Beruflich Dokumente
Kultur Dokumente
Engine
John Deere PowerTech™ 4045D standard, naturally aspirated; 4045T
Manufacturer and Model
turbocharged, optional
Meets US EPA, CARB, and European NRMM non-road diesel engine emission
Non-Road Emission Standards
regulations
Cylinders………………………………………….. 4
Valves per Cylinder………………………………. 2
Displacement…………………………………….. 276 cu. in. 4.5 L
Net Peak Power (ISO9249)
4045D @ 2300 rpm…………………………… 71 hp 53 kW
Turbocharged 4045T @ 2200 rpm………….. 79 hp 59 kW
Torque Rise
4045D…………………………………………… 28%
Turbocharged 4045T………………………….. 30%
Net Peak Torque (ISO9249)
4045D…………………………………………… 218 lb. ft. 296 Nm
Turbocharged 4045T………………………….. 256 lb. ft. 348 Nm
106.5 x 127
Engine Bore and Stroke………………………… 4.19 x 5.00 in
mm
Lubrication……………………………………….. pressure system with spin-on filter and cooler
Fuel System
Fuel Consumption, typical…………………….. 1.1 to 1.9 gal/hr (4.2 to 7.2 L/hr)
Air Cleaner………………………………………. Dual stage dry type with safety element and evacuator valve
Cooling
Fan Type…………………………………………. Suction type
Engine Coolant Rating…………………………. -34 °F -37 °C
Engine Radiator…………………………………. 12.5 fins per in.
Transmission
oil -to water
Cooler………………………………….
Hydraulic Cooler…………………………………. oil -to water
Engine Oil Cooler……………………………….. oil-to-water
Powertrain
4 speed, helical cut gears, full power-shifted transmission with hydraulic reverser, standard
Number of Gears Forward……………………….. 4
Number of Gears Reverse……………………….. 2
Shift Control Electric forward-neutral-reverse control lever with neutral start interlock
Torque Converter Single stage, dual phase w/ 2.53:1 stall ratio, 11 in. (280 mm)
Power-Shift, Standard Transmission
Travel Speeds Measured with Tire Size 19.5L-24 Rear Tires
Optional Engine Forward Maximum Speed Reverse Maximum Speed
Gear 1 3.5 mph 5.7 km/h 4.5 mph 7.2 km/h
Gear 2 6.5 mph 10.4 km/h 8.2 mph 13.2 km/h
Gear 3 13.2 mph 21.2 km/h N/A mph
Gear 4 22.9 mph 36.8 km/h N/A
Standard Engine
Gear 1 3.5 mph 5.7 km/h 4.5 mph 7.2 km/h
Gear 2 6.5 mph 10.4 km/h 8.2 mph 13.2 km/h
Gear 3 13.2 mph 21.3 km/h N/A mph
Gear 4 23.0 mph 37.0 km/h N/A
Electric Clutch Cutoff on Gearshift and Loader Levers
Axles
Axle Oscillations Stop to Stop, Both Axles…. 22°
Axle Ratings, Standard
Static…………………………………………… 39,683 lb. 18,000 kg
Dynamic……………………………………….. 15,873 lb. 7,200 kg
Ultimate……………………………………….. 72,642 lb. 32,950 kg
Axle Ratings, MFWD
Static…………………………………………… 26,455 lb. 12,000 kg
Dynamic……………………………………….. 12,787 lb. 5,800 kg
Ultimate……………………………………….. 62,170 lb. 28,200 kg
Axle Ratings, Rear
Static…………………………………………… 28,660 lb. 13,000 kg
Power assisted, hydraulic wet disc, mounted inboard, self adjusting & self
Service Brakes……………………………………
equalizing
Spring applied, hydraulically released, wet, multi-disc, independent of service
Parking Brake…………………………………….
brakes with electric switch control
Hydraulics
Main pump: loader and steering: open center, single gear pump
Rated RPM……………………………………….. 2,200
Pump Flow, Backhoe……………………………. 28 gpm 106 L/m
Pump Flow, Loader……………………………… 28 gpm 106 L/m
System Relief Pressure, Backhoe……………. 3,625 psi 24,993 kPa
System Relief Pressure, Loader………………. 2,900 psi 19,995 kPa
Backhoe Hydraulic Cycle Time
Boom Raise - Ground to Full Height 2.6 seconds
Boom Lower - Full Height to Ground 3.0 seconds
Crowd In 3.3 seconds
Crowd Out 2.6 seconds
Bucket Dump 2.0 seconds
Bucket Curl 2.6 seconds
Swing 3.5 seconds
Loader Hydraulic Cycle Time
Boom Raise to Full Height 4.9 seconds
Bucket Dump at Maximum Height…….. 1.3 seconds
Boom Lower (Power Down)………… 2.5 seconds
Backhoe Controls: Two lever manual Std.
Pilot controls with pattern select Opt.
Case manual controls Opt.
Manual and/or electric auxiliary functions Opt.
Loader Controls
Single-Lever Control with Electric Clutch Cutoff Switch Std.
