Beruflich Dokumente
Kultur Dokumente
CuZn30
C26000
Mechanical Properties
Tensile Strength Rm MPa 270 – 350 350 – 430 410 – 490 480 – 560 550 – 640 ≥630
Yield Strength Rp0.2 MPa ≤ 160 ≥ 170 ≥ 260 ≥ 430 ≥ 500 -
Elongation A50 mm % ≥ 40 ≥ 21 ≥9 ≥4 - -
Hardness HV 55 – 90 95 – 125 120 – 155 150 – 180 170 – 200 ≥190
o
Bendability 90 Good Way /
0/0 0/0 0/0 0 / 0.5 1/2 2/6
Relative Bending Radius r/t** Bad Way
** strip thickness t ≤ 0.5 mm
Special Characteristics
Mason Alloy-M30 is one of the most significant copper alloys in industrial use. Alloy-M30 provides an
outstanding combination of cost-effectiveness, manufacturing properties and mechanical strength. In
addition to the above-mentioned applications, Alloy-M30 is also particularly suitable for many stamping,
connector and ammunition applications.
Issue 1.1
May 2017
B Mason & Sons Ltd, Wharf Street, Aston, Birmingham, B6 5SA, UK
Tel: +44 (0) 121 327 0181 / Fax: +44 (0) 121 322 8338
info@bmason.co.uk / www.bmason.co.uk
All information and recommendations given here are based on research and believed to be accurate but are not guaranteed. Our goods are sold on the understanding that
the user is solely responsible for determining their suitability for any purpose. This information is not to be copied or distributed to any third party without the written consent
of B. Mason & Sons Ltd.