Beruflich Dokumente
Kultur Dokumente
Version :- 1
Site Location :- ROURKELA
We are pleased to award contract on your esteemed organization, details of which are furnished below:
Please acknowledge receipt of this order within 48 hours failing which it will be deemed to be accepted & arrange to
execute the job as per details given below.
Invoices against job/supplies which have been completed shall be submitted at centralized bill collection centre of
respective location along with HR/IR clearances & material reconciliation statement (as applicable) within maximum of
3 months.
10% of invoices amount will be deducted for invoice for invoices submitted beyond 3 months but within 6 months.
20% of invoices amount will be deducted for invoice submitted beyond 6 months but within 9 months.
"Services bills falling under the purview of statutory compliance viz. PF,ESI,Wages,Leave,Bonus,etc must be
routed through contractor cell for certification prior to submission at Bill Desk(BST).Bills without the above
certification will not received at Bill Desk".
Item No. : - 00010 Description:- Intake Well & PumpHouse at Rourkela BHEL
SAC Code : -9983
Delivery Date : 31.03.2020
----------------------------------------------------------------------------
Price Schedule
Outline No. : - A 01 Brief Description : - Excavation Work
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 E/W in Exc. by Mech means upto 1.50 193.04 Cubic mete125.00 24130.00
M
Item Long Text :Earth work in excavation
by mechanical means in dense sand
over areasand stacking with in a lead of
50 M,with ramming, trimming and
dressingof sides etc., (authorised
working space, benching and side
slopes forthe excavation will be
measured and paid under this item).
Dewateringfor the trench has been
considered separately(a) upto 1.5 Mtr
depth from EGL
20 E/W in Exc. by Mech means 1.50 - 3.0 96.52 Cubic mete150.00 14478.00
M
Item Long Text :Earth work in excavation
by mechanical means in dense sand
over areasand stacking with in a lead of
50 M, with ramming, trimming and
dressingof sides etc., (authorised
working space, benching and side
slopes forthe excavation will be
measured and paid under this item).
Dewateringfor the trench has been
considered separately(b),,1.5 mtr to
3.00 mtr
4.50 Mtr
Price Schedule
Outline No. : - A 02 Brief Description : - Concrete Work
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
No
70 Supp & grouting M-20 of pocket holes 0.10 Cubic mete45,000.00 4500.00
Item Long Text :Supplying & grouting
(M20 grade) of pocket holes, pipe
sleeves and underbase plate of structural
steel work/ machinery/ pipe
supportingstructures including
roughening of surface, cleaning,
ramming, curingetc. all complete with
CM 1:2 (1 cement : 2 coarse sand) and
10 mm downgraded stonechips using
non shrink admixture. (Cost of all
material andcleaning the pocket by
compressed air shall be in the scope of
thecontractor).
Price Schedule
Outline No. : - A 03 Brief Description : - Shuttering Work
30 Prov. Erec. Formwork in Beam & slab 394.05 Square me750.00 295537.50
Item Long Text :Providing, fabricating
and erecting form work at all levels and
placesand profiles wherever needed/
specified as per drawing
includingstriking with 12mm marine
resistant waterproof ply/ Smooth
10 Prov. Brick masonary work above FGL 50.50 Cubic mete5,000.00 252500.00
Item Long Text :Providing common burnt
clay brick masonry work.
Immersing the bricks inwater before use
in all necessary projections, cutting,
circularmoulding, corbelling etc.
including cost, conveyance, taxes &
royalties,loading and unloading of all
materials & cost of all
labours,scaffolding, watering & curing,
Price Schedule
20 Supp & laying 15mm thk in CM (1:6) 340.00 Square me160.00 54400.00
Item Long Text :Supplying and laying
plaster with cement sand mortar at all
heights,walls surface, beams,
staircases lintel soffits, chajjas,
projectionsnarrow bands and widths etc
including chipping of concrete
surfacesraking joints, scaffolding
cleaning and curing, all as per
drawings,specification and direction of
the Engineer, all materials, tools
plantand labour complete in all
respect(b),,15 mm thick inside plaster in
CM (1:6)
30 Supp & laying 6mm thk in CM (1:4) 190.00 Square me140.00 26600.00
Item Long Text :Supplying and laying
plaster with cement sand mortar at all
heights,walls surface, beams,
staircases lintel soffits, chajjas,
projectionsnarrow bands and widths etc
including chipping of concrete
surfacesraking joints, scaffolding
cleaning and curing, all as per
drawings,specification and direction of
the Engineer, all materials, tools
plantand labour complete in all
respect(c),,6 mm thick ceiling plaster for
chajja in CM (1:4)
Price Schedule
No
10 Supp & laying 25mm thk Cement 116.94 Square me88.00 10290.72
plaster
Item Long Text :Supplying and laying
25mm thick grey cement patent
concrete(granolithic) floor finish with
neat cement punning in panels in
floors.The concrete shall be in ratio
1:2:4. The cost of glass strips to
beincluded in this item. The quantity of
300 mm skirting included in thisitem
Price Schedule
Outline No. : - A 07 Brief Description : - Painting Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Prov & apply acrylic emulsion paint 378.00 Square me150.00 56700.00
Item Long Text :Supplying and applying
two coats with Exterior Quality Acrylic
emulsionweather coat paint of approved
brand and shade over a coat of primer
asper drawings and as specified at all
heights and depths above and
belowplinth level including scaffolding,
all materials, tools, plant andlabour
complete in all respect. (For external
surfaces of buildings andother
structures)
30 Prov. & apply 2 coat enamel paint 70.00 Square me180.00 12600.00
Item Long Text :Supplying and applying
two coats with synthetic enamel paint of
approvedbrand and shade over a coat of
primer on new wooden/ steel surface
asper drawings and as specified at all
heights and depths above and
belowplinth level including scaffolding,
all materials, tools, plant andlabour
complete in all respect.
