4 - 18.0 14.0 - 19.5 15.0 - 21.0 15.9 - 22.2 16.8 - 23.3
(m)
45˚ 5.3 - 9.2 6.5 - 10.2 7.7 - 11.3 8.7 - 12.2 9.3 - 13.0 9.9 - 13.9 10.5 - 14.6
NC - 22 27 32 36 39 42
CMH 2160 2700 3240 3780 4320 4860 5400
0˚ 11.0 - 19.5 13.7 - 21.6 16.3 - 24.1 18.5 - 26.0 19.6 - 27.7 20.9 - 29.3 22.2 - 31.0
Throw
0.3 1000 x 300 22˚ 8.9 - 15.5 11.0 - 17.3 13.0 - 19.2 14.9 - 20.7 15.8 - 22.2 16.8 - 23.4 17.8 - 24.6
(m)
45˚ 5.5 - 9.7 6.7 - 10.7 8.0 - 12.0 9.3 - 12.9 9.9 - 13.8 10.5 - 14.6 11.0 - 15.4
NC - 23 28 32 37 40 43
• Throw is based on terminal velocities of 0.5 m/s - 0.25 m/s respectively.
• NC value is based on a room absorption of 10 dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20.
• With G1 damper, the pressure loss is 1.136P, and add 2 for NC value.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

GV & GH page 5 of 6
SUPPLY AIR GRILLES

GV & GH Double Deflection Supply Air Grille


■ GV & GH Performance Data (4)
Vel. M/S 2 2.5 3 3.5 4 4.5 5
Neck Size Neck Size Total 0˚ 0.8 1.2 1.7 2.2 3.0 3.8 4.6
Area m2 mm Press 22˚ 0.9 1.4 1.9 2.5 3.5 4.2 5.2
(mmAq) 45˚ 1.3 2.1 2.8 3.8 5.0 6.4 7.8
CMH 2916 3645 4374 5103 5832 6561 7290
0˚ 11.5 - 20.4 14.3 - 22.6 17.1 - 25.2 19.4 - 27.2 20.5 - 29.0 21.9 - 30.8 23.2 - 32.4
Throw
0.4 900 x 450 22˚ 9.3 - 16.2 11.5 - 18.1 13.6 - 20.1 15.6 - 21.7 16.5 - 23.2 17.6 - 24.6 18.6 - 25.7
(m)
45˚ 5.8 - 10.1 7.0 - 11.2 8.4 - 12.6 9.7 - 13.5 10.4 - 14.4 11.0 - 15.3 11.5 - 16.1
NC - 24 28 33 38 41 45
CMH 3024 3780 4536 5292 6048 6804 7560
0˚ 11.8 - 20.8 14.6 - 23.1 17.4 - 25.7 19.8 - 27.8 20.9 - 29.6 22.3 - 31.3 23.7 - 33.1
Throw
0.42 1200 x 350 22˚ 9.5 - 16.6 11.8 - 18.5 13.9 - 20.5 15.9 - 22.1 16.9 - 23.7 17.9 - 25.0 19.0 - 26.3
(m)
45˚ 5.9 - 10.4 7.2 - 11.4 8.5 - 12.8 9.9 - 13.8 10.6 - 14.7 11.2 - 15.6 11.8 - 16.5
NC 20 24 28 34 38 42 45
CMH 3240 4050 4860 5670 6480 7290 8100
0˚ 12.1 - 21.5 15.1 - 23.8 18.0 - 26.6 20.4 - 28.7 21.6 - 30.6 23.1 - 32.3 24.5 - 34.2
Throw
0.45 900 x 500 22˚ 9.8 - 17.1 12.1 - 19.1 14.3 - 21.2 16.4 - 22.8 17.4 - 24.5 18.5 - 25.8 19.6 - 27.1
(m)
45˚ 6.1 - 10.7 7.4 - 11.8 8.8 - 13.2 10.3 - 14.2 10.9 - 15.2 11.6 - 16.1 12.1 - 17.0
NC 20 24 29 34 38 42 45
CMH 3456 4320 5184 6048 6912 7776 8640
0˚ 12.5 - 22.2 15.6 - 24.6 18.5 - 27.4 21.0 - 29.6 22.3 - 31.5 23.8 - 33.3 25.3 - 35.3
Throw
0.48 1200 x 400 22˚ 10.1 - 17.6 12.5 - 19.7 14.8 - 21.8 17.0 - 23.6 10.8 - 25.3 19.1 - 26.6 20.3 - 28.0
(m)
45˚ 6.3 - 11.0 7.6 - 12.2 9.1 - 13.7 10.6 - 14.7 11.3 - 15.7 11.9 - 16.6 12.5 - 17.5
NC 21 25 30 35 39 42 47
CMH 4320 5400 6480 7560 8640 9720 10800
0˚ 13.9 - 24.7 17.3 - 27.3 20.6 - 30.5 23.4 - 32.9 24.8 - 35.0 26.4 - 37.0 28.1 - 39.2
Throw
0.6 1200 x 500 22˚ 11.3 - 19.6 13.9 - 21.9 16.4 - 24.3 18.8 - 26.2 20.0 - 28.1 21.2 - 29.6 22.5 - 31.1
(m)
45˚ 7.0 - 12.3 8.5 - 13.5 10.1 - 15.2 11.8 - 16.3 12.5 - 17.4 13.3 - 18.5 13.9 - 19.5
NC 22 26 30 35 40 43 48
CMH 5184 6480 7776 9072 10368 1164 12960
0˚ 15.2 - 26.9 18.9 - 29.8 22.5 - 33.2 25.5 - 35.8 27.0 - 38.2 28.8 - 40.4 30.6 - 42.7
Throw
0.72 1200 x 600 22˚ 12.3 - 21.4 15.2 - 23.8 17.9 - 26.5 20.5 - 28.5 21.8 - 30.6 23.2 - 32.3 24.5 - 33.9
(m)
45˚ 7.6 - 13.4 9.2 - 14.7 11.0 - 16.5 12.8 - 17.8 13.6 - 19.0 14.5 - 20.1 15.2 - 21.2
NC 2 26 31 36 41 44 49
CMH 6048 7560 9072 10584 12096 13608 15120
0˚ 16.9 - 29.2 20.8 - 32.2 24.5 - 35.8 27.7 - 38.5 29.3 - 41.0 31.2 - 43.3 33.1 - 45.8
Throw
0.84 1200 x 700 22˚ 13.9 - 23.4 16.9 - 26.0 19.8 - 28.7 22.5 - 30.9 23.8 - 33.1 25.3 - 34.8 26.7 - 36.5
(m)
45˚ 8.9 - 15.0 10.7 - 16.5 12.6 - 18.3 14.4 - 19.6 15.3 - 20.9 16.2 - 22.1 16.9 - 23.2
NC 22 27 32 36 42 45 49
CMH 6912 8640 10368 12096 13824 15552 17280
0˚ 17.9 - 31.0 22.1 - 34.2 26.0 - 38.0 29.4 - 41.0 31.1 - 43.6 33.1 - 46.0 35.1 - 48.6
Throw
0.96 1200 x 800 22˚ 14.7 - 24.8 17.9 - 27.6 21.0 - 30.5 23.9 - 32.8 25.3 - 35.1 26.8 - 37.0 28.4 - 38.8
(m)
45˚ 9.5 - 15.9 11.3 - 17.4 13.3 - 19.4 15.3 - 20.8 16.2 - 22.2 17.1 - 23.4 17.9 - 24.7
NC 23 28 32 37 42 45 50
CMH 8640 10800 12960 15120 17280 19440 21600
0˚ 19.8 - 34.2 24.4 - 37.8 28.8 - 42.1 32.5 - 45.3 34.4 - 48.2 36.6 - 50.9 38.8 - 53.8
Throw
1.2 1200 x 1000 22˚ 16.2 - 27.4 19.8 - 30.5 23.2 - 33.7 26.4 - 36.3 27.9 - 38.8 29.6 - 40.9 31.3 - 42.9
(m)
45˚ 10.4 - 17.5 12.4 - 19.2 14.6 - 21.5 16.9 - 23.0 17.9 - 24.5 18.9 - 25.9 19.8 - 27.3
NC 24 29 33 38 43 46 51
• Throw is based on terminal velocities of 0.5 m/s - 0.25 m/s respectively.
• NC value is based on a room absorption of 10 dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20.
• With G1 damper, the pressure loss is 1.136P, and add 2 for NC value.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

