Sie sind auf Seite 1von 9

SABIR MOIDU

Abudhabi Company for Petroleum Operations


(ADNOC ONSHORE)
Telephone: 971 56 853 8176
Mobile: 00971568538175
Email: sabirmoidu@adnoc.ae

Professional summary

A Senior Electrical Engineering professional with great experience in the Electrical


Engineering industry and profound expertise in the field of Oil & Gas. Highly-accomplished,
backed by Twenty Six (26) years of incisive experience.

Well-versed in CONCEPT, FEED, Optimization & Feasibility studies, Witnessed FAT,


SAFOP Studies, Proposal engineering, Engineering and Project Management Consultancy
PMC experience, Detail design as well as in Project Management, with strong interpersonal
and leadership abilities and the skill to motivate others to fulfill their full potential. Highly
analytical, combining a strategic approach to perfection with a strong desire to succeed, and
can acclimatize to any given circumstance with great ease. A well rounded professional with
passion for delivering results in terms of international standard engineering designs, resource
planning, in-house inspection, team building and co-ordination with internal departments. Well
versed with ADNOC, TRANSCO, Shell, PDO and Aramco Engineering standards and
Practices.

Evolving design documents such as Technical Specifications, Electrical Design Basis, Single
line Diagrams of H.V and L.V Systems, Data Sheet, RFQ, TBE, CTR, Preamble, Deliverable
list, Man hour estimate, Histogram, MTO, Cost estimate, Erection, Pre-Commissioning and
Commissioning of EHV Substations - 400KV,220 KV & 132 KV Gas Insulated Substations,
Worked in all facet of Project cycle of Large Oil and Gas Projects from Concept study, FEED,
detailed Engineering.

Adept at managing the procurement activities of electrical equipment like MV Switchgear,


GIS, LV Switchboard, PMS/ECS, MV VSDS, EHV Cables, Subsea cable, MV / LV / Control
cables, Transformers, UPS, Heat tracing, SEHT, and electrics in mechanical packages like
GTG, Compressor etc.; with excellent exposure to the conduction of Electrical Systems
Studies by ETAP and Report preparation for Arc flash calculation, EMC review. Possess
strong technical integrity, with a great understanding of Electrical Engineering Calculations
including CT & PT Sizing and Protection Relay Setting.

Area of Expertise includes:

 Reviewing various design Contractor’s Engineering documents and guiding them to


meet the project requirement and Company standards.
 Preparation of Load list and Load Summary, load list of Oil and Gas Wells, Solar Power
System sizing for Well head control panels, RTU, PLC, F& G Panels, SLD, Protection
and Metering diagrams, Electrical Equipment sizing calculations – Transformer, HV/LV
Switchgears and MCCs, HV and LV Cable Sizing, Emergency Diesel Generator sizing,
Technical review, comment and approval of Electrical documents developed by various
engineering contractors and vendors.
 Handled Several Greenfield as well as Brown Field Projects in Kuwait Oil Company,
Petrofac, Ministry of Electricity Kuwait, ADCO with Cross-Functional skills and

Page 1 of 9
Continued...

Ensuring On-Time Deliverables, Lead a Team of Electrical Engineer’s in Electrical


Engineering design of EPC Projects.
 Design of EHV Substations -400KV,220 KV & 132 KV Gas Insulated Substations of
ABB, Siemens, Mitsubishi, Hitachi .
 Interface with contractors and various departments of company for Electrical related
issues.
 Development of design basis and Scope of work for Projects, Pre-Bid Engineering
 Work across disciplines, identify and understand the interdisciplinary interfaces for project
execution, Handled complete Electrical engineering including FEED endorsement, review
of the engineering deliverables, site surveys, provided procurement assistance, co-
ordinated with client and vendors, and assisted in maintenance of project engineering
records.
 Electrical System Studies- Protection relay coordination studies, Load Flow
Calculations, Short Circuit Studies, Motor Starting Studies, Transient Stability Studies
etc.
 Preparing detailed engineering deliverables such as specifications, data sheets, single
line diagrams, cable schedules, bill of material, protection, relay co-ordination study,
electrical equipment list and selection of electrical equipment for safe and hazardous
areas.
 Providing Technical assistance in procurement of Electrical equipment such as
Switchgears/MCCs, Power factor correction panels, Power Transformers, Switchyard
equipment, etc.,
 Involved in SATs and FATs for various electrical packages, reviewing of project /
package method statements of installation contractor.
 Participating Design Review meetings, Project progress meetings, SAFOPs,
Constructability review meetings etc,
Education

