Beruflich Dokumente
Kultur Dokumente
Which components should be swapped to the new Storage Processors during a Data-
in-Place conversion?
7.Which task must be performed on the storage system in order to access a file
8.What is the maximum number of Thin Clones and snapshots per Base LUN that can be
created?
A. 8
B. 16
C. 64
D. 256
11.A storage team is tasked with using SANCopy and File Import to migrate from a
VNX to a Dell EMC Unity system. How does this Unity feature handle deduplicated
data?
A. Dell EMC Unity Data Reduction is not supported for migrations using SANCopy or
File import.
B. If Data reduction is enabled on the Dell EMC Unity target, the VNX data being
C. When the VNX source has deduplication enabled, SANCopy and File Import will by
D. If Data reduction is enabled on the Dell EMC Unity target, deduplicated data
from the VNX source is written directly to the target Dell EMC Unity pool.
13.What are the minimum and maximum recovery point objectives (RPOs) configurable
A. Minimum = 1 min
Maximum = 1440 min
B. Minimum = 5 min
C. Minimum = 5 min
Maximum = 60 min
D. Minimum = 1 min
Maximum = 60 min
14.A storage administrator needs to configure remote logging. Which file do they
need to edit?
management on the effectiveness of the Dell EMC Unity Data Reduction feature.
How often are the data reduction system efficiency metrics updated within
Unisphere?
Every 5 min
Every 10 min
Every 30 min
Every 60 min
16A storage administrator has a DR solution that synchronously replicates a LUN
from a Site A production Dell EMC Unity system to a destination Dell EMC Unity at
What operations would be performed to provide data access during the outage window
sessions?
C. Failover, Resume
D .Failback, Resume
18.Where in Unisphere can a storage administrator find information about the drive
19.A storage administrator is tasked with converting a LUN from thin to thick. They
A. Local LUN Move tool can move a LUN between different pools or within the same
pool of a system
B. Local LUN Move operation will cause a major performance impact on data access
C. Local LUN Move tool requires data reduction to be disabled during the move
D. Local LUN Move tool cannot move a LUN within the same pool; admin will need to
arrays?
C. IQN aliases are automatically generated when the iSCSI interface is created.
D. An iSCSI interface can be created with both an IPv4 and IPv6 IP address.
22.Which storage pool object is created for every Private LUN in a traditional
pool?
B. Array Slice
23.A NAS Server has multiple IP interfaces configured. The preferred production
24.Which ports are required to be open for Outbound Only Integrated ESRS
configuration?
A. 443 and 8443
D. 80 and 443
25.You are creating a dynamic pool using eight drives in the Unisphere GUI. Which
RAID stripe width will be set when creating the dynamic pool using RAID 1/0?
A. 1+1
B. 2+2
C. 3+3
D. 4+4
26.What capability is available only in UEMCLI or REST API for traditional pools on
A. Creating
B. Expanding
C. Viewing
D. Managing
27.What is a feature of the Dell EMC Unity UFS64 Enterprise File System
architecture?
28.Which Dell EMC Unity system configuration can be performed using the Unisphere
29.A storage administrator is moving a NAS Server to the peer SP. What is a
existing NAS Server and its associated file systems on a Dell EMC Unity system.
The system will automatically create a session for the NAS Server.
Then manually create replication sessions on each of the associated file systems.
31. Which host will automatically register on a Dell EMC Unity array?
C. ESXi
session?
33.A storage administrator has configured a Host I/O Burst Limit Policy with the
following parameters:
How many extra IOs will be allowed, per one-hour period, for this policy?
A. 600
B. 1,200
C. 6,000
D. 60,000
34.How far in advance of license expiration does Dell EMC UnityVSA issue the first
7 days
14 days
1 month
2 months
Auto-Tier
36.What can be used to configure a static management IPv4 address on a Dell EMC
Unity array?
DHCP
38.A user encounters communication interruptions between Unisphere and a Dell EMC
Unity storage system. What is the first recommended action to resolve this issue?
