Beruflich Dokumente
Kultur Dokumente
TOWER CRANE
164 ft (50.0m)
200HC/132HC
4.14m
13'-7"
Standard 132 HC tower sections
6 x 8'-2" (2.5m) = 49'-1" (15.0m)
Transition
290HC/132HC
4.14m
13'-7"
6.85m
22'-6"
Transition
6 x 13'-7" (4.14m) = 81'-6" (24.84m)
7'-7"
2.3m
200 HC base section
Configuration IV
8.85m
29'-0"
7'-7"
2.3m
with 132 HC Tower
max. 148 ft (45.1m) HUH on
290 HC base section
concrete foundation
12.42m
40'-9"
4.95m
16'-3"
290 HC Undercarriage
290 HC base section
Configuration III
with 132 HC/200 HC Tower
4.95m
16'-3"
Configuration II
290 HC Undercarriage with 132 HC/200 HC/290 HC Tower
19'-8" (6.0m) Gauge
max. 201 ft (61.3m) HUH on
concrete foundation
max. 216 ft (66.0m) HUH on
FREESTANDING
Configuration I
with 132 HC/290 HC Tower undercarriage (traveling and stationary)
max. 218 ft (66.6m) HUH on concrete foundation
max. 234 ft (71.2m) HUH on undercarriage
Morrow Equipment
Configurations 132 HC
18'-8"
168'-4" (51.3m)
5.7m
Jib Tip Radius
2.2m
7'-3"
13'-5"
4.1m
46'-3" 3'-10" 164 ft (50.0m)
14.1m 1.16m
4,850 lbs
2 200 kg
5,840 lbs
2 650 kg
14 x 8'-2" (2.5m) = 114'-7" (35.0m)
Standard 132 HC tower sections
131 ft (40.0m)
7,055 lbs
3 200 kg
46'-3" 168'-4"
14.1m 51.3m
2.5m
8'-2"
*Hydraulic Top
NOTE! If hook height exceeds 330 ft (100m), Climbing Unit
30.56m
100'-3"
6'-0"
the number of tower sections above the upper-
1.83m
most tie-in location MUST be reduced by 1 tower
section.
climbing unit
132 HC base
1 x 22'-6" (6.85m) + 11 x 8'-2" (2.5m) = 112'-7" (34.35m) max.
1 x 22'-6" (6.85m) + 4 x 8'-2" (2.5m) = 55'-3" (16.85m) min.
tower section
Reinforcing
steel each way
Elevation
➜
mm
7'-
2-Part Line
Hook 2-Part Line ft 40 50 60 70 80 82 90 98 105 110 115 123 131 139 148 156 164
Radius Max Capacity – Radius m 12.2 15.2 18.3 21.3 24.4 25.0 27.5 30.0 32.0 33.5 35.0 37.5 40.0 42.5 45.0 47.5 50.0
164 ft 17,635 lbs – 54.5 ft lbs 17,635 17,635 16,180 13,710 11,815 11,175 10,010 9,060 8,355 7,825 7,560 6,945 6,415 5,950 5,555 5,180 4,850
50.0m 8 000 kg – 16.6m kg 8 000 8 000 7 340 6 220 5 360 5 070 4 540 4 110 3 790 3 550 3 430 3 150 2 910 2 700 2 520 2 350 2 200
148 ft 17,635 lbs – 56.8 ft lbs 17,635 17,635 16,910 14,350 12,370 11,705 10,495 9,500 8,765 8,200 7,935 7,300 6,745 6,285 5,840
45.0m 8 000 kg – 17.3m kg 8 000 8 000 7 670 6 510 5 610 5 310 4 760 4 310 3 975 3 720 3 600 3 310 3 060 2 850 2 650
131 ft 17,635 lbs – 58.7 ft lbs 17,635 17,635 17,550 14,945 12,875 12,190 10,935 9,900 9,125 8,555 8,270 7,630 7,055
40.0m 8 000 kg – 17.9m kg 8 000 8 000 7 960 6 780 5 840 5 530 4 960 4 490 4 140 3 880 3 750 3 460 3 200
115 ft 17,635 lbs – 62.0 ft lbs 17,635 17,635 17,635 15,875 13,690 12,960 11,640 10,535 9,735 9,125 8,820