Manual Auxiliary function Opt.
Cylinders
Heat treated, chrome-plated, polished rods, hardened steel (replaceable bushings) pivot pins
Bore Rod Diameter Stroke
Loader Boom (2)………………………………….. 3.15 in. 1.97 in. 31.10 in.
80 mm 50 mm 790 mm
Loader Bucket (1)………………………………… 3.54 in. 1.97 in. 29.29 in.
90 mm 50 mm 744 mm
Backhoe Boom (1)……………………………….. 4.33 in. 2.20 in. 32.32 in.
110 mm 56 mm 821 mm
Backhoe Crowd (1)………………………………. 4.33 in. 2.48 in. 21.77 in.
110 mm 63 mm 552.9 mm
Backhoe Bucket (1)………………………………. 3.15 in. 1.97 in. 35.12 in.
Electrical
Voltage……………………………………………. 12 volt
Number of Batteries……………………………… 1
Battery Capacity…………………………………. 950 CCA
Reserve Capacity………………………………… 190 minutes
Alternator rating………………………………….. 70 amp
Optional Alternator……………………………. 90 amp
Lights: 4 Halogen, 2 Front 2 Rear (32,500 candlepower each)
Turn Signals and Flashers, Two Front, Two Rear; stop and tail lights and two rear reflectors
Operator Station
Canopy, Isolation Mounted, ROPS/FOPS Left Right Access, with molded roof (SAE J1040)
Indicator Audible
Monitor Gauge Digital
Light Warning
Alternator, Low Voltage X X
Service Code indicator X
Engine Air filter restriction X X
Engine Coolant Temperature X X X
Engine Oil Pressure X X
Fuel Level X
Hydraulic oil filter restriction X
Park Brake on/off X
Seat belt reminder X
STOP indicator X X
Torque converter oil temp X X X
MFWD Active X
Hydraulics Enabled X
Hourmeter X
Job Timer X
Engine RPM X
System Voltage X
Machine information and configuration X
Overall Vehicle
Unitized One-Piece Construction
Vehicle Tiedowns, Two Front and Two Rear
Rigid-Mounted Front Bumper and dent-resistant full coverage rear fenders
Toolbox
Tilt-Hood, Two Position
Tires/Wheels
Front Rear
Non-powered front axle………………………… 11L-16,12 PR F3 19.5L-24, 10 PR R4
With Mechanical Front Wheel Drive…………. 12-16.5, 8PR NHS SS-1 19.5L-24, 10 PR R4
Serviceability
Fueling, Ground Level
Swing Lock Pin Stored In Operator Station
Remote Grease Bank for Front Axle Pivot Pin
Independent Hydraulic Reservoir
Diagnostics
Computerized In-Cab Monitor Information
Fluid Change Interval Break-In Operating
Engine Oil………………………………………… Not Required 500 hrs
Hydraulic Oil…………………………………….. Not Required 2,000 hrs
Rear Axle………………………………………… Not Required 2,000 hrs
Mechanical Front Wheel Drive………………… Not Required 2,000 hrs
Transmission……………………………………. Not Required 2,000 hrs
Filtration Vertically Drain
Filters Service Hours
(microns) Mounted Hoses
Hydraulic Oil Filter, Spin-On enclosed replaceable
6 1,000 yes
element……………………………..
Fuel Filter…………………………………………. 0 yes/no
Secondary Fuel Filter……………………………. 0 yes/no
Operating Weights
With Full Fuel Tank, 175-lb. (79 kg) Operator and Standard Equipment
Standard…………………………………………… 12,800 lb. 6,124 kg
Typical with Cab, MFWD, Extendible Dipperstick,
15,090 lb. 6,843 kg
Counterweight (2) 900 lb. (408 kg)
Maximum Allowable Operating Weight……….. 0 lb. 0 kg
Optional Components
Cab……………………………………………….. 580 lb. 263 kg
Mechanical Front Wheel Drive with Tires……. 370 lb. 168 kg
Extendible Dipperstick ………………………… 440 lb. 200 kg
Front Loader Coupler…………………………… 630 lb. 286 kg
Backhoe Bucket Coupler……………………… 130 lb. 59 kg
Overall Dimensions
A) Ground Clearance, Minimum………………… 12 in. 305 mm
B) Overall Length, Transport…………………….. 23 ft. 3 in. 7.09 m
C) Width Over Tires………………………………. 6 ft. 10 in. 2.08 m
D) Height to Top of ROPS/Cab………………….. 8 ft. 12 in. 2.74 m
E) Length from Axle to Axle………………………
Non-Powered Front Axle………………………. 6 ft. 11 in. 2.11 m
Mechanical-Front-Wheel-Drive Axle…………. 7 ft. 0 in. 2.14 m
image
310J with 19.5-24 in. 10PR (R4) tubeless rear tires, 11L-16 in. 12PR (F3) front tires, 1.00 yd 3 (0.76 m3) loader bucket, and 24 in. X 6.5 ft3 (610 mm x
0.18 m3) backhoe bucket