Beruflich Dokumente
Kultur Dokumente
Secret
Internal use only
Public
Webinar Stylish
Content
A. Indoor unit
1. Installation
2. New functions
3. Components
4. Removal procedures
5. New error codes
6. Options
7. Field settings
B. Outdoor units
1. RXA-A
2. MXM-M
Range :
Additional information Always use ALL screws to avoid noise problems !!!
Modem/W-LAN
Internet
WPS button
Modem/W-LAN
Internet
Modem/W-LAN
Internet
M1S / S400 :
big swingflap motor
A5P / S600:
humidity sensor(not promoted)
& Indoor room sensor R2T
2) Remove screw
3) Lose connector
4) Remove casing
!!!
To set a different address In case 2 indoor units are installed in 1 room, different
addresses for 2 users can be set
Thermo off cooling : fan on/off When set temperature in cooling is reached , unit goes in
thermo off and the fan stops running. Use this setting to keep
the fan running
Autorestart After a power failure the unit automatically start up again. To
change this, set unit in “autorestart off”
Heating only Set unit in heating only mode (no cooling possible)
Cooling only Set unit in cooling only mode (no heating possible)
Adjust target set temperature in When there is a big difference between the indoor room
heating operation temperature and the set temperature in heating mode, adjust
the target set temperatue.
WHAT ?
HOW ?
Multi’s