Price Schedule
Outline No. : - A 08 Brief Description : - Water Proofing Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Prov. & application of Injection groutin 240.00 each 750.00 180000.00
Item Long Text :Providing and
application of injection grouting to the
concrete surfacesby providing &
grouting with deep penetrating polymer/
polyurethanegrouting material (either
single or multiple) of approved brand
andmanufacture, including
necessarysurface preparation, drilling of
holesfor grouting, fixing of nozzles and
grouting around the nozzles The
rateshall include for curing and finishing
and the same to be tested for
anyleakage by approved method. The
application procedures, grouting of
thejoints, mixing proportions of the
materials etc. all as permanufacturer's
recommendations, with all lead & lift for
all materials &labour and as directed, at
all levels and locations.
20 Prov. & fixing PVC water stopper 180.00 Meter 480.00 86400.00
Item Long Text :Providing and fixing
PVC water stopper (white) of size
230X8mm (serratedwith central bulb) at
construction joints including all
materials,tools, tackles, manpower etc.
complete
Price Schedule
Outline No. : - A 09 Brief Description : - Reinforcement Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
Price Schedule
Outline No. : - A 10 Brief Description : - Structural Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
No
10 Fabr inserts and other fixtures 150.00 Kilogram 20.00 3000.00
Price Schedule
Outline No. : - A 11 Brief Description : - Doors and Windows
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
20 Prov. & fixing MS Door along with frame 2.52 Square me4,575.00 11529.00
Item Long Text :Providing and fixing MS
Door along with frame, holdfast
arrangements (06nos), Hinges (06 nos),
sliding bolt etc. The doors frames shall
befabricated from 1.6 mm thick MS
sheets and shall meet the
generalrequirements of IS:4351.All steel
doors shall consist of double plateflush
door shutters. The door shutter shall be
35 mm (min.) thick withtwo outer sheets
of 1.2 mm rigidly connected with
continuous vertical1.0 mm stiffeners at
the rate of 150 mm centre to centre.
Side, top andbottom edges of shutters
shall be reinforced by continuous pressed
steelchannel with minimum 1.2 mm. The
door shall be sound deadened by
fillingthe inside void with mineral wool.
Doors shall be complete with allhardware
and fixtures like door closer, tower bolts,
handles, stoppers,aldrops, locks etc. The
cost of grouting the holes in brickwork
with PCC(1:2:4) shall also be included in
this cost.
Price Schedule
Outline No. : - A 12 Brief Description : - Cofferdam Works including de-watering
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
impervious semimperviousmaterials on
both side of B.C. soil (in gunny bags if
required)including ramming, compacting
to satifaction of Engineer-in-charge, tillthe
completion of work including dismantling
coffer dam after completionof works and
disposing off material as directed by
theEngineer-in-charge.
No
6.00 Mtr
Price Schedule
Outline No. : - A 02 Brief Description : - Concrete Work
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Prov. & laying PCC (1:3:6) M-10 13.41 Cubic mete3,500.00 46935.00
Item Long Text :Providing, laying and
compacting plain cement concrete of
followinggrades as defined by IS:456
with graded stone aggregates in
allfoundations, bed blocks, chambers,
trenches, floors, roofs,
pavements,screedings, encasing etc at
all depthsbelow finished ground level
torequired levels, slopes etc including
the cost of shuttering all as perdrawings,
specifications and directions of the
Engineer/ Consultant, allmaterials, tools,
plant and labour complete.(a),,M10
grade (1:3:6)-100mm thick with 20mm
down graded stone aggregate
20 Prov. & laying RCC M-25 in RCC slab 48.00 Cubic mete4,000.00 192000.00
Item Long Text :Providing, transporting
and laying design-mix Reinforced
Cement Concreteof M25 grade specified
below using cement of approved grade
fromapproved manufacturer,sand, 20mm
and down size coarse
aggregates,necessary admixtures
approved by Consultants (if required),
includingall leads and lifts,
No
30 Prov. & laying RCC M-30 in Foundation 75.78 Cubic mete4,000.00 303120.00
Item Long Text :Providing, transporting
and laying design-mix Reinforced
Cement Concreteof M30 grade for water
retaining structures using cement from
approvedmanufacturer, sand, 20mm and
down size coarse aggregates,
necessaryadmixtures approved by
Consultants (if required), including all
leadsand lifts, pumping, vibrating/
compaction, scaffolding
wherevernecessary, curing as directed,
excluding cost of shuttering
andcentering.(a),,In Foundations
40 Prov. & laying RCC M-30 in Column 84.48 Cubic mete4,500.00 380160.00
Item Long Text :Providing, transporting
and laying design-mix Reinforced
Cement Concreteof M30 grade for water
retaining structures using cement from
approvedmanufacturer, sand, 20mm and
down size coarse aggregates,
necessaryadmixtures approved by
Consultants (if required), including all
leadsand lifts, pumping, vibrating/
compaction, scaffolding
wherevernecessary, curing as directed,
excluding cost of shuttering
andcentering.(b),,In Columns
50 Prov. & laying RCC M-30 in Beams 20.00 Cubic mete4,500.00 90000.00
Item Long Text :Providing, transporting
and laying design-mix Reinforced
Cement Concreteof M30 grade for water
retaining structures using cement from
approvedmanufacturer, sand, 20mm and
down size coarse aggregates,
necessaryadmixtures approved by
Consultants (if required), including all
leadsand lifts, pumping, vibrating/