GV & GH page 6 of 6
SUPPLY AIR GRILLES

GA Supply Air Linear Bar Grille


■ Materials
• GA-A Extruded aluminium A6063.

■ Surface Finish
• Baked white powder coat as standard or natural anodized.

■ Features
• Model GA is made up of two sets of air foil blades.The horizontal set is in front &
the vertical set is behind.
• The horizontal set of air blades is fixed & the vertical set is adjustable.
• The grille will come in more sections for blade length that is more than 600mm.
• On-standard sizes are available.
• Approtimately 60% free area when blades are fully open.

■ Accessories
• G1 Opposed blade damper.
• G2 Volume extractor.

■ GA Construction Illustrations

■ GA Physical Dimension Unit:mm


Thickness Standard Size A B D
Model Materials Order Key
Frame Blade WxH Duct Size Wall Size Face Size
GA - A + G1 - 400 x 150
400 x 150
4.5 450 x 150 W+10 W+15 W+48
GA-A Extruded Aluminium A6063 1.0 W H
3.8 500 x 150 H+10 H+15 H+48
500 x 250 Materials
Model Accessories

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

GA page 1 of 4
SUPPLY AIR GRILLES

GA Supply Air Linear Bar Grille


GA+G1 Opposed Blade Damper
■ Materials
• G1-T SPGC galvanized steel.

■ Surface Finish
• G1-T Matt black as standard.
• The G1 opposed blade damper is gear operated & can be set at fully open, half
open & fully close.
• G1 maximum dimension is 500mm x 500mm. Damper size bigger than this will
come in sections.

■ GH & GH+G1 Physical Dimension Unit:mm


Model Depth Neck Size A Duct Size B Wall Size D Face Size
W+10 W+15 W+48
GA 52 WxH
H+10 H+15 H+48
1 W+15 W+15 W+48
GA + G1 127 WxH
A H+15 H+15 H+48

GA+G2 Volume Extractor


• G2 volume extractor helps in balancing by guiding a regulated amount of air for
supply air grilles from the main duct & enable even air distribution over the
entire surface of grille.
• Maximum angle for G2 is 35˚ - 40˚.
• Materials for G2 is 1.0mm SPGC galvanized steel & surface finish is baked
black & surface finish is baked black.

