Sie sind auf Seite 1von 30

ZENON SCADA DRIVER LİST

zenon 7.0
Rev. 1

zenon 7

PLC and Bus drivers


Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Codesys Soft PLC driver for the Codesys Soft
Codesys SoftPLC standard Codesys RT interface PLC and Elau
3S
driver
ZT-3S32 A
Max 4
Ethernet, Local 3S-Gateway  
(Coedsys Gateway Server)
Replaced Codesys Soft PLC driver
PLCs, Moeller
for the Codesys 3S-ARTI interface.
XControl PLCs
The driver was replaced by the
XC200 and
Codesys Arti NG Treiber driver.
Codesys Arti XC600, and Elau
3S
SoftPLC driver
ZT-3S32_ARTI A
PacDrive
Ethernet, Local 3S-Arti  
Controller MAX 4,
C200, C400,
C600, P600.
Codesys Soft PLC driver "New
PLCs, Moeller
Generation" for the Codesys 3S-
XControl PLCs
ARTI (Asynchron Runtime
XC200 and
Interface) interface. The driver
Codesys Arti NG XC600, and Elau
3S
SoftPLC driver
ZT-3S_ARTI_NG A supports direct variable import from
PacDrive
Ethernet, Local 3S-Arti  
the Codesys development
Controller MAX 4,
environment and replaces the
C200, C400,
Codesys Arti Soft PLC driver.
C600, P600.
Arcnet driver for ABB PLCs based ABB PLC of the
on Arcnet Interface Card from So series 07KTxx
ARCNET - Driver Coaxialcable
ABB
for ABB
ZT-ARCNETNT A Hard with Arcnet
RG62/U
Arcnet  
connection

Driver for ABB serial driver for ABB 07KT94 PLCs ABB 07KT94
ABB
07KT94
ZT-CS3132 A Serial unknown  

The IEC61850 Client driver.


The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client IEC 61400-25-4
IEC 61400-25-4 ZT-IEC61400-25- services via TCP/IP (profile A1/T1). Annex C
ABB
Annex C 4-C
R
compatible Server
Ethernet IEC 61850 
The driver acts as Client (Master)
during comunication.
The driver supports Reporting
(unbuffered and buffered).

The IEC61850 Client driver.


The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client
services via TCP/IP (profile A1/T1). IEC 61850
ABB IEC 61850 driver ZT-IEC61850 R The driver acts as Client (Master) compatible PLCs Ethernet IEC 61850 
during communication.
The driver supports Reporting
(unbuffered and buffered).

Open Modbus TCP/IP driver with


the following differences compared
to the standard Modbus driver: All controllers and
- TCP/IP channel bundling gateways
- improved communication with supporting Open
gateways Modbus TCP/IP.
- read and write only for holding Sequence of
register Events is only
- supports only Open Modbus available for
TCP/IPprotocol AREVA MiCOM
- Sequence of Events for AREVA P126/P127, GE
MiCOM 126/127, GE Multilin F650, Multilin F650, GE
GE Multilin UR-series, ICE NPx800, Multilin UR-series,
Modbus Energy Modbus RTU over
ABB
driver
ZT-MODBUS_E C Schneider MODICON TSX ICE NPI 800, ICE Ethernet
TCP 
Premium with COSTRONIC NPID 800 and
Software Schneider
MODICON TSX
www.areva-td.com, (Premium,M340,
www.gedigitalenergy.com, Quantum) with
www.groupeice.com, Function block
www.costronic.ch (DFB) from
Costronic and
Schneider Sepam
Protection Relais.

The driver supports the protocol


"Modbus RTU" over a serial All PLCs
connection and over a TCP/IP supporting Modbus RTU -
connection and the protocol "Open Modbus RTU, serial, Open
Modbus RTU and
Modbus TCP" for TCP/IP Open Modbus Modbus TCP,
ABB Open Modbus ZT-MODRTU32 A
TCP/IP or
Serial, Ethernet
Modbus RTU over  
TCP connection. The driver acts as a
Modbus Master. (For a Modbus Modbus TCP, Modbus
Slave please use the Process ASCII(seriell) ASCII - serial
Gateway)
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
PDNet from the company Apex Schneider
(www.apex.de), PDnet stands for Modicon PLCs:
Process Data Transport Net and in TSX Compact
the lower communication levels is A120, TSX
based on Arcnet. Compact Micro,
TSX A250, A350,
A500, TSX
Bussystem,
PDNet PCI - Quantum. ABB
ABB
driver
ZT-PADNETPCI A
Protronic PLCs:
Coaxialcable PDNet  
RG62/U
T200, CS31,
AC31. Siemens
PLCs: S5-115U,
S5-135U, S5-
155U, S7-300, S7-
400

VME bus driver for LogidynD1 and LogidynD1 and


LogidynD2 systems. Is developed
AEG VMEBUS driver ZT-AGVME A LogidynD2 Unknown unknown  
by Alstom Berlin.

Supports all connections which are Allen Bradley PLC


available with RS Linx DataHighway
types: PLC2,
(http://www.software.rockwell.com) Serial, Plus, DeviceNet,
Allen Bradley RS- PLC3, PLC5,
Allen-Bradley
Linx driver
ZT-ALLENBNT A
PLC5250,
Bussystem, DataHighway,  
Ethernet DF1, TCP/IP,
SLC500;
ControlNet

For all Allen Bradley PLCs All Allen Bradley


Allen Bradley DF1- supporting DF1. The driver works PLCs with DF1
Allen-Bradley
driver
ZT-ALLENDF1 A
interface
Serial DF1  
half duplex

Ethernet/IP driver for


communication via Common
Industrial Protocol - CIP from Open
DeviceNet Vendor Organisation
(ODVA) with Allen-Bradley Logix Allen-Bradley
PLCs. The driver supports direct ControlLogix,
browsing of variables from the PLC, EtherNet/IP,
Allen-Bradley CompactLogix
Allen-Bradley
ODVA driver
ZT-LOGIX_ODVA C offline browsing from projectfile and MicroLogix
Ethernet Common  
(*.L5K) and blockread/write for all Industrial Protocol
PLCs
datatypes including structures and
arrays.

W ww.ab.com

VME bus driver for LogidynD1 and LogidynD1 and


LogidynD2 systems. Is developed
Alstom VMEBUS driver ZT-AGVME A LogidynD2 Unknown unknown 
by Alstom Berlin.

Driver for the IEC 60870-5-101 PLCs supporting


(serial) and the IEC 60870-5-104 the IEC 60870-5-
IEC 60870-5- (TCP/IP) protocol; a Master 101 or the IEC IEC 60870-5-104,
Alstom
101_104 driver
ZT-IEC870 C (controlling station) 60870-5-104
Serial, Ethernet
IEC 60870-5-101 
protocol.

PDNet from the company Apex Schneider


(www.apex.de), PDnet stands for Modicon PLCs:
Process Data Transport Net and in TSX Compact
the lower communication levels is A120, TSX
based on Arcnet. Compact Micro,
TSX A250, A350,
A500, TSX
Bussystem,
PDNet PCI - Quantum. ABB
Apex
driver
ZT-PADNETPCI A
Protronic PLCs:
Coaxialcable PDNet  
RG62/U
T200, CS31,
AC31. Siemens
PLCs: S5-115U,
S5-135U, S5-
155U, S7-300, S7-
400

Driver for all Applicom interface All PLCs, which


cards, which support MPI or support MPI resp.
Applicom Applicom driver ZT-APPL B Modbus Plus. (http:\\www.applicom- Modbus Plus
Bussystem MPI, Modbus Plus  
int.com)

Writes data cyclically to the


harddisk in RAW format. (Only
values, no timestamps, no status
Archive driver information). The data have to be -
Archive
(RAW format)
ZT-ARCHDRV A opened / further processed with Unknown unknown 
external tools. (Tools only as
examples available from COPA-
DATA)

Arcnet driver for ABB PLCs based ABB PLC of the


on Arcnet Interface Card from So series 07KTxx
ARCNET - Driver Coaxialcable
Arcnet
for ABB
ZT-ARCNETNT A Hard with Arcnet
RG62/U
Arcnet 
connection
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Driver for the IEC 60870-5-101 PLCs supporting
(serial) and the IEC 60870-5-104 the IEC 60870-5-
IEC 60870-5- (TCP/IP) protocol; a Master 101 or the IEC IEC 60870-5-104,
Areva
101_104 driver
ZT-IEC870 C (controlling station) 60870-5-104
Serial, Ethernet
IEC 60870-5-101 
protocol.

Open Modbus TCP/IP driver with


the following differences compared
to the standard Modbus driver: All controllers and
- TCP/IP channel bundling gateways
- improved communication with supporting Open
gateways Modbus TCP/IP.
- read and write only for holding Sequence of
register Events is only
- supports only Open Modbus available for
TCP/IPprotocol AREVA MiCOM
- Sequence of Events for AREVA P126/P127, GE
MiCOM 126/127, GE Multilin F650, Multilin F650, GE
GE Multilin UR-series, ICE NPx800, Multilin UR-series,
Modbus Energy Modbus RTU over
Areva ZT-MODBUS_E C Schneider MODICON TSX ICE NPI 800, ICE Ethernet 
driver TCP
Premium with COSTRONIC NPID 800 and
Software Schneider
MODICON TSX
www.areva-td.com, (Premium,M340,
www.gedigitalenergy.com, Quantum) with
www.groupeice.com, Function block
www.costronic.ch (DFB) from
Costronic and
Schneider Sepam
Protection Relais.

The driver supports the protocol


"Modbus RTU" over a serial All PLCs
connection and over a TCP/IP supporting Modbus RTU -
connection and the protocol "Open Modbus RTU, serial, Open
Modbus RTU and
Modbus TCP" for TCP/IP Open Modbus Modbus TCP,
Areva Open Modbus ZT-MODRTU32 A
TCP/IP or
Serial, Ethernet
Modbus RTU over 
TCP connection. The driver acts as a
Modbus Master. (For a Modbus Modbus TCP, Modbus
Slave please use the Process ASCII(seriell) ASCII - serial
Gateway)

SaNORS (Standard asfinag SaNORS


SaNORS - emergency call interface) - driver for compatible
Asfinag Asfinag SOS- ZT-SANORS R the Asfinag SOS-telephones Asfinag SOS- Ethernet SaNORS  
telephones (www.asfinag.net) telephones

Direct TCP/IP driver for Bachmann MP 2xx/E, ME


Bachmann M1 M1 PLCs (www.bachmann.at) 203/E, ME
Bachmann
driver
ZT-BACH A
203/EN
Ethernet unknown  

Replaced BACnet driver. The driver


has been replaced by the BACnet All Bacnet
NG driver. "BACnet/IP,
ASHRAE compliant BACnet driver Annex J"
Bacnet and
BACnet
DDC4000 driver
ZT-BACNET C for "BACnet/IP, Annex J". The driver compliant PLCs; Ethernet BACnet/IP 
supports spontaneous data traffic. Kieback + Peter
www.bacnet.org DDC4000 PLCs

This driver comunicates to one or


more BACnet devices (BACnet-
Automation stations) using All PLCs with
BACnet driver BACnet/IP protocol. The connected BACnet/IP
BACnet
Next Generation
ZT-BACNETNG C BACnet devices have to be support.
Ethernet BACnet/IP 
operated as BACnet servers. The
driver implements only client
functionalities.

For serial hand-held scanner BCI hand-held


Drv for BCI hand-
BCI
held scanner
ZT-BCI A (http://www.bci-gmbh.de) scanner Serial unknown 

Replaced driver based on the


Beckhoff ADS interface
Beckhoff TwinCat (www.beckhoff.com) The driver has TwinCat SoftPLC
Beckhoff
ADS driver
ZT-BECKH32 A been replaced by the Beckhoff NG Ethernet, Local ADS 
driver. A conversion wizard is
available.

Driver for Beckhoff BC/BK9000. The


driver is based on the TC-ADS Beckhoff BC/BK
Beckhoff BC-BK interface and uses a protocol
Beckhoff
9000
ZT-BECKH9000 A 9000 bus clamps Ethernet TC-ADS 
optimized for the bus clamps.
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Beckhoff TwinCAT driver "New
generation" for TwinCAT Soft PLC
2.60 and higher. The driver is based TwinCat Soft PLC
on the TC-ADS interface. The driver 2.60 and higher-
Beckhoff TwinCat replaces the Beckhoff TC-ADS and Serial, Ethernet,
Beckhoff
NG driver
ZT-BeckhNG A also for TwinCat
Local
TC-ADS 
the Beckhhoff ADS driver. A v3
conversion wizard is available. The
TC-ADS software has to be
installed.

