Beruflich Dokumente
Kultur Dokumente
Water Technologies
Ultra Clear™ Compact Series Systems
The Ultra Clear™ Compact RO DI Series Systems Compact system - reverse osmosis, deionization and
product water quality exceeds ASTM Type II and ISO 30l tank combined in one unit. Two flowrates – four
3696 Type II. choices.
2
Solenoid valve Pre-Filter Conductivity
and RO-Module measurement
UV-lamp
Pump Option
Storage tank
for 30 l
Water outlet
DI module
Restrictor
Conductivity
measurement
Ultra Clear™ Compact RO Series System (15 LPH) Ultra Clear™ Compact RO DI Series System (15 LPH) flowsheet
flowsheet
Clear advantages:
n 30 l tank is integrated Feedwater specification
n Space saving Feed water pressure bar 0.1 – 5
Feed conductivity µS/cm < 1400
n Easy to use
Colloid Index SDI < 3
n Digital display and controller Free Chlorine and Fe mg/l 0.1
n One DI cartridge for all DI-systems
n Plug and play
n Quality control of RO permeate in all units
Options
n Reduction rate for particles and
Item Cat. No.
bacteria > 99%
UV-Lamp 2594-1
n Pure water quality <0,1 µS/cm for all DI units
Wall bracket 3316
CO2 trap with vent filter 3501-1
3
Ultra Clear™ RO Series Systems
Most systems on the market have less than 20% recovery. Automatic, user-friendly
maintenance alerts notify the operator when system service is required.
The Ultra Clear™ RO Series System The Ultra Clear™ RO Series System Recovery rates up to 75% are possible
produces high quality water with very uses the newest pump technology, with optional water softening.
low energy consumption. The use of which runs without the traditional
“low energy“ membranes provide very e-motor, and operates nearly Product water recovery is set up to an
efficient and economical operation. noiseless (systems 20-100). Due to astounding 50% from the factory,
High quality material standards an integrated automatic membrane therefore, Ultra Clear™ RO Series
guarantee long service life. rinse cycle, in many cases, the Systems also conserve water.
systems can operate on untreated
city water.
Ultra Clear™ RO Series System 10 20 40 60 100 200
Product water performance
Production rate at 15°C LPH 10 20 40 60 100 200
Rejection rate % > 96 98 – 99 98 – 99 98 – 99 98 – 99 98 – 99
Rejection rate for bacteria % > 99 > 99 > 99 > 99 > 99 > 99
Rejection rate for particles % > 99 > 99 > 99 > 99 > 99 > 99
Feed water specification
Feed water pressure bar 0.1 - 5 2–6 2–6 2–6 2–6 2–6
Feed conductivity max.* µS/cm < 2000 < 2000 < 2000 < 2000 < 2000 < 2000
Colloid Index SDI <3 <3 <3 <3 <3 <3
Free Chlorine and Fe mg/l < 0.5 < 0.1 < 0.1 < 0.1 < 0.1 < 0.1
Shipping weight kg 26 31 32 33 35 75
Power consumption kWh 0.05 0.2 0.2 0.2 0.2 0.55
Power supply V/Hz 110 – 230/50 – 60
Dimensions: H/W/D mm 530/340/320 530/340/420 1320/340/420
Catalog Number 3000 3001 3002 3003 3005 3006
*For feed conductivity up to 3500 μS/cm, 2-pass Ultra Clear RO systems are available on request.
4
Ultra Clear™ RO Series Ultra Clear™ RO Series System Ultra Clear™ RO Series System
System
5
Ultra Clear™ RO DI Series Systems
Ultra Clear™ RO DI Series System – final ion exchange polishing Type II water – you select the system size.
The Ultra Clear™ RO DI Series from a 400 μS/cm feed water source replacing at a frequency dependant
System delivers permeate would still have a conductivity of on feed water quality and water
water with a salt reduction of about 8 μS/cm. The Ultra Clear™ RO consumption. A changing interval
approximately 98%. DI Series System polishes this water of about 3 months is typical. The DI
to < 0.1 μS/cm. modules are a lower cost alternative
The Ultra Clear™ RO DI Series to electro-deionization systems such
System will polish the RO The deionization module is as our Ultra ClearTM RO EDI Systems.