• Uneven air distribution • Even air distribution with G2

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

GA page 2 of 4
SUPPLY AIR GRILLES

GA Supply Air Linear Bar Grille


■ GA Performance Data (1)
Neck Area Neck Size Neck Vel. M/S 2 2.5 3 3.5 4 4.5 5
m2 mm Tot. Press (mmAq) 0.9 1.2 1.8 2.3 3.0 4.0 4.8
CMH 324 405 486 567 648 729 810
450 x 100 Throw Ceiling 2.3 - 4.1 2.9 - 4.5 3.6 - 5.0 3.9 - 5.6 4.2 - 6.1 4.6 - 6.6 5.0 - 7.1
0.045
300 x 150 (m) Wall 4.3 - 7.5 5.2 - 8.3 6.5 - 8.8 7.0 - 9.4 7.3 - 10.6 8.1 - 11.2 8.3 - 11.8
NC - - 21 25 27 32 37
CMH 432 540 648 756 864 972 1080
400 x 150 Throw Ceiling 2.5 - 4.6 3.4 - 5.2 4.1 - 6.1 4.7 - 6.7 5.3 - 7.4 5.7 - 8.0 6.1 - 8.3
0.06
300 x 200 (m) Wall 4.6 - 8.5 6.3 - 9.5 7.5 - 10.6 8.4 - 11.3 9.0 - 12.4 9.5 - 13.0 10.0 - 13.6
NC - - 21 26 29 32 37
CMH 540 675 810 945 1080 1215 1350
500 x 150 Throw Ceiling 2.8 - 5.3 3.9 - 6.3 4.9 - 7.1 5.5 - 7.7 5.8 - 8.3 6.3 - 8.9 6.9 - 9.5
0.075
300 x 250 (m) Wall 5.3 - 9.8 7.1 - 11.2 8.4 - 12.0 9.2 - 12.6 9.7 - 13.6 10.3 - 14.4 10.9 - 15.2
NC - - 22 26 31 33 38
CMH 648 810 972 1134 1296 1459 1620
300 x 300 Throw Ceiling 3.5 - 6.2 4.6 - 7.0 5.5 - 7.8 6.1 - 8.4 6.5 - 9.5 7.1 - 10.3 7.6 - 11.0
0.09
450 x 200 (m) Wall 6.1 - 10.5 7.6 - 11.9 9.2 - 12.7 10.0 - 13.8 10.6 - 15.0 11.5 - 16.0 12.0 - 16.9
NC - - 22 27 31 35 38
CMH 720 900 1080 1260 1440 1620 1800
500 x 200 Throw Ceiling 4.0 - 6.8 5.1 - 7.6 6.2 - 8.6 6.9 - 9.4 7.6 - 10.2 8.1 - 11.1 8.8 - 12.0
0.1
400 x 250 (m) Wall 6.8 - 11.4 8.2 - 12.5 10.0 - 14.0 10.8 - 14.9 11.8 - 15.8 12.3 - 16.9 13.0 - 18.0
NC - - 23 28 31 36 39
CMH 864 1080 1296 1512 1728 1944 2160
400 x 300 Throw Ceiling 4.3 - 7.4 5.3 - 8.4 6.5 - 9.5 7.4 - 10.4 8.1 - 11.3 8.8 - 12.2 9.3 - 12.9
0.12
600 x 200 (m) Wall 7.2 - 12.4 9.0 - 13.8 10.9 - 15.1 11.7 - 16.5 12.6 - 17.6 13.5 - 18.6 14.0 - 19.5
NC - - 24 29 33 36 39
CMH 972 1215 1458 1700 1944 2187 2430
450 x 300 Throw Ceiling 4.5 - 7.9 5.6 - 8.9 6.7 - 10.2 7.7 - 11.2 8.6 - 12.2 9.3 - 13.0 9.8 - 13.8
0.135
550 x 250 (m) Wall 7.5 - 13.2 9.4 - 14.7 11.3 - 16.0 12.5 - 17.4 13.4 - 18.5 14.2 - 19.7 14.8 - 20.7
NC - - 24 30 34 36 39
CMH 1080 1350 1620 1890 2160 2430 2700
500 x 300 Throw Ceiling 4.8 - 8.6 6.1 - 9.5 7.3 - 10.9 8.3 - 11.6 9.1 - 12.8 9.8 - 13.8 10.5 - 14.8
0.15
600 x 250 (m) Wall 7.7 - 13.8 9.5 - 15.4 11.7 - 17.0 13.0 - 18.2 13.8 - 19.3 14.6 - 20.7 15.3 - 21.6
NC - - 25 30 34 37 39
CMH 1188 1485 1782 2079 2376 2673 2970
550 x 300 Throw Ceiling 5.1 - 9.1 6.4 - 10.1 7.7 - 11.4 8.7 - 12.4 9.7 - 13.5 10.4 - 14.6 11.1 - 15.7
0.165
650 x 250 (m) Wall 5.2 - 14.6 10.2 - 16.1 12.4 - 17.6 13.5 - 19.0 14.6 - 20.4 15.1 - 21.5 16.2 - 22.8
NC - 21 25 31 35 37 39
• Throw is based on terminal velocities of 0.5 m/s - 0.25 m/s respectively.
• NC value is based on a room absorption of 10 dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20.
• With G1 damper, the pressure loss is 1.136P, and add 2 for NC value.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