compaction, scaffolding
wherevernecessary, curing as directed,
excluding cost of shuttering
andcentering.(c),,In Beams
Price Schedule
Outline No. : - A 03 Brief Description : - Shuttering Work
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Prov. Fabr Erect. Formwork in Fdn 97.00 Square me450.00 43650.00
Item Long Text :Providing, fabricating
and erecting form work at all levels and
placesand profiles wherever
needed/specified as per drawing
including strikingwith 12mm marine
resistant waterproof ply/Smooth finished
MS plates with adjustable steel props of
acceptable Staging system and
withsufficient bracing as approved by
consultant. Cost to include designingof
proper form work and staging system to
suit the requirements, sealingthe joints
with heavy duty brown self adhesive
tape, aligning to lineand levels including
M.S. Ties, PVC Spacer, Providing
openings/ cutouts/pockets, applying
deshuttering chemical, Deshuttering as
approved by theconsultant etc.,
complete at all levels, double/tripple
heights andprofiles(a),,In Foundations
Price Schedule
Outline No. : - A 04 Brief Description : - Reinforcement Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
Price Schedule
Outline No. : - A 05 Brief Description : - Structural Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Fab. Erec. of Structural steel ISMC etc 86,070.00 Kilogram 25.00 2151750.00
Item Long Text :Loading, unloading,
transportation, fabrication, cleaning &
erection ofstructural steel with mild steel
rolled section / built up
section /combination of both conforming
to
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
30 Prov. & fixing 1.0M height MS Handrail 162.00 Meter 2,000.00 324000.00
Item Long Text :Providing and fixing 1.0
Mtr height vertical 40NB MS Handrail of
mediumduty (Class- 'C') conforming to
IS: 1161 at 1.2 Mtr spacing, 40 NB
MSHandrail as top rail and 25 NB MS
Handrail as middle rail etc. completeand
as per drawing. The handrails should be
coated with 02 coats ofapproved primer
and 02 coats of synthetic enamel paint of
approved makeand colour. (Top
Horizontal Row=40 NB, Middle
Horizontal Row=25 NB,Vertical=40
NB@1.2 Mtr spacing)
Price Schedule
Outline No. : - A 06 Brief Description : - Cofferdam Works including de-watering
10 E/W in excv. upto 1.5 Mtr depth from 283.50 Cubic meter 125.00
EGL
Item Long Text :Earth work in excavation
by mechanical means in dense sand
over areasand stacking with in a lead of
50 M,with ramming, trimming and
dressingof sides
No
Price Schedule
No
Price Schedule
Outline No. : - A 04 Brief Description : - Brick Work
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Prov. Brick masonary work in CM (1:6) 103.05 Cubic mete5,000.00 515250.00
Item Long Text :Providing common burnt
clay brick masonry work.
Immersing the bricks inwater before use
in all necessary projections, cutting,
circularmoulding, corbelling etc.
including cost, conveyance, taxes &
royalties,loading and unloading of all
materials & cost of all
labours,scaffolding, watering & curing,
sundries, T&P etc.complete as per
thedirection of Engineer-in-
Charge(a),,Above FGL in CM (1:6)
Price Schedule
Outline No. : - A 05 Brief Description : - Plastering Work
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Prov. laying 20mm thk Outside plaster 445.00 Square me200.00 89000.00
Item Long Text :Supplying and laying
plaster with cement sand mortar at all
heights,walls surface, beams,
staircases lintel soffits, chajjas,
projectionsnarrow bands and widths etc
including chipping of concrete
surfacesraking joints, scaffolding
cleaning and curing, all as per
drawings,specification and direction of
the Engineer/ Consultant, all
materials,tools plant and labour
complete in all respect.(a),,20 mm thick
outside plaster in CM (1:6)
20 Prov. laying 15mm thk inside plaster 400.00 Square me150.00 60000.00
Item Long Text :Supplying and laying
plaster with cement sand mortar at all
heights,walls surface, beams,
staircases lintel soffits, chajjas,
projectionsnarrow bands and widths etc
including chipping of concrete
surfacesraking joints, scaffolding
cleaning and curing, all as per
drawings,specification and direction of
the Engineer/ Consultant, all
materials,tools plant and labour
complete in all respect(b),,15 mm thick
inside plaster in CM (1:6)
30 Prov. laying 6mm thk ceiling plaster 330.00 Square me140.00 46200.00
Item Long Text :Supplying and laying
plaster with cement sand mortar at all
heights,walls surface, beams,
staircases lintel soffits, chajjas,
projectionsnarrow bands and widths etc
including chipping of concrete
surfacesraking joints, scaffolding
cleaning and curing, all as per
drawings,specification and direction of
the Engineer/ Consultant, all
Price Schedule
Price Schedule
Outline No. : - A 07 Brief Description : - Painting Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Prov. & apply weather coat paint 435.00 Square me150.00 65250.00
Item Long Text :Supplying and applying
two coats with Exterior Quality Acrylic
emulsionweather coat paint of approved
brand and shade over a coat of primer
asper drawings and as specified at all
heights and depths above and
belowplinth level including scaffolding,
all materials, tools, plant andlabour
complete in all respect. (For external
surfaces of buildings andother
structures)
Price Schedule
Outline No. : - A 08 Brief Description : - Water Proofing Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
conc
Item Long Text :"Roof Water proofing
using lime concrete and pressed clay
tiles: Limeconcrete shall consist of
broken brick aggregates and lime.
