Beruflich Dokumente
Kultur Dokumente
Page 1 of 6
Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320 GC EXCAVATOR KTN
Configuration: 320 GC Excavator KTN00001-UP (MACHINE) POWERED BY C4.4 Engine
Systems Operation
Next Generation Hydraulic Excavator Monitoring System
Media Number -M0081165-01 Publication Date -01/08/2015 Date Updated -13/03/2018
i07105794
Warning Operation
SMCS - 7490
Event Indicator Area toward the top of the Monitoring System Display
Illustration 1 g06226416
(1) Pop-up Event Message
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 7/13/2019
320 GC Excavator KTN00001-UP (MACHINE) POWERED BY C4.4 Engine(M008523... Page 2 of 6
Illustration 2 g06226443
(2) Event Icon List
The Monitor will activate, display, and log events for machine conditions that are not within normal
operating parameters. The Monitor will detect some of the events that are not within normal operating
parameters. However, many of these events are detected by the other control modules on the machine.
The Monitor receives this event data from the other control modules via the Cat® Data Link. The level
of the warning response will be determined depending on the severity of the problem. The event
warnings are classified into three warning levels. The warning level determines which response is
required by the operator. Warning Level 1 represents the least severe problem and Warning Level 3
represents the most severe problem. The warning levels, monitor response, and the required operator
actions are given below.
Warning Level 2 - Graphic Display and Action Lamp - requires a change in the operation of the
machine or a change in the maintenance of the machine to correct the condition.
Warning Level 3 - Graphic Display, Action Lamp, and Action Alarm - requires immediate shutdown
of the machine to prevent damage to the machine or personnel.
When multiple warnings are present in the system, the highest warning level is shown first. Press the
arrow keys to view all the logged warnings. If no keys are pressed within 5 seconds, the display will
return to the highest level warning.
Note: All the warnings that are listed may not be applicable to all machine models.
Table 1
Warning Messages
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 7/13/2019
320 GC Excavator KTN00001-UP (MACHINE) POWERED BY C4.4 Engine(M008523... Page 3 of 6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 7/13/2019
320 GC Excavator KTN00001-UP (MACHINE) POWERED BY C4.4 Engine(M008523... Page 4 of 6
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 7/13/2019
320 GC Excavator KTN00001-UP (MACHINE) POWERED BY C4.4 Engine(M008523... Page 5 of 6
Illustration 3 g06223816
The Event Icon List display all active events. The list orders the higher-level warnings first, with the
red furthest left, and grey furthest right. The current selected icon will be highlighted with yellow bow
surrounding the icon. Turn the jog dial left and right to change the highlighted icon and press down on
the jog dial to navigate to the highlighted icon pop-up message.
Arrows will appear at either side of the icon list if there are too many icons to display on a single bar.
The arrow will navigate to the next set of icons instantly rather than the next icon from the bold one.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 7/13/2019
320 GC Excavator KTN00001-UP (MACHINE) POWERED BY C4.4 Engine(M008523... Page 6 of 6
Copyright 1993 - 2019 Caterpillar Inc. Sat Jul 13 23:52:49 UTC+0700 2019
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/... 7/13/2019