Bachelor of Technology – Electrical and Electronics Govt Engineering College - Jabalpur, India

Career Profile

Company Designation Duration


October-
Chief Electrical Engineer(Project
ADCO, Abudhabi, UAE 2013-Till
& Engineering)
date
Jan2013-
AMEC Lead Electrical Engineer
Sept 2013
2011-
WOOD GROUP – CCC LIMITED, OMAN Principal Electrical Engineer
2012
2006-
KUWAIT OIL COMPANY, Kuwait Sr. Engineer (Electrical)
2011
2004-
TECHNIP Electrical Engineer
2005
2001-
Ministry Of Electricity And Water Electrical Engineer
2003
Electricity Utility Feeding Petro Chemical 1990-
Electrical Engineer
Plants (India) 2001

Page 2 of 9
Continued...

Executive Leadership/management Competencies

Project management Heavy design engineering Procurement


Negotiation & Contract
P&L Accountability Quality Assurance
Management
Cross functional leadership Training Management Risk Management
Client relationship
Budgeting & Bid assistance Team management
Management
Project monitoring &
Auditing
Control

Core Technical Competencies

Protection design &


ETAP Relay setting calculations
Coordination
Detailed Design Cable sizing & Load Studies SLD, BLD& calculations
Power Transformers &
Testing & Commissioning Gas Insulated Switch gears
Reactors
Capacitor Bank AC/DC Motors VFD’s and PLC’s

Major Projects Recently Worked

Projects Name Client Role


BAB INTEGRATED FACILITIES
PROJECT – a Mega Project of 36 Billion
USD Value
My Responsibilities as client Engineer
were not limited to following –
Multi Million Project Comprising of 220 ADC Preparation of Scope of Work and Design
KV Substation to receive 220 KV From basis, Review , Comment and Approval
Transco , several 33 KV Substations to Abu-Dhabi of Engineering design documents
Feed various loads of Trains , Power Company including Power SYSTEM Study,
Management System (SCMS ), for Specifications, Datasheet All interfaces
Cathodic Protection Systems, Induction Petroleum with existing systems, of Electrical Sizing
Motors, HV and LV Switchgears etc Operations. Calculations, SLD, SCMS , Power
Management Protection and Metering
Diagrams etc.
Mega Multimillion EPC Project for Similar responsibilities as stated above
Power Network Upgrade at all ADCO ,Review , Comment and Approval of
Fields – Siemens EPC Contractor Engineering design documents including
Power SYSTEM Study, All interfaces with
ADCO
existing systems, of Siemens for the
Engineering Procurement and 132KV Substation at BAB, all Electrical
Construction of 132 KV Substations at Equipment Sizing Calculations, SLD,
BAB Field. Protection and Metering Diagrams etc.
Engineering Procurement and Similar responsibilities as stated above.
Construction for BAB FAR NORTH CO2 Additionally carried out design for all
Injection Project . ADCO Interfaces and Tie-in with existing
facilities ,Solar Power System for Oil
Producer wells and water injection wells,
Selected as Electrical Focal Point of Cathodic Protection of Pipelines, Power

Page 3 of 9
Continued...