Proportionof brickbat coba shall be 2.5
parts of brick jelly to one part of lime.The
brick jelly shall be hard, well burnt and of
size varying from 12mmto 25mm. The
lime concrete is then laid over roof to
slope to givespecified thickness and in
slope of 1 in 80 or as shown on the
drawingfor proper roof drainage as per
roof drainage plan. Roof shall befinally
finished with one coarse of machine
pressed clay titles 20 mmthick laid over a
12mm thick of 1:3 mix cement mortar
mixed with 5%crude oil by weight of
cement mixed in mortar. Lime concrete
and tilesshall be taken up the parapet
walls to a height of 150 mm oras shown
inthe drawing.The specification of
pressed clay titles shall be as given in
IS:2690(Part-I).The specification of crude
oil shall be as per IS:2119."
Price Schedule
Outline No. : - A 09 Brief Description : - Reinforcement Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
No
30 C & placing Reinf steel in Beam slab 20.12 Tonnes 7,500.00 150900.00
Item Long Text :Carrying, cutting,
bending, cranking, placing and fixing in
positionsteel reinforcement including
angles/pins provided for the
approvedwelded joints, at all levels
above and below finished ground level
forreinforced cement concrete and
precast reinforced cement concrete
worksincluding supplying approved 18
SWG annealed black binding wire,
coverblocks etc all as per drawings,
specifications and directions of
theEngineer all materials, tools, plant
and labour complete- Fe 500
gradereinforcement conforming to IS:
Price Schedule
Outline No. : - A 10 Brief Description : - Structural Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Fab & Erec. of Structrl work ISMC etc 0.25 Kilogram 20.00 5.00
Item Long Text :Loading, unloading,
transportation, fabrication, cleaning &
erection ofstructural steel with mild steel
rolled section / built up section
/combination of both conforming to
IS:2062, pipes conforming to
IS:1161/IS:1239, in inserts, rungs,
gratings, edge angles, channel
sections,cleats, base plates, splice
plates, chequered plate flooring
etcincluding 2 coats of redoxide zinc-
chromate primer (one coat at shop
andone coat after erection) (DFT 30 to
40 Microns for each coat) & twocoats of
Single pack air drying high gloss
phenolic modified alkydsynthetic enamel
paint with 25-30 micron total dry film
thickness (DFT)of each coat. Total DFT
including paint and primer shall be 120
to 130microns(a),,inserts and other
fixtures , edge angles, ISMC etc.
20 Fab & Erec. of Strl work chequered 96.00 Kilogram 10.00 960.00
plate
Item Long Text :Loading,
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
unloading,transportation, fabrication,
cleaning & erection ofstructural steel with
mild steel rolled section / built up section
/combination of both conforming to
IS:2062, pipes conforming to
IS:1161/IS:1239, in inserts, rungs,
gratings, edge angles, channel
sections,cleats, base plates, splice
plates, chequered plate flooring
etcincluding 2 coats of redoxide zinc-
chromate primer (one coat at shop
andone coat after erection) (DFT 30 to
40 Microns for each coat) & twocoats of
Single pack air drying high gloss phenolic
modified alkydsynthetic enamel paint
with 25-30 micron total dry film thickness
(DFT)of each coat. Total DFT including
paint and primer shall be 120 to
130microns(b),,6 o/p chequred plate on
openings
Price Schedule
Outline No. : - A 11 Brief Description : - Doors and Windows
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Prov. & fixing MS Door along with 19.64 Square me4,000.00 78560.00
frame
Item Long Text :Providing and fixing MS
Door along with frame, holdfast
arrangements(06nos), Hinges (06 nos),
sliding bolt etc. The doors frames shall
befabricated from 1.6 mm thick MS
sheets and shall meet the
generalrequirements of IS:4351.All steel
doors shall consist of double plateflush
door shutters. The door shutter shall be
35 mm (min.) thick withtwo outer sheets
of 1.2 mm rigidly connected with
continuous vertical1.0 mm stiffeners at
the rate of 150 mm centre to centre.
Side, top andbottom edgesof shutters
shall be reinforced by continuous
pressed steelchannel with minimum 1.2
mm. The door shall be sound deadened
by fillingthe inside void with mineral
wool. Doors shall be complete with
allhardware and fixtureslike door closer,
tower bolts, handles, stoppers,aldrops,
locks etc. The cost of grouting the holes
in brickwork with PCC(1:2:4) shall also
be included in this cost.
Price Schedule
Outline No. : - A 12 Brief Description : - Miscellaneous Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Prov. Fabricating chain link fenc57.00 Square me2,500.00 142500.00
Item Long Text :Supplying, fabricating
and fixing PVC coated chain linked
fencing in MSstructural member with
one no of Gate made out of MS
structural membaras per drawing
including synthetic enamel painting over
a coat of primerin structural member
andall necessary arrangements tools,
plants,consumable material etc.
Price Schedule
Outline No. : - A 13 Brief Description : - River Bank Protection Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
----------------------------------------------------------------------------
Price Schedule
20 E/W in excvation from 1.5 Mtr -3.0M 97.20 Cubic mete150.00 14580.00
Item Long Text :Earth work in excavation
by mechanical means in dense sand
over areasand stacking with in a lead of
50 M,with ramming, trimming and
dressingof sides etc.,(authorised
working space, benching and side
slopes forthe excavation will be
measured and paid under this item).
