Beruflich Dokumente
Kultur Dokumente
RO membrane housing
2nd stage
Post carbon filter
REVERSE OSMOSIS SYSTEM
05 Front view 10
PURE-PRO
PURE-PRO
3 Let the water run for at least 30
minutes. This flushes the carbon
filters on first time use.
To the faucet
To the tank
To drain out tube
Input water
Side view
P URE PRO
DRINKING WATER SYSTEM P URE PRO
DRINKING WATER SYSTEM
Change membrane Tubing connection diagram
09 06
PURE-PRO
PURE-PRO
Faucet
Jaco
B
C
Drain
5 Remove the membrane by a pincer. 6 Install the membrane by carefully
pushing the spigot end into the
socket at the far end of the housing A
until completely in. D Tank
O O
PR EM
RE Input water
ST
SY
R
TE
WA
NG
P URE PRO
DRINKING WATER SYSTEM P URE PRO
DRINKING WATER SYSTEM
Installation diagram Change filters
Input water : Install water tank : 1 Turn off water source. 2 Switch off water tank.
Hand tighten plastic
To RO system shut-off valve to tank.
Then connect color
tubing.
Deliver valve
To faucet
REVERSE OSMOSIS SYSTEM
Install European ceramic faucet : Install drain saddle : 3 Loose the Jaco fitting anticlockwise. 4 Remove the used filters from clips
and replace with new ones.
Drill a 1/4" hole into
the drain pipe.
Jaco
07 08
PURE-PRO
PURE-PRO
Mount drain
saddle aligning
holes.
P URE PRO
DRINKING WATER SYSTEM P URE PRO
DRINKING WATER SYSTEM