permeate to a quality of <0.1 μS/ delivered with the Ultra Clear™ RO
cm. At a 98% rejection rate, the DI Series System. These modules The high quality resin used in our
RO permeate water that originated are directional and will require DI module combines mechanical
6
Solenoid
valve Pretreatment Pressure gauge Pressure control
module AMB RO-Modules
Pressure
switch Booster pump
Check valve
Solenoid
valve Conductivity
measurement
Restrictor
DI-Module VMD
Option
Pressure
Distribution switch
Conductivity pump
measurement
7
Ultra Clear™ RO EDI Series Systems
The successful Ultra Clear™ RO EDI The Ultra Clear™ RO EDI Series Systems. As pioneers in the electro-
Series Systems combines leading Systems is characterized by low deionization field, we can make your
edge technology and modern energy consumption, high-product decisions easy. El-Ion® cells do not
design. The name stands for the water yield, and economical require regeneration chemicals as do
high quality purified water produced operation. The latest pump mixed bed ion exchangers. El-Ion®
by the El-Ion® cells combined with technology with an almost silent modules also use less rinse water
proven reverse osmosis technology. motor, is another highlight of than competitive systems.
our Ultra Clear™ RO EDI Series
8
Solenoid
valve Pretreatment Pressure gauge Pressure control
module AMB RO-Modules
Pressure
switch Booster pump
Solenoid
valve
Check valve
Conditioning
module Conductivity
measurement
Restrictor
El-Ion®
cell
Option
Pressure
Distribution switch
Conductivity pump
measurement
to <0.02 EU/ml and significant n Feed for autoclaves and environmental chambers
n Spectrophotometry
n Electrophoreses
9
Ultra Clear™ RO EDI Series Systems
This electro-deionization process, levels. There is no other product as regenerated if the maximum
which makes it possible to greatly capable and compact. acceptable conductivity is reached.
improve the quality of the reverse
osmosis permeate, was invented Comparison: If using the El-Ion® electro-
and patented at the Jülich research Ion exchange and the El-Ion® deionization module, the product
center. As licensees of this electro-deionization module water quality is constantly at the
technology, we have developed This diagram shows clearly what highest level.
the process to the highest industry modern technology can do.
standards. Since1994, the No regeneration, no quality
technology has been identified When a mixed bed polishing variation. Simply high quality water
under the El-Ion® brand name. This module is used, the conductivity of at any time.
unique technology has the ability the product water increases during
to reduce bacteria, oxidize TOC, normal operation and exhaustion.
and handle higher than normal CO2 The resin has to be changed or
100,00
10,00
system outlet [µS/cm]
Ix-resin
Conductivity
El-Ion ® module
1,00
0,10
0,01
20 40 60 80 100 120 140
Time in days
10
El-Ion® Module, pure water output El-Ion® Module, pure water output 40
10 l/h to 55 l/h
El-Ion® Module create an electric potential in the regenerated without the use of
Our electro-deionization module water that is unsuitable for bacteria any acids or alkali. The energy
use resin chambers in a single bed to live in. The intermediate pH shift consumption of this process is very
configuration to further deionize in the cells creates a positive effect low and serves as an advantage
the water. Microbiological analysis for the removal of SiO2 and CO2. for the environment - no chemicals
has proven a remarkable reduction and low power consumption.
in the number of bacteria with high An added advantage of electro-
CFU counts in the feed water. The deionization is continuous
electrodes that contact the resin operation. The resin is continually
SO4 2–
Ca 2+
salts
Cl –
concentrate
H2O + O2
H
+
Mg2+
HCO3 – OH
– –
H2
cation Na + CO 3 2– anion
semipermeable exchange exchange
membrane chamber chamber
HSiO 3 –
H+
OH –
pure water /
permeate
dissolved salts
1–2%
drain concentrate
chamber
conductivity: 2 – 30 µS/cm ultra pure water: 0.055 µS/cm
11
Ultra Clear™ AFU Series Systems
The specialist when it comes to purified water, water purification systems for clinical analyzers.
Clinical Analyzers can only perform analyzer test results. This is why an rates of 10 and 20 LPH.
precise and repeatable tests if the analyzer feed unit is so important All systems combine a pre-
feed water supplied to them is for tap water purification. purification module, RO
of the highest quality. Tap water membranes, a polishing mixed bed
contains different impurities like The AFU unit uses multiple cartridge, a sterile filter and a UV
salt, organics, particles, silica and technologies to produce disinfection chamber.
bacteria that can interfere with the consistently pure water at flow
12
RO Modules Solenoid
valve
Restrictor
Booster pump
Conductivity
measurement Pretreatment
module AMB
Sterile
filter
Ultra Clear™ AFU with larger output Ultra Clear™ AFU Series System flowsheet
available on request.