GA page 3 of 4
SUPPLY AIR GRILLES

GA Supply Air Linear Bar Grille


■ GA Performance Data (2)
Neck Area Neck Size Vel. M/S 2 2.5 3 3.5 4 4.5 5
m2 mm Tot. Press (mmAq) 0.9 1.2 1.8 2.3 3.0 4.0 4.8
CMH 1296 1620 1944 2268 2592 2915 3240
600 x 300 Throw Ceiling 5.3 - 9.5 6.5 - 10.8 7.9 - 12.1 9.0 - 13.2 10.2 - 14.3 11.0 - 15.6 12.0 - 16.9
0.18
700 x 250 (m) Wall 8.5 - 15.2 10.7 - 16.9 12.7 - 18.3 14.2 - 19.8 15.2 - 21.3 16.2 - 22.5 16.9 - 23.8
NC - 21 25 31 35 38 40
CMH 1405 1755 2105 2457 2808 3160 3510
650 x 300 Throw Ceiling 5.8 - 10.1 7.3 - 11.4 8.7 - 12.6 9.7 - 13.9 10.8 - 15.1 11.7 - 16.4 12.6 - 17.6
0.195
550 x 350 (m) Wall 9.1 - 15.8 11.2 - 17.2 13.2 - 19.0 14.7 - 20.7 15.8 - 22.1 16.8 - 23.5 17.7 - 24.9
NC - 21 25 31 35 38 40
CMH 1512 1890 5568 2646 3024 3402 3780
700 x 300 Throw Ceiling 6.1 - 10.6 7.8 - 11.8 9.3 - 13.1 10.3 - 14.5 11.3 - 15.9 12.3 - 17.2 13.3 - 18.5
0.21
1000 x 200 (m) Wall 9.6 - 16.5 11.6 - 18.1 14.0 - 19.7 15.3 - 21.5 16.6 - 23.3 17.5 - 24.5 18.7 - 26.0
NC - 21 26 31 35 38 41
CMH 1620 2025 2430 2835 3240 3645 4050
750 x 300 Throw Ceiling 6.5 - 11.1 8.3 - 12.5 9.6 - 13.8 11.0 - 15.5 12.2 - 16.9 13.3 - 18.2 14.2 - 19.8
0.225
900 x 250 (m) Wall 10.0 - 17.1 12.1 - 18.6 14.5 - 20.5 16.0 - 22.4 17.2 - 24.0 18.0 - 25.6 19.3 - 26.9
NC - 22 26 31 36 39 41
CMH 1728 2160 2592 3024 3456 3888 4320
Throw Ceiling 6.7 - 11.4 8.5 - 13.0 10.2 - 14.3 11.4 - 16.0 12.5 - 17.7 13.6 - 19.2 14.7 - 20.4
0.24 850 x 300
(m) Wall 10.2 - 17.5 12.5 - 19.5 14.8 - 21.1 16.6 - 23.1 17.6 - 24.7 18.6 - 26.3 19.9 - 27.7
NC - 22 26 32 36 39 41
CMH 1836 2295 2754 3213 3672 4130 4590
Throw Ceiling 6.9 - 11.8 8.6 - 13.4 10.4 - 15.0 11.6 - 16.6 12.9 - 18.2 14.3 - 20.0 15.1 - 21.1
0.255 850 x 300
(m) Wall 10.4 - 18.0 12.9 - 20.0 15.2 - 21.9 17.3 - 23.8 18.2 - 25.5 19.3 - 27.0 20.5 - 28.5
NC - 22 27 32 36 39 41
CMH 1944 2430 2915 3402 3888 4374 4860
Throw Ceiling 7.0 - 12.3 8.9 - 14.0 10.7 - 15.7 21.1 - 17.4 13.3 - 19.1 14.7 - 20.6 15.5 - 21.7
0.27 900 x 300
(m) Wall 10.5 - 18.4 13.0 - 20.6 15.6 - 22.6 17.5 - 24.5 18.7 - 26.5 19.6 - 27.9 21.0 - 29.3
NC - 22 27 32 36 39 42
CMH 2160 2700 3240 3780 4320 4860 5400
Throw Ceiling 7.3 - 12.9 9.3 - 14.8 11.3 - 16.9 13.0 - 18.4 14.2 - 20.2 15.5 - 21.7 16.6 - 23.0
0.3 1000 x 300
(m) Wall 11.0 - 19.5 13.6 - 21.7 16.4 - 24.0 18.6 - 26.0 19.9 - 27.2 21.0 - 29.5 22.5 - 31.1
NC - 23 28 32 37 40 43
CMH 2304 2880 3456 4032 4608 5184 5760
Throw Ceiling 7.5 - 13.2 9.5 - 15.2 11.5 - 17.5 13.3 - 19.4 14.4 - 21.4 15.8 - 22.1 17.0 - 23.7
0.32 800 x 400
(m) Wall 11.4 - 19.9 14.1 - 22.2 16.7 - 24.7 18.9 - 26.9 20.2 - 28.7 21.7 - 30.5 23.0 - 32.0
NC - 23 28 32 37 40 43
• Throw is based on terminal velocities of 0.5 m/s - 0.25 m/s respectively.
• NC value is based on a room absorption of 10 dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20.
• With G1 damper, the pressure loss is 1.136P, and add 2 for NC value.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

GA page 4 of 4
SUPPLY AIR GRILLES

RA/RAC Bar Grille


Linear Bar Grille (RA)
■ Materials
• RA-A Extruded aluminium A6063.

