Beruflich Dokumente
Kultur Dokumente
Finally, you can try this V8 keyin one from Deepak Malkan
level element select [level_name]
To fit the view and adjust the window to a fence, use the
keyin fit tofence.
You could use this to ...oh, I dunno, how about clip or print
part of a drawing based on a specific view size, or create
saved views of a specific size and shape?
Toggle Fill Display with one button
To quickly turn on and off the display of filled elements, stick this keyin
on a function key:
Clockwise: RV=-54.5,-54.5,-90
Counter-Clockwise: rv=-54.5,54.5,90
Start MicroStation without the splash screen
To display attached references of a design file without having to open MicroStation, do this:
Drag and drop a file from Windows Explorer onto the new icon.
Then press 1
Press 3 to exit.
Note, use the numbers above QWERTYUIOP on your keyboard, not those on the numberpad. Also, if you want .... you
can copy the results to the system clipboard file by clicking on the little Bentley logo in the top left corner and selecting
Edit > Select All and then press Enter.
Quickly turn on/off extension lines
Use the command change dimension extension toggle to quickly turn extension lines on or off.
You can use this command a couple of different ways. To toggle the display of all extension lines, first
put the dimension in a selection set and then execute the keyin as shown in the clip below.
Or, to toggle the display of individual extension lines, execute the keyin and then poke on the
extension line.
Oh yeah, you could also just use the keyin change dimension extension - All extension lines that were
on are turned off, and all extension lines that were off are turned on.