Beruflich Dokumente
Kultur Dokumente
May 2017
DIN 603
D
ICS 21.060.10 Supersedes
DIN 603:2010-09
Translation by DIN-Sprachendienst.
In case of doubt, the German-language original shall be considered authoritative.
Siemens AG;;
© No part of this translation may be reproduced without prior permission of English price group 7
DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,
has the exclusive right of sale for German Standards (DIN-Normen).
www.din.de
www.beuth.de
!%gQF"
06.17 2684635
2018-12-07; Erabatti, Ravindra; SIEMENS, EM MS QM&GCC QM-AIS THA SQM
DIN 603:2017-05
Contents
Page
Foreword ................................................................................................................................................................................... 3
1 Scope ............................................................................................................................................................................ 4
2 Normative references ............................................................................................................................................ 4
3 Dimensions ................................................................................................................................................................ 5
4 Technical delivery conditions ............................................................................................................................. 8
5 Masses .......................................................................................................................................................................... 9
6 Designation .............................................................................................................................................................. 10
Siemens AG;;
2
2018-12-07; Erabatti, Ravindra; SIEMENS, EM MS QM&GCC QM-AIS THA SQM
DIN 603:2017-05
Foreword
This standard has been prepared by Working Committee NA 067-00-08 AA “Fasteners with special forms
and made of plastic” of DIN-Normenausschuss Mechanische Verbindungselemente (DIN Standards Committee
Fasteners).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. DIN [and/or DKE] shall not be held responsible for identifying any or all such patent rights.
Amendments
b) the designation of radius r3 and of the width of the square neck vn in Figure 1 have been corrected;
c) for M8 and M10, values for ls,min at a nominal size of 140 mm have been corrected;
Previous editions
3
2018-12-07; Erabatti, Ravindra; SIEMENS, EM MS QM&GCC QM-AIS THA SQM
DIN 603:2017-05
1 Scope
This standard specifies properties for sizes M5 to M20 cup head square neck bolts of product grade C.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies.
DIN 962, Bolts, screws, studs and nuts — Designation, types and finishes
DIN EN 26157-1, Fasteners — Surface discontinuities — Bolts, screws and studs subject to general
requirements
DIN EN ISO 225, Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions
DIN EN ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts,
screws and studs with specified property classes — Coarse thread and fine pitch thread
DIN EN ISO 3506-1, Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts,
screws and studs
DIN EN ISO 4032, Hexagon regular nuts (style 1) — Product grades A and B
DIN EN ISO 4753, Fasteners — Ends of parts with external ISO metric thread
DIN EN ISO 4759-1, Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
DIN ISO 965-1, ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
DIN ISO 8992, Fasteners — General requirements for bolts, screws, studs and nuts
Siemens AG;;
4
2018-12-07; Erabatti, Ravindra; SIEMENS, EM MS QM&GCC QM-AIS THA SQM
DIN 603:2017-05
3 Dimensions
For dimensions see Figure 1 and Table 1.
a u≤2P
Thread end chamfered (CH) or rounded (RN) as in DIN EN ISO 4753 at the manufacturer’s discretion.
Siemens AG;;
5
2018-12-07; Erabatti, Ravindra; SIEMENS, EM MS QM&GCC QM-AIS THA SQM
DIN 603:2017-05
Table 1 — Dimensions
Dimensions in millimetres
Thread size, d M5 M6 M8 M10 M12 M16 M20
6
2018-12-07; Erabatti, Ravindra; SIEMENS, EM MS QM&GCC QM-AIS THA SQM
DIN 603:2017-05
Table 1 (continued)
Dimensions in millimetres
Thread size, d M5 M6 M8 M10 M12 M16 M20
l ls and lg
ls lg ls lg ls lg ls lg ls lg ls lg ls lg
Nom.
size min. max. min. max. min. max. min. max. min. max. min. max. min. max. min. max.
Lengths exceeding 200 mm shall be graded in 20 mm increments. For bolts made of stainless steel, lengths above the stepped line
produced with full thread are permitted (at the manufacturer’s discretion).
Intermediate lengths should be avoided if possible.
Siemens AG;;
7
2018-12-07; Erabatti, Ravindra; SIEMENS, EM MS QM&GCC QM-AIS THA SQM
DIN 603:2017-05
8
2018-12-07; Erabatti, Ravindra; SIEMENS, EM MS QM&GCC QM-AIS THA SQM
DIN 603:2017-05
5 Masses
The values of mass given in Table 3 are reference values for products made of steel.
Table 3 — Mass
Thread
M5 M6 M8 M10 M12 M16 M20
size, d
Length, l Mass (7,85 kg/dm3) kg per 1 000 units ≈
mm kg
16 4,00 6,90
20 4,50 7,60 13,8 22,7
25 5,10 8,50 15,4 25,2
30 5,90 9,60 17,0 27,7 45,7
35 6,70 10,7 19,0 30,2 49,4
40 7,50 11,8 21,0 32,7 53,1
45 8,30 12,9 23,0 35,8 56,8
50 9,10 14,0 25,0 38,9 61,2 119
55 9,90 15,1 26,9 42,0 65,6 126
60 10,7 16,2 28,9 45,1 70,0 133
65 11,5 17,3 30,9 48,2 74,4 141
70 12,3 18,4 32,9 51,3 78,8 149 247
80 13,9 20,6 36,8 57,5 87,0 165 272
90 22,8 40,8 63,7 96,0 181 297
100 25,0 44,8 69,9 105 197 322
110 27,2 48,8 76,1 114 213 347
120 29,4 52,8 82,3 123 229 372
130 31,6 56,8 88,5 132 245 397
140 32,8 60,8 95,0 141 261 422
150 35,0 64,8 101 150 277 447
160 107 159 293 497
180 119 177 325 547
200 131 195 357 597
Siemens AG;;
9
2018-12-07; Erabatti, Ravindra; SIEMENS, EM MS QM&GCC QM-AIS THA SQM
DIN 603:2017-05
6 Designation
Designation of cup head square neck bolt, steel grade A2, of thread size d = M10, with a length l = 70 mm, of
property class 70:
If it is intended to supply cup head bolts with hexagon nuts as in DIN EN ISO 4032, the symbol “Mu” shall be
added to the designation, e.g:
The property class of the nuts supplied shall be at least equal to the property class of the cup head bolts.
See DIN 962, as far as applicable to cup head bolts, for supplementary order designations for special bolt
types and finishes.
Siemens AG;;
10