■ Features
• The bar grille air blades are fixed & not adjustable. Maximum single length is
2700m. Above this length, the grille will come in multiple section.
• The neck sizes (w) are proportional to the number of linear bar blades.
Please refer to the following table.
• Two different types of linear bar face deflection angle are available.
• The bar grilles that come with plenum boxes are known as RAB.
• Approximately 65% free area.

■ Surface Finish
• Baked white powder coat or natural anodized as standard.

Curve Type Linear Bar Grille (RAC)


• The curved structure and aesthetic appearance of RAC make it perfect to be
installed at the round column or curved wall.

■ RA Construction Illustrations

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

RA/RAC page 1 of 7
SUPPLY AIR GRILLES

RA/RAC Bar Grille


■ RAC Construction Illustrations

■ Bar Grille Vs Width Unit:mm


No.of Blade 2 3 4 5 6 7 8 10 12 14 16 18 20
Neck Width 45 60 75 90 105 120 135 165 195 225 255 285 315

■ RA/RAC Physical Dimension Unit:mm


Thickness LxW A B D
Model Materials Order Key
Frame Blade Neck Size Duct Size Wall Size Face Size
RA - A + 100 x 3 - 1
RA-A L: To suit
design Length L+10 L+15 L+29
Extruded Aluminium A6063 1.0 4.5 W H
W: Tosuit W+10 W+15 W+29
RAC No. of Blade Materials
Model Accessories

■ RA-A Linear Bar Grille


• 90˚ mitred corner sections for linear bar grilles are available.
• Joining strips are available for continuous installation of the mitred corner
section & the linear bar grille.

■ RA-A Linear Bar Grille


• Maximum length of a single linear bar grille is 2700mm. Above 2700mm,
the grille will come in multiple section.
• Joining strips are available for multiple section of linear bar grille.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

RA/RAC page 2 of 7
SUPPLY AIR GRILLES

RA/RAC Bar Grille


■ RA-A Linear Bar Grille

■ RA-A Bar Deflection Angle


• Two different linear bar face deflection angles are available.
• Deflection for RA/RAC -1:0˚
RA/RAC -2:15˚

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

RA/RAC page 3 of 7
SUPPLY AIR GRILLES

RA/RAC Bar Grille


■ Model RAB : RA Linear Bar Grille c/w Plenum Box.
• Plenum box is constructed of 0.5mm SPGC galvanized steel.
• Two types of insulation are available.
• External insulation: 25mm X 24kg/m2 fiberglass wrapped with fiber-reinforced
aluminium foil.(Optional)
• Internal insulation: 5mm thick PE foam.

■ RA/RAC Physcal Dimension Unit:mm


L - Length of Plenum Box W Width of Plenum Box H Height of Plenum Box S Inlet Size

Face length of linear diffuser Neck width of linear diffuser W + 20 230 100ø~300ø oval shape