Replaced driver based on the


Beckhoff TC-ADS interface.
(www.beckhoff.com) The driver has
Beckhoff TwinCat been replaced by the Beckhoff NG TwinCat SoftPLC Serial, Ethernet,
Beckhoff
TC-ADS driver
ZT-BECKHTC32 A driver. A conversion wizard is Local
TC-ADS  
available. The TC-ADS software
has to be installed.

Driver for the energy analysis


Energyanalysis UPM 3000
Berg
device UPM 3000
ZT-UPM32 A device UPM 3000 from Berg. Unknown unknown  

Driver for B+R Burklimat or B+R


System 2000 PLCs. Needs no PVI B+R System 2000
Bernecker + software but a special handling- and B+R
Rainer
BR TCP-IP driver ZT-BURTCP C modul in the PLC witch can only Burklimat
Ethernet B+R TCP  
orderd from B+R . (www.br-
automation.com)

The driver has been replaced by the All Bernecker and


BR-PVI NG driver. Rainer PLCs
The driver is based on PVI interface which can use the
from Bernecker and Rainer. The PVI
variables can be online imported. communication
Communication parameters for all like System 2000
Bernecker + BR-PVI based variables are stored in a family (2003, Serial, Ethernet,
Rainer driver (replaced)
ZT-BUR20032 A
2005 etc), CAN Bus Adapter
PVI 
configuration file. The driver
supports spontaneous data Acopos, X20
exchange and hysteresis. (www.br- System,
automation.com) AutomationPC,
PowerPanel and
others.

Driver for Bernercker and Rainer BuR RFID


RFID Transponder Reader Transponder
BR Transponder 4102/4150 (BuR Modell number: Reader
Bernecker +
Reader ZT-BuR41xx32 C 5E9000.29) with USB interface. 4102/4150 (BR USB unknown 
Rainer
4102/4150 modell number:
5E9000.29)

Up to date Bernecker and Rainer All Bernecker and


driver based on PVI interface from Rainer PLCs
Bernecker and Rainer. The which can use the
variables can either be imported PVI
online from the PLC or offline form communication
the B&R OPC interface. like System 2000
Bernecker + BR-PVI based Communication parameters are family (2003,
Rainer driver
ZT-BURPVI A
2005 etc),
Serial, Ethernet PVI  
stored at each variable. The driver
supports spontaneous data Acopos, X20
exchange and hysteresis. (www.br- System,
automation.com) AutomationPC,
PowerPanel and
others.

Mininet Master driver for B+R PLCs B+R Minicontrol


Bernecker + Mininet-Master (www.br-automation.com) and B+R System
Rainer driver
ZT-MINI32 A
2000
Serial Mininet  

Driver for comunication with a Biffi DCM Master


Biffi-Tyco Flow redundant Biffi DCM Master station. Station Biffi DCM SCADA
Control
Biffi DCM ZT-BIFFIDCM B
(redundant)
Ethernet
(TCP/IP)  
(www.biffi.it)

The driver waits on a TCP/IP port, Any Modbus


until the Brodersen Gateway PLCs that can be
establishes a GPRS connection. connected via the
Passive Modbus Then it communicates via Modbus Modbus RTU over
Brodersen
RTU driver
ZT-MODLISTEN R Brodersen UCM- Ethernet
TCP 
RTU. (www.brodersencontrols.com) 97 GPRS-
Gateway.

Driver for straton connection. straton


Brodersen straton driver ZT-STRATON - Ethernet, Local TCP/IP 
Driver for communication with
straton PLCs. Replaces straton 32
driver. The driver can use several PLCs based on
Brodersen straton NG driver ZT-StratonNG A connections at the same time and the straton VMTK. Ethernet TCP/IP 
uses an improved communication
concept.

Driver for Brodersen RTUs


System 2000 Brodersen RTUs
Brodersen
driver
ZT-SYS2000 A (www.brodersencontrols.com) Serial, Bitbus unknown  
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Driver for Brodersen RTUs with
logging mechanisms. Supports the
System 2000 functionality of reading historical Brodersen RTUs
Brodersen
driver with logging
ZT-SYSLOG B Serial, Bitbus unknown  
(logged) data.
(www.brodersencontrols.com)

The driver communicates via the


module KM471with connected
ECOCAN-BUS modules. Modul KM471
Buderus Buderus32 driver ZT-BUDERUS A Serial 3964R/RK512  
(http://www.heiztechnik.buderus.de)

Driver for straton connection. straton


Copalp straton driver ZT-STRATON - Ethernet, Local TCP/IP 
Driver for communication with
straton PLCs. Replaces straton 32
driver. The driver can use several PLCs based on
Copalp straton NG driver ZT-StratonNG A connections at the same time and the straton VMTK. Ethernet TCP/IP 
uses an improved communication
concept.

Open Modbus TCP/IP driver with


the following differences compared
to the standard Modbus driver: All controllers and
- TCP/IP channel bundling gateways
- improved communication with supporting Open
gateways Modbus TCP/IP.
- read and write only for holding Sequence of
register Events is only
- supports only Open Modbus available for
TCP/IPprotocol AREVA MiCOM
- Sequence of Events for AREVA P126/P127, GE
MiCOM 126/127, GE Multilin F650, Multilin F650, GE
GE Multilin UR-series, ICE NPx800, Multilin UR-series,
Modbus Energy Modbus RTU over
Costronic ZT-MODBUS_E C Schneider MODICON TSX ICE NPI 800, ICE Ethernet 
driver TCP
Premium with COSTRONIC NPID 800 and
Software Schneider
MODICON TSX
www.areva-td.com, (Premium,M340,
www.gedigitalenergy.com, Quantum) with
www.groupeice.com, Function block
www.costronic.ch (DFB) from
Costronic and
Schneider Sepam
Protection Relais.

Driver for CTI PLCs,, Texas


Instruments TI 505 PLCs or Simatic CTI PLCs, Ti505,
545/555 PLCs. The driver support Simatic 545,
CTI CTI driver ZT-CTI B the protocols CAMP and NITP with Simatic 555
Ethernet NITP, CAMP 
Packed Task Codes.

Driver for Texas Instruments TI 505


TI 505 - 545 / 545. Protocols: TBP,NITP, TCP/IP TI 505 and 545 TCP/IP, TBP,
CTI
driver
ZT-TI500 A Serial, Ethernet
NITP 

Driver for the Danfoss control Danfoss AKC


devices via AKC OLE interface.
Danfoss Danfoss driver ZT-DAN A control device Serial 3964R/RK512  
(www.danfoss.com)

Connection to the DataTaker data


recording and logging systems All DataTaker
DataTaker DataTaker driver ZT-DATATAKE A (www.datataker.com) models Serial unknown  

Data exchange with external


programs on file basis. Values are
read from a file and displayed resp. -
Dateien File driver ZT-DATEI32 A archived in zenon. Values can also Local unknown  
be written into a file by zenon.

Driver for the data exchange with All Applications


applications supporting DDE. Also
Dateien DDE Client driver - - supporting DDE. Ethernet, Local DDE  
supports NET DDE.

Writes data cyclically to the


harddisk in RAW format. (Only
values, no timestamps, no status
Archive driver information). The data have to be -
Datenbanken
(RAW format)
ZT-ARCHDRV A opened / further processed with Unknown unknown  
external tools. (Tools only as
examples available from COPA-
DATA)

Data exchange with external


programs on file basis. Values are
read from a file and displayed resp. -
Datenbanken File driver ZT-DATEI32 A archived in zenon. Values can also Local unknown  
be written into a file by zenon.
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Driver for the data exchange with
All Applications
applications supporting DDE. Also
Datenbanken DDE Client driver - - supporting DDE. Ethernet, Local DDE  
supports NET DDE.

The driver is used for the SQL database


bidirectional data exchange with a
Datenbanken SQL Driver ZT-SQLDRV A supporting ODBC Ethernet, Local SQL  
SQL database supporting ODBC.

Driver for the data exchange with All Applications


applications supporting DDE. Also
DDE DDE Client driver - - supporting DDE. Ethernet, Local DDE 
supports NET DDE.

For DMX512 Dimmerbus protocol


from U.S. Institute of Theatre -
Dimmerbus DMX 512 driver ZT-DIMM A Bussystem Dimmerbus  
Technology (USITT)

Connection to DNP3 compatible All DNP3


PLCs DNP3, GE
DNP3 DNP3 driver ZT-DNP3 C compatible PLCs Serial, Ethernet
Harris(DNP3)  

Driver for the communication with


LON nodes via iLon100 router from LON nodes
Echelon i-LON 100 driver ZT-LON100 C Echelon. (www.echelon.com) Ethernet Lon Bus  

Driver for the communication with LON nodes Ethernet, PC Slot


Echelon LON driver ZT-LON32 C LON nodes.
Card
Lon Bus 

Driver for the communication with


the European Installation Bus (EIB / EIB/KNX capable
European KNX). In the Runtime the driver
EIB
Installation Bus
ZT-EIBV2_32 C stations Serial, Ethernet EIB Bus 
needs the Falcon Runtime.

Codesys Soft PLC driver for the Codesys Soft


Codesys SoftPLC standard Codesys RT interface PLC and Elau
Elau
driver
ZT-3S32 A
Max 4
Ethernet, Local 3S-Gateway  
(Coedsys Gateway Server)

Replaced Codesys Soft PLC driver Codesys Soft


for the Codesys 3S-ARTI interface. PLCs, Moeller
The driver was replaced by the XControl PLCs
Codesys Arti NG Treiber driver. XC200 and
Codesys Arti XC600, and Elau
Elau
SoftPLC driver
ZT-3S32_ARTI A
PacDrive
Ethernet, Local 3S-Arti 
Controller MAX 4,
C200, C400,
C600, P600.

Codesys Soft PLC driver "New Codesys Soft


Generation" for the Codesys 3S- PLCs, Moeller
ARTI (Asynchron Runtime XControl PLCs
Interface) interface. The driver XC200 and
Codesys Arti NG supports direct variable import from XC600, and Elau
Elau
SoftPLC driver
ZT-3S_ARTI_NG A
PacDrive
Ethernet, Local 3S-Arti 
the Codesys development
environment and replaces the Controller MAX 4,
Codesys Arti Soft PLC driver. C200, C400,
C600, P600.

For point-to-point communication or Eldatic, OC, POC


automatic calling modem resp. ELFE
Elin Eldatic driver ZT-ELIN A
systems
Serial unknown 
connection.

The ELREST32 Network driver is CAN_M167,


used for the data connection to an CAN_M515,
Elrest CAN Elrest net system via a CAN/MPC or CAN_M960,
Elrest
Network driver
ZT-ELREST32 A
CAN_C515,
PC Slot Card unknown 
RS232 interface.
GRAPHDEV.

Driver for ESA W indows CE Siemens S7-


terminal including ESA PCI CIB PLCs or
communication card for W indows compatible PLCs
Driver for ESA CE for the communication with
ESA
PCI CIB
ZT-ESA32 A (e.g. Vipa) with Local MPI 
PLCs supporting MPI. S7 functions via
MPI.

Driver for fire alarm system Esser


BMZ 8000. The driver only supports
Driver for Esser reading access. (http://www.igs- Esser BMZ 8000 Protokoll1,
Esser
BMZ 8000
ZT-ESSER32 B Serial
Protokoll2 
hagen.de/brandzentralen.htm)

Driver for Euchner chip card ident Euchner


Ident System system (www.euchner.de) Identsystem
Euchner ZT-EUCH C Serial unknown  
driver CIS3(A)

EasyIP driver for Festo IPC/FEC, FPC 101, Festo


Festo EasyIP Multiprog programming. FST-
Festo
Multiprog driver
ZT-FEASYIP A EasyIP Ethernet
Programmierung  
(www.festo.com)

Serial/CI driver for Festo Supports series


FPC/IPC/FEC, FST programming. FEC, IPC and
Festo Serial-CI Uses testing system of the FST FPCxxx, no FST-
Festo
driver, FST
ZT-FEFRC A
addintional
Serial
Programmierung 
kernel. (www.festo.com)
components
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
The driver supports the protocol
"Modbus RTU" over a serial All PLCs
connection and over a TCP/IP supporting Modbus RTU -
connection and the protocol "Open Modbus RTU, serial, Open
Modbus RTU and
Modbus TCP" for TCP/IP Open Modbus Modbus TCP,
Gantner Open Modbus ZT-MODRTU32 A
TCP/IP or
Serial, Ethernet
Modbus RTU over 
TCP connection. The driver acts as a
Modbus Master. (For a Modbus Modbus TCP, Modbus
Slave please use the Process ASCII(seriell) ASCII - serial
Gateway)

Open Modbus TCP/IP driver with


the following differences compared
to the standard Modbus driver: All controllers and
- TCP/IP channel bundling gateways
- improved communication with supporting Open
gateways Modbus TCP/IP.
- read and write only for holding Sequence of
register Events is only
- supports only Open Modbus available for
TCP/IPprotocol AREVA MiCOM
- Sequence of Events for AREVA P126/P127, GE
MiCOM 126/127, GE Multilin F650, Multilin F650, GE
GE Multilin UR-series, ICE NPx800, Multilin UR-series,
Modbus Energy Modbus RTU over
GE Fanuc
driver
ZT-MODBUS_E C Schneider MODICON TSX ICE NPI 800, ICE Ethernet
TCP 
Premium with COSTRONIC NPID 800 and
Software Schneider
MODICON TSX
www.areva-td.com, (Premium,M340,
www.gedigitalenergy.com, Quantum) with
www.groupeice.com, Function block
www.costronic.ch (DFB) from
Costronic and
Schneider Sepam
Protection Relais.