CO2 Trap
13
Ultra Clear™ AFU EDI Series Systems
Ultra Clear™ AFU EDI with 60 l tank Ultra Clear™ AFU EDI with 80 l tank
In order to ensure precise and Ultra Clear™ AFU EDI Series System 10 20
accurate data from a Clinical
Product water performance
Analyzer, it is essential to have a
Production rate at 15°C LPH 10 20
constant supply of high quality
purified water for the instrument. Pure water performance l/min 1 1
The Analyzer Feed Units (AFU) with counter pressure bar/psig 2/29 2/29
have been conceptually designed Conductivity at 25°C µS/cm 0.06 – 0.2 0.06 – 0.2
to deliver purified water for years. Resistivity at 25°C MΩ-cm 5 – 16.7 5 – 16.7
Typical TOC-level ppb < 30 < 30
You should expect a conductivity
Bacteria cfu/ml <1 <1
range of 0.06–0.2 μS/cm without
Particle > 0.2 µm per ml <1 <1
the extreme fluctuations in quality
typically observed with deionizer Feed water specification
cartridges. The Analyzer Feed Units Feed water pressure bar 0.1 – 5 0.1 – 5
are capable of producing purified Feed conductivity µS/cm < 1400 < 1400
water with a TOC value < 30 ppb Colloid Index SDI <3 <3
for the most demanding clinical Free Chlorine and Fe mg/l < 0.5 < 0.1
applications.
Shipping weight 30 l / 60 l / 80 l kg 45 / 47 / 58 47 / 49/ 60
Power supply V/Hz 100 – 240 / 50 – 60
To assure continuous water quality,
all main purifying components and Dimensions: H/W/D 30 l tank mm 530 / 640 / 320
parts that are in direct contactwith Dimensions: H/W/D 60 l tank mm 530 / 900 / 320
the product water are made of Dimensions: H/W/D 80 l tank mm 1340 / 340 / 580
high quality plastic, Teflon and Catalog No. 30 l tank 3101-E 3103-E
stainless steel. Catalog No. 60 l tank 3100-E 3102-E
Catalog No. 80 l tank 3100-E/80 3102-E/80
14
Conditioning
Module RO Modules
El-Ion® Solenoid
Cell Restrictor valve
Booster
pump
Pretreatment
module AMB
Conductivity
Restrictor measurement
Sterile
Check filter
valve
This reduces or eliminates the poten- wall mounted. Optionally, a wall All systems display inlet and product
tial for contaminants to leach into assembling set for the 30, 60 and water quality. The salt reduction
the water stream from the plumb- 80l storage tank can be delivered. rate will be shown in percentage.
ing. Water is continuously re-circu-
lated with in the system to maintain Consumables Ultra Clear AFU
the highest quality on demand. Item Change frequency Cat. No.
Pretreatment Module AMB 6-monthly* 2057
The integrated booster pump pro-
DI-Module VMD 3-monthly* 2050
vides up to 2 bar (29 psig) of water
delivery pressure. The pure water Conditioning Module Change frequency depends on
water hardness and amount of
quality exceeds the CLSI Type 1, ISO use dwater. Please enter your
3696 Grade 1, ASTM D1193 Type III 2062
actual hardness at the controller
standards. and the change frequency will
be shown automatically.
The analyzer feed units come with 0.1 µ minline filter 1000 cm2 6 monthly 2052
storage tanks of 30, 60 or 80l CO2 Trap CT1 and vent filter
yearly 3502
capacity and can be directly con- (replacement cartridge)
nected to tap water. The reverse UV-Replacement bulb yearly
osmosis systems produce 10 or – for 30 liter tanks 2595-1
20l/h. Product water flow rate is 1l/ – for 60 liter tanks 2596-1
min. All storage tanks are made of
– for 80 liter tanks 2597-1
FDA grade polyethylene.
RO Replacement Module** 2 – 3 years 2083
15
Storage Tanks
All PE tanks are 100 % drainable. Accessories like UV Storage tank – 80 liter
lamp, CO2 traps, sterile filter and TOC reduction pads are The Ultra Clear storage tank is designed in harmony with
available to protect your water your water. Distribution the Ultra Clear RO system. Both components present an
pumps available. aesthetic and functional unit.
Storage tanks – 30 liter and 60 liter n A high grade steel pump with sufficient performance to
These purified water resistant polyethylene tanks match provide automatic laboratory rinse units.
the design of our Ultra Clear reverse osmosis systems. They n Independent pressure control and protection against dry
can operate on a lab bench or can be mounted on a wall. running of the pump.
Connections are available for filling an automatic laboratory
n A level sensor provides a continuous display of the tank
washing machine. A faucet can be placed at the bottom or
fill level in percent.
middle of the tank for convenient use. The middle position
allows a reserve of water for an adjustable laboratory n Sterile air filter for the tank and CO2 traps are available as
washing machine. Level control sensor is included with two options.
free selectable switch points for automatic on / off of the n Tank material is purified water resistant polyethylene.