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

RA/RAC page 4 of 7
SUPPLY AIR GRILLES

RA/RAC Bar Grille


■ RA/RAC -1 (0˚) - Supply Performance Data
Neck Width Neck Vel.(m/s) 1.0 1.5 2.0 2.5 3.0 3.5
(mm) Tot. Press (mmAq) 0.4 0.6 0.9 1.6 2.2 3.0
CMH/M 162 243 324 405 486 567
Throw Ceiling 0.3 - 0.3 1.2 - 1.2 2.1 - 2.1 2.7 - 3.0 3.3 - 3.6 4.2 - 4.8
45
(m) Wall 1.5 - 2.1 2.4 - 3.6 3.3 - 4.8 4.2 - 6.0 5.1 - 6.9 5.7 - 7.8
NC - - 21 26 31 35
CMH/M 216 324 432 540 648 756
Throw Ceiling 0.4 - 0.4 1.7 - 1.7 2.8 - 2.9 3.5 - 3.8 4.4 - 4.7 5.1 - 5.4
60
(m) Wall 1.9 - 2.6 2.8 - 4.0 4.0 - 5.3 4.9 - 6.5 5.6 - 7.4 6.6 - 8.6
NC - - 20 25 30 34
CMH/M 270 405 540 675 810 945
Throw Ceiling 0.8 - 0.8 2.3 - 2.3 3.4 - 3.5 4.3 - 4.6 5.3 - 5.6 6.1 - 6.6
75
(m) Wall 2.1 - 3.0 3.4 - 4.6 4.6 - 5.9 5.6 - 7.4 6.6 - 8.2 7.6 - 9.4
NC - - 20 25 30 34
CMH/M 324 486 648 810 972 1134
Throw Ceiling 0.9 - 0.9 2.7 - 2.7 3.9 - 3.9 4.8 - 5.1 6.0 - 6.3 6.9 - 7.2
90
(m) Wall 2.4 - 3.3 3.9 - 5.1 5.1 - 6.3 6.0 - 7.5 7.5 - 9.0 8.4 - 10.2
NC - - 21 26 31 35
CMH/M 378 567 756 945 1134 1323
Throw Ceiling 1.1 - 1.1 3.0 - 3.0 4.2 - 4.2 5.2 - 5.2 6.5 - 6.8 7.2 - 7.3
105
(m) Wall 2.8 - 3.7 4.2 - 5.4 5.5 - 6.8 6.5 - 8.0 8.0 - 9.5 8.9 - 10.7
NC - - 21 26 31 35
CMH/M 432 648 864 1080 1296 1512
Throw Ceiling 1.3 - 1.3 3.0 - 3.0 4.4 - 4.4 5.5 - 5.5 6.8 - 6.8 7.4 - 7.4
120
(m) Wall 3.2 - 4.1 4.4 - 5.6 5.9 - 7.1 6.8 - 8.3 8.3 - 9.8 9.4 - 11.2
NC - - 21 26 31 35
CMH/M 486 729 972 1215 1458 1701
Throw Ceiling 1.5 - 1.5 3.0 - 3.0 4.5 - 4.5 5.5 - 5.5 6.9 - 6.9 7.5 - 7.5
135
(m) Wall 3.6 - 4.5 4.8 - 6.0 6.0 - 7.2 7.2 - 8.7 8.7 - 10.2 9.9 - 11.7
NC - - 22 27 32 36
CMH/M 594 891 1188 1485 1782 2079
Throw Ceiling 1.8 - 1.8 3.3 - 3.3 4.8 - 4.8 6.1 - 6.1 7.5 - 7.7 8.2 - 8.2
165
(m) Wall 4.2 - 5.1 5.4 - 6.6 6.6 - 7.8 8.0 - 9.3 9.3 - 10.8 10.5 - 12.3
NC - - 22 27 32 36
CMH/M 702 1053 1404 1755 2106 2457
Throw Ceiling 2.0 - 2.0 3.5 - 3.5 5.0 - 5.0 6.3 - 6.3 7.8 - 7.9 8.5 - 8.5
195
(m) Wall 4.8 - 5.8 5.9 - 7.1 7.0 - 8.1 8.6 - 9.8 9.8 - 11.2 11.1 - 12.9
NC - - 23 28 33 37
CMH/M 810 1215 1620 2025 2430 2835
Throw Ceiling 2.3 - 2.3 3.8 - 3.8 5.2 - 5.2 6.6 - 6.6 8.0 - 8.0 8.8 - 8.8
225
(m) Wall 5.5 - 6.5 6.4 - 7.6 7.4 - 8.4 9.2 - 10.3 10.3 - 11.7 11.8 - 13.6
NC - - 23 28 33 37
CMH/M 918 1377 1836 2295 2754 3213
Throw Ceiling 2.6 - 2.6 4.0 - 4.0 5.4 - 5.4 6.9 - 6.9 8.2 - 8.2 9.0 - 9.0
255
(m) Wall 6.2 - 7.4 7.0 - 8.1 7.9 - 8.8 9.8 - 10.8 10.8 - 12.1 12.5 - 14.2
NC - - 24 29 34 38
CMH/M 1026 1539 2052 2565 3078 3591
Throw Ceiling 2.8 - 2.8 4.2 - 4.2 5.6 - 5.6 7.2 - 7.2 8.3 - 8.3 9.2 - 9.2
285
(m) Wall 7.1 - -8.3 7.6 - 8.7 8.3 - 9.1 10.5 - 11.3 11.3 - 12.6 13.3 - 15.0
NC - - 24 29 34 38
CMH/M 1134 1701 2268 2835 3402 3969
Throw Ceiling 3.1 - 3.1 4.5 - 4.5 5.9 - 5.9 7.5 - 7.5 8.5 - 8.5 9.5 - 9.5
315
(m) Wall 8.3 - 9.4 8.3 - 9.3 8.8 - 9.5 11.2 - 11.9 11.9 - 13.1 14.1 - 15.7
NC - 20 25 30 35 39
• Above performance data is also applicable for RAC with one meter curve lenght. • For return air application, Negative SP=0.75 x Tot. Press. NC=above plus 5. Length (M) 0.5 01 1.5 2
• Throw values are based on an entire section one meter long. • Corrected values for throw and NC value as the length changes. NC -2 0 +2 +3
• Throw is based on terminal velocities of 0.5 m/s - 0.25 m/s respectively.
Terminal Vel. 0.5m/s 0.8 1 1.1 1.2
• NC value is based on a room absorption of 10 dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20. Terminal Vel. 0.25m/s 0.9 1 1.15 1.2
Eg: When length is 2m,Throw: use a multiple of 1.2
NC: NC plus 3