The driver supports the protocol


"Modbus RTU" over a serial All PLCs
connection and over a TCP/IP supporting Modbus RTU -
connection and the protocol "Open Modbus RTU, serial, Open
Modbus RTU and
Modbus TCP" for TCP/IP Open Modbus Modbus TCP,
GE Fanuc Open Modbus ZT-MODRTU32 A
TCP/IP or
Serial, Ethernet
Modbus RTU over 
TCP connection. The driver acts as a
Modbus Master. (For a Modbus Modbus TCP, Modbus
Slave please use the Process ASCII(seriell) ASCII - serial
Gateway)

Connection to DNP3 compatible All DNP3


PLCs DNP3, GE
GE Harris DNP3 driver ZT-DNP3 C compatible PLCs Serial, Ethernet
Harris(DNP3) 

The IEC61850 Client driver.


The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client IEC 61400-25-4
IEC 61400-25-4 ZT-IEC61400-25- services via TCP/IP (profile A1/T1). Annex C
GE Multilin
Annex C 4-C
R The driver acts as Client (Master) compatible Server
Ethernet IEC 61850 
during comunication.
The driver supports Reporting
(unbuffered and buffered).

The IEC61850 Client driver.


The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client
services via TCP/IP (profile A1/T1). IEC 61850
GE Multilin IEC 61850 driver ZT-IEC61850 R The driver acts as Client (Master) compatible PLCs Ethernet IEC 61850 
during communication.
The driver supports Reporting
(unbuffered and buffered).
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Open Modbus TCP/IP driver with
the following differences compared
to the standard Modbus driver: All controllers and
- TCP/IP channel bundling gateways
- improved communication with supporting Open
gateways Modbus TCP/IP.
- read and write only for holding Sequence of
register Events is only
- supports only Open Modbus available for
TCP/IPprotocol AREVA MiCOM
- Sequence of Events for AREVA P126/P127, GE
MiCOM 126/127, GE Multilin F650, Multilin F650, GE
GE Multilin UR-series, ICE NPx800, Multilin UR-series,
Modbus Energy Modbus RTU over
GE Multilin
driver
ZT-MODBUS_E C Schneider MODICON TSX ICE NPI 800, ICE Ethernet
TCP 
Premium with COSTRONIC NPID 800 and
Software Schneider
MODICON TSX
www.areva-td.com, (Premium,M340,
www.gedigitalenergy.com, Quantum) with
www.groupeice.com, Function block
www.costronic.ch (DFB) from
Costronic and
Schneider Sepam
Protection Relais.

The driver supports the protocol


"Modbus RTU" over a serial All PLCs
connection and over a TCP/IP supporting Modbus RTU -
connection and the protocol "Open Modbus RTU, serial, Open
Modbus RTU and
Modbus TCP" for TCP/IP Open Modbus Modbus TCP,
GE Multilin Open Modbus ZT-MODRTU32 A
TCP/IP or
Serial, Ethernet
Modbus RTU over 
TCP connection. The driver acts as a
Modbus Master. (For a Modbus Modbus TCP, Modbus
Slave please use the Process ASCII(seriell) ASCII - serial
Gateway)

Driver for fire alarm systems from Hekatron BMZ


Hekatron (www.hekatron.de). 340 fire alarm
Hekatron Hekatron driver ZT-HEKA32 A
system
Serial unknown 

Driver for 3964R/RK512 All PLCs


supporting
3963R/RK512;
e.g. Siemens
S5/S7 with
according CP or
CPU; Schleicher
3964R-RK512
Helmholz ZT-3964R32 A P03 via RK512. Serial 3964R/RK512 
driver
With Helmholz
Adapter
communication
with all PLCs with
MPI support
possible.

Driver for Hilscher Netlink Adapter Siemens S7-


(MPI -> TCP/IP) or Hilscher CIF-PB PLCs or
cards. The Netlink Adapter is also compatible PLCs
Hilscher MPI available identical in construction (e.g. VIPA) with Ethernet, PC Slot
Helmholz
driver
ZT-OPENMPI A from IBH and Helmholz. MPI interface. Card
MPI 
(http://www.hilscher.com) The PLC must be
MPI Master.

Driver for the MPI->HMI adapter Siemens S7-


from Siemens or Helmholz PLCs or
compatible PLCs
HMI adapter
Helmholz
driver
ZT-S7HMI A (e.g. VIPA) with Serial MPI  
S7 functions via
MPI.

For the serial communication via the


Siemens PC adapter / Helmholz PC
adapter to Siemens and Vipa PLCs Siemens S7
PC Adapter - Vipa ZT- with MPI interface. Alternativ: Serial 300/400 CPUs, all Siemens PC-
Helmholz
Green Cable S7PCADAPTER
A communication to Vipa PLCs via the VIPA CPUs Serial
Protocol  
Vipa Green Cable to the Vipa PD
interface.

Generic CIF driver for Interbus and


Profibus DP cards from Hilscher
(www.hilscher.com). The driver can All Profibus DP
Hilscher CIF be configured as master or as slave resp. Interbus bus Profibus DP,
Hilscher
driver
ZT-CIF32 A and communicates with the bus participants.
Bussystem
Interbus 
participants on the data level
without protocol.
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Driver for Hilscher Netlink Adapter Siemens S7-
(MPI -> TCP/IP) or Hilscher CIF-PB PLCs or
cards. The Netlink Adapter is also compatible PLCs
Hilscher MPI available identical in construction (e.g. VIPA) with Ethernet, PC Slot
Hilscher
driver
ZT-OPENMPI A from IBH and Helmholz. MPI interface. Card
MPI 
(http://www.hilscher.com) The PLC must be
MPI Master.

COMM-H driver (www.hitachi.com) All H-series


processors are
Hitachi Hitachi driver ZT-HITA A
supported.
Serial COM-H 

The Hydrometer driver connects to


IZAR Center (made by Hydrometer
GmbH). The IZAR Center connects
either M-Bus devices or Hydrometer Hydrometer-IZAR
radio receivers. The radio receivers Center
Hydrometer Hydrometer Driver ZT-Hydrometer B Serial, Ethernet M-Bus 
(M-Bus Receiver 868) are reading
remote devices in ist range.
(www.hydrometer.de)

Driver for Hilscher Netlink Adapter Siemens S7-


(MPI -> TCP/IP) or Hilscher CIF-PB PLCs or
cards. The Netlink Adapter is also compatible PLCs
Hilscher MPI available identical in construction (e.g. VIPA) with Ethernet, PC Slot
IBH
driver
ZT-OPENMPI A from IBH and Helmholz. MPI interface. Card
MPI 
(http://www.hilscher.com) The PLC must be
MPI Master.

The driver supports the Siemens S5 IBH Soft PLC S5


Driver for IBH Soft and S7 compatible Soft PLC from
IBH ZT-IBHRTSPS A and S7 Local unknown 
PLC IBH (www.IBHsoftec.de)

Open Modbus TCP/IP driver with


the following differences compared
to the standard Modbus driver: All controllers and
- TCP/IP channel bundling gateways
- improved communication with supporting Open
gateways Modbus TCP/IP.
- read and write only for holding Sequence of
register Events is only
- supports only Open Modbus available for
TCP/IPprotocol AREVA MiCOM
- Sequence of Events for AREVA P126/P127, GE
MiCOM 126/127, GE Multilin F650, Multilin F650, GE
GE Multilin UR-series, ICE NPx800, Multilin UR-series,
Modbus Energy Modbus RTU over
ICE ZT-MODBUS_E C Schneider MODICON TSX ICE NPI 800, ICE Ethernet 
driver TCP
Premium with COSTRONIC NPID 800 and
Software Schneider
MODICON TSX
www.areva-td.com, (Premium,M340,
www.gedigitalenergy.com, Quantum) with
www.groupeice.com, Function block
www.costronic.ch (DFB) from
Costronic and
Schneider Sepam
Protection Relais.

Driver for Idec MicroSmart,OpneNet Idec MicroSmart,


Controller and FC4A-HPC1. Idec OpenNet Idec
(www.idec.com)
Idec Idec driver ZT-IDEC A Controller, Idec Serial Communication  
FC4A -HPC1 Protocol

The driver uses a communication


protocol (SSCP) developed by
COPA-DATA. The protocol is used
for a spontaneous communication
via TCP/IP to IEC 61499 controls.
The protocol specification disclosed IEC 61499
IEC IEC 61499 driver ZT-IEC61499 C in the driver documentation and can compatible PLCs Ethernet SSCP  
be implemented easily for each
control.

Driver for read out of values from


energy meters. The driver uses IEC 62056-21 or
protocol A of IEC 62056-21 IEC 61107
IEC-62056-21 IEC 62056-21,
IEC
Driver
ZT-IEC62056 B specification. The driver supports compatible enrgy Serial, Ethernet
IEC 61107  
read only comunication. meter
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
The IEC61850 Client driver.
The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client IEC 61400-25-4
IEC 61400-25-4 ZT-IEC61400-25- services via TCP/IP (profile A1/T1). Annex C
IEC
Annex C 4-C
R The driver acts as Client (Master) compatible Server
Ethernet IEC 61850  
during comunication.
The driver supports Reporting
(unbuffered and buffered).

The IEC61850 Client driver.


The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client
services via TCP/IP (profile A1/T1). IEC 61850
IEC IEC 61850 driver ZT-IEC61850 R The driver acts as Client (Master) compatible PLCs Ethernet IEC 61850  
during communication.
The driver supports Reporting
(unbuffered and buffered).

Driver for the IEC 60870-5-101 PLCs supporting


(serial) and the IEC 60870-5-104 the IEC 60870-5-
IEC 60870-5- (TCP/IP) protocol; a Master 101 or the IEC IEC 60870-5-104,
IEC
101_104 driver
ZT-IEC870 C (controlling station) 60870-5-104
Serial, Ethernet
IEC 60870-5-101 
protocol.

Treiber für IEC60870 -5- 103 IEC60870-5-103


Serial,
IEC 60870 - 5 - communication compatible
IEC
103 Driver
ZT-IEC870-103 B
controls
Bussystem, IEC 60870-5-103  
Ethernet
H1 protocol driver for Siemens S5.
H1 resp. "Industrial Ethernet" is the
protocol name for the cellular
network, which is based on the 7-
layer-model of the ISO/OSI Siemens S5
Inat S5 H1 driver ZT-S5H1NT B Ethernet H1 
standard. (www.vipa.de,
www.siemens.de, www.inat.de). At
PC you need the PC H1 Driver from
INAT.

Driver for the S5 TCP/IP


communication. The driver Siemens S5,
supports polling (SEND/RECEIVE) Siemens S7 (only
and spontaneous communication with VIPA
Inat S5 TCP-IP driver ZT-S5TCP32 B (FETCH/WRITE). (www.vipa.de, CP443), Vipa
Ethernet TCP/IP 
www.siemens.de, www.inat.de, System 300
www.process-informatik.de)

Driver for S7 PLCs via MPI / H1 /


Profibus DP / TCP/IP. Based on the Siemens S7 Profibus DP, MPI,
S7 driver Softnet software SIMATIC NET (Softnet) 300/400 and other Ethernet, PC Slot TCP/IP -
Inat
based
ZT-S7NT B
compatible PLCs Card RFC1006, ISO 
from Siemens. (www.siemens.com)
8073

Driver for S7 TCP/IP connection via Siemens S7 200,


standard network card without 300, 400 and
additional software. The driver 1200 or VIPA TCP/IP -
Inat S7 TCP-IP driver ZT-S7TCP C
200V, 300V, 300S
Ethernet
RFC1006 
supports Simatic PDiag.
(www.siemens.com) and 500S

Generic CIF driver for Interbus and


Profibus DP cards from Hilscher
(www.hilscher.com). The driver can All Profibus DP
Hilscher CIF be configured as master or as slave resp. Interbus bus Profibus DP,
Interbus
driver
ZT-CIF32 A and communicates with the bus participants.
Bussystem
Interbus  
participants on the data level
without protocol.