Select Reinitialize
A. Host IO Size
B. Tiering Policy
C. NAS Server
D. Minimum Allocation Size
41.A company needs to expand their dynamic pool by 3 TB. The current dynamic pool
consists of sixty-three 1.9 TB SSD drives that are configured for RAID5 8+1.
What is the minimum number of drives needed for the pool expansion?
10
11
42.What types of advanced static routes can be created for NAS Server interfaces?
Data
Swap
Memory
Config
4 All writes to the LUN are suspended until the snap operation completes.
46.Which Dell EMC Unity storage resources and models support the Host I/O Limits
feature?
47.What functionality is provided to Dell EMC Unity from its integration with CTA?
Synchronous disaster recovery solution for Dell EMC Unity file storage
Data migration solution for VNX block storage to Dell EMC Unity
49.A storage administrator managing a Dell EMC UnityVSA system licensed for 25 TB
Expiration alert messages begin once capacity reaches the 95% threshold limit.
Expiration alert messages begin once capacity reaches the 75% threshold limit.
Expiration alert messages begin one month before the license expiration date.
Expiration alert messages begin one month before the license expiration date.
VMware ESXi
51.You are creating a host configuration for NFS clients. Which parameter is
optional?
Tenants
Host name
Network address
Profile type
53.A storage administrator wants to utilize VVols on an existing Dell EMC Unity
array. What needs to be done to configure VVols using an existing storage pool?
54. When the LUN Snapshot Restore operation is performed, what does the Dell EMC
55. A Dell EMC Unity Storage Processor fails to come online after reboot. How can a
Connect to Dell EMC Unity service port, and use the ipmi tool
Connect to Dell EMC Unity IDRAC port, and use the web console
Connect to Dell EMC Unity USB port, and use the service console
57. A Dell EMC Unity system is configured with 20 x 16 Gb/s FC active ports at
replication?
A. SPA FC Port 4
SPB FC Port 4
D. SPA FC Port 5
SPB FC Port 5
Alert:
60. What is a rule for configuring host to storage connectivity for block access?
When connecting a host to different Dell EMC Unity storage arrays, different access
When connecting a host to any single Dell EMC Unity storage array, hosts with CNAs
When connecting a host to any single Dell EMC Unity storage array, only one access
When connecting a host to different Dell EMC Unity storage arrays, a single fabric
Failover, Resume
Failback, Resume
8.
Dell EMC Unity arrays can be monitored by which centralized management tools?
17.
Where in Unisphere can a storage administrator find information about the drive count capabilities for
the system?
If Data reduction is enabled on the Dell EMC Unity target, the VNX data being migrated is
deduplicated and compressed as it is written to the target pool.
20.
What are the minimum and maximum recovery point objectives (RPOs) configurable when using Dell
EMC Unity native asynchronous replication?
Minimum = 1 min
Maximum = 60 min
Minimum = 5 min
Minimum = 5 min
Maximum = 60 min
Minimum = 1 min
A Dell EMC Unity Storage Processor fails to come online after reboot. How can a storage administrator
use their laptop to monitor the boot sequence?
Connect to Dell EMC Unity IDRAC port, and use the web console
Connect to Dell EMC Unity USB port, and use the service console
Connect to Dell EMC Unity service port, and use the ipmi tool
A system administrator is configuring asynchronous remote replication for an existing NAS Server and its
associated file systems on a Dell EMC Unity system. What action(s) need to be taken?
The system will automatically create sessions for the associated file systems.
Then manually create replication sessions on each of the associated file systems.
The system will automatically create a session for the NAS Server.
A storage administrator is tasked with converting a LUN from thin to thick. They will utilize the native
Local LUN Move feature.
Local LUN Move tool can move a LUN between different pools or within the same pool of a system 3
24.