(b),,1.5 mtr to 3.00 mtr
Price Schedule
Outline No. : - A 02 Brief Description : - Concrete Work
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Prov. laying PCC (1:3:6) M-10 5.81 Cubic mete3,500.00 20335.00
Item Long Text :Providing, laying and
compacting plain cement concrete of
followinggrades as defined by IS:456
with graded stone aggregates in
allfoundations, bed blocks, chambers,
trenches, floors, roofs,
pavements,screedings, encasing etc at
all depths below finished ground level
torequired levels, slopes etc including
the cost of shuttering all as perdrawings,
specifications and directions of the
Engineer/ Consultant, allmaterials, tools,
plant and labour complete.(a) M-10
grade (1:3:6)-100mm thick with 20mm
down graded stone aggregate
20 Prov. & laying RCC M-25 in Foundation 14.40 Cubic mete3,500.00 50400.00
Item Long Text :Providing, transporting
and laying design-mix Reinforced
Cement Concreteof M25 grade specified
below using cement of approved grade
fromapproved manufacturer,sand, 20mm
and down size coarse
aggregates,necessary admixtures
approved by Consultants (if required),
includingall leads and lifts, placing ,
vibrating/ compaction,
scaffoldingwherever necessary, curing
as directed, excluding cost of shuttering
andcentering. (a) In Foundations
30 Prov. & laying RCC M-25 in Column 41.10 Cubic mete3,550.00 145905.00
Item Long Text :Providing, transporting
and laying design-mix Reinforced
Cement Concreteof M25 grade specified
below using cement of approved grade
fromapproved manufacturer,sand, 20mm
and down size coarse
aggregates,necessary admixtures
approved by Consultants (if
40 Prov. & laying RCC M-25 in Beam 7.82 Cubic mete3,575.00 27956.50
Item Long Text :Providing, transporting
and laying design-mix Reinforced
Cement Concreteof M25 grade specified
below using cement of approved grade
fromapproved manufacturer,sand, 20mm
and down size coarse
aggregates,necessary admixtures
approved by Consultants (if required),
includingall leads and lifts, placing ,
vibrating/ compaction,
scaffoldingwherever necessary, curing
as directed, excluding cost of shuttering
andcentering.c,,In Beams
50 Prov. & laying RCC M-25 in Slab 20.74 Cubic mete3,650.00 75701.00
Item Long Text :Providing, transporting
and laying design-mix Reinforced
Cement Concreteof M25 grade specified
below using cement of approved grade
fromapproved manufacturer,sand, 20mm
and down size coarse
aggregates,necessary admixtures
approved by Consultants (if required),
includingall leads and lifts, placing ,
vibrating/ compaction,
scaffoldingwherever necessary, curing
as directed, excluding cost of shuttering
andcentering.(d) ,,In Slab
Price Schedule
Outline No. : - A 03 Brief Description : - Shuttering Work
Price Schedule
Outline No. : - A 05 Brief Description : - Reinforcement Works
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
Price Schedule
Outline No. : - A 02 Brief Description : - Concrete Work
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
20 Prov. & laying RCC M-30 in Foundation 1.63 Cubic mete4,000.00 6520.00
Item Long Text :Providing, transporting
and laying design-mix Reinforced
Cement Concreteof M30 grade for water
retaining structures using cement, sand,
20mm anddown size coarse aggregates,
necessary admixtures
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
30 Prov. & laying RCC M-30 in Walls 2.97 Cubic mete4,500.00 13365.00
Item Long Text :Providing, transporting
and laying design-mix Reinforced Cement
Concreteof M30 grade for water retaining
structures using cement , sand,
20mmand down size coarse aggregates,
necessary admixtures approved
byConsultants (if required),
including all leads and lifts,
pumping,vibrating/ compaction,
scaffolding wherever necessary, curing
asdirected, excluding cost of shuttering
and centering.(b),,In Walls
40 Prov. & laying RCC M-30 in Slab 0.96 Cubic mete4,500.00 4320.00
Item Long Text :Providing, transporting
and laying design-mix Reinforced Cement
Concreteof M30 grade for water
retaining structures using cement, sand,
20mm anddown size coarse aggregates,
necessary admixtures approved
byConsultants (if required),
including all leads and lifts,
pumping,vibrating/ compaction,
scaffolding wherever necessary, curing
asdirected, excluding cost of shuttering
and centering.(c),,In Slab
Price Schedule
Outline No. : - A 03 Brief Description : - Shuttering Work
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
No
Price Schedule
No
10 C. laying & fixing Reinf Steel -Fdn. 0.16 Tonnes 6,500.00 1040.00
Item Long Text :Carrying, cutting,
bending, cranking, placing and fixing in
positionsteel reinforcement including
angles/ pins provided for the
approvedwelded joints, at all levels
above and below finished ground level
forreinforced cement concrete and
precast reinforced cement concrete
worksincluding supplying approved 18
SWG annealed black binding wire,
coverblocks etc all as per drawings,
specifications and directions of
theEngineer all materials, tools, plant
and labour complete- Fe 500
gradereinforcement conforming to IS:
1786, Make: Approved(a),,with high yeld
strength deformed bars (Fe-500) for
foundations
Price Schedule
Outline No. : - A 02 Brief Description : - Cement Finishes
Item_ Service No Brief Description Quantity Unit Rate(INR)
No
20 Prov. & laying 6mm thk Cement plaster 5.00 Square me140.00 700.00
Item Long Text :Providing and laying
plaster with cement sand mortar in
foundation depthupto 3.00 M ),
plinth,walls surface, beams, staircases
lintel soffits,chajjas, projections narrow