Driver for the Keba / Hilscher PLCs with


Universal Bus Gatway CP001. according
CP001 Gateway Supports communication via interface and Profibus DP,
Interbus
driver
ZT-CP001 A
Expander
Serial
Interbus  
Profibus, Interbus usw.
program

Driver for Interbus S Generation 4, Interbus S


Based on Interbus PC cards from Generation 4 (I/O
Interbus Interbus S driver ZT-INTERNT A Phönic Contact communication)
Bussystem Interbus  
(www.phoenixcontact.com).

Driver for internal variables.


Variables can be local resp. global
Driver for internal and can be started with an initial -
Internal driver
variables
- - value or with the last value Local unknown  
(remanence). The driver does not
use up I/Os or TAGs.

zenon Mathematics driver. For


Driver for numerical and binary operations. -
Internal driver Mathematics - - The driver does not use up I/Os or Local unknown  
variable TAGs.
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
zenon Simulation driver for
Driver for simulation and internal variables.
Variables also can be saved -
Internal driver simulator - - Local unknown  
variables remant. The driver does not use up
I/Os or TAGs.

zenon System driver for displaying


internal project information, network
information, hardware information of
Driver for system the PC etc. The driver does not use -
Internal driver
variables
- - Local unknown  
up I/Os or TAGs.

Driver for Data Acquisition Boards DaqBoard/2000


Driver for series 2000 (www.iotech.com)
Iotech ZT-DAQ B series PC Slot Card unknown  
DaqBoard-2000

Driver for comminication to Jetter


PLCs via serial Interface, JETW ay,
PCPPLC, and via Ethernet All Jetter PLCs
Jetter Jetter Treiber ZT-JETTER B Serial, Ethernet Jetter  
UDP/TCP (JetIP/JetSTX)
www.jetter.de

The IEC61850 Client driver.


The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client IEC 61400-25-4
IEC 61400-25-4 ZT-IEC61400-25- services via TCP/IP (profile A1/T1). Annex C
Kalki
Annex C 4-C
R The driver acts as Client (Master) compatible Server
Ethernet IEC 61850  
during comunication.
The driver supports Reporting
(unbuffered and buffered).

The IEC61850 Client driver.


The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client
services via TCP/IP (profile A1/T1). IEC 61850
Kalki IEC 61850 driver ZT-IEC61850 R The driver acts as Client (Master) compatible PLCs Ethernet IEC 61850  
during communication.
The driver supports Reporting
(unbuffered and buffered).

Driver for the Keba / Hilscher PLCs with


Universal Bus Gatway CP001. according
CP001 Gateway Supports communication via interface and Profibus DP,
Keba
driver
ZT-CP001 A
Expander
Serial
Interbus  
Profibus, Interbus usw.
program

Driver for comunication with the


Kemro User ID USB Interface. The
driver can read out datat from Keba
Kemro User ID RFID Chips. The driver is only Kemro User ID
Keba
Driver
ZT-KEMROUID R USB unknown  
available from Keba directly in
combination with the hardware.
(www.keba.com)

Driver for the buttons on the Ketop T100 and


Driver for the
Keba
buttons /Ketop
ZT-KETOP A Ketop T100 and T50 T50 Local unknown  

Replaced BACnet driver. The driver


has been replaced by the BACnet All Bacnet
NG driver. "BACnet/IP,
ASHRAE compliant BACnet driver Annex J"
Bacnet and
Kieback + Peter
DDC4000 driver
ZT-BACNET C for "BACnet/IP, Annex J". The driver compliant PLCs; Ethernet BACnet/IP  
supports spontaneous data traffic. Kieback + Peter
www.bacnet.org DDC4000 PLCs

This driver comunicates to one or


more BACnet devices (BACnet-
Automation stations) using All PLCs with
BACnet driver BACnet/IP protocol. The connected BACnet/IP
Kieback + Peter
Next Generation
ZT-BACNETNG C BACnet devices have to be support.
Ethernet BACnet/IP  
operated as BACnet servers. The
driver implements only client
functionalities.

Driver for modules from the DDC centres;


Kieback + Peter company Kieback+Peter
Kieback + Peter
driver
ZT-KUP A DDC3xxx Serial P90  
(www.kieback-peter.de)

Driver for the SoftPLC openPLC Kirchner


from Kirchner. openPLC
Kirchnersoft LogiCAD driver ZT-LC32 A Local unknown  
(www.kirchnersoft.com) SoftPLC.

Driver for the communication with


the European Installation Bus (EIB / EIB/KNX capable
European KNX). In the Runtime the driver
KNX
Installation Bus
ZT-EIBV2_32 C stations Serial, Ethernet EIB Bus  
needs the Falcon Runtime.
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Driver for the Koyo Sequence Koyo Sequence
models (www.koyoele.co.jp/english) model series:
KOYO Sequence
Koyo
driver
ZT-KOYO B LOGIC, GE and Serial, Ethernet unknown  
Kostac S

Direct driver for all ProConOS All Control


based Controll systems from Systems from
Phoenix Contact. Phoenix Contact
W ww.phoenixcontact.com based on
ProConOS, e.g.
Inline Controller
Phoenix Contact (ILC),Remote
KW-Software
driver
ZT-PHOENIX32 B
Field Controller
Ethernet ProConOS 
(RFC) , PC-
Interface Cards
(FC) etc. except:
the serie 100 is
not supported.

Driver for comunication with devices


in packaging and process industry VDMAXML_P
using VDMAXML_P Protocoll e.g.: compatible PLCs
Laetus components. or devices;
Laetus VDMA-XML driver ZT-VDMA_XML B Www.vdma.org, www.laetus.com Laetus devices Ethernet VDMAXML_P 
with VDMA-XML
interface server.

Driver for PCS807 communication


box from Lauer for communication S5 or S7 PLC via
PCS807 Profibus via ProfibusDP. (www.systeme-
Lauer
DP driver
ZT-PCS80732 A Profibus-DP Serial Profibus DP 
lauer.de)

Driver for PCS812 communication Siemens S7-


box from Lauer for communication PLCs or
PCS812 S7 via MPI. (www.systeme-lauer.de) compatible PLCs
Lauer
connection
ZT-PCS812 A
(e.g. VIPA) with
Serial MPI 
MPI interface

Driver for the MPI-ISA card from Siemens S7300


Lauer for communication with a S7 /400 and
Lauer S7_MPIISA driver ZT-S7MPIISA A PLC. (www.lauer-systeme.de) compatible with PC Slot Card MPI 
MPI interface.

Driver for the communication with


LON nodes via iLon100 router from LON nodes
LON i-LON 100 driver ZT-LON100 C Echelon. (www.echelon.com) Ethernet Lon Bus  

Driver for the communication with LON nodes Ethernet, PC Slot


LON LON driver ZT-LON32 C LON nodes. Card
Lon Bus  

For XGT series PLC from LS


Industrial Systems. For Input and
LS Industrial Output, symbolic und direct XGT Series XGT dedicated
LSIS
Systems-XGT
ZT-LS_XGT B variables. Suppeort numerical data Ethernet
protocol 
types from 1 Bit up to 8 Byte
(eng.lsis.biz).

Driver for Panasonic (former


Matsushita) FPx PLCs Pansasonic
(www.panasonic-electric- (Matsushita)
Panasonic serial works.com). The driver also PLCs of the types
Matsushita
driver
ZT-MATSU32 A
FP0/FP1/FP3/FP
Serial unknown  
supports modem connection.
10SH/FP-M/FP2

TCP/IP driver for Matsushita FPx


PLCs via standard network card. Matsushita PLCs
(www.matsushita.de) of the types
Matsushita TCP-
Matsushita
IP driver
ZT-MATSUTCP A FP0/FP1/FP3/FP Ethernet TCP/IP 
10SH/FP-M/FP2

Driver for the standard M-Bus


Standard M-Bus M-Bus slaves
M-Bus
driver
ZT-MBUS32 B protocol. Serial M-Bus 

Driver for Mitsubishi A and Q series. Supports CPUs of


Mitsubishi - (http://www.meau.com) the AnS/AnA and Melsec A, Melsec
Mitsubishi
Melsec A-Q driver
ZT-MITSUB A
Q series.
Serial, Ethernet
Q  

Driver for Mitsubishi FX series. Mitsubishi FX-


Mitsubishi -
Mitsubishi
Melsec FX driver
ZT-MITFX A (http://www.meau.com) 32MR Serial, Ethernet Melsec FX 

Driver for all Applicom interface All PLCs, which


cards, which support MPI or support MPI resp.
Modbus Plus Applicom driver ZT-APPL B Modbus Plus. (http:\\www.applicom- Modbus Plus
Bussystem MPI, Modbus Plus  
int.com)
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Open Modbus TCP/IP driver with
the following differences compared
to the standard Modbus driver: All controllers and
- TCP/IP channel bundling gateways
- improved communication with supporting Open
gateways Modbus TCP/IP.
- read and write only for holding Sequence of
register Events is only
- supports only Open Modbus available for
TCP/IPprotocol AREVA MiCOM
- Sequence of Events for AREVA P126/P127, GE
MiCOM 126/127, GE Multilin F650, Multilin F650, GE
GE Multilin UR-series, ICE NPx800, Multilin UR-series,
Modbus Energy Modbus RTU over
Modbus RTU
driver
ZT-MODBUS_E C Schneider MODICON TSX ICE NPI 800, ICE Ethernet
TCP  
Premium with COSTRONIC NPID 800 and
Software Schneider
MODICON TSX
www.areva-td.com, (Premium,M340,
www.gedigitalenergy.com, Quantum) with
www.groupeice.com, Function block
www.costronic.ch (DFB) from
Costronic and
Schneider Sepam
Protection Relais.

The driver supports the protocol


"Modbus RTU" over a serial All PLCs
connection and over a TCP/IP supporting Modbus RTU -
connection and the protocol "Open Modbus RTU, serial, Open
Modbus RTU and
Modbus TCP" for TCP/IP Open Modbus Modbus TCP,
Modbus RTU Open Modbus ZT-MODRTU32 A
TCP/IP or
Serial, Ethernet
Modbus RTU over 
TCP connection. The driver acts as a
Modbus Master. (For a Modbus Modbus TCP, Modbus
Slave please use the Process ASCII(seriell) ASCII - serial
Gateway)

The driver waits on a TCP/IP port, Any Modbus


until the Brodersen Gateway PLCs that can be
establishes a GPRS connection. connected via the
Passive Modbus Then it communicates via Modbus Modbus RTU over
Modbus RTU
RTU driver
ZT-MODLISTEN R Brodersen UCM- Ethernet
TCP 
RTU. (www.brodersencontrols.com) 97 GPRS-
Gateway.

Connection to Modicon TSX PLC


Modicon TSX via Unitelway protocol. Modicon TSX
Modicon
Micro driver
ZT-MODICON A Serial Unitelway 
(www.schneider-electric.de)

PDNet from the company Apex Schneider


(www.apex.de), PDnet stands for Modicon PLCs:
Process Data Transport Net and in TSX Compact
the lower communication levels is A120, TSX
based on Arcnet. Compact Micro,
TSX A250, A350,
A500, TSX
Bussystem,
PDNet PCI - Quantum. ABB
Modicon
driver
ZT-PADNETPCI A
Protronic PLCs:
Coaxialcable PDNet  
RG62/U
T200, CS31,
AC31. Siemens
PLCs: S5-115U,
S5-135U, S5-
155U, S7-300, S7-
400

Codesys Soft PLC driver for the Codesys Soft


Codesys SoftPLC standard Codesys RT interface PLC and Elau
Moeller
driver
ZT-3S32 A
Max 4
Ethernet, Local 3S-Gateway  
(Coedsys Gateway Server)

Replaced Codesys Soft PLC driver Codesys Soft


for the Codesys 3S-ARTI interface. PLCs, Moeller
The driver was replaced by the XControl PLCs
Codesys Arti NG Treiber driver. XC200 and
Codesys Arti XC600, and Elau
Moeller
SoftPLC driver
ZT-3S32_ARTI A
PacDrive
Ethernet, Local 3S-Arti 
Controller MAX 4,
C200, C400,
C600, P600.