Which protocols are supported on the two on-board CNA ports within each Dell EMC Unity storage
processor?
iSCSI at 10 Gb/s
iSCSI at 10 Gb/s
FCoE at 10 Gb/s
iSCSI at 10 Gb/s
25.
A storage administrator needs to monitor system efficiency metrics to report to management on the
effectiveness of the Dell EMC Unity Data Reduction feature.
How often are the data reduction system efficiency metrics updated within Unisphere?
Every 5 min
Every 10 min
Every 30 min
Every 60 min
Which Dell EMC Unity system configuration can be performed using the Unisphere Initial Configuration
wizard?
27.
What is a feature of the Dell EMC Unity UFS64 Enterprise File System architecture?
Provides space reclamation of unused blocks
28.
What is the maximum number of Thin Clones and snapshots per Base LUN that can be created?
256
29.
When the LUN Snapshot Restore operation is performed, what does the Dell EMC Unity system
automatically do before beginning the restoration process?
30.
Which component of FAST Cache contains information for all blocks of data currently residing in FAST
Cache?
Memory Map
31.
A storage administrator has configured a Host I/O Burst Limit Policy with the following parameters:
Absolute Limit = 1000 IOPS
How many extra IOs will be allowed, per one-hour period, for this policy?
60,000
You are creating a dynamic pool using eight drives in the Unisphere GUI. Which RAID stripe width will be
set when creating the dynamic pool using RAID 1/0?
3+3
35.
What is th napshot Restore operation is performed, what does the Dell EMC Unity system automatically
do before beginning the ogy?
17
What is a rule for configuring host to storage connectivity for block access?
When connecting a host to any single Dell EMC Unity storage array, only one access protocol must be
used.
37.
A storage administrator is moving a NAS Server to the peer SP. What is a consideration for the
operation?
38.
Increases bandwidth
Improves security
Auto-Tier
What can be used to configure a static management IPv4 address on a Dell EMC Unity array?
Auto-Tier
Lowest Tier
A user encounters communication interruptions between Unisphere and a Dell EMC Unity storage
system. What is the first recommended action to resolve this issue?
Which components should be swapped to the new Storage Processors during a Data-in-Place
conversion?
A storage administrator wants to utilize VVols on an existing Dell EMC Unity array. What needs to be
done to configure VVols using an existing storage pool?
Auto-Tier
47.
You are creating a host configuration for NFS clients. Which parameter is optional?
Tenants
What functionality is provided to Dell EMC Unity from its integration with CTA?
A NAS Server has multiple IP interfaces configured. The preferred production interface has become
inactive.
50.
Which ports are required to be open for Outbound Only Integrated ESRS configuration?
51.
A Dell EMC Unity system is configured with 20 x 16 Gb/s FC active ports at installation. By default, which
ports are configured to support synchronous replication?
SPA FC Port 4
SPB FC Port 4
A company needs to expand their dynamic pool by 3 TB. The current dynamic pool consists of sixty-three
1.9 TB SSD drives that are configured for RAID5 8+1.
What is the minimum number of drives needed for the pool expansion?
11
4231
A storage administrator needs to configure remote logging. Which file do they need to edit?
56.
Which task must be performed on the storage system in order to access a file system read/write
snapshot?
57.
What is a characteristic of the iSCSI interface on Dell EMC Unity storage arrays?
IQN aliases are automatically generated when the iSCSI interface is created.
What types of advanced static routes can be created for NAS Server interfaces?
Citrix XenServer
Oracle VM
VMware ESXi
Microsoft HyperV
What capability is available only in UEMCLI or REST API for traditional pools on a Dell EMC Unity All-Flash
storage array?
Creating
43.
A storage administrator wants to asynchronously replicate a LUN with Data Reduction enabled from the
primary site to a Dell EMC Unity at the secondary site. Which statement describes this operation?
The source data is restored to its original size, then replicated to the destination. Commented [VN2]: sai
What is a Dell EMC best practice to achieve maximum iSCSI throughput on a Dell EMC Unity
array?