First Pilot Project of Full Scale EOR Supply Skid comprising of H.V and LV
Development Middle East . It Consists Switchgears etc
of 73 KM CO2 Pipeline , Two Pilot
Flanks of North and East of BAB Field ,
Solar Power System for Oil Producing
Wells, Block Valve Stations
EPC for BAB Habshan Development
Project Phase I

EPC Contractor PETROFAC Similar responsibilities as stated earlier


EMIRATES ,Review , Comment and Approval of
The main objective of this Project is to Engineering design documents including
supplement 40 MBOPD sustainable Complete Power SYSTEM Study,
productions at the BCDS. The Bab Protection Relay Coordination, All
Habshan-1 (Hb-1) Full Field ADCO interfaces with existing systems, Power
Development (FFD) Plan recommends Skid, Substations for Remote Degassing
phasing the development of Hb-1 into Stations , all Electrical Sizing Calculations
two phases. The scope of this Project CABLE Sizing Transformer Sizing , AC
covers the phase 1 development, which and DC UPS Sizing Calculations, SLD,
consists of fifteen (15) oil producers Protection and Metering Diagrams etc.
with associated gathering facilities and
fifteen (15) water injection wells with
associated Water Injection Cluster
(WIC) facilities.
EPC For Expansion of BAB GAS
Compression Project EBGCP Phase 2 Similar responsibilities as stated earlier,
Electrical Scope comprises of Main Review, Comment and Approval of
Intake 132 kV Substation, 33 kV Engineering design documents including
Substations for Compressor Station, Complete Power SYSTEM Study,
Variable Speed Drive for Compressor Protection Relay Coordination, All
Motors , Protection and Metering for interfaces with existing systems.
Substation etc
EPC for Construction of 132 KV
Substations at various locations in Similar responsibilities as stated earlier,
Ministry of Electricity Kuwait Engineering, Design, Construction, Pre-
MEW Commissioning, Commissioning, Review,
EPC Contractor’s MITSUBISHI ,
KUWAIT approve , Witnessing FAT and SAT for
HITACHI, ABB, SIEMENS, COGELEX
Switchgears, Transformers, DC UPS, AC
ALSTHOM
UPS etc,

Facilities Modernization Project EF


1500 KUWAIT OIL COMPANY KOC
Similar responsibilities as stated earlier
This project is part of the Company’s ,Review , Comment and Approval of
development plan to meet and achieve Engineering design documents including
its strategic production objectives and KUWAIT Complete Power SYSTEM Study,
targets by adding and upgrading surface OIL Protection Relay Coordination, All
production facilities along with relocation COMPANY interfaces with existing systems, all
of underground piping, and replacement Electrical Equipment Sizing Calculations,
of cables for South East Kuwait (SEK) SLD, Protection and Metering Diagrams
facilities, including the replacement of etc.
CRUs at three SEK GCs as well as
relocation of underground piping in one
North Kuwait (NK) facility.

Page 4 of 9
Continued...

Electrical Scope consists of


Modifications in 132 KV Substations, 33
KV Substations of Desalter, CRU
Substations’, Large CRU Compressors
motors with VSD
VACCUM RERUN REVAMP Project at As Technip Electrical Engineer, I
MINA ABDULLA REFINERY KNPC prepared all Electrical Engineering
KUWAIT NATIONAL PETROLEUM deliverables , Electrical Equipment sizing
KNPC
COMPANY. calculations, Complete Engineering of
Package Substations, Interfaces with
MAIN CONTRACTOR TECHNIP existing Facilities etc
As Technip Electrical Engineer, I
TAIL GAS TREATMENT UNIT AT prepared all Electrical Engineering
SHUAIBA REFINERY KNPC deliverables , Electrical Equipment sizing
KNPC
calculations, Complete Engineering of
MAIN CONTRACTOR TECHNIP Package Substations, Interfaces with
existing Facilities etc

Senior Electrical Engineer


Abu Dhabi Company for Petroleum Operations (ADNOC ONSHORE) October 2013 –
December 2016