Ultra Clear reverse osmosis system. n 100% drainable.
16
Storage Tanks for Ultra Clear™ RO, RO DI, RO EDI and AFU Series Systems
Type 30 l 60 l 80 l 80 l
Tank volume l app. 30 app. 60 app. 80 app. 80
Power supply V/Hz/kW – – 230/50/0.55 230/50/0.55
Pump performance l/min – – 8 1.2
with counter pressure bar – – 2 2
Level Sensor mA 4 – 20 4 – 20 4 – 20 4 – 20
Height mm 555 555 810 810
Width mm 300 560 340 340
Depth mm 300 300 520 580
Shipping weight kg 9 10 15 15
Catalog Number 3315-01 3311-01 3301-01 3301-03
Accessories for the Ultra Clear™ RO Series System Tanks (initial equipment)
Item Cat. No.
Vent Filter VF 1 (2“) to eliminate airborne contamination
– for use in 30 and 60 liter tanks 3510
– for use in 80 liter tanks 3512
Vent Filter VF 2 (4“) to eliminate airborne contamination. For a maximum flow of 1,5m3/h 3511
CO2 Trap CT 1 (2“) to eliminate airborne contamination including CO2 from the incoming air
– for use in 30 and 60 liter tanks 3501
– for use in 80 liter tanks 3507
CO2 Trap CT 2 (4“) to eliminate airborne contamination including CO2 from the incoming air.
3503
For a maximum flow of 1,5m3/h
UV-Submersible Lamp to minimize the bacterial growth for 24 VDC
– for use in 30 liter tanks 2620
– for use in 60 liter tanks 2621
– for use in 80 liter tanks 2622
Bracket ET30 for 30 l tank, including screws and plugs 3317
Bracket ET60 for 60 l tank, including screws and plugs 3318
17
System Components
18
The purification modules are maintenance and service procedure.
accurately designed to ensure An agreement for this service
complete wetting of the activated can be arranged with Siemens Water
carbon to remove entrained air and Technologies.
purge the systems. The storage of
modules is limited and items should be 7. Drainage tubing from any water
used within one year. treatment device should contain an
air gap to prevent contamination. High grade materials are a vital aspect
Modules should be stored in a cool, Maintain at least a 5-cm gap between for highest quality. From left to right:
dry location (< 20 °C) away from the end of the tube and the drain. Activated carbon, anions, mixed bed
light. Freshly produced replacement and cation exchange resins.
modules can always be obtained. Information about reverse osmosis
A natural phenomenon is used for
Pure water water purification
1. High quality pure water can only be The natural osmosis process can
maintained if the produced water is be reversed and used as an
constantly being re-circulated via environmentally friendly and safe
different purification stages including form of water purification.
the sterile filter.
How does reverse osmosis work?
2. A tank for storing pure water should A solution with a high salt
always be equipped with a sterile concentration is separated by a Pre-purification AMB and VMD modules
vent filter, activated carbon unit, a semi permeable membrane from a and conditioning module.
CO2 trap and a submersible UV lamp. solution with a low salt concentration.
A constant high water quality In normal osmosis, the water from The principle of reverse osmosis
level can only be maintained by the side with less salt will begin
implementation of these components. permeating the membrane into the raw water / dissolved salts 100%
more concentrated solution.
3. A regular disinfection procedure
diminishes the formation of Biofilms. In reverse osmosis, pressure is supplied salts
Disinfection should be done on a that exceeds the osmotic pressure of
regular basis. the higher concentrated solution concentrate
H2O
to force water in the reverse direction.
4. To prevent the growth of algae:
semipermeable
Tanks used for storing water should Clean water starts to permeate membrane
be made of opaque material or be through the membrane. This water
placed in a cabinet to prevent exposure contains approximately 98% less salt
to light. Avoid direct sun light. than the inlet water. This technology pure water /
permeate
will also remove >99% of particles dissolved salts
1–2%
5. Purifying modules should be and bacteria.The production rate of
replaced on a regular basis in order to an RO system depends on the water
maintain high quality water and to temperature. Our specifications
minimize possible contamination of are given at a water temperature of Most manufacturers use 25°C
bacteria. 15°C. Each °C of temperature variation to rate their performance,
creates a water production shift of 3%! however, with our systems, you
6. In order to guarantee best water can be assured that your water
quality and operation of the Siemens production is in the right range
Water Technologies’ water systems, even if the temperature falls
the systems should undergo a below 25 °C.
regularly scheduled preventative
19
For more information contact:
Siemens
Water Technologies
globallab.water@siemens.com
HPS-L-SGULTRAROCOM-BR-0710
Subject to change without prior notice.
www.siemens.com/water