35.0m 8 000 kg – 18.9m kg 8 000 8 000 8 000 7 200 6 210 5 880 5 280 4 780 4 415 4 140 4 000
98 ft 17,635 lbs – 64.6 ft lbs 17,635 17,635 17,635 16,580 14,285 13,535 12,170 11,025
30.0m 8 000 kg – 19.7m kg 8 000 8 000 8 000 7 520 6 480 6 140 5 520 5 000
82 ft 17,635 lbs – 66.9 ft lbs 17,635 17,635 17,635 16,930 14,815 14,110
25.0m 8 000 kg – 20.4m kg 8 000 8 000 8 000 7 680 6 720 6 400
Capacity
2-Part Line
15,000 lbs/6 805 kg 14,110 lbs
6 400 kg
8,820 lbs
9,000 lbs/4 080 kg 4 000 kg
7,055 lbs
3 200 kg
5,840 lbs
2 650 kg 4,850 lbs
6,000 lbs/2 720 kg
2 200 kg
0
Jib Radius in feet 0 10 20 30 40 50 60 70 82 98 115 131 148 164
in meters 0 3.0 6.1 9.1 12.2 15.2 18.3 21.3 25.0 30.0 35.0 40.0 45.0 50.0
Motor Information
Drive Unit Horsepower Kilowatts Speed
Trolley (2-part line) 5.4 hp 4.0 kW 39 - 128 - 240 fpm 12 - 39 - 73 m/min
*NOTE! Jibs up to and including 131-ft (40.0m) hook reach require only one swing motor; jibs with 148-ft (45.0m) hook reach and longer require two swing motors.
Power Requirements
480 V — 3-phase — 60 Hz — 150 Amperes
Specifications subject to change without prior notice. For additional information, contact Morrow Equipment.
Slewing Assembly H 19'-1" x 8'-8" x 7'-7" 14,500 lbs Jib Section ➁ H 33'-10" x 4'-0" x 5'-7" 2,600 lbs
(Complete) 1 L W
5.82m x 2.65m x 2.3m 6 575 kg #621 L W 10.3m x 1.23m x 1.7m 1 180 kg
Slewing Assembly H 14'-1" x 8'-8" x 7'-7" 9,450 lbs Jib Section ➂ H 33'-10" x 4'-0" x 5'-7" 3,040 lbs
Upper Part 2 L W
4.3m x 2.65m x 2.3m 4 285 kg #622 L W 10.3m x 1.23m x 1.7m 1 380 kg
Slewing Assembly H 5'-0" x 7'-5" x 7'-1" 5,050 lbs Jib Section ➃ H 33'-10" x 4'-0" x 5'-7" 2,095 lbs
Lower Part 3 L W
1.52m x 2.26m x 2.17m 2 290 kg #631 L W 10.3m x 1.23m x 1.7m 950 kg
Hoist Unit with Frame 4 H 7'-6" x 13'-6" x 5'-6" 10,580 lbs Jib Section ➄ H 17'-5" x 4'-0" x 5'-7" 1,070 lbs
82 hp (61 kW) L W 2.29m x 4.1m x 1.68m 4 800 kg #632 L W 5.3m x 1.23m x 1.7m 485 kg
Counterjib 5 H 36'-1" x 7'-10" x 4'-5" 5,510 lbs Jib Section ➅ H 17'-10" x 4'-7" x 5'-9" 1,115 lbs
L W 11.0m x 2.4m x 1.34m 2 500 kg #641 L W 5.44m x 1.43m x 1.76m 505 kg
Counterweight H 3'-11" x 11" x 6'-9" 3,640 lbs Jib Assembly 6 165'-4" x 5'-2" x 6'-0" 15,695 lbs
Block A 1.19m x 0.28m x 2.05m 1 650 kg 164-ft (50.0m) ➀➁➂➃➄➅ 50.4m x 1.58m x 1.83m 7 120 kg
L W
Counterweight H 3'-11" x 11" x 4'-1" 2,205 lbs Jib Assembly 6 148'-11" x 5'-2" x 6'-0" 14,640 lbs
Block B L W 1.19m 0.28m x 1.25m 1 000 kg 148-ft (45.0m) ➀➁➂➃➅ 45.4m x 1.58m x 1.83m 6 640 kg
Base Tower Section H 22'-6" x 6'-0" x 6'-0" 5,355 lbs Jib Assembly 6 132'-7" x 5'-2" x 6'-0" 13,670 lbs
132 HC L W 6.85m x 1.83m x 1.83m 2 430 kg 131-ft (40.0m) ➀➁➂➄➅ 40.4m x 1.58m x 1.83m 6 200 kg