Codesys Soft PLC driver "New Codesys Soft


Generation" for the Codesys 3S- PLCs, Moeller
ARTI (Asynchron Runtime XControl PLCs
Interface) interface. The driver XC200 and
Codesys Arti NG supports direct variable import from XC600, and Elau
Moeller
SoftPLC driver
ZT-3S_ARTI_NG A
PacDrive
Ethernet, Local 3S-Arti 
the Codesys development
environment and replaces the Controller MAX 4,
Codesys Arti Soft PLC driver. C200, C400,
C600, P600.
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Developed for special Moeller Profibus DP
Profibus DP participant. Also can Slaves (Only
communicate with other passive participants,
Profibus DP
Moeller
Master driver
ZT-DPUNI32 C Profibus DP participants. Better which need no PC Slot Card Profibus DP 
alternative: straton with Profibus DP own
driver. configuration)

Driver for Klöckner+Moeller PLCs. PS306, PS316,


(www.moeller.net) PS416, PS4-100,
PS4-200,
Moeller Electric PS3/PS4-100 via
Moeller
PSUNI driver
ZT-PSUNI32 A
ZB4-501-UM1 to
Serial Sucom A 
PS4-200 via ZB4-
303-KB1

Mininet Master driver for B+R PLCs B+R Minicontrol


Mininet-Master (www.br-automation.com) and B+R System
Mondial
driver
ZT-MINI32 A
2000
Serial Mininet  

Open Modbus TCP/IP driver with


the following differences compared
to the standard Modbus driver: All controllers and
- TCP/IP channel bundling gateways
- improved communication with supporting Open
gateways Modbus TCP/IP.
- read and write only for holding Sequence of
register Events is only
- supports only Open Modbus available for
TCP/IPprotocol AREVA MiCOM
- Sequence of Events for AREVA P126/P127, GE
MiCOM 126/127, GE Multilin F650, Multilin F650, GE
GE Multilin UR-series, ICE NPx800, Multilin UR-series,
Modbus Energy Modbus RTU over
Mondial
driver
ZT-MODBUS_E C Schneider MODICON TSX ICE NPI 800, ICE Ethernet
TCP  
Premium with COSTRONIC NPID 800 and
Software Schneider
MODICON TSX
www.areva-td.com, (Premium,M340,
www.gedigitalenergy.com, Quantum) with
www.groupeice.com, Function block
www.costronic.ch (DFB) from
Costronic and
Schneider Sepam
Protection Relais.

The driver supports the protocol


"Modbus RTU" over a serial All PLCs
connection and over a TCP/IP supporting Modbus RTU -
connection and the protocol "Open Modbus RTU, serial, Open
Modbus RTU and
Modbus TCP" for TCP/IP Open Modbus Modbus TCP,
Mondial Open Modbus ZT-MODRTU32 A
TCP/IP or
Serial, Ethernet
Modbus RTU over  
TCP connection. The driver acts as a
Modbus Master. (For a Modbus Modbus TCP, Modbus
Slave please use the Process ASCII(seriell) ASCII - serial
Gateway)

Driver for 3964R/RK512 All PLCs


supporting
3963R/RK512;
e.g. Siemens
S5/S7 with
according CP or
CPU; Schleicher
3964R-RK512
MPI
driver
ZT-3964R32 A P03 via RK512. Serial 3964R/RK512  
With Helmholz
Adapter
communication
with all PLCs with
MPI support
possible.

Driver for all Applicom interface All PLCs, which


cards, which support MPI or support MPI resp.
MPI Applicom driver ZT-APPL B Modbus Plus. (http:\\www.applicom- Modbus Plus
Bussystem MPI, Modbus Plus  
int.com)

Driver for MPI Siemens CE platform Siemens S7300


S7 MPI for (http://www.open-platform- /400 and
program.com/products/default.asp)
MPI Siemens CE ZT-MPI A compatible with Bussystem MPI  
terminals MPI interface.

Driver for Hilscher Netlink Adapter Siemens S7-


(MPI -> TCP/IP) or Hilscher CIF-PB PLCs or
cards. The Netlink Adapter is also compatible PLCs
Hilscher MPI available identical in construction (e.g. VIPA) with Ethernet, PC Slot
MPI
driver
ZT-OPENMPI A from IBH and Helmholz. MPI interface. Card
MPI  
(http://www.hilscher.com) The PLC must be
MPI Master.
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Driver for ESA W indows CE Siemens S7-
terminal including ESA PCI CIB PLCs or
communication card for W indows compatible PLCs
Driver for ESA CE for the communication with
MPI
PCI CIB
ZT-ESA32 A (e.g. Vipa) with Local MPI  
PLCs supporting MPI. S7 functions via
MPI.

Driver for the MPI->HMI adapter Siemens S7-


from Siemens or Helmholz PLCs or
compatible PLCs
HMI adapter
MPI
driver
ZT-S7HMI A (e.g. VIPA) with Serial MPI  
S7 functions via
MPI.

Driver for PCS812 communication Siemens S7-


box from Lauer for communication PLCs or
PCS812 S7 via MPI. (www.systeme-lauer.de) compatible PLCs
MPI
connection
ZT-PCS812 A
(e.g. VIPA) with
Serial MPI  
MPI interface

Driver for the MPI-ISA card from Siemens S7300


Lauer for communication with a S7 /400 and
MPI S7_MPIISA driver ZT-S7MPIISA A PLC. (www.lauer-systeme.de) compatible with PC Slot Card MPI  
MPI interface.

Driver for S7 PLCs via MPI / H1 /


Profibus DP / TCP/IP. Based on the Siemens S7 Profibus DP, MPI,
S7 driver Softnet software SIMATIC NET (Softnet) 300/400 and other Ethernet, PC Slot TCP/IP -
MPI
based
ZT-S7NT B
compatible PLCs Card RFC1006, ISO  
from Siemens. (www.siemens.com)
8073

For the serial communication via the


Siemens PC adapter / Helmholz PC
adapter to Siemens and Vipa PLCs Siemens S7
PC Adapter - Vipa ZT- with MPI interface. Alternativ: Serial 300/400 CPUs, all Siemens PC-
MPI
Green Cable S7PCADAPTER
A communication to Vipa PLCs via the VIPA CPUs Serial
Protocol  
Vipa Green Cable to the Vipa PD
interface.

Driver for the communication via a Siemens S7 and


MPI net throuh a SST Interface other PLCs
MPI SST Driver ZT-SST A
supporting MPI
PC Slot Card MPI  
Card. (www.mysst.com)

Driver for communication with VIPA Siemens S7-


Windows CE Touch Panel with PLCs or
integrated S7-Chip for PLC compatible PLCs
Driver for VIPA connected trough MPI.
MPI
CE touchpanel
ZT-VIPA32 A (eg. Vipa) with " Bussystem, Local MPI  
S7 functions" over
MPI.

Driver for Omron SYSMAC. FINS =


Factory Information Network OMRON
Omron FINS
Omron
driver
ZT-OMRONFINS A System (www.europe.omron.com) SYSMAC Serial, Ethernet Omron FINS  

Driver for Omron PLCs C200H Series


(www.europe.omron.com) (C200HX,
C200HG,
Omron OMRON driver ZT-OMRON32 A
C200HE), C500,
Serial Omron Host Link  
C1000, C2000

Driver for the communication with The OPC Server


OPC Servers. must have
implemented the
interface in the
OPC Client V2-0
OPC
driver
ZT-OPCCLI32 A version 1.0A or Local OPC  
2.0x
Browsing is
supported.

Driver for comunication with all OPC All OPC-UA


UA (Unified Architecture) servers. server with Data
OPC UA Client The driver supports only Data
OPC
driver
ZT-OPCUA B Access Ethernet, Local OPC-UA  
Access (DA). comunication
www.opcfoundation.org

Driver for OSAI Soft PLC/CNC OSAI Soft


OSAI TCP/IP based on W indows CE.
OSAI
driver
ZT-OSAI A PLC/CNC Ethernet Osai W inNBI  
(www.osai.it)

Driver for the connection to an Otis


Driver for Otis controller (Lift control). The driver -
Otis
controller
ZT-OTIS B only supports reading access. Serial Otis Protokoll  
(www.otis.com)
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Driver for Panasonic (former
Matsushita) FPx PLCs Pansasonic
(www.panasonic-electric- (Matsushita)
Panasonic serial works.com). The driver also PLCs of the types
Panasonic
driver
ZT-MATSU32 A
FP0/FP1/FP3/FP
Serial unknown  
supports modem connection.
10SH/FP-M/FP2

TCP/IP driver for Matsushita FPx


PLCs via standard network card. Matsushita PLCs
(www.matsushita.de) of the types
Matsushita TCP-
Panasonic
IP driver
ZT-MATSUTCP A FP0/FP1/FP3/FP Ethernet TCP/IP  
10SH/FP-M/FP2

PDNet from the company Apex Schneider


(www.apex.de), PDnet stands for Modicon PLCs:
Process Data Transport Net and in TSX Compact
the lower communication levels is A120, TSX
based on Arcnet. Compact Micro,
TSX A250, A350,
A500, TSX
Bussystem,
PDNet PCI - Quantum. ABB
PDNet
driver
ZT-PADNETPCI A
Protronic PLCs:
Coaxialcable PDNet  
RG62/U
T200, CS31,
AC31. Siemens
PLCs: S5-115U,
S5-135U, S5-
155U, S7-300, S7-
400

Driver for Interbus S Generation 4, Interbus S


Based on Interbus PC cards from Generation 4 (I/O
Phoenix Contact Interbus S driver ZT-INTERNT A Phönic Contact communication)
Bussystem Interbus  
(www.phoenixcontact.com).

Direct driver for all ProConOS All Control


based Controll systems from Systems from
Phoenix Contact. Phoenix Contact
W ww.phoenixcontact.com based on
ProConOS, e.g.
Inline Controller
Phoenix Contact (ILC),Remote
Phoenix Contact
driver
ZT-PHOENIX32 B
Field Controller
Ethernet ProConOS  
(RFC) , PC-
Interface Cards
(FC) etc. except:
the serie 100 is
not supported.

Driver for Pilz-PSS PLCs for ST


area, FS area is not supported. PSS PLCs
Pilz PILZ-PSS driver ZT-PSS32 A Serial PSS PG  
(www.pilz.com)

Driver for the S5 TCP/IP


communication. The driver Siemens S5,
supports polling (SEND/RECEIVE) Siemens S7 (only
Process- and spontaneous communication with VIPA
Informatik
S5 TCP-IP driver ZT-S5TCP32 B (FETCH/WRITE). (www.vipa.de, CP443), Vipa
Ethernet TCP/IP  
www.siemens.de, www.inat.de, System 300
www.process-informatik.de)

Driver for S7 PLCs via MPI / H1 /


Profibus DP / TCP/IP. Based on the Siemens S7 Profibus DP, MPI,
Process- S7 driver Softnet software SIMATIC NET (Softnet) 300/400 and other Ethernet, PC Slot TCP/IP -
Informatik based
ZT-S7NT B
compatible PLCs Card RFC1006, ISO  
from Siemens. (www.siemens.com)
8073

Driver for S7 TCP/IP connection via Siemens S7 200,


standard network card without 300, 400 and
Process- additional software. The driver 1200 or VIPA TCP/IP -
Informatik
S7 TCP-IP driver ZT-S7TCP C
200V, 300V, 300S
Ethernet
RFC1006  
supports Simatic PDiag.
(www.siemens.com) and 500S

Generic CIF driver for Interbus and


Profibus DP cards from Hilscher
(www.hilscher.com). The driver can All Profibus DP
Hilscher CIF be configured as master or as slave resp. Interbus bus Profibus DP,
Profibus DP
driver
ZT-CIF32 A and communicates with the bus participants.
Bussystem
Interbus  
participants on the data level
without protocol.

Driver for the Keba / Hilscher PLCs with


Universal Bus Gatway CP001. according
CP001 Gateway Supports communication via interface and Profibus DP,
Profibus DP
driver
ZT-CP001 A
Expander
Serial
Interbus 
Profibus, Interbus usw.
program
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Developed for special Moeller Profibus DP
Profibus DP participant. Also can Slaves (Only
communicate with other passive participants,
Profibus DP
Profibus DP
Master driver
ZT-DPUNI32 C Profibus DP participants. Better which need no PC Slot Card Profibus DP 
alternative: straton with Profibus DP own
driver. configuration)

Driver for PCS807 communication


box from Lauer for communication S5 or S7 PLC via
PCS807 Profibus via ProfibusDP. (www.systeme-
Profibus DP
DP driver
ZT-PCS80732 A Profibus-DP Serial Profibus DP  
lauer.de)

Driver for S7 PLCs via MPI / H1 /


Profibus DP / TCP/IP. Based on the Siemens S7 Profibus DP, MPI,
S7 driver Softnet software SIMATIC NET (Softnet) 300/400 and other Ethernet, PC Slot TCP/IP -
Profibus DP
based
ZT-S7NT B
compatible PLCs Card RFC1006, ISO  
from Siemens. (www.siemens.com)
8073

Profibus FMS driver. Based on the PLCs with


FMS with PC card software SIMATIC NET (Softnet) Profibus FMS
Profibus FMS
from Siemens
ZT-FMSNT C from Siemens. (www.siemens.com) assembly group
PC Slot Card Profibus FMS  

Driver for robots of Reis Robotics


Reis Robotics (www.reisrobotics.com) Reis RS IV
Reis
driver
ZT-REIS32 A Serial Reis RS IV  

Supports all connections which are Allen Bradley PLC


available with RS Linx DataHighway
types: PLC2,
(http://www.software.rockwell.com) Serial, Plus, DeviceNet,
Allen Bradley RS- PLC3, PLC5,
Rockwell
Linx driver
ZT-ALLENBNT A
PLC5250,
Bussystem, DataHighway,  
Ethernet DF1, TCP/IP,
SLC500;
ControlNet

For all Allen Bradley PLCs All Allen Bradley


Allen Bradley DF1- supporting DF1. The driver works PLCs with DF1
Rockwell ZT-ALLENDF1 A Serial DF1  
driver half duplex interface

Ethernet/IP driver for


communication via Common
Industrial Protocol - CIP from Open
DeviceNet Vendor Organisation
(ODVA) with Allen-Bradley Logix Allen-Bradley
PLCs. The driver supports direct ControlLogix,
browsing of variables from the PLC, EtherNet/IP,
Allen-Bradley CompactLogix
Rockwell
ODVA driver
ZT-LOGIX_ODVA C offline browsing from projectfile and MicroLogix
Ethernet Common 
(*.L5K) and blockread/write for all Industrial Protocol
PLCs
datatypes including structures and
arrays.

