Beruflich Dokumente
Kultur Dokumente
electrical resistance
resistance to salt spray
surface preparation to ISO 8501-1
requirements
Technical Data
Zinc Tape has a 0.08mm thick
layer of 99.99% pure zinc
backed by a 0.025mm layer of
conductive adhesive.
Conductance is achieved by the
inclusion of zinc powder within
Examples of areas where galvanic or crevice corrosion occurs the adhesive as well as the
nature of the adhesive itself. A
The joint between protective film on the back of the
hinges and the door adhesive is removed as the Zinc
body in cars is Tape is applied.
often a place where 50m rolls of tapes are available
corrosion can be an in 10, 15, 20, 25, 30, 35, 40, 50,
issue. 70, 80, 90, 100,150,200 and
300mm width. In Australia 20,
100 and 300mm widths are
stocked.
Zinc Tape can be used at
continuous temperatures of
80°C.
Where used between metals
causing a galvanic couple the
zinc must be placed against the
most noble material.
The Zinc Tape Washers are
made from the same material as
the Zinc Tape and are made in
accordance with the same
standard. However the washers
are pre-cut and can be simply
peeled from the backing sheet
and applied to the more noble
element.