Sie sind auf Seite 1von 2

M 201

Dynamic Microphone
Order # 406.910

FEATURES TECHNICAL SPECIFICATIONS


• Hypercardioid polar pattern Transducer type . . . . . . . . . . . . . . . . Dynamic
• Clarity, neutrality and superior intelligibility Operating principle . . . . . . . . . . . . . Pressure gradient
• Low-mass moving coil transducer Polar pattern . . . . . . . . . . . . . . . . . . Hypercardioid
• Rugged construction Frequency response . . . . . . . . . . . . . 40 - 18,000 Hz
• Integrated hum-buck coil Rear attenuation at 1 kHz . . . . . . . . > 20 dB at 120°
Open circuit voltage . . . . . . . . . . . . . 1.2 mV/Pa (-58 dBV)
Magnetic field suspension . . . . . . . . > 18 dB at 50 Hz
Nominal impedance . . . . . . . . . . . . . 200 Ω
Load impedance. . . . . . . . . . . . . . . . ≥ 1000 Ω
APPLICATIONS Diaphragm . . . . . . . . . . . . . . . . . . . . Hostaphan®
Case/finish . . . . . . . . . . . . . . . . . . . . Brass
The M 201’s unique construction reduces handling noise to a
Connector . . . . . . . . . . . . . . . . . . . . XLR, 3-pin, male
minimum, giving excellent results as an audience response micro-
Dimensions:
phone in TV studios and for location production of vocals and sound
Length . . . . . . . . . . . . . . . . . . . . . 160 mm
effects. Its uniform response and small size make it especially
Shaft diameter . . . . . . . . . . . . . . . 24 mm
effective for recording and reinforcing snare drums, hi-hats, rack
Head diameter . . . . . . . . . . . . . . . 24 mm
toms and percussion. It also works well with banjos and acoustic
Weight. . . . . . . . . . . . . . . . . . . . . . . 220 g
guitars.

SUPPLIED ACCESSORIES OPTIONAL ACCESSORIES


MKV 8 Microphone clamp BMC 05 FM Standard microphone cable
with 3/8" and 5/8" internal thread, XLR-XLR, 5 m long . . . . . . . . Order # 434.787
for shaft diameters BMC 10 FM Standard microphone cable
of 22 - 32 mm . . . . . . . . . . . Order # 247.952 XLR-XLR, 10 m long . . . . . . . Order # 434.795
WS 101 AZ Wind shield, charcoal-grey . . Order # 111.244 GST 500 Microphone stand 3/8",
height 0.85-1.60 m,
with telescopic boom . . . . . . Order # 406.252
GST 590 Microphone stand 3/8",
height 0.34-0.60 m,
with telescopic boom . . . . . . Order # 418.765
EA 19/25 Elastic suspension for shaft
diameter of 19 - 25 mm,
with MKV 11 microphone
clamp . . . . . . . . . . . . . . . . . . Order # 407.194

1 von 2

beyerdynamic GmbH & Co. KG


Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204
info@beyerdynamic.de | www.beyerdynamic.com

Weitere Vertriebspartner weltweit finden Sie im Internet unter www.beyerdynamic.com


Abbildungen nicht vertragsbindend. Änderungen vorbehalten. E4/M 201 (04.18)
M 201

FREQUENCY RESPONSE & POLAR PATTERN


This frequency response curve (measuring tolerance ± 2.5 dB) and polar pattern correspond to a typical production sample for this microphone.

Sollfrequenzkurve
Frequency ±2,5 dB ± 2,5 dB
response M 201
M 201 0 dB 0=dB = 1,2
1.2 mV/Pa
mV/Pa

+16

+8 2 cm

0dB
10 cm

-8
1m

-16

20 50 100 200 500 1000 2000 5000 10000 20000 Hz

330 30

-5dB

-10
WIRING DIAGRAM
300 60

-15 ge
yellow
3
-20

270 90

125 Hz 1000 Hz
1

250 Hz 2000 Hz
240 120
500 Hz 4000 Hz 2
rt
red
1000 Hz 8000 Hz
210 150

180

2 von 2

beyerdynamic GmbH & Co. KG


Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204
info@beyerdynamic.de | www.beyerdynamic.com

Weitere Vertriebspartner weltweit finden Sie im Internet unter www.beyerdynamic.com


Abbildungen nicht vertragsbindend. Änderungen vorbehalten. E4/M 201 (04.18)

Das könnte Ihnen auch gefallen