 Successfully executed BAB EPC Projects ADCO Power distribution planning, Involved in BAB
Habshan-1 Development Project, BAB Integrated Facilities Project and other Projects of Oil
and Gas Processing facilities and Packages, FAT and ITP For various EPC Projects, Siemens
New Power Upgrade Project consisting of design, Procurement and Construction of 132 KV
Substations.
 Participated and actively contributed to Habshan-1 Project -Abu Dhabi Company for Onshore
Oil Operations (ADCO) intends to increase crude oil production from current production rate of
1.4 million barrels of oil per day (MMBOPD) to 1.8 MMBOPD. Winessed FAT for SCMS.
Substation Control and Monitoring System.
 Review, Approve Electrical Engineering sizing calculations, Preparation of Scope of works,
Endorsement of FEED Dossier, Site visit, data collection and identification of tie-in points,
Preparation of Electrical design basis, specifications, data sheets, Electrical equipment sizing
calculations, SLD’s single line diagrams, drawings, Earthing and grounding network, review of
vendor’s offers and prepared technical bid evaluation (TBE) for selection of suitable vendors.
Pre-Commissioning and Commissioning of Electrical facilities, Design of Cathodic Protection
System of pipelines SAT Witnessing FAT Factory Acceptance tests, Site Acceptance tests etc.
 Preparation of Load List, Transformer and HV and LV Cable Sizing Calculations, Sizing
Calculations for Electrical Equipment EDG Emergency Diesel Generator, AC & DC UPS Sizing,
Battery Sizing Calculations.

Lead Electrical Engineer
AMEC International UAE (Presently Known as Amec Foster Wheeler) Jan 2013 to
September 2013

 Load Schedules, Electrical equipment sizing, SLDs, Specifications, Calculations and


Layouts (Power, Lighting, Earthing and Equipment layouts), Tagged and Bulk MTOs. Power
Management System. Cable sizing calculations, Transformer and EDG Sizing Calculations,.
Material Requisition for Electrical Equipment- AC and DC UPS, Motor Control Centres,
Power Transformers, HV & LV Switchgears, Heat Tracing materials, earthing materials etc.

Page 5 of 9
Continued...

 TBAs for Long lead items, such as 3x10MWe Gas Turbine Generators, electrical inputs to
the mechanical packages such as Fire water pumps, Centrifugal pumps and LPG pumps,
1.25MVA DG sets, PMS system interface with ICSS/SACDA & Electrical Equipment and
ITBs & PMC services (reviewing for EPC Contractor’s documents and to ensure project
deliverables should meet the schedule). Progress meetings, co-coordinating with vendors
and Client, Man hour estimation for detail engineering work. Vendor document review for
Long lead Items, Speedy resolution to Vendor and Client Queries, EPC and Other
Contractor Bid review and rating/selection of potential Contractor at work.
Senior Electrical Engineer
Wood Group CCC (OMAN) 2011 to Dec 2012

 FEED, Detail Engineering for EPC Projects, Greater RIMA Development Projects,
Engineering design of 132/33 KV Substations, Fault level calculations, Protection studies,
Relay Setting Calculations, Relay Coordination Studies, Power System Analysis and
Protection, Single Line Diagram, Preparation of CT/VT Sizing Calculations, Protection and
Metering Single Line Diagrams, Earthing and Lighting Layout, Contributed to improvements
in Operational Safety and Reliability, Technical Support to Operations. Preparation and
review of detailed drawings deliverables –Electrical Load List, Block Diagrams, Earthing
installations, Cable routing, JB Layout etc
 of EHV Substations -400KV,220 KV & 132 KV Gas Insulated Substations- Power
Transformers, Shunt Reactors, Circuit Breakers, Switchgears, Current and Voltage
Transformers, Protection and Metering Diagrams, UPS, Battery Chargers, etc