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

RA/RAC page 5 of 7
SUPPLY AIR GRILLES

RA/RAC Bar Grille


■ RA/RAC -2 (15˚) - Supply Performance Data
Neck Width Neck Vel. (m/s) 1.0 1.5 2.0 2.5 3.0 3.5
(mm) Tot. Press (mmAq) 0.4 0.6 0.9 1.6 2.2 3.0
CMH/M 162 243 324 405 486 567
Throw Ceiling 0.3 - 0.3 1.2 - 1.2 2.1 - 2.1 2.7 - 3.0 3.3 - 3.6 4.2 - 4.8
45
(m) Wall 1.5 - 2.1 2.4 - 3.6 3.3 - 4.8 4.2 - 6.0 5.1 - 6.9 5.4 - 7.5
NC - - 26 31 36 40
CMH/M 216 324 432 540 648 756
Throw Ceiling 0.4 - 0.4 1.6 - 1.6 2.6 - 2.8 3.4 - 3.7 4.5 - 4.8 5.2 - 5.7
60
(m) Wall 1.8 - 2.5 2.8 - 4.0 3.7 - 5.2 5.0 - 6.5 5.9 - 7.7 6.7 - 8.5
NC - - 25 30 35 39
CMH/M 270 405 540 675 810 945
Throw Ceiling 0.6 - 0.6 2.0 - 2.0 3.4 - 3.4 4.0 - 4.3 5.2 - 5.5 6.1 - 6.4
75
(m) Wall 2.0 - 2.9 3.2 - 4.4 4.4 - 5.8 5.3 - 6.9 6.4 - 8.1 7.5 - 9.3
NC - - 25 30 35 39
CMH/M 324 486 648 810 972 1134
Throw Ceiling 0.9 - 0.9 2.4 - 2.7 3.9 - 3.9 4.8 - 4.8 5.7 - 6.0 6.6 - 6.9
90
(m) Wall 2.4 - 3.3 3.6 - 4.8 5.1 - 6.3 5.7 - 7.2 7.2 - 8.7 8.1 - 9.9
NC - - 26 31 36 40
CMH/M 378 567 756 945 1134 1323
Throw Ceiling 1.1 - 1.1 2.6 - 2.7 4.2 - 4.2 5.0 - 5.1 6.2 - 6.5 7.1 - 7.2
105
(m) Wall 2.8 - 3.7 4.0 - 5.2 5.5 - 6.8 6.2 - 7.7 7.5 - 9.2 8.6 - 10.5
NC - - 26 31 36 40
CMH/M 432 648 864 1080 1296 1512
Throw Ceiling 1.3 - 1.3 2.8 - 2.8 4.3 - 4.3 5.3 - 5.3 6.6 - 6.7 7.4 - 7.4
120
(m) Wall 3.2 - 4.0 4.4 - 5.6 5.8 - 7.1 6.6 - 8.1 7.7 - 9.5 8.8 - 10.7
NC - - 26 31 36 40
CMH/M 486 729 972 1215 1458 1701
Throw Ceiling 1.5 - 1.5 3.0 - 3.0 4.5 - 4.5 5.4 - 5.4 6.9 - 6.9 7.5 - 7.5
135
(m) Wall 3.3 - 4.2 4.8 - 6.0 6.0 - 7.2 7.2 - 8.4 8.1 - 9.6 9.0 - 10.8
NC - 20 27 32 37 41
CMH/M 594 891 1188 1485 1782 2079
Throw Ceiling 1.8 - 1.8 3.3 - 3.3 4.8 - 4.8 6.0 - 6.0 7.5 - 7.7 8.1 - 8.1
165
(m) Wall 3.6 - 4.5 5.4 - 6.6 6.6 - 7.8 7.9 - 9.0 8.5 - 10.1 9.6 - 11.4
NC - 20 27 32 37 41
CMH/M 702 1053 1404 1755 2106 2457
Throw Ceiling 2.0 - 2.0 3.5 - 3.5 5.0 - 5.0 6.3 - 6.3 7.8 - 7.9 8.5 - 8.5
195
(m) Wall 3.9 - 4.8 6.0 - 7.1 7.0 - 8.2 8.5 - 9.5 8.8 - 10.4 10.0 - 11.7
NC - 22 28 33 38 42
CMH/M 810 1215 1620 2025 2430 2835
Throw Ceiling 2.3 - 2.3 3.8 - 3.8 5.2 - 5.2 6.6 - 6.6 8.0 - 8.0 8.8 - 8.8
225
(m) Wall 4.3 - 5.2 6.7 - 7.7 7.4 - 8.6 9.2 - 9.9 9.2 - 9.9 10.4 - 12.1
NC - 22 28 33 38 42
CMH/M 918 1377 1836 2295 2754 3213
Throw Ceiling 2.6 - 2.6 4.0 - 4.0 5.4 - 5.4 6.9 - 6.9 8.2 - 8.2 9.0 - 9.0
255
(m) Wall 4.7 - 5.5 7.4 - 8.3 7.9 - 9.0 10.0 - 10.4 9.6 - 11.0 10.8 - 12.5
NC - 23 29 34 39 43
CMH/M 1026 1539 2052 2565 3078 3591
Throw Ceiling 2.8 - 2.8 4.2 - 4.2 5.6 - 5.6 7.2 - 7.2 8.3 - 8.3 9.2- 9.2
285
(m) Wall 5.1 - 5.9 8.2 - 9.0 8.3 - 9.5 10.7 - 10.9 9.9 - 11.4 11.2 - 12.8
NC - 23 29 34 39 43
CMH/M 1134 1701 2268 2835 3402 3969
Throw Ceiling 3.1 - 3.1 4.5 - 4.5 5.9 - 5.9 7.5 - 7.5 8.5 - 8.5 9.5 - 9.5
315
(m) Wall 5.5 - 6.3 9.1 - 9.7 8.8 - 10.0 11.6 - 11.5 10.3 - 11.7 11.7 - 13.2
NC - 25 30 35 40 44
• Above performance data is also applicable for RAC with one meter curve lenght. • For return air application, Negative SP=0.75 x Tot. Press. NC=above plus 5. NC -2 0 +2 +3
• Throw values are based on an entire section one meter long. • Corrected values for throw and NC value as the length changes. Terminal Vel. 0.5m/s 0.8 1 1.1 1.2
• Throw is based on terminal velocities of 0.5 m/s - 0.25 m/s respectively.
Terminal Vel. 0.25m/s 0.9 1 1.15 1.2
• NC value is based on a room absorption of 10 dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20. Eg: When length is 2m,Throw: use a multiple of 1.2
NC: NC plus 3