bands and widths etc including chipping
ofconcrete surfaces raking joints,
scaffolding cleaning and curing, all asper
drawings, specification and direction of
the Engineer/ Consultant,all materials,
tools plant and labour complete in all
respect(b) 6 mm thick cement plaster
proportion 1:4, to ceiling
Price Schedule
Outline No. : - A 03 Brief Description : - Flooring
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 Prov. & laying 300X300 non skid 5.00 Square me650.00 3250.00
ceramic
Item Long Text :Supplying and laying
non skid ceramic tiles of approved colour
and brandconforming to IS ranging from
thickness 6.9 to 7.3 mm as specified
bymanufacturer in floor over average 30
mm thick backing mortar 1:3 andjointing
with cement grout and matching
pigments including curing, complete in
all respect as per drawings,
specifications and directionsof the
Engineer/ Consultant.( for toilet &
Kitchen)a. 300 mm x 300 mm size tiles
20 Prov. & laying 300X200 white ceramic 20.00 Square me600.00 12000.00
Item Long Text :Supplying and laying 1st
class ceramic glazed tiles of approved
shadeand make conforming to IS over 12
mm thick cement mortar 1:3 and
jointedwith grey cement slurry
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
Price Schedule
Outline No. : - A 04 Brief Description : - WOOD & DOOR WORK
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 S/F/F FRP Door Frames 1.60 Square me3,600.00 5760.00
Item Long Text :Supplying, Fitting and
fixing in masonry/RCC/steel,box type
FRP DoorFrames of size 50 mm x 75
mm with FRP Shutter made of
Fibre-glassReinforced Polymer with all
necessary inserts , hardwares,
matchingedges with shutter, painting,
cleaningcomplete in all respect as
perapproved drawing, design or
instruction of Engineer
Price Schedule
Outline No. : - A 05 Brief Description : - Soil,Waste,Rain water pipes
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
10 S/F & testing PVC soil waste SWR 10.00 Meter 300.00 3000.00
pipe
Item Long Text :Supplying, fixing and
testing PVC soil, waste and ventilating
pipes(SWR) of approved makes
conforming 'to IS:13592/ 1990 -Type B
withrubber ring (confirming to IS : 5382)
joints inclusive 'of all necessaryspecials
like bends, tee, offsets, door bends,
junctions, cowls etc.with proper pipe
support with MS angle / chanel,
hangers, brackets withnecessary 'grip
bolts, supports shall be painted with
two coats ofenamel paint over a coat of
'primer, laid under floor/ fixed on
wallsand in pipe shaft etc.,
complete.(internal & shafts )(a) 110 mm
dia. (Clear OD)
20 S/F & testing 32mm dia PVC 15.00 Meter 250.00 3750.00
Pressure pipe
Item Long Text :Supplying, fixing &
30 S/F & testing 15mm dia PVC Pressure 10.00 Meter 200.00 2000.00
pipe
Item Long Text :Supplying, fixing &
testing PVC pressure pipe (6 Kg / Sq
cm) of approvedmake confirming to IS
'4985 for waste connections from wash
basin,kitchen sink to floor trap with
'solvent cement joints, including allthe
fittings laid under floor concealed in wall
'etc., The work shallinclude wall chase
and making good the same in cement
'mortor completeto the satisfaction of
engineer-in-charge. Including proper
pipe'support, hangers, brackets with
necessary grip bolts, supports shall
be'painted with two coats of enamel paint
over a coat of primer. , laidunder floor /
fixed on walls and in pipe shaft etc.,
complete.(b) 15 mm dia
Price Schedule
Outline No. : - A 06 Brief Description : - Sanitary & water supply
Item_ Service No Brief Description Quantity Unit Rate(INR) Amount
No
No
20 Prov. & fixing Indus Wash basin 1.00 NOS 2,500.00 2500.00
Item Long Text :Indus Wash basin of
size 550X400mm with C.I. brackets,
C.P. pillar cock15 mm or equivalent and
32mm C.P.brass waste and PVC
connector ofapproved make and as per
approved specification, drawing,
instruction ofEngineer
30 Prov. & fixing C.P. bib cock -15 mm 1.00 NOS 450.00 450.00
Item Long Text :Supplying and fixing
C.P. bib cock of approved make -15 mm
dia.equivalent complete as per approved
specification, drawing andinstruction of
Engineer
40 Prov. & fixing Long body bib cock -15 1.00 NOS 600.00 600.00
mm
Item Long Text :Supplying and fixing
long body bib cock- 15mm dia
equivalent complete ofapproved make,
as per approved specification, drawing
and instruction ofEngineer
50 Prov. & fixing Angle Stop cock -15 mm 1.00 NOS 700.00 700.00
Item Long Text :Supplying and fixing
C.P. concealed angle stop cock 15mm
size equivalent complete of approved
make, as per approved
specification,drawing and instruction of
Engineer
60 Prov. & fixing Angle Stop cock M/F 1.00 NOS 700.00 700.00
end
Item Long Text :Supplying and fixing
C.P. angle stop cock 15mm dia. male or
female endor equivalent complete of
approved make, as per approved
specification,drawing and instruction of
Engineer
70 Prov. & fixing frameless glass mirror 1.00 NOS 1,200.00 1200.00
Item Long Text :Supplying and fixing 5.5
mm thick approved quality round edged
framelessplate glass mirror of 550mm X
400 mm with 4 nos dome headed
screws ofapproved make, as per
Service No Brief Description Quantity Unit Rate(INR) Amount
No
90 Prov & fixing 8mm dia Health Fa1.00 NOS 700.00 700.00
Item Long Text :Providing & fixing
Health Faucet with 8 mm dia. 1m
Flexible Tube, wallhook & check nuts of
approved make, as per approved
specification,drawing and instruction of
Engineer
EPC Department.
Pricing types:
THE RATES ARE EXCLUSIVE OF GOODS & SERVICES TAX (GST)/INTEGRATED GST
,WHICH IS TO BE BILLED & PAID SEPARATELY.
RATES WILL REMAIN FIRM AND WILL NOT BE REVISED DURING THE CONTRACT
PERIOD.