 Transformer and HV and LV Cable Sizing Calculations, Sizing Calculations for Electrical
Equipment –Emergency Generator, UPS, Battery Sizing Calculations, Variable Frequency
Drives, Design of ESP, Crude pumping system for transit lines, Booster Pumps, Electrical
System Studies- Load Flow Calculations , Short Circuit Studies , Motor Starting Studies,
Transient Stability Studies etc.
 Preparation of Electrical Specifications and Data Sheets, Material Requisition for Electrical
Equipment- AC and DC UPS, Motor Control Centres, Power Transformers, HV & LV
Switchgears, Heat Tracing materials, earthing materials etc.
 Review and Approval of Vendor Submittals, Writing Procedures and Method Statements for
Critical Works Attending Coordination meetings with Client, Vendor and Subcontractor, SAT
Witnessing FAT Factory Acceptance tests, Site Acceptance tests etc

Senior Electrical Engineer


Kuwait Oil Company 2006 to 2011

 Supervised and directed a team of Engineers in Technical services related to design and
development of electrical systems and plants associated with the company’s oil and gas
production, developed large scale conceptual design options for electrical systems and
plants- power Generation, transmission and distribution, recommended and designed
studies for evaluation of most suitable and cost effective design concepts, Evaluation and
endorsement of several modification projects involving electrical systems, Carrying out the
Feasibility study for the various EPC Projects, Conceptual Engineering design and studies,
FEED for various Capital Projects related to enhancement of production, Project Design
Basis, raising the Consolidated Project proposal, Budget proposal, Ensured compliance of
company's QHSE policy and procedures. Conducted Several Pre-performance conference,
Kick-off Meeting for several EPC Projects. Preparation, Review and approval of Contract
documents of Electrical projects, Tender Specifications &contract documents for Contractors
and carries out technical evaluation of including technical & Contractual clarification to
bidders. Conducted Commercial evaluations and support Technical evaluations.

Page 6 of 9
Continued...

 Challenged several current standards of KOC and suggested several new techniques to
improve operating and maintenance performance, Identified and solved complex
multidisciplinary problems of various crude oil Gathering centres, Involved in FEED for Wara
reservoir Pressure Maintenance Projects, Load Flow and System Study for Wara Pressure
maintenance projects, Detailed Engineering Design, testing Commissioning of Protection
relay Systems, Schemes, and Relay Setting Calculations.
 Protection studies, , Power System Analysis and Protection ,Relay Setting Calculations,
Relay Coordination Studies, Protection studies, Protection Single Line Diagram, Preparation
of CT/VT Sizing Calculations, Protection and Metering Single Line Diagrams. Transformer
and Cable Sizing Calculations. Preparation of Complete Package for Condensate Recovery
Unit Variable Speed Driven Motors.
 Detailed Review of Electrical System Design Documents, Interconnection Diagrams,
Protective Relay Coordination of Substations, Load Flow Calculations , Short Circuit Studies
, Motor Starting Studies, Transient Stability Studies etc.
 Experience with Siemens Robicon make VFD Variable Frequency Drives, Induction Motors
etc
 SAFOP- Electrical Systems Safe Operability review, Participated in HAZOP/HAZID reviews
and recommendations for electrical network. Multidisciplinary Area Integrity/ Plant reliability
studies.
 Technical Bid Evaluation of GIS Substations, Engineering coordination for interfacing new
projects with the existing setup, Technical Bid Evaluation & review of Technical bid
documents. Controls the Engineering modifications and liaison regularly with Production and
HSE Departments.
 Ensuring plant integrity through development and implementation of Electrical Power
Generation and Distribution Inspection and Maintenance Strategies & Acceptance
Standards that are based on applicable international standards and statutory requirements.
Participating in HAZOP reviews and recommendations, Multidisciplinary Area Integrity/ Plant
reliability studies, Preparation and review of Maintenance Procedures.
 Preparation of Earthing and lighting layout, Review of design of Engineering system
associated with HV/MV/LV substations, SLD, Interconnection & Inter-trip diagrams,
Protection relay coordination study, Erection, commissioning, testing, Start-Up of HV/MV/LV
substations, gas compressors, Variable speed drives, Diesel Generator sets.
 Engineering coordination for interfacing new projects with the existing setup, Technical Bid
Evaluation & review of Technical bid documents.
 Review of design of Engineering system associated with HV/MV/LV substations, gas
compressors, Variable speed drives, motors, Diesel Generator sets, Cathodic protection of
pipelines.
 Supervising, Construction, Pre-Commissioning, Start-up, Commissioning of Production
facilities Projects, Plant start-up activities, Witnessing F.A.T, S.A.T, etc.
 Technical bid evaluation of different vendor offer and vendor drawing/ document review and
approval.