Long Tower Section 32'-10" x 6'-0" x 6'-0" 7,055 lbs Jib Assembly 6 116'-2" x 5'-2" x 6'-0" 11,685 lbs
➀➂➃➅
H
132 HC L W
10.0m x 1.83m x 1.83m 3 200 kg 115-ft (35.0m) 35.4m x 1.58m x 1.83m 5 300 kg
Standard Tower Section 8'-2" x 6'-0" x 6'-0" 2,160 lbs Jib Assembly 6 99'-9" x 5'-2" x 6'-0" 10,580 lbs
➀➂➄➅
H
132 HC L W
2.5m x 1.83m x 1.83m 980 kg 98-ft (30.0m) 30.4m x 1.58m x 1.83m 4 800 kg
Transition Section 13'-7" x 7'-7" x 7'-7" 5,290 lbs Jib Assembly 6 83'-4" x 5'-2" x 6'-0" 9,500 lbs
200 HC/132 HC
H
Base Tower Section H 29'-0" x 7'-7" x 7'-7" 8,960 lbs Top Climbing Unit H 21'-2" x 6'-11" x 7'-11" 9,900 lbs
200 HC L W
8.85m x 2.3m x 2.3m 4 065 kg w/hydraulics L W 6.45m x 2.1m x 2.42m 4 490 kg
Standard Tower Section H 13'-7" x 7'-7" x 7'-7" 4,520 lbs Climbing Collar H 8'-2" x 7'-8" x 1'-5" 1,765 lbs
200 HC L W 4.14m x 2.3m x 2.3m 2 050 kg 132 HC L W
2.5m x 2.33m x 0.43m 800 kg
Transition Section H 13'-7" x 7'-7" x 7'-7" 5,290 lbs Bottom Climbing Unit H 16'-5" x 6'-0" x 6'-0" 9,390 lbs
290 HC/132 HC L W
4.14m x 2.3m x 2.3m 2 400 kg w/hydraulics L W
5.0m x 1.83m x 1.83m 4 260 kg
Base Tower Section H 40'-9" x 7'-7" x 7'-7" 17,505 lbs Hook Block H 1'-7" x 1'-6" x 2'-11" 705 lbs
290 HC L W
12.42m x 2.3m x 2.3m 7 940 kg L W
0.49m x 0.45m x 0.9m 320 kg
Standard Tower Section H 13'-7" x 7'-7" x 7'-7" 5,025 lbs Trolley H 5'-11" x 4'-9" x 3'-1" 640 lbs
290 HC L W 4.14m x 2.3m x 2.3m 2 280 kg L W 1.8m x 1.44m x 0.94m 290 kg
NOTE: Weights and dimensions are approximate. Scale components before lifting.
1
Slewing Assembly Complete includes operator’s cab, two swing motors, slewing ring, slewing ring support and climbing shoes.
2
Slewing Assembly Upper Part includes operator’s cab and two swing motors.
3
Slewing Assembly Lower Part includes slewing ring, slewing ring support and climbing shoes.
4
Includes 82 hp (61 kW) hoist unit, electrical panel and handrails. Does not include wire rope.
5
Counterjib includes counterjib section, pendant bars and handrails.
6
Jib Assemblies include jib sections, pendant bars, pendant bar connecting pins and plates, trolley drive unit, trolley wire rope and trolley.
Morrow Equipment
C O M P A N Y, L. L. C.
3218 Pringle Road SE • P O Box 3306 • Salem, Oregon 97302-0306 USA The American home of
Tel. 503.585.5721 • Fax. 503.363.1172 • www.morrowequipment.com
Atlanta, GA • Charlotte, NC • Chicago, IL • Denver, CO • Honolulu, HI • Houston, TX • Los Angeles, CA • Las Vegas, NV
Millwood, NY • St. Louis, MO • San Francisco, CA • Dallas, TX • Seattle, WA • Miami, FL • Tampa, FL • Washington, DC
Sydney, Australia • Wellington, New Zealand • Vancouver, BC, Canada • Toronto, ON, Canada • México DF, México