Deadlines:
TOTAL SCOPE OF WORK SHOULD BE COMPLETED AS PER INSTRUCTION OF PROJECT
MANAGER.
Terms of delivery:
JOB SHOULD BE EXECUTED AS PER INSTRUCTION OF SITE IN-CHARGE AND IN TOTAL
AGREEMENT WITH THE TERMS & CONDITIONS (RELATED TO SAFETY AND WORK RELATED PROCEDURES AND IN TOTAL
COMPLIANCE WITH OUR STATUTORY AND OTHER
REQUIREMENTS) MENTIONED IN THE WORK ORDER.
DELIVERY/COMPLETION DATE 28.02.2019 AND VALIDITY END DATE 30.06.2019 FOR BILL PURPOSE
Penalty for breach of contract:
RISK PURCHASE OF THE SERVICES:
------------------------------
IF YOU FAIL TO COMPLETE THE WORK WITHIN THE SPECIFIED COMPLETION
SCHEDULE, JUSCO RESERVES THE RIGHT TO RISK PURCHASE THE SAME SERVICES
FROM ANY OTHER SOURCE/ CONTRACTOR. IF THE RISK PURCHASE OF THE SERVICES
IS MADE AT HIGHER PRICE THAN THE PRICE IN THIS ORDER, THE ADDITIONAL
COST TO JUSCO WILL BE DEBITED TO YOU.
Contract riders (clauses):
ORDER MADE WITH REFERENCE TO YOUR QUOTATION REF.NO.NIL THROUGH E-MAIL
DATED 10.04.2018 AND FINAL RATES ACCEPTANCE DATED 23.05.2018.
ISSUED LOI REF.NO.JUSCO/PROC/220618 DATED 22.06.2018
YOU SHOULD ACCEPT AND ACKNOWLEDGE THIS ORDER, TERMS & CONDITIONS
MENTIONED IN THIS WORK ORDER WITHIN 3(THREE) DAYS FROM THE DATE OF RECEIPT OF THE SAME. IN CASE OF NO
RESPONSE FROM YOUR END, IT WOULD BE
DEEMED TO BE ACCEPTED BY YOU.
Bills/ Invoice in 2 copies (1 original + 1 signed copy) addressed to Site In charge indicating Project Name and Location thereon shall
be submitted to Site Office along with the following documents :-
Two (2) copies (1 original + 1 duplicate) of Bill duly signed by the Contractor.
Joint Measurement Sheet (JMR) duly signed by the Contractor and certified by Site In charge.
Bills/ Invoice should be certified by the authorized representative of the concerned Department (Departmental Head or Chief)
To CFO, JUSCO
Thro.General Manager(EPC Dept.),
Jamshedpur Utilities & services Co. Ltd.
Sakchi Boulevard Road, Northern Town,
Jamshedpur - 831001
Jharkhand
Price: The price shall include all taxes, royalties applied on all material to be purchased for civil construction work except GST.
Jurisdiction: All disputes relating to this work order shall be subject to and be referred to exclusive jurisdiction of Jamshedpur
Courts.
3 (A) Scope of supply : All construction materials except cement, reinforcements and structural steel, heavy tools , plant and
machinery
(i.e construction equipment's crane . concrete pump etc )will be in
Vendor's scope.
Watch & Ward: JUSCO Limited will supply the above free issue materials as per VENDOR's requirement. However unloading, storage,
watch and ward of the free issue materials issued to VENDOR by JUSCO shall be in VENDOR's scope. VENDOR shall become
custodian of free issue materials
from the day of issue till its final reconciliation to the satisfaction of JUSCO in line with the requirement of the works/ drawing.
Reconciliation of free issue materials: Reconciliation for Cement, reinforcements and structural steel neds to be done as per norms with
RA
bills.
6A. Reconciliation of cement & reinforcement bar: The materials issued shall be fully accounted for by the Contractor. In accounting of
the steel materials issued, an allowance up to a limit of 1% of the weight of reinforcement work as measured and certified respectively
will be allowed as unaccountable wastages and losses.
In addition to unaccountable wastages and losses permitted herein above, accountable wastages for reinforcement in the form of scrap
(off-cuts, cut pieces less than 2m) shall be within permissible limits as specified below:
Reinforcement Steel @2%
Reinforcement bars of 2 m length and above shall be considered as serviceable materials and not as scrap.
Only for re-conciliation of steel materials, rolling margin will be considered if the Vendor has jointly established with the Engineer
during the course of work that such margin exists. For this purpose, a joint record of weighment of random samples for each lot issued
shall be maintained. Rolling margin, however, will not be considered while making payment to the Vendor.
Issue of cement by the JUSCO shall be on the basis of actual weight. The weight of the empty gunny bags shall be duly accounted for.
Consumption norms for cement for controlled concrete will be based on design mix in accordance with IS Code and approved by the
Engineer and for the other items of work norms for consumption shall be based on consumption data indicated in TATA STEEL
Schedule of Rates.
The actual consumption of cement shall be computed based on the above norms and the actual quantum of work certified by the
Engineer. A maximum wastage allowance of up to 2% (Two) on the actual consumption shall be allowed for reconciliation purpose.
Cement consumed for making concrete test cubes, cylindrical test specimens, cement mortar cubes, uses for like cement slurry at
construction joints, finishing etc.
including buttering of concrete pumps and all other wastages incidental to concrete pumping shall be included in the aforesaid
maximum 2% (Two) wastage.
7. Water & Electricity: Construction Water & Power and area lighting shall be in vendor's scope.
PPE's: All the workmen should work with PPE, especially Helmet
& double lifeline safety belt with zero tolerance for working at HEIGHT. All other terms shall be as per our standard safety norms/
policy. If JUSCO will issue the PPE's the same will be deducted from the
Vendor's Bills.