Electrical Engineer
Technip 2006 to 2007

 Engineering coordination and worked as interface engineer between Technip Abu Dhabi,
KNPC and Subcontractor.

Page 7 of 9
Continued...

 Undertaking Electrical System Study by ETAP; conducting the Modelling of Electrical


System, Short Circuit Analysis, Load Flow Analysis, Motor Starting Analysis, Relay Co-
ordination, Transformer Sizing & Cable Sizing
 Handling Protection Setting Calculation & CT/PT sizing; evolving One Line Diagram,
Protection One Line Diagram and Schematic Diagram as required Pre-Commissioning and
Commissioning of Electrical facilities. SAT Witnessing FAT Factory Acceptance tests, Site
Acceptance tests etc
Electrical Engineer
Ministry of Electricity and Water 2002 to 2006

 Design review, Approval of EHV Substations -400KV,220 KV & 132 KV Gas Insulated
Substations of ABB, Siemens, Mitsubishi, Hitachi .
 Pre-Commissioning and Commissioning of EHV Substations -400KV,220 KV & 132 KV Gas
Insulated Substations- Power Transformers, PMS- Power Management Systems, Shunt
Reactors, Circuit Breakers, Switchgears, Current and Voltage Transformers, Protection
Relays and Meters, UPS, Battery Chargers.
 Transmission and distribution planning, Protection studies, Power System Analysis and
Protection ,Relay Coordination Studies, Protection Single Line Diagram, Reviewed &
updated different electrical drawing on LV/MV/HV power system, cable schedule,
cable/equipment selection, control & PLC, Electrical System Study, Protection Coordination
Study & selection of proper switchgear for the feeder & load circuits of LV/MV system of the
plant.
 Detailed Engineering Design, Commissioning, Testing of GIS Substation of protective relay
systems, and review of protective relay settings. Microprocessor based relays of following
types: Transformer Differential protection relays, restricted earth fault relays, Feeder
Protection Relays, Solkor pilot wire differential protection relays and Bus bar Protection
Relays etc. AREVA make P Series relays.

Electrical Engineer

Electrical Utility Feeding to Petrochemical Plants in INDIA 1990 - 2001

 Protection studies, Relay Coordination Studies, Protection Single Line Diagram, Detailed
Engineering, Design, testing Commissioning of Protection relay Systems, Schemes, Relay
Setting Calculations.
 Preparation and review of CT/VT Sizing Calculations,Power System Analysis and
Protection, Protection and Metering Single Line Diagrams, Transformer and Cable Sizing
Calculations. Good knowledge of DC Motors used in Railway Traction, Pantograph, etc
 Preparation of scope of work for various types of project associated with High Voltage
substations, Preparation of Electrical Engineering design basis.
 Design of Earthing grid of substations. Preparation of Earthing and lighting layout, Review
Protection relay setting coordination study.
 Detailed Engineering Design, Commissioning, Testing of GIS Substation of protective relay
systems, and review of protective relay settings relays of following applications- Transformer
Differential protection relays, restricted earth fault relays, Feeder Protection Relays, Solkor
pilot wire differential protection relays and Bus bar Protection Relays etc.

Personal Details :
Name : Sabir Moidu
Current Address : Abu Dhabi, UAE.

Page 8 of 9
Continued...

Contact Number : +971568538176/971568538175


E-mail : sabirmoidu@yahoo.com
Date of Birth : 6th August 1967
Nationality : Indian
Marital Status : Married
Notice Period : 90 Days

Page 9 of 9

Das könnte Ihnen auch gefallen