Beruflich Dokumente
Kultur Dokumente
BKG4721
Gas System Lab
Experiment 1:
SHIELDS METAL ARC WELDING (SMAW)
Name
Matric No.
Group
Program
Section
Date
A. Safety Practices
Student will be able to demonstrate then safe and proper setup,
operation and maintenance of shielded metal Arc Welding
machine.
2.0 INTRODUCTION
2
BKG4721 - Gas System Lab Sem I – 200/2010
PROCEDURES DETAILS
3
BKG4721 - Gas System Lab Sem I – 200/2010
10mm
Kawasan kimpal
10mm semula
PROCEDURES DETAILS
4
BKG4721 - Gas System Lab Sem I – 200/2010
2. Performing 1st layer of 1. Place the plate on smooth and even surface.
welding. Use clamp or jig to hold the plate.
2. Use electrode E6013 SWG 8 on welding
current 105A –175A
3. Electrode angle should be 75° - 80° according
to welding position.
4. Place the trial plate on the working plate
before starts the welding.
70°-80°
Timbunan kimpalan
1st layer of
welding
1st layer
PROCEDURES DETAILS
5
BKG4721 - Gas System Lab Sem I – 200/2010
1st layer
2nd layer
4.0 Discussion
6
BKG4721 - Gas System Lab Sem I – 200/2010
d) Sketch and name THREE (3) main equipment of Shielded Metal Arc
Welding (SMAW)?
5. Conclusion
6. Reference