Accommodation of Employee & Worker of Vendor: Under the scope of vendor only space shall provide by JUSCO.
Material Storage/ Site Office: Suitable storage facilities for your own equipment, materials & free issue material and Site office for your
requirement is under scope of Vendor. for same space will provide by JUSCO.
Civil Material Testing: Arranging civil material Testing, Periodic Calibration and Test Certificates of equipments, tools & Tackles required
for execution of work is under scope of Vendor. must folow the
JUSCO rental policy.
Insurance: Insurance to your Plant, Machinery, Labour and Staff is under scope of Vendor.
Scope: Includes all plant & machinery, materials, transportation, handling, dewatering (as per requirement), supervision and every other
incidental cost and charges whatsoever required completing the work in all aspects as per the specifications/ drawings.
Statutory Requirements: Compliance with all the statutory requirements prevailing in the State of Jharkhand and as required for carrying
out the works including labour license, minimum wage requirements, PF, ESI, Leave Wages, Bonus, Retrenchment benefits,
Accidental Insurance/ Workmen compensation and all other liabilities under Contract Labour (Regulation and Abolition) Act etc. All
payments to meet all the statutory requirements are deemed to have been included in the price indicated. Documentary proof for the
above is to be submitted to JUSCO along with R.A. Bills. No extra payment will be made for statutory compliances.
Compliance of Safety Standards: You will abide by all safety standards, specifications and practices in construction and also the
instructions of our Safety Engineer/ Steward at site. You are responsible for the safety of your staff and employees, employees of other
agencies working in your area of operation. You shall delegate the responsibility of implementation of safety rules to one of your staff. It
is obligatory for the contractors to issue the required personnel protective appliances to all the employees (including the supervisors)
and insure that the same are used while at work. Every employee shall wear safety shoes/boots, safety goggles and safety helmets at
all times. In case of repeated violation of safety rules and precautions by any of your workman, he will not be permitted inside the site
of work. Your authorized representative of safety shall attend all safety meetings/ PEP Talk convened by JUSCO Site Safety Engineer/
Steward, and abides by
his instructions.
Others: All other cost of works not indicated above but required for successful completion of work.
Price:
==========
The price shall include all taxes, royalties applied on all material to be purchased for the work except GST.
The Price also includes all the Statutory Liabilities of the Labour.
The above prices shall remain firm till the entire scope of works is completed to the satisfaction of the JUSCO and no escalation or
revision of prices shall be entertained under any circumstances (increase in cost of material, machineries, transportation, manpower,
local expenses, etc.). There will not be any liability on JUSCO due to idling of Plant machinery/ Equipment or Labour.
LIQUIDATED DAMAGES:
======================
If VENDOR does not comply with completion period (s) specified herein or other obligations assumed under this VENDOR shall
automatically be liable for the liquidated damages. The Liquidity Damages shall be applied for the delayed period at the rate of 0.5
percent (0.5%) per week subject to a maximum of 5 percent (5%) of the contract value of
VENDOR.
<H>20. Bonus Clause: 1% of basic total order value shall be paid subject to completion of complete job within scheduled</>
<H>21. Payment Terms three orders: Monthly progress payment of 95% shall be released against progress bills within 30 to 45 days
against certification of invoices by us, 2.5% after completion of project and balance 2.5% defect liability period of 18 months.</>
<H>a),,You will deposit Rs.8.00 Lakh as PBG in by DD or Bank Guarantee instrument (should be valid till completion of project)</>
<H>b),,We will pay Rs.10.00 Lakh after success full mobilization, meaning construction of yard, hutment, office setup, deployment of
man & machinery including site engineers subject to certification from project manager.</>
<H>c),,Mobilization payment shall be adjusted @20% from each bill and in maximum within six months of mobilization date.</>
<H>D) Completion scheduled: (8) Eight months from date of order subject to clear availability of drawing and front from JUSCO. The
milestone schedule shall be separately signed off with project manager.</>
The rate of any extra item of work shall be determined by a Committee consisting of representatives of the Employer and the Engineer
and constituted by the Employer for this purpose.
All such rates shall be derived from the rates set out in the Priced
Bill of Quantities for a similar type of work if in the opinion of the
Committee the same shall be applicable.
If in the opinion of the Committee the Priced Bill of Quantities does not contain rates applicable for the extra items of work then rates
shall be derived from a similar type of work being executed by the same
Contractor for some other contract.
If in the opinion of the Committee, such similar type of work does not exist, then rates of such extra items of work shall be determined
by the Committee as may be considered reasonable by it. For this purpose the Contractor shall submit to the Engineer detailed
analysis of the rate proposed by the Contractor supported with relevant vouchers. While determining rates of extra items, the
Committee shall provide an allowance of 12½ % towards Contractor's overheads and profits.
http://www.juscoltd.com/notice-08aug16a.pdf http://www.juscoltd.com/notice-01jul17.pdf
For Jamshedpur Utilities & Services Company Limited
0
Amount
2000000.00
200000.00
Amount
35437.50
Amount
Amount
Amount
9000.00
Amount
7200.00
OTAL
F NO
n shall
ed by
storage,
me
orms with
nting of
ectively
m of scrap
er
ot issued
nted for.
by the
EL
he
pose.
rry at
ms/
for your
required
very other
r carrying
. All
for the
e
of other
ur staff. It
visors)
lmets at
the site
Engineer/
n or
npower,
ould
ll
of 0.5
5 days
</>
)</>
ment of
>
O. The
ctor.
ra rate
ed by the
Engineer
rates
rmined
ed
vary
NINETY
uirements
ndor's
work
ble for