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

RA/RAC page 6 of 7
SUPPLY AIR GRILLES

RA/RAC Bar Grille


■ RA/RAC - Return Performance Data
Neck Vel. (m/s) 1.0 1.5 2.0 2.5 3.0 3.5
Neck Width
Vel. Press (mmAq) 0.25 0.55 1.0 1.55 2.2 3.0
(mm)
Neg. SP. (mmAq) 0.3 0.5 0.7 1.2 1.7 2.3
CMH/M 162 243 324 405 486 567
45
NC - - 24 29 34 38
CMH/M 216 324 432 540 648 756
60
NC - - 23 28 33 37
CMH/M 270 405 540 675 810 945
75
NC - 23 28 33 37
CMH/M 324 486 648 810 972 1134
90
NC - - 24 29 34 38
CMH/M 378 567 756 945 1134 1323
105
NC - - 24 29 34 38
CMH/M 432 648 864 1080 1296 1512
120
NC - - 24 29 34 38
CMH/M 486 729 972 1215 1458 1701
135
NC - - 25 30 35 39
CMH/M 594 891 1188 1485 1782 2079
165
NC - - 25 30 35 39
CMH/M 702 1053 1404 1755 2106 2457
195
NC - 21 26 31 36 40
CMH/M 810 1215 1620 2025 2430 2835
225
NC - 21 26 31 36 40
CMH/M 918 1377 1836 2295 2754 3213
255
NC - 22 27 32 37 41
CMH/M 1026 1539 2052 2565 3078 3591
285
NC - 22 27 32 37 41
CMH/M 1134 1701 2268 2835 3402 3969
315
NC - 22 28 33 38 42
• Above performance data is also applicable for RAC with one meter curve lenght. Length (M) 0.5 1 1.5 2
• Throw values are based on an entire section one meter long. NC Correction -2 0 +2 +3
• Throw is based on terminal velocities of 0.5 m/s - 0.25 m/s respectively.
• NC value is based on a room absorption of 10 dB, re 10-12 watts.
• Dash (-) in space indicates NC value less than 20.
• Corrected values for throw and NC value as the length changes.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

RA/RAC page 7 of 7
SUPPLY AIR GRILLES ACCESSORIES

G1- Opposed Blade Damper


■ Materials
• G1-T Frame 0.6mm SPGC galvanized steel. Blade 0.5mm SPGC galvanized steel.

■ Surface Finish
• G1-T Matt black as standard.
• Maximum dimension is 500mm x 500mm. Damper size bigger than this will
come in sections.
• Gear operated, can be set at fully open, half open & fully close.

G2 Volume Extractor
■ Materials
• G2-T 1.0mm SPGC galvanized steel.
• G2-S 0.5mm stainless steel SUS. 304.

■ Surface Finish
• G2-T Matt black as standard.
• G2-S Stainless steel original colour.
• Maximum dimension is 800mm x 500mm.
• Suitable for model GV & GH wall grille as guide vanes.
• Maximum angle of opening 35˚ - 40˚.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

SUPPLY AIR GRILLES ACCESSORIES page 1 of 2


SUPPLY AIR GRILLES ACCESSORIES

Recommended Noise Criteria for Rooms (3)


Range of NC Range of NC
Type of Area Type of Area
Criteria Curves Criteria Curves
RESIDENCES CHURCHES AND SCHOOLS
Private homes (rural and suburban) 20-30 Sanctuaries 20-30
Private homes (urban ) 25-35 Libraries 30-40
Apartment houses, 2-and 3-family units 30-40 Schools and classrooms 30-40
Laboratories 35-45
HOTELS Recreation halls 35-50
Individual rooms or suites 30-40 Corridors and halls 35-50
Ballrooms, banquet rooms 30-40 Kitchens 40-50
Halls and corridors, lobbies 35-45
Garages 40-50
Kitchens and laundries 40-50 PUBLIC BUILDINGS
Public libraries, museums, court rooms 30-40
HOSPITALS AND CLINICS Post office, general banking areas, lobbies 35-45
Private rooms 25-35 Washrooms and toilets 40-50
Operating rooms, wards 30-40
Laboratories, halls and corridors
Lobbies and waiting rooms 35-45 RESTAURANTS, CAFETERIAS, LOUNGES
Washrooms and toilets 40-50 Restaurants 35-45
Cocktail lounges 35-50
OFFICES Night clubs 35-45
Board room 20-30 Cafeterias 40-50
Conference rooms 25-35
Executive office 30-40
Supervisor office, reception room 30-45 STORES, RETAIL
General open offices, drafting rooms 35-45 Clothing stores
Halls and corridors 35-50 Department stores (upper floors) 35-45
Tabulation and computation 40-60 Department stores (main floor) 40-50
40-50 Small retail stores
Supermarkets 40-50
AUDITORIUMS AND MUSIC HALLS
Concert and opera halls 15-25
Studios for sound reproduction 25-30 SPORTS ACTIVITIES, INDOOR
Legitimate theaters, multi-purpose halls Coliseums 30-40
Movie theaters, TV audience studios Bowling alleys, gymnasiums 35-45
Semi-outdoor amphitheaters 30-35 Swimming pools 35-45
Lecture halls, planetarium
Lobbies 35-45
TRANSPORTATION (RAIL, BUS, PLANE)
Ticket sales offices 30-40
Lounges and waiting rooms 35-50

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

SUPPLY AIR GRILLES ACCESSORIES page 2 of 2

Das könnte Ihnen auch gefallen