W ww.ab.com

Driver for serial comunication with a


System 9000TS Sequence of
Events Recorder or a Series 725B System 9000TS
Combined Annunciator and Event
RTKInstruments RTK9000 driver ZT-RTK9000 B and Series 725B Serial RTKAMS 
Recorder from RTK Instruments
(www.rtkinstruments.com)

Driver for direct SAIA SBUS:


PCD1.MXXX;
communication via PGU,SBUS,
PCD2.MXXX;
P800 and TCP, but not via modem.
PCD3MXXX;
No SAIA software needed.
PCD4.MXXX;
(www.saia-burgess.com)
PCD6.MXXX;
PCS1.CXXX
TCP/IP:
PCD1.M130 with
PCD7.F650
module;
Saia Directly PCD2.M150 with TCP/IP, SAIA S-
Saia
driver
ZT-SADIR A
PCD7.F650
Serial, Ethernet
Bus, SAIA P800 
module;
PCD2.M170 with
PCD7.F650
module;
PCD4.M170 with
PCD7.F650
module;
PCD6.M300 with
PCD7.F651
module; PCD3
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Driver for PGU,SBUS, P800, SBUS:
PCD1.MXXX;
modem, TCP. Whereby
PCD2.MXXX;
communication via TCP is possible
PCD4.MXXX;
with one PLC per driver. (www.saia-
PCD3MXXX;
burgess.com)
PCD6.MXXX;
PCS1.CXXX
TCP/IP:
PCD1.M130 with
PCD7.F650
module;
SAIA2ND32 PCD2.M150 with TCP/IP, SAIA S-
Saia
driver
ZT-SATCP B
PCD7.F650
Serial, Ethernet
Bus, SAIA P800 
module;
PCD2.M170 with
PCD7.F650
module;
PCD4.M170 with
PCD7.F650
module;
PCD6.M300 with
PCD7.F651
module
The IEC61850 Client driver.
The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client IEC 61400-25-4
IEC 61400-25-4 ZT-IEC61400-25- services via TCP/IP (profile A1/T1). Annex C
SAT
Annex C 4-C
R The driver acts as Client (Master) compatible Server
Ethernet IEC 61850 
during comunication.
The driver supports Reporting
(unbuffered and buffered).

The IEC61850 Client driver.


The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client
services via TCP/IP (profile A1/T1). IEC 61850
SAT IEC 61850 driver ZT-IEC61850 R The driver acts as Client (Master) compatible PLCs Ethernet IEC 61850 
during communication.
The driver supports Reporting
(unbuffered and buffered).

Driver for the IEC 60870-5-101 PLCs supporting


(serial) and the IEC 60870-5-104 the IEC 60870-5-
IEC 60870-5- (TCP/IP) protocol; a Master 101 or the IEC IEC 60870-5-104,
SAT
101_104 driver
ZT-IEC870 C (controlling station) 60870-5-104
Serial, Ethernet
IEC 60870-5-101  
protocol.

Driver for 3964R/RK512 All PLCs


supporting
3963R/RK512;
e.g. Siemens
S5/S7 with
according CP or
CPU; Schleicher
3964R-RK512
Sauter
driver
ZT-3964R32 A P03 via RK512. Serial 3964R/RK512  
With Helmholz
Adapter
communication
with all PLCs with
MPI support
possible.
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Open Modbus TCP/IP driver with
the following differences compared
to the standard Modbus driver: All controllers and
- TCP/IP channel bundling gateways
- improved communication with supporting Open
gateways Modbus TCP/IP.
- read and write only for holding Sequence of
register Events is only
- supports only Open Modbus available for
TCP/IPprotocol AREVA MiCOM
- Sequence of Events for AREVA P126/P127, GE
MiCOM 126/127, GE Multilin F650, Multilin F650, GE
GE Multilin UR-series, ICE NPx800, Multilin UR-series,
Modbus Energy Modbus RTU over
Schiele
driver
ZT-MODBUS_E C Schneider MODICON TSX ICE NPI 800, ICE Ethernet
TCP  
Premium with COSTRONIC NPID 800 and
Software Schneider
MODICON TSX
www.areva-td.com, (Premium,M340,
www.gedigitalenergy.com, Quantum) with
www.groupeice.com, Function block
www.costronic.ch (DFB) from
Costronic and
Schneider Sepam
Protection Relais.

The driver supports the protocol


"Modbus RTU" over a serial All PLCs
connection and over a TCP/IP supporting Modbus RTU -
connection and the protocol "Open Modbus RTU, serial, Open
Modbus RTU and
Modbus TCP" for TCP/IP Open Modbus Modbus TCP,
Schiele Open Modbus ZT-MODRTU32 A
TCP/IP or
Serial, Ethernet
Modbus RTU over  
TCP connection. The driver acts as a
Modbus Master. (For a Modbus Modbus TCP, Modbus
Slave please use the Process ASCII(seriell) ASCII - serial
Gateway)

Driver for Systron S400 Schiele Systron


Schiele S400
Schiele
driver
ZT-S432 A S400 Serial unknown  

Driver for Systron S800 Schieles Systron


Schiele S800
Schiele
driver
ZT-S80032 A S800 Serial unknown  

Driver for 3964R/RK512 All PLCs


supporting
3963R/RK512;
e.g. Siemens
S5/S7 with
according CP or
CPU; Schleicher
3964R-RK512
Schleicher
driver
ZT-3964R32 A P03 via RK512. Serial 3964R/RK512  
With Helmholz
Adapter
communication
with all PLCs with
MPI support
possible.

Driver for all Applicom interface All PLCs, which


cards, which support MPI or support MPI resp.
Schneider Applicom driver ZT-APPL B Modbus Plus. (http:\\www.applicom- Modbus Plus
Bussystem MPI, Modbus Plus 
int.com)

Open Modbus TCP/IP driver with


the following differences compared
to the standard Modbus driver: All controllers and
- TCP/IP channel bundling gateways
- improved communication with supporting Open
gateways Modbus TCP/IP.
- read and write only for holding Sequence of
register Events is only
- supports only Open Modbus available for
TCP/IPprotocol AREVA MiCOM
- Sequence of Events for AREVA P126/P127, GE
MiCOM 126/127, GE Multilin F650, Multilin F650, GE
GE Multilin UR-series, ICE NPx800, Multilin UR-series,
Modbus Energy Modbus RTU over
Schneider
driver
ZT-MODBUS_E C Schneider MODICON TSX ICE NPI 800, ICE Ethernet
TCP 
Premium with COSTRONIC NPID 800 and
Software Schneider
MODICON TSX
www.areva-td.com, (Premium,M340,
www.gedigitalenergy.com, Quantum) with
www.groupeice.com, Function block
www.costronic.ch (DFB) from
Costronic and
Schneider Sepam
Protection Relais.
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Connection to Modicon TSX PLC
Modicon TSX via Unitelway protocol. Modicon TSX
Schneider ZT-MODICON A Serial Unitelway  
Micro driver (www.schneider-electric.de)

The driver supports the protocol


"Modbus RTU" over a serial All PLCs
connection and over a TCP/IP supporting Modbus RTU -
connection and the protocol "Open Modbus RTU, serial, Open
Modbus RTU and
Modbus TCP" for TCP/IP Open Modbus Modbus TCP,
Schneider Open Modbus ZT-MODRTU32 A
TCP/IP or
Serial, Ethernet
Modbus RTU over  
TCP connection. The driver acts as a
Modbus Master. (For a Modbus Modbus TCP, Modbus
Slave please use the Process ASCII(seriell) ASCII - serial
Gateway)

PDNet from the company Apex Schneider


(www.apex.de), PDnet stands for Modicon PLCs:
Process Data Transport Net and in TSX Compact
the lower communication levels is A120, TSX
based on Arcnet. Compact Micro,
TSX A250, A350,
A500, TSX
Bussystem,
PDNet PCI - Quantum. ABB
Schneider
driver
ZT-PADNETPCI A
Protronic PLCs:
Coaxialcable PDNet  
RG62/U
T200, CS31,
AC31. Siemens
PLCs: S5-115U,
S5-135U, S5-
155U, S7-300, S7-
400

Driver for the connection to


products of SE-Elektronic. (www.se- A, B and C- bus
Driver for SE- elektronic.de). The driver supports devices of SE
SE Elektronic
Elektronic
ZT-SE_32 R
Elektronic
Serial unknown 
A, B and C devices

Driver for 3964R/RK512 All PLCs


supporting
3963R/RK512;
e.g. Siemens
S5/S7 with
according CP or
CPU; Schleicher
3964R-RK512
Siemens
driver
ZT-3964R32 A P03 via RK512. Serial 3964R/RK512 
With Helmholz
Adapter
communication
with all PLCs with
MPI support
possible.

Driver for all Applicom interface All PLCs, which


cards, which support MPI or support MPI resp.
Siemens Applicom driver ZT-APPL B Modbus Plus. (http:\\www.applicom- Modbus Plus
Bussystem MPI, Modbus Plus  
int.com)

This driver comunicates to one or


more BACnet devices (BACnet-
Automation stations) using All PLCs with
BACnet driver BACnet/IP protocol. The connected BACnet/IP
Siemens
Next Generation
ZT-BACNETNG C BACnet devices have to be support.
Ethernet BACnet/IP 
operated as BACnet servers. The
driver implements only client
functionalities.

Driver for MPI Siemens CE platform Siemens S7300


S7 MPI for (http://www.open-platform- /400 and
program.com/products/default.asp)
Siemens Siemens CE ZT-MPI A compatible with Bussystem MPI 
terminals MPI interface.

Driver for Hilscher Netlink Adapter Siemens S7-


(MPI -> TCP/IP) or Hilscher CIF-PB PLCs or
cards. The Netlink Adapter is also compatible PLCs
Hilscher MPI available identical in construction (e.g. VIPA) with Ethernet, PC Slot
Siemens
driver
ZT-OPENMPI A from IBH and Helmholz. MPI interface. Card
MPI 
(http://www.hilscher.com) The PLC must be
MPI Master.

Driver for CTI PLCs,, Texas


Instruments TI 505 PLCs or Simatic CTI PLCs, Ti505,
545/555 PLCs. The driver support Simatic 545,
Siemens CTI driver ZT-CTI B the protocols CAMP and NITP with Simatic 555
Ethernet NITP, CAMP  
Packed Task Codes.

Driver for ESA W indows CE Siemens S7-


terminal including ESA PCI CIB PLCs or
communication card for W indows compatible PLCs
Driver for ESA CE for the communication with
Siemens
PCI CIB
ZT-ESA32 A (e.g. Vipa) with Local MPI 
PLCs supporting MPI. S7 functions via
MPI.
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Profibus FMS driver. Based on the PLCs with
software SIMATIC NET (Softnet) Profibus FMS
FMS with PC card
Siemens
from Siemens
ZT-FMSNT C from Siemens. (www.siemens.com) assembly group
PC Slot Card Profibus FMS 

Driver for the MPI->HMI adapter Siemens S7-


from Siemens or Helmholz PLCs or
compatible PLCs
HMI adapter
Siemens
driver
ZT-S7HMI A (e.g. VIPA) with Serial MPI 
S7 functions via
MPI.

Driver for read out of values from


energy meters. The driver uses IEC 62056-21 or
protocol A of IEC 62056-21 IEC 61107
IEC-62056-21 IEC 62056-21,
Siemens
Driver
ZT-IEC62056 B specification. The driver supports compatible enrgy Serial, Ethernet
IEC 61107 
read only comunication. meter

The IEC61850 Client driver.


The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client IEC 61400-25-4
IEC 61400-25-4 ZT-IEC61400-25- services via TCP/IP (profile A1/T1). Annex C
Siemens
Annex C 4-C
R The driver acts as Client (Master) compatible Server
Ethernet IEC 61850  
during comunication.
The driver supports Reporting
(unbuffered and buffered).

The IEC61850 Client driver.


The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client
services via TCP/IP (profile A1/T1). IEC 61850
Siemens IEC 61850 driver ZT-IEC61850 R The driver acts as Client (Master) compatible PLCs Ethernet IEC 61850
during communication.
The driver supports Reporting
(unbuffered and buffered).

Driver for the IEC 60870-5-101 PLCs supporting


(serial) and the IEC 60870-5-104 the IEC 60870-5-
IEC 60870-5- (TCP/IP) protocol; a Master 101 or the IEC IEC 60870-5-104,
Siemens ZT-IEC870 C (controlling station) Serial, Ethernet
101_104 driver 60870-5-104 IEC 60870-5-101
protocol.

PDNet from the company Apex Schneider


(www.apex.de), PDnet stands for Modicon PLCs:
Process Data Transport Net and in TSX Compact
the lower communication levels is A120, TSX
based on Arcnet. Compact Micro,
TSX A250, A350,
A500, TSX
Bussystem,
PDNet PCI - Quantum. ABB
Siemens ZT-PADNETPCI A Coaxialcable PDNet
driver Protronic PLCs:
RG62/U
T200, CS31,
AC31. Siemens
PLCs: S5-115U,
S5-135U, S5-
155U, S7-300, S7-
400

Driver for PCS807 communication


box from Lauer for communication S5 or S7 PLC via
PCS807 Profibus via ProfibusDP. (www.systeme-
Siemens ZT-PCS80732 A Profibus-DP Serial Profibus DP 
DP driver lauer.de)

Driver for PCS812 communication Siemens S7-


box from Lauer for communication PLCs or
PCS812 S7 via MPI. (www.systeme-lauer.de) compatible PLCs
Siemens
connection
ZT-PCS812 A
(e.g. VIPA) with
Serial MPI 
MPI interface

H1 protocol driver for Siemens S5.


H1 resp. "Industrial Ethernet" is the
protocol name for the cellular
network, which is based on the 7-
layer-model of the ISO/OSI Siemens S5
Siemens S5 H1 driver ZT-S5H1NT B Ethernet H1 
standard. (www.vipa.de,
www.siemens.de, www.inat.de). At
PC you need the PC H1 Driver from
INAT.

Driver for the programming


interface of the Simatic S5 from Siemens Simatic
Siemens S5 PD
Siemens
driver
ZT-S5PG32 A Siemens with AS 511 protocol. S5 Serial AS 511 
(www.siemens.com)
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Driver for the S5 TCP/IP
communication. The driver Siemens S5,
supports polling (SEND/RECEIVE) Siemens S7 (only
and spontaneous communication with VIPA
Siemens S5 TCP-IP driver ZT-S5TCP32 B (FETCH/WRITE). (www.vipa.de, CP443), Vipa
Ethernet TCP/IP 
www.siemens.de, www.inat.de, System 300
www.process-informatik.de)

Connection to Siemens S7 200 Siemens S7 CPU-


S7 driver for S7-
Siemens
200
ZT-S7PPI200 A PLCs 212 Serial PPI 

Driver for the MPI-ISA card from Siemens S7300


Lauer for communication with a S7 /400 and
Siemens S7_MPIISA driver ZT-S7MPIISA A PLC. (www.lauer-systeme.de) compatible with PC Slot Card MPI 
MPI interface.

Driver for S7 PLCs via MPI / H1 /


Profibus DP / TCP/IP. Based on the Siemens S7 Profibus DP, MPI,
S7 driver Softnet software SIMATIC NET (Softnet) 300/400 and other Ethernet, PC Slot TCP/IP -
Siemens
based
ZT-S7NT B
compatible PLCs Card RFC1006, ISO 
from Siemens. (www.siemens.com)
8073

Driver for the communication with a Software PLC


Siemens Soft PLC (WINAC). WinAC or
(www.siemens.com) SlotPLCW inAC
Siemens WINAC driver ZT-S7AC41x32 B
Pro or W inAC Pro
Local unknown  
Lite from Siemens

Driver for communication with


Siclimat X Building Automation S7-300, S7400,
Siemens Siclimat X Decos ZT-S7DCOS R Unknown unknown  
System, Siemens AG

For the serial communication via the


Siemens PC adapter / Helmholz PC
adapter to Siemens and Vipa PLCs Siemens S7
PC Adapter - Vipa ZT- with MPI interface. Alternativ: Serial 300/400 CPUs, all Siemens PC-
Siemens
Green Cable S7PCADAPTER
A communication to Vipa PLCs via the VIPA CPUs Serial
Protocol  
Vipa Green Cable to the Vipa PD
interface.

Driver for S7 TCP/IP connection via Siemens S7 200,


standard network card without 300, 400 and
additional software. The driver 1200 or VIPA TCP/IP -
Siemens S7 TCP-IP driver ZT-S7TCP C
200V, 300V, 300S
Ethernet
RFC1006  
supports Simatic PDiag.
(www.siemens.com) and 500S

Driver for the Siemens Sigmasys


fire alarm centre. Spontaneou slave Siemens
Siemens driver based on the GMA Manager Sigmasys
Siemens
Sigmasys driver
ZT-SIGMASYS R
TOPSIS
Ethernet unknown  
(Destination Management System)

Driver for S7 Simotion D4x5


connection via standard network Siemens Simotion
card without additional software. D425/D435/D445
Siemens Simotion driver ZT-SIMOTION B Offline variable import from CPUs
Ethernet TCP/IP  
Siemens Scout file possible.
(www.siemens.com)

Driver for the communication via a Siemens S7 and


MPI net throuh a SST Interface other PLCs
Siemens SST Driver ZT-SST A
supporting MPI
PC Slot Card MPI  
Card. (www.mysst.com)

Connection to the Siemens process AS220,AS220E,A


control system TELEPERM M / ME S220EA,AS220E
via the SYNO®gate 300 IP from HF,EAK,AS230,A
Siemens Teleperm driver ZT-TELEPERM32 B Synotec (Vertrieb: www.psg- S235,AS231,MS2 Ethernet TCP/IP  
gmbh.de) 36,AG150U,AG15
5U,AS215

Driver for Texas Instruments TI 505


TI 505 - 545 / 545. Protocols: TBP,NITP, TCP/IP TI 505 and 545 TCP/IP, TBP,
Siemens
driver
ZT-TI500 A Serial, Ethernet
NITP  

Driver for communication with VIPA Siemens S7-


Windows CE Touch Panel with PLCs or
integrated S7-Chip for PLC compatible PLCs
Driver for VIPA connected trough MPI.
Siemens
CE touchpanel
ZT-VIPA32 A (eg. Vipa) with " Bussystem, Local MPI  
S7 functions" over
MPI.

Connection to Sigmatek products Serial,


Sigmatek DIAS
Sigmatek SIGMATEK driver ZT-SIGMA32 A (www.sigmatek.at) Bussystem, unknown 
Ethernet
Connection to all Sigmatek PLCs, All Sigmatek
which can be engineered with the PLCs supporting
Sigmatek Lasal engineering software LASAL. Serial, Ethernet,
Sigmatek
Driver
ZT-STLASAL A the Sigmatek
CAN Bus Adapter
Sigmatek Lasal 
Lasal protocol.
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Driver for Sinthesi PICnet PLCs
(www.sinthesi.com).The driver uses PICnet PLCs from
the SAPP (Sinthesi Asynchronous
Sinthesi PICnet driver ZT-SINTH A Sinthesi Serial SAPP  
Packet Protocol) protocol

Driver for communication with Devices


devices supporting SNMP. SNMP, SNMPv1,
SNMP SNMP Driver ZT-SNMP C supporting SNMP Ethernet 
SNMPv2c

Arcnet driver for ABB PLCs based ABB PLC of the


on Arcnet Interface Card from So series 07KTxx
ARCNET - Driver Coaxialcable
So Hard
for ABB
ZT-ARCNETNT A Hard with Arcnet
RG62/U
Arcnet 
connection

The IEC61850 Client driver.


The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client IEC 61400-25-4
Sprecher IEC 61400-25-4 ZT-IEC61400-25- services via TCP/IP (profile A1/T1). Annex C
Automation Annex C 4-C
R The driver acts as Client (Master) compatible Server
Ethernet IEC 61850  
during comunication.
The driver supports Reporting
(unbuffered and buffered).

The IEC61850 Client driver.


The communication between driver
and PLC is based on the IEC 61850
protocol, using server/client
Sprecher services via TCP/IP (profile A1/T1). IEC 61850
Automation
IEC 61850 driver ZT-IEC61850 R The driver acts as Client (Master) compatible PLCs Ethernet IEC 61850 
during communication.
The driver supports Reporting
(unbuffered and buffered).

Driver for the IEC 60870-5-101 PLCs supporting


(serial) and the IEC 60870-5-104 the IEC 60870-5-
Sprecher IEC 60870-5- (TCP/IP) protocol; a Master 101 or the IEC IEC 60870-5-104,
Automation 101_104 driver
ZT-IEC870 C (controlling station) 60870-5-104
Serial, Ethernet
IEC 60870-5-101 
protocol.

The driver writes values from


selected variables into a dedicated
Write variable table of a SQL database. The ODBC databases
SQL
values in SQL
ZT-ExportSQL B driver communicates via ODBC Local ODBC  
connection.

The driver is used for the SQL database


bidirectional data exchange with a
SQL SQL Driver ZT-SQLDRV A supporting ODBC Ethernet, Local SQL  
SQL database supporting ODBC.

Driver for the communication via a Siemens S7 and


MPI net throuh a SST Interface other PLCs
SST SST Driver ZT-SST A
supporting MPI
PC Slot Card MPI 
Card. (www.mysst.com)

Driver for straton connection. straton


straton straton driver ZT-STRATON - Ethernet, Local TCP/IP 
Driver for communication with
straton PLCs. Replaces straton 32
driver. The driver can use several PLCs based on
straton straton NG driver ZT-StratonNG A connections at the same time and the straton VMTK. Ethernet TCP/IP 
uses an improved communication
concept.

Connection to a Futrit PLC ACADA


70. The driver supports modem Futurit ACADA 70
Swarco Futurit Swarco Futurit ZT-FUTURIT B Serial FuturitCom 
connection

Connection to the Siemens process AS220,AS220E,A


control system TELEPERM M / ME S220EA,AS220E
via the SYNO®gate 300 IP from HF,EAK,AS230,A
Synotec Teleperm driver ZT-TELEPERM32 B Synotec (Vertrieb: www.psg- S235,AS231,MS2 Ethernet TCP/IP 
gmbh.de) 36,AG150U,AG15
5U,AS215

Telco200Z - Telecontrol central


station in combination with
telephone communication. Telco200Z,
Telco Telco200 driver ZT-TELCO_32 A Dataexchange for online and Telco210Z Serial unknown 
historical data is possible. CTi
GmbH, www.ctiweb.de
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Open Modbus TCP/IP driver with
the following differences compared
to the standard Modbus driver: All controllers and
- TCP/IP channel bundling gateways
- improved communication with supporting Open
gateways Modbus TCP/IP.
- read and write only for holding Sequence of
register Events is only
- supports only Open Modbus available for
TCP/IPprotocol AREVA MiCOM
- Sequence of Events for AREVA P126/P127, GE
MiCOM 126/127, GE Multilin F650, Multilin F650, GE
GE Multilin UR-series, ICE NPx800, Multilin UR-series,
Modbus Energy Modbus RTU over
Telemecanique
driver
ZT-MODBUS_E C Schneider MODICON TSX ICE NPI 800, ICE Ethernet
TCP 
Premium with COSTRONIC NPID 800 and
Software Schneider
MODICON TSX
www.areva-td.com, (Premium,M340,
www.gedigitalenergy.com, Quantum) with
www.groupeice.com, Function block
www.costronic.ch (DFB) from
Costronic and
Schneider Sepam
Protection Relais.

Connection to Modicon TSX PLC


Modicon TSX via Unitelway protocol. Modicon TSX
Telemecanique ZT-MODICON A Serial Unitelway  
Micro driver (www.schneider-electric.de)

The driver supports the protocol


"Modbus RTU" over a serial All PLCs
connection and over a TCP/IP supporting Modbus RTU -
connection and the protocol "Open Modbus RTU, serial, Open
Modbus RTU and
Modbus TCP" for TCP/IP Open Modbus Modbus TCP,
Telemecanique Open Modbus ZT-MODRTU32 A
TCP/IP or
Serial, Ethernet
Modbus RTU over  
TCP connection. The driver acts as a
Modbus Master. (For a Modbus Modbus TCP, Modbus
Slave please use the Process ASCII(seriell) ASCII - serial
Gateway)

Driver for CTI PLCs,, Texas


Instruments TI 505 PLCs or Simatic CTI PLCs, Ti505,
Texas 545/555 PLCs. The driver support Simatic 545,
Instruments
CTI driver ZT-CTI B the protocols CAMP and NITP with Simatic 555
Ethernet NITP, CAMP  
Packed Task Codes.

Driver for Texas Instruments TI 505


Texas TI 505 - 545 / 545. Protocols: TBP,NITP, TCP/IP TI 505 and 545 TCP/IP, TBP,
Instruments driver
ZT-TI500 A Serial, Ethernet
NITP  

Driver for the Slot PCL SPCx00


Driver for Slot from TR-Systemtechnik (tr- SPC-xx needed
TRSystemtechnik
PCL SPCx00
ZT-SPCNT A Local unknown  
systemtechnik.de)

Driver for the direct connection to a IQ xxx Trend Attribut


Trend Trend Driver ZT-TREND32 A trend PLC Serial
Comunication  

The driver has the same


functionality as driver Trend32. It is
however based on driver Trend
TCC-Suite. W ith this it can
communicate not only a serial IQ xxx
Trend Trend NG driver ZT-TrendNG A interface but also via all Serial, Ethernet unknown  
communication types (e.g. TCP/IP,
Modem) the TCC-Suite supports
(www.trendcontrols.com)

Driver for comunication with devices


in packaging and process industry VDMAXML_P
using VDMAXML_P Protocoll e.g.: compatible PLCs
Laetus components. or devices;
VDMA VDMA-XML driver ZT-VDMA_XML B Www.vdma.org, www.laetus.com Laetus devices Ethernet VDMAXML_P  
with VDMA-XML
interface server.

Driver for ESA W indows CE Siemens S7-


terminal including ESA PCI CIB PLCs or
communication card for W indows compatible PLCs
Driver for ESA CE for the communication with
Vipa
PCI CIB
ZT-ESA32 A (e.g. Vipa) with Local MPI 
PLCs supporting MPI. S7 functions via
MPI.

Driver for the MPI->HMI adapter Siemens S7-


from Siemens or Helmholz PLCs or
compatible PLCs
HMI adapter
Vipa ZT-S7HMI A (e.g. VIPA) with Serial MPI 
driver
S7 functions via
MPI.
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Driver for PCS812 communication Siemens S7-
box from Lauer for communication PLCs or
PCS812 S7 via MPI. (www.systeme-lauer.de) compatible PLCs
Vipa
connection
ZT-PCS812 A
(e.g. VIPA) with
Serial MPI  
MPI interface

H1 protocol driver for Siemens S5.


H1 resp. "Industrial Ethernet" is the
protocol name for the cellular
network, which is based on the 7-
layer-model of the ISO/OSI Siemens S5
Vipa S5 H1 driver ZT-S5H1NT B Ethernet H1  
standard. (www.vipa.de,
www.siemens.de, www.inat.de). At
PC you need the PC H1 Driver from
INAT.

Driver for the S5 TCP/IP


communication. The driver Siemens S5,
supports polling (SEND/RECEIVE) Siemens S7 (only
and spontaneous communication with VIPA
Vipa S5 TCP-IP driver ZT-S5TCP32 B (FETCH/WRITE). (www.vipa.de, CP443), Vipa
Ethernet TCP/IP 
www.siemens.de, www.inat.de, System 300
www.process-informatik.de)

Driver for S7 PLCs via MPI / H1 /


Profibus DP / TCP/IP. Based on the Siemens S7 Profibus DP, MPI,
S7 driver Softnet software SIMATIC NET (Softnet) 300/400 and other Ethernet, PC Slot TCP/IP -
Vipa
based
ZT-S7NT B
compatible PLCs Card RFC1006, ISO 
from Siemens. (www.siemens.com)
8073

For the serial communication via the


Siemens PC adapter / Helmholz PC
adapter to Siemens and Vipa PLCs Siemens S7
PC Adapter - Vipa ZT- with MPI interface. Alternativ: Serial 300/400 CPUs, all Siemens PC-
Vipa
Green Cable S7PCADAPTER
A communication to Vipa PLCs via the VIPA CPUs Serial
Protocol 
Vipa Green Cable to the Vipa PD
interface.

Driver for S7 TCP/IP connection via Siemens S7 200,


standard network card without 300, 400 and
additional software. The driver 1200 or VIPA TCP/IP -
Vipa S7 TCP-IP driver ZT-S7TCP C
200V, 300V, 300S
Ethernet
RFC1006 
supports Simatic PDiag.
(www.siemens.com) and 500S

Driver for communication with VIPA Siemens S7-


Windows CE Touch Panel with PLCs or
integrated S7-Chip for PLC compatible PLCs
Driver for VIPA connected trough MPI.
Vipa
CE touchpanel
ZT-VIPA32 A (eg. Vipa) with " Bussystem, Local MPI 
S7 functions" over
MPI.

Internal driver which gives back


every set value as actual value with
unchanged value but new time
stamp. Status bits for Cause of
Transmission are also changed. no PLC
Internal driver This guarantees that when writing
Volkswagen
with time stamp
ZT-Reflect A connection Local unknown 
set values with the same value and
same time stamp (VBA/VSTA), the
value is recognized as a changed
value and is therefore passed on

Telco200Z - Telecontrol central


station in combination with
telephone communication. Telco200Z,
Vollmer Telco200 driver ZT-TELCO_32 A Dataexchange for online and Telco210Z Serial unknown 
historical data is possible. CTi
GmbH, www.ctiweb.de
Connection type
Windows

cation protocol
Driver name

Price group

Communi-

CE / Mobile
XP / 2003 /

Windows 7
Category Article number Description PLC Types

Vista /
Open Modbus TCP/IP driver with
the following differences compared
to the standard Modbus driver: All controllers and
- TCP/IP channel bundling gateways
- improved communication with supporting Open
gateways Modbus TCP/IP.
- read and write only for holding Sequence of
register Events is only
- supports only Open Modbus available for
TCP/IPprotocol AREVA MiCOM
- Sequence of Events for AREVA P126/P127, GE
MiCOM 126/127, GE Multilin F650, Multilin F650, GE
GE Multilin UR-series, ICE NPx800, Multilin UR-series,
Modbus Energy Modbus RTU over
W ago
driver
ZT-MODBUS_E C Schneider MODICON TSX ICE NPI 800, ICE Ethernet
TCP 
Premium with COSTRONIC NPID 800 and
Software Schneider
MODICON TSX
www.areva-td.com, (Premium,M340,
www.gedigitalenergy.com, Quantum) with
www.groupeice.com, Function block
www.costronic.ch (DFB) from
Costronic and
Schneider Sepam
Protection Relais.

The driver supports the protocol


"Modbus RTU" over a serial All PLCs
connection and over a TCP/IP supporting Modbus RTU -
connection and the protocol "Open Modbus RTU, serial, Open
Modbus RTU and
Modbus TCP" for TCP/IP Open Modbus Modbus TCP,
W ago Open Modbus ZT-MODRTU32 A
TCP/IP or
Serial, Ethernet
Modbus RTU over 
TCP connection. The driver acts as a
Modbus Master. (For a Modbus Modbus TCP, Modbus
Slave please use the Process ASCII(seriell) ASCII - serial
Gateway)

Driver for straton connection. straton


W ago straton driver ZT-STRATON - Ethernet, Local TCP/IP 
Driver for communication with
straton PLCs. Replaces straton 32
driver. The driver can use several PLCs based on
W ago straton NG driver ZT-StratonNG A connections at the same time and the straton VMTK. Ethernet TCP/IP  
uses an improved communication
concept.

Driver for internal variables.


Variables can be local resp. global
zenon system Driver for internal and can be started with an initial -
driver variables
- - value or with the last value Local unknown  
(remanence). The driver does not
use up I/Os or TAGs.

zenon Mathematics driver. For


Driver for numerical and binary operations.
zenon system -
driver
Mathematics - - The driver does not use up I/Os or Local unknown 
variable TAGs.

zenon Simulation driver for


Driver for simulation and internal variables.
zenon system Variables also can be saved -
simulator - - Local unknown 
driver remant. The driver does not use up
variables
I/Os or TAGs.

zenon System driver for displaying


internal project information, network
information, hardware information of
zenon system Driver for system the PC etc. The driver does not use -
driver variables
- - Local unknown 
up I/Os or TAGs.
zenon 7

zenon Logic
Fieldbus drivers
Windows

cation protocol
Driver name

Price group

Connection

Communi-

XP / 2003 /

Windows 7
type
Category Article number Description PLC Types

Mobile
Vista /

CE /
Driver for Applicom IO cards (Direct Modbus RTU -
Link) serial, Profibus
Applicom IO -
Applicom ST-AppIO T PC Slot Card DP, Can Open, 
configuration
DeviceNet,
ControlNet
K-Bus driver for Driver for Beckhoff CX1000 with K- -
Beckhoff ST-CX1000 T Bus Local K-Bus 
CX1000
For Bihl+Widemann AS-i - Serial, PC Slot
Bihl+Widemann AS-interface ST-Asi T configurations AS-i 
Card
Brodersen - -
Brodersen IOTOOLS ST-IOTools T Serial proprietary  
Driver for so called super-global
Win32 Shared variables exchanged between two -
COPA-DATA ST-Win32 T Local proprietary 
memory straton RT instances

Internal straton peripheral driver -


Shared Memory dreiber; may only
straton to zenon be use once on a computer! This -
COPA-DATA - -
driver must be configured in the
Local proprietary 
RT connection
straton project if a zenon variable is
set to "externally visible"
Driver for Hilscher fieldbus boards;
the configuration is doen via
Open Modbus
Hilscher configuration software
TCP, Profinet,
Hilscher SYCON "SYCON.net". The configuration file -
Hilscher ST-CIFX T PC Slot Card EtherCAT, 
CifX has to be exported as XML in
EtherNet/IP,
SYCON.net and imported in straton
Sercos III
fieldbus configuration.

Driver for Hilscher Profibus DP


Hilscher CIF cards (CIF 30, 40, 50, 60, 104). The -
Hilscher ST-ProfDP T configuration is done via straton PC Slot Card Profibus DP  
Profibus
fieldbus configurator.
Driver for Hilscher Fieldbuscards,
the configuration is done via
Profibus DP,
Hilscher configuration software
Hilscher SYCON - Interbus, Can
Hilscher ST-Sycon T "SyCon". The configuration is PC Slot Card  
configuration Open, DeviceNet,
exported with SyCon and importet in
ControlNet
the straton fieldbus configurator.

Driver for HMS fieldbus cards, the


HMS configuration is done via HMS - Profibus DP,
HMS ST-HMS T PC Slot Card 
configuration cKonfiguration software DeviceNet, AS-i

Driver for Wago I/O System 758


ThinkIO/IOSystem (Wago IPC) bzw. Kontron ThinkIO -
Kontron ST-THINKIO T Bussystem proprietary  
758 with Windwos CE 5.0

communikation with I/O Modules Melsec


Mitsubishi Q C- using C-CPU of the Melsec Q-Serie
Mitsubishi ST-QBF - Q12DCCPU-V Bussystem unknown  
CPU via backplane bus.

Driver for Modbus Master protocol Modbus RTU -


MODBUS Master -
Open Modbus ST-MBMASTER T Serial, Ethernet serial, Open 
protocol
Modbus TCP
Driver for Modbus Slave protocol Modbus RTU -
MODBUS Slave -
Open Modbus ST-MBSLAVE T Serial, Ethernet serial, Open 
protocol
Modbus TCP
Driver for Phoenix Contact Interbus
-
Phoenix Contact Interbus-S ST-PHOEINTER T Card PC Slot Card Interbus 

straton driver for the communication


ST- with Profinet devices. -
Profinet ProfiNet IO RT T Ethernet Profinet 
PROFINETIORT

To communicate with I/O Modules SIMATIC S7-


of SIMATIC S7 300 series via the modular
backplane bus of the mEC31 Embedded
controller Controller, I/O
Siemens SIMATIC S7-mEC ST-S7mEC31 - Bussystem proprietary  
Module for
SIMATIC S7 300
Serie

Driver for Siemens Profibus Master


SoftNet -
Siemens ST-SOFTNET T cards Local Profibus DP 
ProfibusDP
Driver for Wago I/O System 758
ThinkIO/IOSystem (Wago IPC) bzw. Kontron ThinkIO -
Wago ST-THINKIO T Bussystem proprietary 
758 with Windwos CE 5.0

Driver for Applicom IO cards (Direct Modbus RTU -


Link) serial, Profibus
Applicom IO -
Woodhead ST-AppIO T PC Slot Card DP, Can Open,  
configuration
DeviceNet,
ControlNet

Das könnte Ihnen auch gefallen